With the RC community, they aren't competitors, they're compatriots. And such nice guys too, they are good family men that know how to have fun and still be informative whilst being entertaining. Did their videos have anything to do with me ordering an FCX24? I'm sure it did, although I did get the PowerWagon.
Another great video ! Sorry I'm late but we had a tornado roll through here and we've had no phone ' internet ' cable or power for 3 days and they are saying now the power ( MIGHT ) be on Saturday sometime !
Thanks!! That stinks! We don’t get them often, but we had one of the worst nader events in a while earlier this year and didn’t have power for a few days. Glad you’re ok!!
The truck performed extremely well on your course and the additional weight made a big difference. The truck looks great and I wonder why they selected number 18.You did a very tho right test. I don't think you mentioned if it's waterproof. Keep up the good work.
Thanks!! It says 18th because this is for their 18th anniversary. Thats why it’s a limited edition. These are supposed to be fine for light water I believe, but I don’t mention that much because even when they are waterproof, a lot of times it can still cause issues. Thanks man!!!
I've been wanting a FCX24 K5 for a while, and with the sale this past week, I snagged one. Overall, it's great, but my only complaint is that the stickers are pretty meh. I think I'm going to peel off the 18th stickers and then spray the entire thing with clear coat to seal up the stripes. It runs nice and smooth and looks sharp though! I think I'll also do some weighted wheels at some point. Lastly, I wish FMS had a bit more consistency on what "1/24th" scale is. I have a Smasher, K5 and Range Rover and they're all comically different sized. My kids don't care a bit, but it bothers me when they're all together.
The boy has talent! Super sick video man. I've never been into crawlers before ever, but these past videos you've put up with that course is making me second-guess great content man. Look forward to the next one.
Hey I think you should do a how to video on how to install shocks motors pretty much the whole 9. I'm about to get back into the hobby after being out for atleast 15 years and all I had then was a rtr red cat nitro buggy. Needless to say I didn't mesh the gear right or use any lock tight and fried it all up. Young and impatient lol. Now being older and wiser I still have no experience with doing any of these things correctly since I've never done it and. From the past week of watching and learning stuff from you. I'd hate to have to go watch some brit or someone else to learn these things!
I've already watched his. I'm probably not gonna watch it again, if that's alright? Your crawler course is looking gnarly dude! And little man handled that decline like a freaking champ! He's a way better driver than me, for sure. 😂😂
That rig is dire need of UNSPRUNG weight. This will also lower you center of gravity too. Lots of ways to do that. Could go to your local tire shop and ask to purchase a few strips of stick on wheel weights. Or Amazon will have them too. Just remove the tire and install on the inside of the wheel. Or you could get some of them sooperdooper fancy weighted wheels. Either way, you'll see far more benefits from UNSPRUNG weight rather than to make the chassis heavier and force the shocks to work harder.
LMAO your channel side characters are omnipresent (skeleton), and you and discipline rc have the best quirky editing out of rc youtubers. Random music, random sound effects, elements etc.
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
Nice to see "competitors" working together. Says a lot about the RC community and is a good example for the youth.
Absolutely!! Thanks man and I completely agree!!
With the RC community, they aren't competitors, they're compatriots. And such nice guys too, they are good family men that know how to have fun and still be informative whilst being entertaining. Did their videos have anything to do with me ordering an FCX24? I'm sure it did, although I did get the PowerWagon.
@WorkInLight power wagon!!! Can’t wait to get one one day 😂
The course is looking sick my dude! 😎
Thanks bro man! It will continue getting more obstacles!
The performance definitely improved when you put it into "Max" drive...
Max drive is ALWAYS an improvement, unless it needs an attitude adjustment 😂
Your little cuts and edit are hilarious! Another great crawler video, and way to go on your crawler course!
Thanks!! 😊 glad you like and much appreciated!! 😃😆
Another great video !
Sorry I'm late but we had a tornado roll through here and we've had no phone ' internet ' cable or power for 3 days and they are saying now the power ( MIGHT ) be on Saturday sometime !
Thanks!! That stinks! We don’t get them often, but we had one of the worst nader events in a while earlier this year and didn’t have power for a few days. Glad you’re ok!!
Clever. I see what u guys r doing here
Bringing the fun in twos!!
Nice video! Looking forward to more crawler content! I like the course in the backyard. Jealous
Lots of crawler stuff coming up soon and the course is epic for sure! Sacrificed a lot of blood to the skeeters to build it though! 😂
The truck performed extremely well on your course and the additional weight made a big difference. The truck looks great and I wonder why they selected number 18.You did a very tho right test. I don't think you mentioned if it's waterproof. Keep up the good work.
Thanks!! It says 18th because this is for their 18th anniversary. Thats why it’s a limited edition. These are supposed to be fine for light water I believe, but I don’t mention that much because even when they are waterproof, a lot of times it can still cause issues. Thanks man!!!
I've been wanting a FCX24 K5 for a while, and with the sale this past week, I snagged one. Overall, it's great, but my only complaint is that the stickers are pretty meh. I think I'm going to peel off the 18th stickers and then spray the entire thing with clear coat to seal up the stripes. It runs nice and smooth and looks sharp though! I think I'll also do some weighted wheels at some point.
Lastly, I wish FMS had a bit more consistency on what "1/24th" scale is. I have a Smasher, K5 and Range Rover and they're all comically different sized. My kids don't care a bit, but it bothers me when they're all together.
Oh and the sale was pretty good - $160 shipped from Amazon. Also got a Camel trophy Range Rover FCX24M for $100.
This was great! My 2 favorite rc channels 😂😂. That thing looks sweet brass wheels are a great way to add weight down low 🤘
Thanks! 😂 Seems most people enjoyed it! 😊. Brass is a great way to go!!!
The boy has talent! Super sick video man. I've never been into crawlers before ever, but these past videos you've put up with that course is making me second-guess great content man. Look forward to the next one.
Thanks! I wasn’t either, until I was! May be worth trying a decent cheap one soon and see what you think! Thanks dude!!
Is the car water proof I wanna get one but it snows a lot and I wanna run it outside
Props to the padawan for having you clarify his left or truck left 👍🏼
Dude his genius to age ratio catches me off guard daily!
Not a bad crawler at all 🙂 The crawler course is looking good!
I agree!! Thanks Brad!!!
My blazer was brushless since they first came out fms is a little behind times
The youngster gaining them skills. Keep up the fine work sir.
He is for sure! Thanks!!😊
Never see you driving so calm... :-)))
My finger was twitching ready to blast the whole time 😅
@@DerbyCityRC
😂
Amazing coarse, I bet it took some time to build that.
Thanks!! Some time, a lot of sweat, a couple hundo, and the local skeeters got plenty of blood out of me 🤣
Wow I'm glad you think so:)
Haha! Gonna check yours out after work 😆😊
Hey I think you should do a how to video on how to install shocks motors pretty much the whole 9. I'm about to get back into the hobby after being out for atleast 15 years and all I had then was a rtr red cat nitro buggy. Needless to say I didn't mesh the gear right or use any lock tight and fried it all up. Young and impatient lol. Now being older and wiser I still have no experience with doing any of these things correctly since I've never done it and. From the past week of watching and learning stuff from you. I'd hate to have to go watch some brit or someone else to learn these things!
I've already watched his. I'm probably not gonna watch it again, if that's alright? Your crawler course is looking gnarly dude! And little man handled that decline like a freaking champ! He's a way better driver than me, for sure. 😂😂
Haha! That’s fine I guess. He did handle that perfectly and he’s better than me too so that’s ok 😅
Little feller is getting a lot better at driving these things! Better watch out or he may take over your channel!
He is indeed!! And yes I better 😅
That rig is dire need of UNSPRUNG weight. This will also lower you center of gravity too.
Lots of ways to do that. Could go to your local tire shop and ask to purchase a few strips of stick on wheel weights. Or Amazon will have them too. Just remove the tire and install on the inside of the wheel.
Or you could get some of them sooperdooper fancy weighted wheels.
Either way, you'll see far more benefits from UNSPRUNG weight rather than to make the chassis heavier and force the shocks to work harder.
Yes unsprung weight is better for sure. FMS actually sells aluminum axle housings but lead stick on wheel weights is the way to go for sure!!
That rotten log descent was MINT!
I didn’t realize how great it was until I was editing lol. He slam dunked it!!
Nevwr been one for crawling but i watched the entire video as always, max is gonna own you on that course pops
Thanks dude!! Man he practices on it almost daily while I’m recording intros and outros so ya probably 😅
Very nice indeed.!! 👍 👍 👍
Thanks!!!
Another good one bro. That course is dope. Did you get that new Rlaarlo little truck yet?
Thanks!! Yes I did and finally drove it for the first time yesterday. It was a blast but will be a couple days til video is out.
@@DerbyCityRC I hope you go back to that place with those gnarly jumps.
You need to put out some green slime and make an area 51 sign.
Cool video.
I’m gonna flare up that corse for sure. Your idea is top notch!!
LETS GO 🔥
🎉🎉🎉🎉😱😂✅✅
There you go again… making me watch crawler videos 😳. lol.
You’re welcome 😅
Nienow Highway
Ramps & jumps ! Ramps & jumps !
Lol lol
😆 Definitely coming up!!
@@DerbyCityRC yeah right I can't wait to see that ! Lol
LMAO your channel side characters are omnipresent (skeleton), and you and discipline rc have the best quirky editing out of rc youtubers. Random music, random sound effects, elements etc.
They never leave me alone 😂
Gotta have fun with the editing!! 😄
Young Frank Lee Mark Robinson Richard
Pfeffer Keys
ITS TINY BUT CAPBLE
Not bad for its size just needs heavier wheels/axles!
wrong thumbnail lol
😂😂
lmao.. you also both did 6 minute videos. lol
lol we did! 😆
@@DerbyCityRC ;-p
Wow! I can’t believe you would copy Evans thumbnail Aaron. Not very original!😝
Unreal!!! 😂
@@BangForYourBuckRc Or....did Aaron copy Evans....
RC Bro stuff👌
😂
Absolutely!