1)Check Power supply from Source 2)Check the return path [Neutral (AC) / Ground (DC)] 3)Check for loose connections by pull test (caution:- Switch the PS off before pull test) 4)Check for Short Circuits
If all the modules and contact works fine. It fall in the wire itself diagnostic. Usually the first step is to look for bad connection and wrong wire connection
Thank you for your sound advise, however you may want to consider the fact that today working on a powered panel aside from the SELV/PELV powered panels has become a daunting tasks thanks to OSHA and Corporate lawyers who see the practice of testing a live panel as a source of high risk issues. Thank you any way
Guys i am an Namibian electrician At an zinc and lead mine i want to start my youtube channel and show you really how to do fault finding i just want to ask will yo support it?
1)Check Power supply from Source
2)Check the return path [Neutral (AC) / Ground (DC)]
3)Check for loose connections by pull test (caution:- Switch the PS off before pull test)
4)Check for Short Circuits
🙏🙏🙏
ماشاءاللہ بہت خوب ❤
So super instruction ❤❤
Great video, straight to the point, good information. Thank you.
More troubleshooting videos please 🙏
Best way to check for a short circuit besides checking for Continuity?
Harder to find and more annoying are wires crimped down on the wire insulation inside a terminal block :/
I found that problem a couple days ago. People don’t use ferrules.
If all the modules and contact works fine. It fall in the wire itself diagnostic. Usually the first step is to look for bad connection and wrong wire connection
Wonderful video. As a studen, its so informative.
One time I tracked an issue down to a single bent contact on an ice cube relay. That was fun
Sounds like a fun day
Did you pull the relay while the circuit was live ?
Happy Troubleshooting 👍🏼 thank you 🙏
Hello guys how to print the labels need techniques thank you so much
Thank you for your sound advise, however you may want to consider the fact that today working on a powered panel aside from the SELV/PELV powered panels has become a daunting tasks thanks to OSHA and Corporate lawyers who see the practice of testing a live panel as a source of high risk issues.
Thank you any way
Great content keep it coming
Thanks for the support!
Very well done. Understandable.
Have you a handy dandy Automotive fuse 5v and wire it to the former so nothing trips or blows stormer itself a
Excelente tip, thank you for sharing.
3:07 i believe has two mistake occuring
Missing the other side of some terminal blocks
Guys i am an Namibian electrician
At an zinc and lead mine i want to start my youtube channel and show you really how to do fault finding i just want to ask will yo support it?
Thanks so much!
Difference between industrial maintenance tech and industrial electrician
Excellent work
Thank you!
Thanks for the video.
Good stuff. Thank you.
Glad you enjoyed it
Very Helpfull
Glad to hear that
🙏🙏🙏🙏
Thanks
thank you !
Instalasi listrik power suplai
Nice. 🇵🇰
story telling channel.