This has to be one of the best video I've seen.. I told my wife if we lived in the same town this guy could be my mechanic.. and that is saying something because I struggle with letting someone else work on my vehicles. Note when I worked on Big Trucks to remove the race I just put a little weld bead around the race, let cool and it basically falls right out..
I just stumbled upon your channel. Very impressed with your work. You are meticulous and thorough. No half assery here. I subscribed, and will probably watch all your videos..thank you brother.
I noticed that you had a hard time getting that inner race in. I have used your method before, using the old race to drive the new race down. What I did was cut the old race with the thinnest cutoff wheel I had, this allowed the old race to still have the same dimensions as the new race (therefore ensuring there is no damage to the new race) and the little cut allows the old race to "squeeze" together ever so slightly and continue driving down the new race. It is easy to remove, a couple taps on it and its out. This enables you to get the new race driven down without having to use a punch!
I am jealous of seeing a 13 year old truck with only what amounts to a little surface rust. Ten year old trucks I work on here in Wisconsin look like they are going to fall apart underneath.
bop-1 Really nice video! Clear and straight information. Having bent a wrench for years until the rotator cuff gave out and went into the parts end I appreciated him taking time to sign for the parts on another job. And no "special" tools in use. Thank you for a great video.
Great class. From an old man think about wearing hearing protection. My hearing aids cost 6,000 dollars in 1022. I knew but didn’t do it. Good hearing protection is about 50.00. Thanx for the class!
I love how chill this is but man definitely looks like you could use some lights in that shop! Oh and one thing using a small tipped hardened punch like that I’ve seen people who weren’t careful leave scratches which isn’t a huge deal for where it’s at but I use a flatten cold chisel! That’s just fir those guys who tend to get over aggressive on things! Thanks for the good content!
I love the detail and very well explained, you did an awesome job on video, thank you. I have the same exacted truck but four door. I just wish mine was rust free like that one, I live in rust belt country, ( Minnesota )
Very clear and the video keeps moving. Maybe you should go to Hollywood. Your vid is more interesting that a lot of movies out there. Two things a like a lot, your voice is clear and the volume is even and your use of the magnetic LED work-lamp shows what you are doing very well. Keep up the good work.
I've done dozens of these Sterling and Dana 60/70 style axles.Usually in the dang woods in the middle of a mud hole lol. I always change race and bearings as a set unless it's an offroad hooptie. Freeze the race and heat the hub with a hot air gun or torch a lil, they fall right in. Every 100 degrees its thousandths of an inch, works like a charm. You will hear a pitch change when that race is flush. And yes, get the spindle nut socket, gotta set bearing preload. Over tighten, loosen it up, then set preload, Just about everyone I've seen the nut was chewed to hell by a nit nit with a chisel lol,( guilty of it myself) Love the way you clean the tar out of everthing. Just bought a tub of caliper grease..frickin $20!!, but should last a while. Bout 28lbs on caliper bolts. Ive always used neverseize on em..yea yea I know but NEVER had one back off. Too much rust on our vehicles not to use neversieze. Funny I do all my buddy's garbage truck repairs haha. Great job as usual Brother...keep em comin!!
Nice video. Don't think I will spray the hub down with degreaser after installing the new bearings though. Definitely got some degreaser on the new bearings...
American axel told me just do the seals because they are so over built the bearings would be fine just do seals and buy them straight from American axle they work the best and I did and a great bunch of guys !!!
Really enjoyed the video buddy, looks like it might have been a bit of a job but when you have all the right tools it goes together much better, was that the Harbor Freight light you were using, great video as always.
Brother great fucking video!! When I get back home I'll be doing the same shit to my 3500, can't do shit when you're deployed over seas deterring aggression lmao! you got a fan from here on out brother take care.
Love the fact that you took it all the way down to the race you're in there replace it all only gripe is did I really see you Vise it by the studs? Great work regardless
TwiZ1975cj5 for sure but really it's a stud you don't want to have to go through all that again to pull it apart replace two studs because it got boogered-up that you didn't know was boogered up until you put a lug nut on there and it got tight putting it on
boostedKTM it wouldn't have completely ruined them to the point where I had to do the job over again I would just run a thread chaser over the studs and clean them up
Nice Vid man. I like using the old race to drive in the new race as well. I hit the OD of the old race on the bench grinder to remove a bit of material so it doesn't get hung up in there while driving in the new one. I also anneal it because I found it was denting up my hammer face and figured it will probably be nicer to the new race as well. I'm not working on all sorts of different vehicles, so it's worth my time to do it. I also install them on the concrete floor as you can really tell / hear when they are fully seated.
I liked very much the in-depth detailed video. Sometimes the littlest of things can be missed. Every detail and sometimes angle counts. I also liked you naming your tools. At some point I was wondering what brand of impacts you were using but, later in the video you named them. At first I didn't know what you were cleaning with but, at some point the can was in front of the camera and I was able to read it. Thank you for your time and effort with this video. I really enjoyed it. I have only one question. Do you know where I can rent the hub puller and bearing race tool? Or maybe but them?
good video. why do you have to loosen the outer bearing nut after you tighten it? is it supposed to be that lose? thats like 0 preload on the bearings. I'm about to do this on my truck so I'm watching/reading everything I can.
When working on cars we always torque down bolts to secure the installed part and develop that mindset. Roller type bearing doesn't get torque down. I tightened the nut to set the bearing preload, then back the nut off. The nut is there to keep the bearing in place and will usually have some sort of locking set up to keep the nut from moving. hope this helps, any further question head over to bryan916.com ( nut should never exceed 20ft lbs)
Bryan how many miles did this truck have on it when the seal started leaking? I have an '04 Ram 2500 with the same issue and it has less than 69K on the odo. Likely started leaking due to lack of driving it and the seal deteriorated.
I think this is what im about to do. It looked like that bearing was shot. Thats what im expecting to find. Felt like my whole wheel was going to flop off
He knows and said you do things in pairs. He's not wrong but I would have left the bearings alone or replaced both(sides) of them. The other thing is not replacing those gear oil soaked e-brake pads. Which I thought was odd because he did bearings. Odd not wrong. He made a great video.
Good morning.I just changed the rear wheel seal and break caliper on my 2017 Dodge Ram,6.4 hemi because it had a leak but it's still leaking.Any advice.
How do you know if the grease would change the properties of the gear oil? Do we want grease mixing in with our diff? I would not.. if the gear oil is spec'ed for high pressure gears, I would hope it would be able to lube the hub bearings.
@@hondaguy425able packing bearings with grease is ok, but if you dont pack them make sure you park truck on a tilted angle both ways so that lube travels to both bearings.....do not travel long straight distances before doing this.
My 2008 3500 4X4 Ram has this exact same set up. I noticed there is approximately 1/4 inch of play when you rotate the hub assembly left and right. That is to say clockwise and counterclockwise. This is occuring on the drivers side only. The passenger side seems to have zero play. Does anyone know if this is normal? The differential is limited slip and the truck is stock. Vehicle has 105,000 miles. If this play is not normal, is it likey to be worn splines where the shaft enters the differential? I have not taken it appart. I noticed this when changing the rear brake pads. Thanks.
You should have zero play in your hub! This could be caused by a few things. The most likely cause is wheel bearings, but you never know until you take it apart and inspected it!
@@Bryan916 Thanks for the quick response. Just to conform, the play is when you rotate the hub. IE. When you grab it and rotate it. When you are spinning it by hand. There is no play up and down or in and out. If that makes sense. The play occurs without the drive shaft turning. Thanks again.
@@davidsine4390 Mine is the same way but on the passenger side instead of the driver. Wheel bearings have no effect on that lol it would be something inside the differential. I'm guessing it's because of the limited slip or posi trac that makes one side feel tight and the other has some play. The play you feel is just the backlash between the ring and pinion gears.
How does a guy get at the seal and bearing that is down the shaft can ya access it through the cover plate on the pumpkin or do ya need a special tool to get at it??? Thanks.
@@Bryan916 I've learned to put the inner races in a freezer overnight and pop them in the next morning. Outer races I put on a hot plate (not open flame) and slide them onto shafts where necessary. But it requires a bit a time.
Bryan916 It certainly helped me when I pulled wrenches in a heavy truck shop. I do it every time now when changing pins and bushings on excavation equipment.
Those bolts take a lot of work to get out because they are covered in thread locker compound. They WILL work loose if you don't use any. A full sized corded 3/4 impact would take as long to run those bolts out. It's not his tool. It's the bolt. I did two sets today.
You didn't debur the race seats from your punch marks, so I doubt they were properly seated. Just spray the new bearing with break clean after the half ass bearing preload job. Red lock tight on the axle bolts ... for fuck sake blue is plenty strong enough. People do not follow these steps you'll be redoing the job. Hack job at best
Stupid points you tried to make! First off novice There's no burs on the race seat try again! 2nd everything was clean with brake clean thoroughly. 3rd this truck is used to haul very heavy loads red Loctite is more then appropriate for this application besides the factory threadlocker from Chrysler is extra strong so Come back with more valid points amateur!
your ignorance is showing. the facing where he punched it out is NOT the sealing surface. it seals on the same I.D. as the race does. i applaud the OP for making this.
30 year mechanic here. This guys pretty good. Nice to see.
This has to be one of the best video I've seen.. I told my wife if we lived in the same town this guy could be my mechanic.. and that is saying something because I struggle with letting someone else work on my vehicles.
Note when I worked on Big Trucks to remove the race I just put a little weld bead around the race, let cool and it basically falls right out..
I just stumbled upon your channel. Very impressed with your work. You are meticulous and thorough. No half assery here. I subscribed, and will probably watch all your videos..thank you brother.
Thanks, Brother I appreciate the positive feedback!
I noticed that you had a hard time getting that inner race in. I have used your method before, using the old race to drive the new race down. What I did was cut the old race with the thinnest cutoff wheel I had, this allowed the old race to still have the same dimensions as the new race (therefore ensuring there is no damage to the new race) and the little cut allows the old race to "squeeze" together ever so slightly and continue driving down the new race. It is easy to remove, a couple taps on it and its out. This enables you to get the new race driven down without having to use a punch!
Thanks for the Tip!
Good idea!
I am jealous of seeing a 13 year old truck with only what amounts to a little surface rust. Ten year old trucks I work on here in Wisconsin look like they are going to fall apart underneath.
Her in Pa. its the same way
Same in New England. 😮. I tell people they will get 5 years if not cleaned and coated…
man I wish we had a mechanic like you around here, you seem to really care about the repairs you do and like your job
Bryan, you work meticulous and neat, and with a steady flow. I like that.
Not only do you do quality work, you do a grade a step-by-step how to!
Man unbelievably super thorough I wish I was half as patient...
Good Job Brother! Greetings from Canada, I'm doing this job tomorrow and this was my Schooling of the Day! Thanks
Bryan Rodriguez I did one today. Was my first time.
Garrett Vaughn There U Go!!! Hopefully everything went ok! Watching this video really helped me a lot! 👌
I have done this professionally for many years. This man is very careful to do it right
bop-1 Really nice video! Clear and straight information. Having bent a wrench for years until the rotator cuff gave out and went into the parts
end I appreciated him taking time to sign for the parts on another job. And no "special" tools in use. Thank you for a great video.
there was no reason to replace the race and/or bearing otherwise it was a goo
d vidieo
Great class. From an old man think about wearing hearing protection. My hearing aids cost 6,000 dollars in 1022. I knew but didn’t do it. Good hearing protection is about 50.00. Thanx for the class!
I love how chill this is but man definitely looks like you could use some lights in that shop! Oh and one thing using a small tipped hardened punch like that I’ve seen people who weren’t careful leave scratches which isn’t a huge deal for where it’s at but I use a flatten cold chisel! That’s just fir those guys who tend to get over aggressive on things! Thanks for the good content!
It's like a restaurant What you don't see you don't know brahhahaha
Always buy your parts from the manufacturer and they have best prices and fit and last a lot longer. I found this out with their U joints and seals !!
I love the detail and very well explained, you did an awesome job on video, thank you. I have the same exacted truck but four door. I just wish mine was rust free like that one, I live in rust belt country, ( Minnesota )
Really appreciate long repair videos; please keep them coming when you can. I understand videos aren’t your primary revenue source.
Very clear and the video keeps moving. Maybe you should go to Hollywood. Your vid is more interesting that a lot of movies out there. Two things a like a lot, your voice is clear and the volume is even and your use of the magnetic LED work-lamp shows what you are doing very well. Keep up the good work.
Thanks, John!
I followed this today to change my bearings and seals. There is a timken kit with tools that has everything you need. Thank you!!!!!
Please do let me know where to find this kit! Hopefully theres one for a 2014 2500.
Torque King 4x4
I've done dozens of these Sterling and Dana 60/70 style axles.Usually in the dang woods in the middle of a mud hole lol. I always change race and bearings as a set unless it's an offroad hooptie. Freeze the race and heat the hub with a hot air gun or torch a lil, they fall right in. Every 100 degrees its thousandths of an inch, works like a charm. You will hear a pitch change when that race is flush. And yes, get the spindle nut socket, gotta set bearing preload. Over tighten, loosen it up, then set preload, Just about everyone I've seen the nut was chewed to hell by a nit nit with a chisel lol,( guilty of it myself) Love the way you clean the tar out of everthing. Just bought a tub of caliper grease..frickin $20!!, but should last a while. Bout 28lbs on caliper bolts. Ive always used neverseize on em..yea yea I know but NEVER had one back off. Too much rust on our vehicles not to use neversieze. Funny I do all my buddy's garbage truck repairs haha. Great job as usual Brother...keep em comin!!
I would guess there is a torque spec for each step also.
Like the video, perhaps in the description in the future you could list Part Numbers used
Great video, Thank you Sir!
Great and thorough job. I’d let you work on my truck!
Nice shop bro 😎 ... Nicely done ... Tools box tours is Nice too ... Over it nice ... LOL 😂😂
Good video! Thanks a lot 🤟🏽
Great video. Thanks for sharing.
Great work Bryan 916!
Thanks god bless
Anyone know the part number to the tool for the wheel bearing socket or the torque used to set the bearing preload?
Awesomely great thanks for your help please do front rotor please thanks 🚚
appreciate the walkthough bro
Definitely like it at 32:14 , sorry good video thank you
Nice video. Don't think I will spray the hub down with degreaser after installing the new bearings though. Definitely got some degreaser on the new bearings...
nice video, thanks
American axel told me just do the seals because they are so over built the bearings would be fine just do seals and buy them straight from American axle they work the best and I did and a great bunch of guys !!!
Really enjoyed the video buddy, looks like it might have been a bit of a job but when you have all the right tools it goes together much better, was that the Harbor Freight light you were using, great video as always.
Yeah, i use that light every day its been a really good buy thus far!
Good job 🍺😎👌🇺🇸
Damn good video and information - Thank you
Good job on video!
zero rust , must be nice workin on stuff like that all the time .
Working at les schwab we always just use a dead blow hammer and hit it on the meat of the rotors. They come off quick.
Richard Cowtails yeah that method works well however this rotor was way beyond that!
Brother great fucking video!! When I get back home I'll be doing the same shit to my 3500, can't do shit when you're
deployed over seas deterring aggression lmao! you got a fan from here on out brother take care.
Love the fact that you took it all the way down to the race you're in there replace it all only gripe is did I really see you Vise it by the studs? Great work regardless
I didn't even realize I did till I watched the video Lol!
Ehh...aint gonna hurt it none,,,aint like ya did the 200 pound gorilla on the vise
TwiZ1975cj5 for sure but really it's a stud you don't want to have to go through all that again to pull it apart replace two studs because it got boogered-up that you didn't know was boogered up until you put a lug nut on there and it got tight putting it on
boostedKTM it wouldn't have completely ruined them to the point where I had to do the job over again I would just run a thread chaser over the studs and clean them up
Exactly. Those studs can take a fair amount of abuse
Great video lots of help were did you get that light???
www.harborfreight.com/390-Lumen-Magnetic-Slim-Bar-Folding-LED-Work-Light-63958.html
Nice Vid man. I like using the old race to drive in the new race as well. I hit the OD of the old race on the bench grinder to remove a bit of material so it doesn't get hung up in there while driving in the new one. I also anneal it because I found it was denting up my hammer face and figured it will probably be nicer to the new race as well. I'm not working on all sorts of different vehicles, so it's worth my time to do it. I also install them on the concrete floor as you can really tell / hear when they are fully seated.
wheres the protection for the studs?
You saw the tire go back on with all 8 lug nuts with no problems what so ever, so that makes your comment meaningless marvin!
Subbed. Good video
I liked very much the in-depth detailed video. Sometimes the littlest of things can be missed. Every detail and sometimes angle counts. I also liked you naming your tools. At some point I was wondering what brand of impacts you were using but, later in the video you named them. At first I didn't know what you were cleaning with but, at some point the can was in front of the camera and I was able to read it. Thank you for your time and effort with this video. I really enjoyed it. I have only one question. Do you know where I can rent the hub puller and bearing race tool? Or maybe but them?
very helpful.
Ingersoll is King. I also have one of those impacts.
Yes Sir!
good video. why do you have to loosen the outer bearing nut after you tighten it? is it supposed to be that lose? thats like 0 preload on the bearings. I'm about to do this on my truck so I'm watching/reading everything I can.
When working on cars we always torque down bolts to secure the installed part and develop that mindset.
Roller type bearing doesn't get torque down. I tightened the nut to set the bearing preload, then back the nut off.
The nut is there to keep the bearing in place and will usually have some sort of locking set up to keep the nut from moving. hope this helps, any further question head over to bryan916.com ( nut should never exceed 20ft lbs)
great video, nice mag lite. where can I get one? thanks
Harbor Freight. www.harborfreight.com/390-lumen-magnetic-slim-bar-folding-led-worklight-63958.html
Bryan how many miles did this truck have on it when the seal started leaking? I have an '04 Ram 2500 with the same issue and it has less than 69K on the odo. Likely started leaking due to lack of driving it and the seal deteriorated.
Im not using enough brake cleaner apparently...
Took me 2 days to watch this. J/K LOL Did you get your new lift installed yet?
I guess no one likes hitting that thumbs up button huh?
Gotta get some long repair vids in too for those who like them,
thanks for not hitting the thumbs down!
I think this is what im about to do. It looked like that bearing was shot. Thats what im expecting to find. Felt like my whole wheel was going to flop off
Where are all the keyboard warriors and trolls to tell him he is a hack and he did everything wrong?
Not saying he did, but that is what I expect from the comment section.
He knows and said you do things in pairs. He's not wrong but I would have left the bearings alone or replaced both(sides) of them. The other thing is not replacing those gear oil soaked e-brake pads. Which I thought was odd because he did bearings. Odd not wrong. He made a great video.
What kind of gear oil is recommended for this 8 Lug Turbo Diesel SLT my friend? We have the 6 Speed Manual.
Amsoil 75-90 GL-5?
Any 75-90 gl5 rated oil
Good morning.I just changed the rear wheel seal and break caliper on my 2017 Dodge Ram,6.4 hemi because it had a leak but it's still leaking.Any advice.
İ have same problem, did you find a issue ?
Worn spindle or damaged the seal on install
Keep up the good work
what is the name of the impact driver you are using? Thanks
Ingersoll Rand W5132-K12 IQv20 Series Cordless Impact
amzn.to/2F5qYiG
Good video but I'm surprised that you used gear oil instead of packing the bearings with bearing gease
Will Flannéry the bearing is inside the axle and lubricated with gear oil . Grease used in wheel bearing.
Isn’t it a oiled bearings not greased would be my guess is why he didn’t pack it with grease
Are those bearings ok with just gear oil i thought they had to be packed with grease?
Edward Duran these bearings are lubricated with gear oil from the differential not packed with grease.
Im in tech school and i have seen instructors and other students pack them with grease before installing strange.
How do you know if the grease would change the properties of the gear oil? Do we want grease mixing in with our diff? I would not.. if the gear oil is spec'ed for high pressure gears, I would hope it would be able to lube the hub bearings.
@@hondaguy425able packing bearings with grease is ok, but if you dont pack them make sure you park truck on a tilted angle both ways so that lube travels to both bearings.....do not travel long straight distances before doing this.
AMLO MEXICO SIEMPRE CONTIGO 😼😼
I didn't know it butt my truck was born in Mexico 😊 wonder what town 🤔🍺😎👍
My 2008 3500 4X4 Ram has this exact same set up. I noticed there is approximately 1/4 inch of play when you rotate the hub assembly left and right. That is to say clockwise and counterclockwise. This is occuring on the drivers side only. The passenger side seems to have zero play. Does anyone know if this is normal? The differential is limited slip and the truck is stock. Vehicle has 105,000 miles. If this play is not normal, is it likey to be worn splines where the shaft enters the differential? I have not taken it appart. I noticed this when changing the rear brake pads. Thanks.
You should have zero play in your hub! This could be caused by a few things. The most likely cause is wheel bearings, but you never know until you take it apart and inspected it!
@@Bryan916 Thanks for the quick response. Just to conform, the play is when you rotate the hub. IE. When you grab it and rotate it. When you are spinning it by hand. There is no play up and down or in and out. If that makes sense. The play occurs without the drive shaft turning. Thanks again.
@@davidsine4390 Yeah that's a problem, especially at high speeds. I would look into it!!!
@@Bryan916 Will do and will report back with my findings.
@@davidsine4390 Mine is the same way but on the passenger side instead of the driver. Wheel bearings have no effect on that lol it would be something inside the differential. I'm guessing it's because of the limited slip or posi trac that makes one side feel tight and the other has some play. The play you feel is just the backlash between the ring and pinion gears.
How does a guy get at the seal and bearing that is down the shaft can ya access it through the cover plate on the pumpkin or do ya need a special tool to get at it??? Thanks.
and now....... for some more brake clean.... lol great vid. why not wheel bearing grease instead of gear oil??/
These bearings are inside the axle and lubricated with gear oil!
Wow , there are tools built to put races in???
Calm down the races went in just fine!
What ever gets the job done with out damage.
@@Bryan916 I've learned to put the inner races in a freezer overnight and pop them in the next morning. Outer races I put on a hot plate (not open flame) and slide them onto shafts where necessary. But it requires a bit a time.
@@petegiesbrecht6228 I've heard of guys using that method. I personally have never used that method does it really work well?
Bryan916 It certainly helped me when I pulled wrenches in a heavy truck shop. I do it every time now when changing pins and bushings on excavation equipment.
Primero....
Lol!
Bruh get a Milwaukee fuel impact
Those bolts take a lot of work to get out because they are covered in thread locker compound. They WILL work loose if you don't use any. A full sized corded 3/4 impact would take as long to run those bolts out. It's not his tool. It's the bolt. I did two sets today.
You didn't debur the race seats from your punch marks, so I doubt they were properly seated. Just spray the new bearing with break clean after the half ass bearing preload job. Red lock tight on the axle bolts ... for fuck sake blue is plenty strong enough. People do not follow these steps you'll be redoing the job. Hack job at best
Stupid points you tried to make! First off novice There's no burs on the race seat try again! 2nd everything was clean with brake clean thoroughly. 3rd this truck is used to haul very heavy loads red Loctite is more then appropriate for this application besides the factory threadlocker from Chrysler is extra strong so Come back with more valid points amateur!
your ignorance is showing. the facing where he punched it out is NOT the sealing surface. it seals on the same I.D. as the race does. i applaud the OP for making this.