C'mon man black guitars aren't boring, there is a reason plain black are the most purchased by metal players! (sometimes they just cost more than the other colors in the same model)😂Pretty bold of you to give it such a makeover, turned out nice!
Thanks dude, I’m glad you like it! Don’t get me wrong, I’m not saying I think all black guitars are boring, far from it. I love black guitars that have a little bit of something to them. This one just didn’t do it for me 😂 Now it’s much more my taste!
Man your channel deserves a looooot of following, the quality is just top notch, and you are a quite good entertainer, the fastest 11 minute of my life dude💪🏻💕
Mate, it’s comments like this that keep me going, I appreciate it massively. Thank you 🙏 Working on the entertainer part ‘cause I struggle being in front of the camera, so that means a lot that you enjoy the videos 🤘
That's so cool! I'd never thought to see how it'd be named 😁 Thanks man, that's a really cool comment and what I'm gonna tell folks it is now haha Appreciate you watching 🤘
Fair play repainting a perfectly fine Ibanez. On camera it does look better in Yellow with the black pickguard, you don't notice any of the imperfections you mentioned. Loving the content and production quality. Looking forward to more videos this year :)
Thanks Livesey, it means a lot to me that you check out my stuff and enjoy it! I’m really chuffed with how it turned out. In the flesh it looks great from a couple of feet away but any closer than that and you start to notice the problems but it’s become one of my favourite guitars. I just vibe with it a bit more now if that makes any sense at all 😂 Thanks again mate, appreciate you dude! 🤘
About that crack, I had a similar situation with a respray that I did on my old Ibanez Roadstar ll bass. That bass had been modded from the original “Musicman-style” pickup load-out to a “Precision-jazz” load-out and then back to the original set up but with an EMG! The initial mod used a block to fill the hole and was then resprayed with a Rolls Royce paint (metallic - iron grey) that was kicking around a mate’s paint shop. During the respray, the block moved due to a reaction between the glue (used to set the block) and the paint. It stopped moving but the block stood proud. It was such a gorgeous colour that I decided to live with it. The rest is history & it is now white and fretless! It still retains that large EMG soapbar with a stainless steel p’guard to cover up all ‘deformities’! Does the crack follow the line of the neck? If it does, it might be the joint between the pieces of wood used to construct the body??🤨 So Jack, have you ever considered fretless guitar?
Ah interesting! That sounds like a killer bass mate! The crack comes out diagonally from the switch route. The only explanation I can think of is possible shrinkage of the paint or something like that. I dunno, but I can definitely live with it too now it’s stopped growing 😂 I have never touched a fretless guitar! I’d like to try one but I definitely feel like their reserved for people more talented than myself haha Thanks for watching mate 🤘
When I said along the line of the neck, I meant parallel to the line of the neck. I have modified most of my basses in some way or other. I have done a few guitars too and successfully created a couple of parts-casters, but sadly I am not a competent guitar player due to lack of radial twist in my lower left arm. Dude, I enjoy your playing and your apparent honesty. It’s quite refreshing! Your streams are definitely going down the right route and have a very professional feel of a seasoned streamer - keep it up! As for your ability as a “personalising” modder, check out a fellow You Tuber, Tim Woodford of Woodford Instruments, he is the real deal as far as a superb & honest luthier can be. You get the impression that there isn’t anything he can’t fix or repair! Love & peace, Bruv!
Ah I see! No it doesn’t seem to be. It’s a fairly long and curved crack/split that doesn’t seem to follow any real rhyme or reason. That’s cool man, modding your instruments is such a great thing. Putting your own stamp on something is always super satisfying. And I really do appreciate the kind words, it truly means a ton to me. I’m still working all this stuff out so it makes me really happy knowing I’m doing something right, thank you. I recognise the channel name, I’ll have to have a bit of a dive in later. Thanks for the suggestion! Cheers bro, you’ve put a smile on my face 🤘
I’ve recently got one of these sounds amazing but definitely gonna upgrade some parts on it such as the hipshot tail piece and hipshot locking tuners and maybe a new nut
Thanks mate, I appreciate the feedback. It really helps! I’ll consider that when I’m working on the next one 🙏 I use Montana gold graffiti paint and varnish. They’re a nitro blend and really hard wearing. Basically, I just sprayed it on 😂 No special tricks, just me in the garage spraying a guitar!
I basically did exactly the same thing as I did for the body dude, sanded and sprayed with Montana Gold paint. From their, I clear coated it, printed a waterslide decal of the logo and sprayed over that when it was added. Hope that helps mate and thanks for checking out the video! 🤘
i have the same exact guitar, wonderful instrument! altho either my eyes are playing tricks on me, or my binding is not as white as it should be. 0 smokers in the house too. wonder if im just losing my mind
They really are great guitars! Just a personal taste thing and my constant need to customise stuff that drove me to this 😂 If you’re talking about the neck binding, mine was slightly off white too and I believe it’s because of the finish on the neck. Either it aged slightly or wasn’t totally clear in the first place but sanding through it brought my binding back a bit whiter. Cheers for watching 🤘
Doood you’ve absolutely got the chops to play in the Jared Dines shred collab 😮 if that was improv can’t wait to hear what you can do with a plan for the solo 🤘
Mate, I massively appreciate the vote of confidence. Thank you. Being totally honest, I'm not confident enough in my playing to be a part of that yet. Maybe I'll throw my hat in the ring next year 😅
@@JackTaylorGuitars you and me both my dude 😅😬 Edit: I mean I’m not confident enough in my own abilities either but I’m hoping I’ll be able to take a shot next year 😬 realised that was kinda vague
Reminds me of the Transformer Bumblebee. I was wondering how you preserved the Ibanez logo on the headstock? Would you please reveal that to me? I am considering doing something similar to an Ibanez someday.
I had to make a brand new logo dude! I used printable waterslide paper and applied that as a transfer, then clear coated over the top to protect it. Thanks for checking out the video mate 🤘
@@JackTaylorGuitars Thanks for the reply. I didn't even realize that was possible. I saw another video where a guy had redone an Ibanez and he ordered a logo for it from Ibanez.
I didn’t know you could do that 😂 That might have been much easier, though I guess it’s not very hard to do the transfer thing really either. Hope you have some success when you do yours mate!
@@JackTaylorGuitars , thanks Jack. I was considering trying to perhaps find the neck I want and then see if I can't find a body i really like, from a less expensive guitar, where the finish is really nice, then put the hardware on it I want, then finish setting it up the way I want. I just bought an Ibanez GRG and if it suits my playing well enough, I may just do a few minor things to it and call it a day. On the other hand, I do enjoy luthier work and will need something to do when I am retired. Perhaps I can do custom setups. Thanks again for the reply.
Sounds like a great project mate and doing setups or a bit of tech work would be a nice way to spend your time I reckon! No worries at all, thank you for watching and commenting dude! 🤘
Where did you get the pickguard? Was it made specifically for this model? I'm looking to mod my RG421MSP in a similar way and am looking at a RG350 pickguard for it.
Hey mate! It wasn't, it was just a cheap Ebay purchase. I searched Ibanez RG HH scratchplate and found one that looked like it would fit. Thanks for watching dude! 🤘
Nice work, mate! That thing's a beaut now! That thing turned out looking almost like the Bright Yellow version of the guitar I have, the RG331M, apart from the fretboard that is. Ibanez should make more fixed bridge RG with scratch plate/pickguard more often, for ease of modification. I appreciated the fact that 99 percent of the soldering I did on my RG, when I was installing the P-Rails, were outside of the guitar. And that was a brave (or rather foolish) thing I did, because it cost me all of my savings at the time, meaning I could not get a tech to do it for me. The pickup set was a deal that I would never get again if I screwed it up (it would have cost twice of what I paid, if I had to import from the US or Thomann), and I haven't soldered for ages at the time (nor was I proficient at soldering either), so I took a risk, and I'm glad that it turned out well. I had no choice, due to the stock pickup had died and it was (and still is my only) "playable" guitar. I'm glad that you didn't have do extra drilling on the body, or on the bridge plate, or having to do repositioning work for the new bridge. My guitar has the Gibraltar Standard I (the bulkier version), yours a Standard II, which I believe, the Hipshot Ibby bridge being a drop in replacement. Sadly that wasn't the case for me, and due to that slight complication, the Standard II bridge I bought last year, is not in use atm and I've decided to just keep the bridge stock for now.
Thank you dude, that’s really kind of you to say! I’m glad you like it 🙏 Absolutely agree, more fixed bridges with a scratchplate would be really good to see. Sounds like you had quite the job on with your RG dude but massive props for getting on with it yourself! It does take some serious guts to dive headfirst into this, especially if you’re reluctant to do it and it’s not a guitar you can risk messing up so the risk absolutely paid off from what you said. Cheers for watching and the comment mate, as always I really appreciate it! 🤘
@@JackTaylorGuitars Oh, it was quite the undertaking as it was my first mod, but it was fun one nonetheless. The sounds turned out to be what I was looking for, which made the effort all the more worth it. 😄
Nice Video Is it just different feeling or hipshot bridge actually better? I have a Ibanez prestige with Gibraltar 2 bridge, I am considering an upgrade
Thanks dude I’m really glad you enjoyed it! The Gibraltar is a great bridge, I wouldn’t say it’s a needed swap, but the comfort, quality, and mass of the hipshot is a step above in my opinion. I’d definitely recommend it! 🤘
did you re use the output jack? or did you use the solderless one fro thew kit? i have an rgib6 and want to use the solderl,ess system but dont know if i fhould get a new output jack or use the one from the emg kit... help me:(
I did use the new output jack dude, but it meant drilling out the body to accommodate it. However, you can buy Ibanez style barrel jacks on eBay pretty cheaply. Search for EMG solderless barrel jack and you should find one. That would solve your wiring problems I think. Hope that helps! 🤘
Thanks for watching mate! I used waterslide printer paper off Amazon. Printed the logo on that and then just applied it as it said in the instructions and clear coated over the top 🤘
Black is great but also common as hell it's nice to have some verity it was an awesome job don't get me wrong I love black too but good to be open I'd say it looked cool to start but looks awesome I'm sticking with the bee on this one the transformer idea is killer
Yeah man me too! Black looks great on loads of guitars, I just thought this one could be a bit more my speed. I still really like your name suggestion dude 🤘
I’d love to get it for you mate but it’s ages since I found it. It’s nothing special, I just searched HH RG Pickguard on eBay. Thanks for watching dude 🤘
Damn, I'm a reverse headstock lover specifically Ibanez reverse headstock I wish this guitar was reverse headstock especially that clean fretboard with no inlays 😭
I can't remember where I got it from mate, unfortunately, but it shouldn't be too hard to find one. I found this just through googling RG HH scratch-late. Thanks for watching dude 🤘
Very true! But I was already in the cost of this guitar and I never intended to have the scratchplate originally. Also fancied the hardtail. But true, it ended up more RG550 than I originally intended 😂
how to take an elegant, mysterious-looking guitar, with an amazing white binding encompassing not only the body but the neck and headstock as well, and turn it into a ridiculous 80' wannabe banana.
Yeah, I've seen those man... At one point in my life I'd have liked them a lot, and I still do like the 7 string Xiphos, but overall they're just a bit underwhelming right? Thanks for checking out the video dude 🤘
So, instead of trading a mint Iron Lable for an RG350, RG450, or RG550, you completely ruin the entire thing. You got rid of the unique Ibanez exclusive bridge for the trendiest hardtail in the industry. I now see why they're so hard to find and why they're so damn expensive when you do find them.
They’re £300-£400 dude and there’s plenty of them so I wouldn’t worry if you want one. And besides, the Gibraltar bridge is super common and not that good. Either way I had fun modding my guitar, thanks for checking out the video 🤘
C'mon man black guitars aren't boring, there is a reason plain black are the most purchased by metal players! (sometimes they just cost more than the other colors in the same model)😂Pretty bold of you to give it such a makeover, turned out nice!
Thanks dude, I’m glad you like it! Don’t get me wrong, I’m not saying I think all black guitars are boring, far from it. I love black guitars that have a little bit of something to them. This one just didn’t do it for me 😂 Now it’s much more my taste!
This looks like the genesis modell without the annoying middle pickup and the floyd rose. It turned out pretty sick!
Thanks so much man! Yeah, it ended up being more like the RG550 than I'd have liked but I am stoked on it. Appreciate you watching dude!
i have the 550 the bridge is amazing for anything coz its an ibanez edge not floyd rose but yea the middle pick up is a take it or leave it
youre becoming one of my favorite guitar channels dude, amazing production quality and engaging content.
That’s one of the nicest things anyone’s ever said to me mate. Thank you, sincerely. It means more than you know 🤘
Dude, this is so sick. Great job all around!🤘😎
Thanks so much mate, I stoked you like it. Cheers for checking it out dude 🤘
Man your channel deserves a looooot of following, the quality is just top notch, and you are a quite good entertainer, the fastest 11 minute of my life dude💪🏻💕
Mate, it’s comments like this that keep me going, I appreciate it massively. Thank you 🙏 Working on the entertainer part ‘cause I struggle being in front of the camera, so that means a lot that you enjoy the videos 🤘
That’s sick. One of the most genuine tubers amount.
Thank you my dude, I'm glad you liked it! 🤘
you just made an already sharp Ibanez even sharper! awesome job mate. Subbed!
Thank you my dude, I'm really glad you liked it and I'm stoked to have you around 🤘
Now it is an Ibanez RG551XL-DY, based on the company's naming system. Great job!!
That's so cool! I'd never thought to see how it'd be named 😁 Thanks man, that's a really cool comment and what I'm gonna tell folks it is now haha Appreciate you watching 🤘
Fair play repainting a perfectly fine Ibanez. On camera it does look better in Yellow with the black pickguard, you don't notice any of the imperfections you mentioned. Loving the content and production quality. Looking forward to more videos this year :)
Thanks Livesey, it means a lot to me that you check out my stuff and enjoy it!
I’m really chuffed with how it turned out. In the flesh it looks great from a couple of feet away but any closer than that and you start to notice the problems but it’s become one of my favourite guitars. I just vibe with it a bit more now if that makes any sense at all 😂 Thanks again mate, appreciate you dude! 🤘
Yes! New video, looking forward to this one. Love your previous mod video 🤘💥
Thank you mate! I hope you enjoy it. I had tons of fun putting this one together 🤘
About that crack, I had a similar situation with a respray that I did on my old Ibanez Roadstar ll bass.
That bass had been modded from the original “Musicman-style” pickup load-out to a “Precision-jazz” load-out and then back to the original set up but with an EMG!
The initial mod used a block to fill the hole and was then resprayed with a Rolls Royce paint (metallic - iron grey) that was kicking around a mate’s paint shop.
During the respray, the block moved due to a reaction between the glue (used to set the block) and the paint. It stopped moving but the block stood proud. It was such a gorgeous colour that I decided to live with it. The rest is history & it is now white and fretless! It still retains that large EMG soapbar with a stainless steel p’guard to cover up all ‘deformities’!
Does the crack follow the line of the neck? If it does, it might be the joint between the pieces of wood used to construct the body??🤨
So Jack, have you ever considered fretless guitar?
Ah interesting! That sounds like a killer bass mate!
The crack comes out diagonally from the switch route. The only explanation I can think of is possible shrinkage of the paint or something like that. I dunno, but I can definitely live with it too now it’s stopped growing 😂
I have never touched a fretless guitar! I’d like to try one but I definitely feel like their reserved for people more talented than myself haha
Thanks for watching mate 🤘
When I said along the line of the neck, I meant parallel to the line of the neck.
I have modified most of my basses in some way or other. I have done a few guitars too and successfully created a couple of parts-casters, but sadly I am not a competent guitar player due to lack of radial twist in my lower left arm.
Dude, I enjoy your playing and your apparent honesty. It’s quite refreshing! Your streams are definitely going down the right route and have a very professional feel of a seasoned streamer - keep it up!
As for your ability as a “personalising” modder, check out a fellow You Tuber, Tim Woodford of Woodford Instruments, he is the real deal as far as a superb & honest luthier can be. You get the impression that there isn’t anything he can’t fix or repair!
Love & peace, Bruv!
Ah I see! No it doesn’t seem to be. It’s a fairly long and curved crack/split that doesn’t seem to follow any real rhyme or reason.
That’s cool man, modding your instruments is such a great thing. Putting your own stamp on something is always super satisfying.
And I really do appreciate the kind words, it truly means a ton to me. I’m still working all this stuff out so it makes me really happy knowing I’m doing something right, thank you.
I recognise the channel name, I’ll have to have a bit of a dive in later. Thanks for the suggestion!
Cheers bro, you’ve put a smile on my face 🤘
I’ve recently got one of these sounds amazing but definitely gonna upgrade some parts on it such as the hipshot tail piece and hipshot locking tuners and maybe a new nut
Congrats! They're sick guitars dude! Couple of little tweaks and you can really make them amazing. Enjoy it and thanks for watching mate 🤘
looks sic man, just found your channel, but sub’d and really like your content! keep up the good work Jack!
That's awesome of you mate, thanks so much for the words of encouragement! Happy to have you around! 🤘
finds gloss black boring, proceeds to slap the most mid yellow
😂 It’s almost as if my preference was yellow over gloss black! Thanks for watching dude 🤘
I wish if I could se every step built and what brand paint you used and how you did it
Thanks mate, I appreciate the feedback. It really helps! I’ll consider that when I’m working on the next one 🙏 I use Montana gold graffiti paint and varnish. They’re a nitro blend and really hard wearing. Basically, I just sprayed it on 😂 No special tricks, just me in the garage spraying a guitar!
Thanks 🙏
How am i just finding out about you bruh, such a fun video and mods, you seemlikesuch a cool dude too W all around
That’s super cool of you to say dude, thank you! It means a lot man 🤘
Great job! How did you get the fretboard so dark, it looks like ebony?
Cheers dude! I think it’s a combination of it being almost a 10 year old board and a lot of hydrator 😂 Appreciate you watching man 🤘
Ultimately, you made it your own! It rules!
That's super cool of you to say, thanks for checking it out! 🤘
Hey am I was wondering how did you paint the headstock with a iron label?
I basically did exactly the same thing as I did for the body dude, sanded and sprayed with Montana Gold paint. From their, I clear coated it, printed a waterslide decal of the logo and sprayed over that when it was added. Hope that helps mate and thanks for checking out the video! 🤘
i have the same exact guitar, wonderful instrument! altho either my eyes are playing tricks on me, or my binding is not as white as it should be. 0 smokers in the house too. wonder if im just losing my mind
They really are great guitars! Just a personal taste thing and my constant need to customise stuff that drove me to this 😂 If you’re talking about the neck binding, mine was slightly off white too and I believe it’s because of the finish on the neck. Either it aged slightly or wasn’t totally clear in the first place but sanding through it brought my binding back a bit whiter. Cheers for watching 🤘
came out neat man
Thank you my dude, I'm really glad you liked it! Appreciate you checking out the video 🤘
Doood you’ve absolutely got the chops to play in the Jared Dines shred collab 😮 if that was improv can’t wait to hear what you can do with a plan for the solo 🤘
Mate, I massively appreciate the vote of confidence. Thank you. Being totally honest, I'm not confident enough in my playing to be a part of that yet. Maybe I'll throw my hat in the ring next year 😅
@@JackTaylorGuitars you and me both my dude 😅😬
Edit: I mean I’m not confident enough in my own abilities either but I’m hoping I’ll be able to take a shot next year 😬 realised that was kinda vague
I got you bro don’t worry! 👊
Reminds me of the Transformer Bumblebee. I was wondering how you preserved the Ibanez logo on the headstock? Would you please reveal that to me? I am considering doing something similar to an Ibanez someday.
I had to make a brand new logo dude! I used printable waterslide paper and applied that as a transfer, then clear coated over the top to protect it. Thanks for checking out the video mate 🤘
@@JackTaylorGuitars Thanks for the reply. I didn't even realize that was possible. I saw another video where a guy had redone an Ibanez and he ordered a logo for it from Ibanez.
I didn’t know you could do that 😂 That might have been much easier, though I guess it’s not very hard to do the transfer thing really either. Hope you have some success when you do yours mate!
@@JackTaylorGuitars , thanks Jack. I was considering trying to perhaps find the neck I want and then see if I can't find a body i really like, from a less expensive guitar, where the finish is really nice, then put the hardware on it I want, then finish setting it up the way I want. I just bought an Ibanez GRG and if it suits my playing well enough, I may just do a few minor things to it and call it a day. On the other hand, I do enjoy luthier work and will need something to do when I am retired. Perhaps I can do custom setups. Thanks again for the reply.
Sounds like a great project mate and doing setups or a bit of tech work would be a nice way to spend your time I reckon! No worries at all, thank you for watching and commenting dude! 🤘
where did you get the headstock logo?
I printed it dude, it’s super easy! Got a PNG image of it, resized it, and printed it on clear waterslide paper from Amazon 🤘
Where did you get the pickguard? Was it made specifically for this model? I'm looking to mod my RG421MSP in a similar way and am looking at a RG350 pickguard for it.
Hey mate! It wasn't, it was just a cheap Ebay purchase. I searched Ibanez RG HH scratchplate and found one that looked like it would fit. Thanks for watching dude! 🤘
He turned a standard guitar to a high end killer looker awesome if it can be improved then job good
Mate thanks so much for checking it out! I really appreciate it dude 🤘
ruclips.net/user/shortsMrKtnjJZWKg?feature=share
ruclips.net/user/shortsMrKtnjJZWKg?feature=share
Nice work, mate! That thing's a beaut now! That thing turned out looking almost like the Bright Yellow version of the guitar I have, the RG331M, apart from the fretboard that is.
Ibanez should make more fixed bridge RG with scratch plate/pickguard more often, for ease of modification. I appreciated the fact that 99 percent of the soldering I did on my RG, when I was installing the P-Rails, were outside of the guitar.
And that was a brave (or rather foolish) thing I did, because it cost me all of my savings at the time, meaning I could not get a tech to do it for me. The pickup set was a deal that I would never get again if I screwed it up (it would have cost twice of what I paid, if I had to import from the US or Thomann), and I haven't soldered for ages at the time (nor was I proficient at soldering either), so I took a risk, and I'm glad that it turned out well. I had no choice, due to the stock pickup had died and it was (and still is my only) "playable" guitar.
I'm glad that you didn't have do extra drilling on the body, or on the bridge plate, or having to do repositioning work for the new bridge. My guitar has the Gibraltar Standard I (the bulkier version), yours a Standard II, which I believe, the Hipshot Ibby bridge being a drop in replacement. Sadly that wasn't the case for me, and due to that slight complication, the Standard II bridge I bought last year, is not in use atm and I've decided to just keep the bridge stock for now.
Thank you dude, that’s really kind of you to say! I’m glad you like it 🙏
Absolutely agree, more fixed bridges with a scratchplate would be really good to see.
Sounds like you had quite the job on with your RG dude but massive props for getting on with it yourself! It does take some serious guts to dive headfirst into this, especially if you’re reluctant to do it and it’s not a guitar you can risk messing up so the risk absolutely paid off from what you said.
Cheers for watching and the comment mate, as always I really appreciate it! 🤘
@@JackTaylorGuitars Oh, it was quite the undertaking as it was my first mod, but it was fun one nonetheless. The sounds turned out to be what I was looking for, which made the effort all the more worth it. 😄
Nice Video
Is it just different feeling or hipshot bridge actually better?
I have a Ibanez prestige with Gibraltar 2 bridge, I am considering an upgrade
Thanks dude I’m really glad you enjoyed it! The Gibraltar is a great bridge, I wouldn’t say it’s a needed swap, but the comfort, quality, and mass of the hipshot is a step above in my opinion. I’d definitely recommend it! 🤘
@@JackTaylorGuitars thanks for the reply, I think I will replace it when my Gibraltar bridge get rusty
That sounds like a good plan dude!
did you re use the output jack? or did you use the solderless one fro thew kit? i have an rgib6 and want to use the solderl,ess system but dont know if i fhould get a new output jack or use the one from the emg kit... help me:(
I did use the new output jack dude, but it meant drilling out the body to accommodate it. However, you can buy Ibanez style barrel jacks on eBay pretty cheaply. Search for EMG solderless barrel jack and you should find one. That would solve your wiring problems I think. Hope that helps! 🤘
@@JackTaylorGuitars alright im going to order one from ebay. Thanks!
No worries at all!
Hi where u got the Ibanez decal?
Hey dude, thanks for watching! I printed it myself using some waterslide decal paper I got from Amazon 🤘
@@JackTaylorGuitars Thanks! Caribbean viewer here.
Amazing! I’m super jealous dude, what a beautiful place!
How did you do the logo on the headstock?
Thanks for watching mate! I used waterslide printer paper off Amazon. Printed the logo on that and then just applied it as it said in the instructions and clear coated over the top 🤘
@@JackTaylorGuitars Awesome thanks. I have an old RG120 (Guitar Center special) that I'm modding and am planning on using a very similar yellow.
@@kanuuker That’s awesome man, I hope it goes well! 🙌
I have same guitar, i think i will buy chrome covers for pickups (i changed emgs on her)
Oooh yeah, chrome pickups on the Iron Label would look gorgeous! Thanks for watching mate 🤘
Brooo....what is the size distance between pick ups
It's standard RG distance my dude, I don't know what that is off the top of my head though, sorry man! Thanks for watching 🤘
ok, standard size friends, I think you make the guitar yourself, thank you, friend, greetings from Indonesia
Black is great but also common as hell it's nice to have some verity it was an awesome job don't get me wrong I love black too but good to be open I'd say it looked cool to start but looks awesome I'm sticking with the bee on this one the transformer idea is killer
Yeah man me too! Black looks great on loads of guitars, I just thought this one could be a bit more my speed. I still really like your name suggestion dude 🤘
@@JackTaylorGuitars ruclips.net/video/0IJX9eyeP6Q/видео.html. This is full jam to that short
love it
Cheers mate! I appreciate that 🤘
Link for the pickguard
I’d love to get it for you mate but it’s ages since I found it. It’s nothing special, I just searched HH RG Pickguard on eBay. Thanks for watching dude 🤘
I think you misunderstood the concept of beauty in plainess.
That’s a very deep and philosophical thought dude. Moving in fact. I’ll go and think deeply on this. Appreciate you watching 🤘
Damn, I'm a reverse headstock lover specifically Ibanez reverse headstock I wish this guitar was reverse headstock especially that clean fretboard with no inlays 😭
I know right! The Ibanez reverse headstock looks so good too, I'd have loved if this guitar had it. Thanks for checking out the video man 🤘
You put your picks in there genius!!!!!😂 that's actually a good idea for us that loose 10 picks a week
You'd never be without one dude! 🤣 Thanks for watching mate 🤘
I'm glad that we can agree, Tone is stored in the balls
The only place it could be dude! Thanks for checking out the video mate 🤘
Name it Yellow Jack-et and add a hornet/yellow jacket decal on the back of the headstock.
That’s such a good idea dude, thank you! Cheers for watching mate 🤘
link pickguard bro, i have ibanez grg 170,
I can't remember where I got it from mate, unfortunately, but it shouldn't be too hard to find one. I found this just through googling RG HH scratch-late. Thanks for watching dude 🤘
@@JackTaylorGuitars oh, ok sir, 😁
Just give paint time to dry sand out imperfections, then rescuff surface and respray next time lol
Thanks mate! I think my biggest issue is impatience 😂 Appreciate you checking out the video dude 🤘
...you could have just bought an Ibanez RG550 desert yellow and save yourself all that trouble.
Very true! But I was already in the cost of this guitar and I never intended to have the scratchplate originally. Also fancied the hardtail. But true, it ended up more RG550 than I originally intended 😂
how to take an elegant, mysterious-looking guitar, with an amazing white binding encompassing not only the body but the neck and headstock as well, and turn it into a ridiculous 80' wannabe banana.
Good job it's my guitar and not yours then mate, eh? Thanks for watching 🤘
They clearly havent learned because the new iron label guitars are just satin black i like satin but black? No other colours?
Yeah, I've seen those man... At one point in my life I'd have liked them a lot, and I still do like the 7 string Xiphos, but overall they're just a bit underwhelming right? Thanks for checking out the video dude 🤘
oh, if you’ve not named it yet: yellow belly
I actually haven't, I totally forgot 😅 I'll add that to the list! Thanks again mate 🤘
Call it bumble bee
Mate, that’s a really good suggestion! I like it a lot! Appreciate you watching and commenting dude, thank you 🤘
Call it “reborn”
Awesome suggestion Rene, thank you 🤘
you have to intonate it properly in the solo I noticed intonation issues.
Thanks mate I’ll get right on that 👍
Was most normal Ibanez, + good rg6ucs , other boring
Sorry bro, I don’t quite understand. Thank you for watching though, I appreciate it 🤘
So, instead of trading a mint Iron Lable for an RG350, RG450, or RG550, you completely ruin the entire thing. You got rid of the unique Ibanez exclusive bridge for the trendiest hardtail in the industry. I now see why they're so hard to find and why they're so damn expensive when you do find them.
They’re £300-£400 dude and there’s plenty of them so I wouldn’t worry if you want one. And besides, the Gibraltar bridge is super common and not that good. Either way I had fun modding my guitar, thanks for checking out the video 🤘
@@JackTaylorGuitarslol someone pissed in his cornflakes.