Is there a cam position sensor for each cylinder? I have 4 things on the front of my block (Mk2 Avensis) connected to the harness, seems to be 1 module on each cylinder. I do not know what they are.
thank you bro but i am waiting you to install how you clean crank shaft position sensor in corolla which is located under the belt because cleaning this bad boy will affect your spark plugs time and i think this bad sound in the machine will go a way and am really wondered how you dont make video on crank shaft position sensor
@@Bobb2024 My friend today for the first time and with considerable difficulty I removed and cleaned the crankshaft sensor. It is not at all easy to remove this sensor because firstly it is in a difficult position and secondly you have to remove several components (belt, generator, etc.). What worries me the most is the narrow and slightly dark workspace that results in the difficulty of mounting the camcorder. After that I stopped videotaping because I did not like the end result. But I will come back sometime later.
@@YiannisPagonis I am sorry if i made problem to do it but i have corolla 2006 and i just thought it would be same easy and i think if u jack the car up little bit and go from behind the tire maybe that will be helpful because sometimes it comes dirty and i saw a lot of people cars was collecting a lot of metal peices have wonderful days .
@@Bobb2024 Hello my friend. Today I managed for the second time and with enough effort to remove the crankshaft sensor and videotape it. Now I am editing the video and in a few days I will upload it to my channel.
Hi, can somebody please help me, i need to connect the wires of the camsensor without push plugs, i have 3 wires, black, black & white and white, and three holes where they're supposed to get in, which one goes where?
NICE VIDEO THANK YOU - WOULD THIS EFFECT ENGINES THAT START ON COLD START BUT THEN COULD FAIL AFTER A SHORT 5 MIN TRIP? I HAVE INTERMITANT START ISSUE THAT IS NOT FUEL PUMP AND NOT SPARK PLUG, NOT BATTERY, NOT ALTERNATOR. THANKS. SORRY CAPS
P0017 in the Toyota Corolla is predominantly caused by a few different things. It is typically thrown when the Crankshaft Position Sensor and the Camshaft Position Sensor are out of alignment by a certain number of degrees, or if there is an issue with the wiring, or one of the sensors themselves may have gone bad. We’ll explore the symptoms and causes directly below. P0017 refers to which camshaft position sensor is out of time with the Crankshaft. In this case it’s sensor “B”, Sensor “A” throws P0016 P0017 Symptoms: Toyota Corolla P0017 should be considered an important trouble code to diagnose and repair. The crank and cam sensors work in tandem to produce the ideal air/fuel ratio for your engine. When this timing is off, the engine will typically not run (or barely run). Here are the major symptoms of P0017 in the Corolla: Failure to start Rattle coming from the motor Service engine soon light Engine poorly running P0017 Causes and Solutions: Toyota Corolla Here are the most common causes of P0017 in the Corolla, as well as diagnostic advice, and resources to further explore. It’ll either be a wiring issue, or it’ll be a physical problem (bad reluctor or timing chain jumped). Wiring Issues One of the most common causes of P0017 in any vehicle is going to be wiring issues. You’ll want to inspect the wiring harness for visible damage. A lot of the harness leading to and from the Crank/Cam sensors is going to be exposed to hot exhaust and vibration. This is a great place to start diagnosing P0017 in your Corolla. It’s quick and easy to do this before moving on to the sensors themselves. Make sure to check the harness where it plugs into both sensors as well.
Is there a cam position sensor for each cylinder?
I have 4 things on the front of my block (Mk2 Avensis) connected to the harness, seems to be 1 module on each cylinder. I do not know what they are.
There is only one cam position sensor for the entire engine and one for the crankshaft.
Is your Mk2 Avensis diesel?
@@YiannisPagonis Ah I see!
She's a 1.8 VVTi Petrol
Thanks, its been helpful
You are welcome my good friend ❤😊
Happy New year 2022 💖💖
How many camshaft sensor in this engine?
There is only one camshaft sensor my friend
Do you have to recalibrate anything once you replace the camshaft or crankshaft sensor?
No you do not need to do anything
As always ... fantastic video, very informative.
Thank you very much 👍
you're welcome my friend
Happy New year 2022 💖💖
Hello.
Your all videos are commendable.
Superb.
Thanks
You are welcome my friend and always be well.
Happy New year 2022 💖💖
Is this camshaft position intake sensor
Yes it is
Happy New year 2022 💖💖
thank you bro but i am waiting you to install how you clean crank shaft position sensor in corolla which is located under the belt because cleaning this bad boy will affect your spark plugs time and i think this bad sound in the machine will go a way and am really wondered how you dont make video on crank shaft position sensor
My friend my next video will be this (crankshaft position sensor).
@@YiannisPagonis okay i hope so best wishes.
@@Bobb2024 My friend today for the first time and with considerable difficulty I removed and cleaned the crankshaft sensor. It is not at all easy to remove this sensor because firstly it is in a difficult position and secondly you have to remove several components (belt, generator, etc.). What worries me the most is the narrow and slightly dark workspace that results in the difficulty of mounting the camcorder. After that I stopped videotaping because I did not like the end result. But I will come back sometime later.
@@YiannisPagonis I am sorry if i made problem to do it but i have corolla 2006 and i just thought it would be same easy and i think if u jack the car up little bit and go from behind the tire maybe that will be helpful because sometimes it comes dirty and i saw a lot of people cars was collecting a lot of metal peices
have wonderful days .
@@Bobb2024 Hello my friend. Today I managed for the second time and with enough effort to remove the crankshaft sensor and videotape it. Now I am editing the video and in a few days I will upload it to my channel.
Good man thank you very much
You're welcome my friend
Happy New year 2022 💖💖
Nice video
Thank you very much Thank you very much ☺☺☺☺🧡🧡🧡
Happy New year 2022 💖💖
O meu carro está acusando esse sensor, foi feito a troca e continua do mesmo jeito , o que fazer?
Hi, can somebody please help me, i need to connect the wires of the camsensor without push plugs, i have 3 wires, black, black & white and white, and three holes where they're supposed to get in, which one goes where?
NICE VIDEO THANK YOU - WOULD THIS EFFECT ENGINES THAT START ON COLD START BUT THEN COULD FAIL AFTER A SHORT 5 MIN TRIP? I HAVE INTERMITANT START ISSUE THAT IS NOT FUEL PUMP AND NOT SPARK PLUG, NOT BATTERY, NOT ALTERNATOR. THANKS.
SORRY CAPS
Check his MAF sensor, on my van that was the issue, engine shutdown suddenly.
Happy New year 2022 💖💖
This does not match my 2013 Matrix at all. Is this a 2.4 litre engine?
No. It is 1.4 cc, 2008 Toyota Corolla model, VVT-i engine, 97 hp.
Ah, Google failed me again, showing me everything but a Toyota Matrix. I need to learn how to read as well!
@@GordWait My friend, with a quick RUclips search I found that there are not many videos about your Matrix car. Is not that right;
@@YiannisPagonis Yep, oddly very little info online. The Matrix is off to the local mechanic next week.. Ah well!
Happy New year 2022 💖💖
Will this clear a p0017 code?
P0017 in the Toyota Corolla is predominantly caused by a few different things. It is typically thrown when the Crankshaft Position Sensor and the Camshaft Position Sensor are out of alignment by a certain number of degrees, or if there is an issue with the wiring, or one of the sensors themselves may have gone bad. We’ll explore the symptoms and causes directly below.
P0017 refers to which camshaft position sensor is out of time with the Crankshaft. In this case it’s sensor “B”, Sensor “A” throws P0016
P0017 Symptoms: Toyota Corolla
P0017 should be considered an important trouble code to diagnose and repair. The crank and cam sensors work in tandem to produce the ideal air/fuel ratio for your engine. When this timing is off, the engine will typically not run (or barely run).
Here are the major symptoms of P0017 in the Corolla:
Failure to start
Rattle coming from the motor
Service engine soon light
Engine poorly running
P0017 Causes and Solutions: Toyota Corolla
Here are the most common causes of P0017 in the Corolla, as well as diagnostic advice, and resources to further explore. It’ll either be a wiring issue, or it’ll be a physical problem (bad reluctor or timing chain jumped).
Wiring Issues
One of the most common causes of P0017 in any vehicle is going to be wiring issues. You’ll want to inspect the wiring harness for visible damage. A lot of the harness leading to and from the Crank/Cam sensors is going to be exposed to hot exhaust and vibration. This is a great place to start diagnosing P0017 in your Corolla. It’s quick and easy to do this before moving on to the sensors themselves.
Make sure to check the harness where it plugs into both sensors as well.
Happy New year 2022 💖💖
Gracias
Thank you my friend
Happy New year 2022 💖💖
Nic
Thank you
Happy New year 2022 💖💖
hey great video do you have a link to the music you used in this video? thanks
That's sucide music
Happy New year 2022 💖💖
منور يا هندسة اخبارك أيه
Please speak English to understand you
Happy New year 2022 💖💖
mawqie hassas alhararat bialkurla
arkadaşım ne söylememi istediğini anlamadı. Bana söylemek istediklerini aynen tekrar eder misin?
Happy New year 2022 💖💖
Good man thanks you very much
You are welcome and Happy New year 2022 💖💖