Puma Wildcat pps part 2 legacy sports
HTML-код
- Опубликовано: 19 окт 2024
- I took it completely down to the last spring and pin. Cleaned all the factory grease and cleaned with some good remoil. It fed all 50 of the federal bulk ammo from china mart. Yahoo. Let the good times roll !!!
I am an amazon affiliate , Shopping through my link doesn't cost you a thing, but I get a small fee when you do. Thanks! amzn.to/2VKQjIV
@Scooter768 the rifle is reliable. i am still experiencing an occasional jam but with a high cap drum mag,a jam every now and then is acceptable in my opinion.they say the 30 round stick mags are flawless in feeding but as i said the occasional jam is infrequent enough that its worth it to get the drum mag. the gun is a blast to shoot and more accurate than i expected it to be. have fun!!!
I have the same exact gun and have the same exact problem, I am glad you found a solution! I am just going to hope that mine will come out clean again. She is being pretty stubborn.
@darkgt03 I can only speak from my experience with this gun. It's turned out to be very reliable and it's accuracy has actually surprised me. It's beenma blast but I would recommend a thorough and complete stripping and removing all factory grease before firing.
@feedmewaffels no worrys about lead contamination. i got some sand bags around my well that i got from the mercury factory after they left town and went to china to open a new factory. i think they branched out into making toys as well.
@skoal22005 Yeah I'm kinda surprised my self. I think in this case it was a combination of a brand new gun and crappy factory grease on everything. When I cleaned it all up I had a feeling that would make a difference.
In the owners manual it recommends using ammo that reaches muzzle velocity of 1300+ fps, jams or ff/fe may happen without it. My drum mag also works better when i use ammo in which the bullets don't have the checkering/belt around it. Cleaning all the factory grease out of the mechanism and then oiling it might help too as suggested here. From what i've read it seems that these guns also work better after you shoot 200-250 rnds thru them first to break it in.
@qafmbr Thanks. No worries,I have no neighbors back behind my shop. I own all that property and it's posted.
@TOMMYSURIA it only cost a little more than my colt ar 15/22 but it is twice the gun. much easier to do a full cleanup as well. nice caps by the way.
@calitrucker1 Not only did I decide to keep it,I called blackdog and ordered another. Man I love .22,s. You can shoot all day for a couple bucks.
@TheHalo1917 wutcha callit. thingamabob,doohickey,it was a lot stuff to take out just to clean it. i wont do that to often.
@bctruck When i tore mine down i found that the spring for the extractor was exposed in the bolt. Thats where u could be getting the metal flakes. Not to mention the carbon thats going to build up on and in the extractor spring
It just needed cleaning. Those two failure to feeds that you got after cleaning were due to the ammo most likely. It didnt like the feed profile of those. Sometimes you can keep shooting something that it doesnt like at first, then thats new profile can sometimes polish a place on the feed ramp and a few other spots and it will start working. Its like breaking in to a new shaped round.
im having the exact same problem with mine with the 30 stick mag. the 10 feeds flawlessly. i didnt strip it before firing. i jam every 3 or 4 rounds. accuracy is better than the m&p .22
@coltt218 ive shot several hundred rounds thru it now and seldom have any trouble. its more accurate than my colt (umarex) ar-15/22. its also a hell of alot easier to clean.
looks like its working good. did you decide to keep the drum?
@gardee37rn i clean it every couple thousand rounds. its gotten easier to do now.
Yes you can.
I have the same rifle and same issues. I have a bore snake for cleaning but can't keep it open. Any ideas? No where online seems to know
Good video, nice job. You aren't that fat! Hey, I hope your neighbors aren't getting 22's raining down on them after they hit the ground and fly up!
Can you take that front foregrip off?
no no no its this duda goes there this duda goes here u got it wrong lol jk
OVERPRICED AND FULL OF NASTY GREASE, NOT A GOOD COMBINATION. SIG-522 CHEAPER AND ULTRA RELIABLE.