Boss GT-100 Expression Pedal Calibration Tutorial
HTML-код
- Опубликовано: 12 сен 2024
- Merry Christmas & Season's best to everyone! 🍻🎁🎄😊
As an extra christmas gift, I have made this Boss GT-100 Expression Pedal Calibration video. It shows how to calibrate the pedal, and how to take control over the EXP SW and the different Wah-selections.
Thanks for all the support so far - I truly appreciate it! This Channel has grown quite a bit this year, and I really hope to continue the journey, when we enter 2019. All of you good people is what makes it possible - so a big "thank you" to all of you! 🎄🎁🍻
As always, let me know if you need anything, I'm always ready to help out.
Happy Holidays & Season's best to you all!
Enjoy this lovely Christmas-time!
Cheers, good people! 🍻🍻🎁🎄😊
![Eminem - Like My Shit [Official Audio]](http://i.ytimg.com/vi/vx_IMvFkrfA/mqdefault.jpg)
Since there are "only" 8 assigns per patch, it is a good idea to have your pedal turn on / off a relevant effect before consuming one of the 8 precious assigns. Another technique is to use the channel select to it's fullest potential. For example, you could put an OD, preamp, EQ and delay onto channel B, then with the num switch, you could simply engage channel B for your lead sound, and you haven't used up any assigns and they can be used for other things.
Sure, that is a great way to take full advantage of the Assigns. Thanks for sharing!
Let me know if you need anything else.
Best regards.
Man, THANK YOU for this tutorial!!!
This is cool
Thank you, I'm happy to hear that!
Let me know if you need anything else.
Cheers.
Thank youu
You're very velcome!
Have a great day.
thank u for the various tutorials on GT100. What is the URL of your web site?
GT100 - How to Set Up clean sound and wah-wah sound easily using pedals
i saw your Wah Activation Assign youtube video but some things are not clear.
1) What is the difference between your method above versus assigning clean sound and wah-wah sound in GT100's foot pedal #1 and #2 respectively?
2) What I would like to achieve is to switch between clean sound and wah-wah sound easily without having to create wah-wah sound on pedal#2.
Is it possible to simply use ACCL/CTL pedal to assign wah-wah sound? If so how is this done?
This way while playing clean sound on pedal#1, I can simply press CTL/EXP pedal to get wah-wah effect.
Hi What is the 'sub expression pedal' and how is it used? Thanks, great video.
Hey there, @Johnny Solipsis 😊
Thanks for your comment and question - I appreciate it!
The Sub Expression gives you the option to add another, external Expression pedal to the GT-100.
It's the same with the Sub CTL.
For example, if you only want the onboard Expression pedal to control volume, then you can add another Expression pedal and use that one for Wah or other things.
That's the function of it.
I hope this helps.
Let me know if you need anything else.
Cheers!
My pharase loop Won't Working.. Some how its deactivate. How i can active? Thanks
Hi there.
What do you want to achieve with the Phrase Loop pedal?
Cheers.
Hey, great info!!! Thanks so much. So I’m looking to replicate the pitch shifter by using the exp pedal. Toe=1octave higher, heel=actual pitch. Any thoughts on this?
Hi!
Cheers, I appreciate it.
That should be doable - did you give it a go?
Cheers.
@@GuitarNTabs yes! actually it's a bit more in the advanced features but it works perfectly and sounds amazing. very smooth transitions.
@@GraphicDesign309 - That's really good to hear! I'm glad you made it work!
Rock on!
Muito bom bem nitido
Obrigado eu aprecio isso.
Tenha um bom dia.
Спасибо, брат, от души
I’ve lost my wah expression pedal activation and I can’t figure out how to get it back! HELP!
Hi there.
I'm not sure what you mean? Have you tried to Initialize the patch, then starting from scratch?
Let me know..
Good day sir my name is teddy from Nigeria I jst got one gt100 version 2 and am finding it difficult to swut h on the expression pedal I watched ur video on how to switch it on and I have done exactly as you did in the video but still is not working the the red light is not reflecting when depressed pls I need you help sir thanks I will be counting seconds till I hear from you thanks
Hello there, Teddy! Greetings to you 😊
Thanks for getting in touch, I appreciate it!
Hmm, it seems strange, if you followed the video, then things should work..
What did you set the Threshold to? Setting it to 1 would make the EXP Pedal easier to activate.
What happens when you press the switch? Nothing at all, or?
Cheers.
Best regards.
In my opinion, 1 is still too high of a threshold for the exp pedal to turn on. You still have to press too hard to switch it on.
Hello brother
I have a question?
Kindly help me out.
How I can adjust paddle for octave solo playing. Suppose I play in fifth fret 3rd string & when I push paddle the solo automatically goes to higher octave.
Suggest please
Hi,
You could use the Pedal Bend fx or perhaps the pitch shifter. You'll have to experiment with it, since some tweaking is required.
I hope this helps.
Best regards.
Hi there, I have a little problem. Usually I made like here for the calibration. But in these days I have some problem with the pitch and when I'm going to calibrate the pedal, the screen say "out of range" and I cannot calibrate yet :( do you think that if I try to dismount the pedal and reput everything in order it will be work. I'm not sure if is it a physical problem or software, but I'm almost sure about the first one. Thank you
Hi there!
That's a strange issue, I haven't experienced that before... I don't know, but maybe a factory reset of the GT-100 will solve things? Just make sure to back-up your patches, if you do.
@@GuitarNTabs thank you so much for the fast reply! Yep, I think I'll try to do the fac reset. Do I just connect to the PC via USB, to save all my patches? I'll look also on the manual, but here is faster :D thank you again! Elia
@@sevenbears - You're welcome!
Sure, it's a good place to start.
Connect to PC, yes, using Tone Studio for GT-100. Then create a LiveSet, in the Librarian tab, and make sure to export the patches, to a folder or place on your desktop, etc.
That should do it.
@@GuitarNTabs perfect, thanks a lot! I'll try also to update until 2.10, now I'm at 2.03
@@sevenbears - Sure, no problem!
Good idea, keep at it 🎸
Cheers!
How to get a realistic humbucker tone with a SSS fender strat and the GT100?
Hey there, @Nagesh Cavatur.
Happy Holidays 🎁🎄
Hmm, that would probably not be easy.. The GT-100 has an effect called "Guitar Sim" - it can be found in the FX-1 and FX-2 block. There is an option to select S --> H - which means it will take a single coil pickup and give it the characteristics of a humbucker.. I haven't used it much, and it will probably not sound that much like a humbucker... since it's not a humbucker guitar.. but give it a try, and see what happens 😊
Experiment with it, and tweak the different parameters.
Have a wonderful christmas 🎄🎁
Cheers!
@@GuitarNTabs Thanks, I am already doing this. Just wanted to know if there was some special setting for achieving this effect. Please let me know if you crack it. A Merry X'Mas and Happy New Year to you.
@@cavaturnagesh - Okay, that's great.
Well, no.. No special settings, etc. If you really want a true humbucker sound, then you'll need a guitar equipped with humbuckers.. It's as simple as that.
Merry Christmas and Happy New Year to you too, Nagesh 🍻👍
@@GuitarNTabs Thanks for the reply.
Hello, men! Good tutorial, but I cannot to find an answer - where I can to set a volume range when a pedal not "switched on" FX? Can u help me with that? I want to define it for one preset to rule a volume when used guitar as a second and for back part
Hi there.
I'm not sure I understand what you're trying to achieve?
Can you provide a little more detail?
Thanks.
@GuitarNTabs yeah, sure! If simplify - I want to range volume from 30% when pedal totally released - to 100% when totally raised, on some separate preset. Is it possible?
@@coverslyfestyle8470 - Hi again.
I'm very sorry for my late reply, I've been behind on answering comments...
Aha, I see. You need to do the following:
Press the "effect" button and scroll until you see "FV". Then on the right hand screen you set the Volume Min to 30 and the Volume Max to 100.
Leave the Volume Curve at Normal.
That should do it.
Again, I'm sorry about my late reply.
Best regards.
My problem is that when i go to write the minimum calibration all the way down and write it just says "out of range: set again".
But the pedal is simply depressed to the minimum. Just normally, no crazy force or anything! What can I do? It ruins everything?!
Hi there.
Thanks for your comment and question.
Check to see, if any global parameters are set differently from the factory settings, or perhaps try a factory reset of the unit.
That's where I would start, to see if that solves the issue.
I hope this helps.
how to set pedal for volume up and down
Hi,
By default it should already be set to act as a volume pedal.
If it's not, then go into the signal chain, and find the FV icon, and make sure it's set to Volume.
I hope this helps.
Cheers.
How can I set a flanger in manual mode. Gt100
Hey @Kenneth Spivey - Merry Christmas 🎁🎄
How you can set a flanger? What exactly are you refering to?
How you can activate a Flanger in Manual Mode ? With one of the footswitches, or?
If you could explain your question a little more, that would be great 😊
Looking forward to hear from you.
Cheers.
@@GuitarNTabs . Merry Xmas! I'm using my gt100 like individual stomp boxes. Example.... Pedal two is delay. Pedal three is chorus.. I would like to set flanger to number one. Thx for advice
@@kennethspivey1047
You'll have to asign the flanger to FX 1 or 2 and place it wherever you desire it in the chain. Then you'll configure one of the pedals to FX 1 or 2; whichever one you assigned the flanger to. If you configure say pedal 4 to the flanger FX, then pedal 4 will be the flanger switch in manual mode.
@@koonyamob thx I will give that a try
@@kennethspivey1047
Sure!
Let me know how it goes
Is it just for a single patch or for all the tones
You can do both - in this video it's just for that particular patch. 😊
Hi man, hope you're still doing things with the gt100.
Q: could you do a tutorial on using the expression pedal to change parameters gradually.
So, lets say in a solo, from heel back position you can increase O/D gain and delay
by toeing the pedal forwards. Hope thats clear. Thanks in advance.
Hello there, Shirley.
Sorry for the late reply...
I understand your question, and I will add it to my video list for the GT-100, no problem.
Let me know if you need anything else.
All the best.