Installing c6 Ceramic Hydro Lite - Step by Step Tutorial!
HTML-код
- Опубликовано: 10 май 2024
- In this step-by-step tutorial, learn how to install C6 ceramic Hydro Lite on your vehicle. Follow along as we guide you through the process of applying this advanced ceramic coating to achieve long-lasting protection and a brilliant shine. Don't miss out on this essential guide for keeping your car looking its best!
Products used in this video 🇺🇸 For people in USA:
Rinseless10 save some coin on DIY DETAIL PRODUCTS & c6 Hydrolite
Hydrolite - bit.ly/3UVghZM
APP polish - bit.ly/4bvrVQA
Red Buffing pad - bit.ly/4agxlOp
Incredible suds - bit.ly/4byC3I6
All Clean - bit.ly/4aiYBM9
Iron Remover - bit.ly/4bilnoH
Tire Dressing - bit.ly/4aiYz6Z
Buffing towel - bit.ly/4bfFG6c
Pearl towels - amzn.to/4bC2bCd
Flex beast polisher - amzn.to/3yngCLS
🇦🇺 For people in Australia:
carcareco.com.au?ref=4770
DIY Rinseless wash - carcareco.com.au/product/diy-...
Diy Incredible suds - carcareco.com.au/product/diy-...
DIY All clean - carcareco.com.au/product/diy-...
P&S Rehab- carcareco.com.au/product/ps-r...
c6 APP polish - carcareco.com.au/product/c6-c...
Equipment I use
- Kranzle Pressure washer - amzn.to/3tJmBsB
- Blueshield Pressure washer hose 50 t - amzn.to/3NTM3me
- MTM HOSE - bit.ly/3voGfe2
- MTM Hydro sgs28 swivel stubby - amzn.to/3vnzTLH
- MJJC foam cannon v3 - amzn.to/3TS5TBY
- 5 gallon clear bucket - amzn.to/3H8lvcO
- Grit guard - amzn.to/48J9DKb
- Detail factory tire brush - amzn.to/3RXfbdw
- Flag tipped brush green - amzn.to/48qfnZt
- EZ Detail brush big - amzn.to/3Sd5RDG
- Shinemate 21mm polisher - amzn.to/41OBXbL
- Flex Rotary - amzn.to/3U9lJbJ
- Lake country blue foam Favorite 1 step pad l - amzn.to/41NzFKa
- Lake Country hybrid Rotary cutting pad - amzn.to/3RSyogk
- Lake country pad washer - amzn.to/3NYpLQ3
- Poka Premium polisher holder - amzn.to/3vAXMzq
- Poka Premium detailing cart - amzn.to/3NVkbOi
- IK Foamer - amzn.to/3Sa9RET
- IK sprayer - amzn.to/3tIsg2a
- IK electric foamer - bit.ly/47r1Srd
- IK foam pro 12 6 liter - amzn.to/3H9xeYJ
- IK mini 360 12 pack - amzn.to/3S8DtlX
- IK Multi 32oz sprayer - amzn.to/47mONz7
Gear I use to film
B cam DJI osmo pocket 3 : amzn.to/3SZ1meQ
A Cam Sony a7siii : amzn.to/42Z1csx
35mm sony 1.4 lens : amzn.to/49wM7ku
MIC Sennheisor Pro audio - amzn.to/3TjJIUM
DISCLAIMER: This video and description contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission on a purchase without additional cost to you. If you do purchase through my affiliate links, thank you so much for your support!
#yvanlacroix #c6ceramics #diydetail #Diy #newcoatng #ceramiccoating #howto Развлечения
This content is like my adult version of "Saturday morning cartoons". Thank you for filling that void my guy! Slaying the content bro, keep up the great work, and keep up the diet! No pain, no gain 💪
Thanks bro much love ❤️
Geo metro!!! My grandmother(RIP) had one when I was growing up and it could barely hit 60 on the freeway. It became known as the Jetro Metro! I appreciate you brother and thank you for the trip down memory lane with that comment.
Shout out to your granddad sounds like an amazing person thanks for watching bro
Hardest worker in the room! Did work Son!
Thanks bro!!
Bro, I did my first ever polish and ceramic coating on my car over the weekend. It was a 15 hour marathon and the most mentally and physically exhausting thing I’ve ever done. Shout out to you for doing this professionally. I don’t think I have it in me to do this again lol
Also, keep killing it on the diet bro. It’s hard. I did a “dirty keto” a few years back and dropped 50lb in a few months. The first 2 weeks you will feel like absolute cheeks. Once that passes it’s just about maintaining discipline and sticking to the diet. When you do come off, taper. Do not go balls to the wall again eating. You got this.
Hahah bro it becomes habit , you will find what works for you and it will get easier and easier bro day by day
Some coatings are easier then others , others are harder and cause difficulties
But Dey by day
Man.... I'm about to drive my wife's new SUV to you to coat it! I'm in Maryland, but you are THAT GOOD!
I’ll do it for free and I’ll pay for the bottle haha 😆
I’m in Maryland and am a certified pro installer of C6 coatings. Eddie can vouch for my work
I have been doing Carnivore for 3 months. Down 50 pounds and tons of focus and energy. Wish you well in your Journey
1 month in feeling awesome!!
Great demo on it big bro!!!👍🏻👍🏻💪🏼💪🏼
Thanks for for watching
Great video Eddie👏🏾👏🏾
Thank you 🙏
Amazing Eddie! Can’t wait to try it! 🔥🔥🔥🔥🔥🔥
Thank you sir
Great video man, it looked so good at the end 😮🎉🔥
Thanks Nick appreciate you
I just found your channel. Man i enjoy your content. Thanks bro.
Nateeeee appreciate you bro thank you for watching and subbing
Great job, informative and entertaining as always. Enjoy watching your content. Thank you!
Thank you so much
Great video Eddie! That Carne is amazing!
Thanks appreciate you letting me test it and demo it , turned out goood
This was another banger Eddie appreciate your content and bringing us along for the journey. Car came out beautiful hope you and everyone have a great weekend.
Thanks , it was a joy to use and the coating was so pleasant
Wow that’s the deep rich color with a nice glow that I like.
I was really taken back with jt was crazy
Orgulloso de ti, taking care of you health. Keep it up papi. That gloss looks amazing 💪🏼💪🏼
Thanks bro day six no looking back
Love the vlogs! And the honesty with the diet - it does suck right now but worth it!! At least, that's what i keep telling myself too lol
Deb your amazing congrats winning!! I’ll ship that out Monday
Ola from Portugal, very njce result😊and i love your spirit /energy...vamossss💪
Thank you so much and hope you’re safe!!!
I love you dude! You earned a sub from me today. What a video. Amazing! The detailing community is one that I’m extremely proud to be apart of.
Bro means a lot thank you for subbing, for being involved
Wow!! That red on the hood absolutely popped!!! Beautiful!!! Fantastic job!!! 😊 you’re work is amazing!!
Happy Mother’s Day I hope your get spoiled and have a great day
Phenomenal tutorial! Step by step. Nice results! I’m sure the customer was blown away with the results!
Thanks Tim for watching appreciate you
Great job as always. Thanks for explaining the APP application and what works best with it. Good job with sticking with the diet.💪
Thanks bro I appreciate you so much! I hope your healthy bro
Great job, Eddie! Always keeping it real, thank you for sharing your life experience as well as your experience with C6 Hydro Lite. Lastly, shout out to your wife for being the ultimate judge, "soft glow." I agree. You're getting very close to a carnuba look, which I still think has the best look (not talking longevity or protection)
Thanks jay appreciate you for watching and supporting
Damn. You know this was a bid deal when the boss makes an appearance in the video. Enjoyed all of this and makes me wanna try C6 even more. Looking good with the caveman meal plan too
Gary thank you for the comment , Bev was like wow that glow next day it was crazy
Eddie that Pocatello coffee hits different 💪
Hydro Lite looks fantastic!!!
Thanks
Jamie sent me the chiroy blend
Dude KEEP WITH THE CARNIVORE! I lost well over a hundred pounds and have kept it off and I feel so much better than I ever have in my life. 5 years on now, all bloodwork is spectacular too.
God willing imma keep doing it , fighting the feelings of up and down and making sure I’m only eating when I get hungry and stop when I’m full
@@Ecdetailsit took me a good 6 weeks to really get in the swing of it, but since then it’s just been habit. Health is wealth friend 👍🏻👍🏻
@@Ecdetails Once you get past the Blood Glucose Spikes and become Fat Adapted, it will get much better. Be sure to add Magnesium and an Electrolyte to your regimen.
@@jperez7499 I did man been helping feeling sooooo good and had to get soem fiber cause the lower region was gnarly
Looks like a nice coating. Gonna have to wait and see how it holds up. Not sure it’s worth the 3x cost of other coatings for a potential marginal gain. Keep up the good work on the carnivore!
Ya I get that! If you can get to cars out of it then it would be, but it’s up to you and your preference
@@Ecdetails true. I support their small businesses, it will just be down to preference if the want to spend $350 just for the coating materials. Looks like a solid product. It’s all a balance. Everyone wants the best for the lowest price. Doesn’t always work that way
Looks awesome.
Kerrygold… YES!!
Alll day!!
That’s one NICE Camaro. ❤❤❤❤❤
Ya it turned out great customer is gonna be thrilled
First Eddie. May have been 5 days, but I can see in your face it's slimming. Great tutorial! My first car at 16 was a Geo Metro 😆 My insurance was quadruple my car payment.
Haha , my wife said the same thing we’re gonna keep it going man!!
I have not done a carnivore diet, but have done low carb. Keep up the good work. Yes, you do feel a little "flu" like and have headaches for a couple days, but then you start feeling great! Great podcast the other night, Taylor was hilarious. need more of him!
do french fries count as a vegetable
Taylor is amazing , he is coming back solo to talk about the grind to be a farmer and detail that is wild. Also appreciate the support!
@@MrKennyandersI don’t think so
Let’s goo!!! Now I think I need to buy a new car so I can test this out myself!
Haha 😆
I think Beverly has a soft glow.❤ Amazing results on the car Eddie but it is probably out of my price range. Enjoyed the video.
Thanks man I appreciate you , Bev is getting better and better every day
Dude. I'm hungry now, damn food looks amazing 😆gotta get the snacks to watch the video 😆
Yes
Haha It was soo good
Heck yeah brotha
Yeah I’m gonna want this 😂💯🔥👊🏼
It’s pretty good
Great vid! By the way I did my first ceramic (cerakote) coating job on a 2024 Toyota Tundra Capstone and it came out amazing. I will be posting my first vids soon hope to get some feedback when ever you get the time. Stay blessed
With the new version of Cerakote ? And ya man can’t wait to see
Someone real butthurt bout the turtles 🐢 maybe chemical bros can send over their new hydro butt paste 🎉
Haha love you like you love jumbo
@@Ecdetails man makes a great snot rag I will admit jamie10
@@JamieTheCleaner lmao 😂
You too are way too much! 🤣🤣
Broooo I died you 2 kill me I love it 🤣🤣🤣🤣 #fortheculture
Eddie hello from Cadillac MI. have you ever tried the Dr. Beasley’s NSP primers? Im not kidding when I say with using NSP before application my coatings last as long as the manufacturer says. Before I would just cut/polish with Megs then panel prep & it didn’t matter what coatings I used they would only last 2-3 years. With NSP the coatings are there!! Years and years after application!! I hope APP is just like it
Hey I have been using Dr Beasley nsp for while I got the new formulated 150 in the 32 oz bags and tubes of the other z1, 95 and 45
super cool box though! I want it! lol
The box was crazy how good it was
Mannnn I wanna try touchless so bad! Heard nothing but good things
Imma see what the hype is about haha
Another great real life with Eddie. Thanks for sharing ur life and this how to. It looks AMAZING! People won’t believe it’s not brand new.
Thank you Becca for watching I appreciate it
Eddie getting his food right, then going in with the Diet Hydro!
Lol
Haha i got your email beautiful I’ll send that today
Love the video, excited to see more reviews of this product especially if someone could show how it looks under water and also compare with some other products.
I presume this is a one coat product, is there any advantage in a second coat or instructions on that?
I have a stealth grey model 3 and really want something to bring out max gloss so hope this is the ticket and I don’t mind paying the premium if it’s good product and easy to apply.
I’m in Arizona where it is already heating up, is it safe to assume the time before wiping would be shorter in 100 degrees?
Lastly, as I live in a condo without outlets I have a cordless DA buffer, you made a comment that it was a pain for the APP, curious what you meant and how to make it work
I am a weekend warrior but have coated a few motorcycles with Gyeon Synchro EVO and Adams (not crazy about the latter but Gyeon is my second choice if I don’t use the DIY stuff)
Hey thanks for the comment I’ll try to answer it all in order
1. Work times are dependent on heat humidity so shorter work times should
He no problem
W
2. It’s a one layer product no need for two it will better then Gyeon, I use apply those coatings
3. You can use a higher throw for the app polish just don’t over work it
🔥🔥🔥
Great job keeping with the carnivore. You got this. I might be eating my words about spending 299 on a coating. Might be buying it to put on my rebuilt truck after its done being painted.
Thank you I will keep moving forward , so far so good first few days were rough haha but we’re doing good now
I just ordered the 5 year coating for my son’s car, it’s gonna be my first attempt at ceramic coating. I think I’m definitely gonna try out the c6 on my car though! Great video only question I have is the only machine I have right now is the Milwaukee da, what forced rotation polisher would you recommend?
Listen Jamie told me about this polished saw a few videos harbor freight has a Hercules force rotation that will do the trick
À forced rotation isn’t necessary, any DA with less than a 9mm stroke
That Hydro Lite looks like an easy to product to work with. The car turned out great. Also Carzilla would drop Touchless v2 literally a month after I bought v1 from them. Got a 5l jug that's going to take me forever to work through.
You might be better off with v1. Not all newer versions are better than the old ones. Only time will tell
Thank you.
Bro imma - go try it against v1 my truck is dirty dirty so I’ll
Do a vs to see which side does more cleaning
@@EcdetailsI don’t believe there’s any change to the cleaning power, just the concentration, less product required.
@@LSD04 Imma test it and check v1 I with my PIR I needed half my foam cannon to make it work
I wonder if you could use a etching tool to make the card that much more premium
dont know but the card is sweat
Hey Eddie, can you recommend a coating that can be used on new non faded outer trim to keep it protected?
Ya Feynlab plastic coating , vonnix , Gyeon trim , gtechniq are the ones I’ve used that hold up
could it be applied on the glass,wheels,trim? also any tips if it could be applied outside in summer Florida baking sun?
Hydrolite yes you can
Heck yeah EC keep killin it on the carnivore diet! Can’t wait to get hydro lite on my car! No one talks about diy tire dressing, I love it. Been using it for about a year and I threw away all my others 😂
Thank you
Tire dressing is really good I’ve used a few bottle in the last couple of years
This is the second time I see an unboxing and that metal card is in there.I didn't receive one with mine and only received one small sticker
Unfortunately our warehouse staff made an error with the batch we sent to our testers. The card is not supposed to be included with C6 Ceramics Hydro Lite
Eddie can you ask for a deep dive on APP from Yvan. I’d like to know a few things more about it. For instance I like using Dr Beasley’s NSP polishes because it has nanotechnology in the formula which as you know helps with bonding. Does APP have the same thing in it?
Man that’s hard To answer only the chemist would truly know what each abrasive package has , and how much actual abrasive vs ceramic but I’ll ask around
@@Ecdetails thanks Eddie. I’m hoping Yvan will do a breakdown of APP for you (us) so we can decide to use that product before any coating like NSP polishes. I’m just wondering what’s the difference between the nanotechnology in NSP & APP’s ceramic components
What makes this better than other coatings to justify cost?
Not sure yet for now it’s glossy like next level on a gray , easy on, easy off
Performance and chemistry
That’s very vague science and chemistry. I think diy makes good products but $300 for a coating is a lot. The market is flooded with all different types of coatings. Chemistry and performance means nothing for at least 2-3 years after testing to see where it’s at. I have had a coating from a company that claimed 3 years with a single coat. It’s now been on the car 5 years and still going strong. Not saying this coating is good or great but I can’t just apply it and after two months say it’s awesome. It takes years to say that.
hey bud, how comes it there are no reviwes on the Gyeon Eco Wash that was released? Cant find anything. I think you as the Rinseless Guru should try it and share thoughts. :D
I’ll work on a video - have a few others I have to get done
BUSSIN..
Thank you
Yes it is
Will going fast with APP cause holograms or trails? Esp on black paint? Fire tutorial btw!!
No did it again this morning as a test small throws don’t generally cause any of that, thanks for watching
@@Ecdetails Thank you, sir!!
No worries
What did you do to prep the matte vinyl for the coating since app has abrasives in it?
No decon and coated
Awesome video #bevapproved
Thank Mike!
Bro I know! Dry pad, dry towel.
I still want to try applying APP with my 15mm on slow speed (cause I want to use my bougie cordless) but I'll probably pick up that 12v SPTA cordless wax spreader since I only have a little baby compressor and I don't have a forced rotation.
Using a 15mm machine you will overwork the APP, you will not enjoy it.
@@C6ceramicsI know, I'm just stubborn and curious. I suppose I'll listen and not try it.
lol that’s why I called you out bro haha just follow the process
@@Ecdetails lol it's all good man! I count it as a good day if you call me out in a video.
BTW, I'm out finishing up doing an express detail on the wifey's ride. Doing the entire interior with ADS Pilot, wiping with a Hero dampened towel and then wiping dry. It's money! I can't believe how good Hero cleans out the microfibers. I thought you might be capping about that, but I was wrong.
@@jeffc6832 capppp I never cap 🧢 ask Nasiol
Now that’s a bitchin Camaro and Que the Judas Priest song breaking the law! Congratulations on the new diet as this diet has dramatically increased my health. I do eat veggies and fruit along with meat. We will have to chat one day about what works for me and what works for you.
I have installed Hydro on a handful of cars and the hydrophobic water behavior is off the chart. The self cleaning is also off the chart and makes maintenance washes super easy. Great video and I look forward to seeing the maintenance wash. I hope the family is doing well!
Thanks for watching , the customer is gonna be happy first in pocatello to have this coating on, just the experience overall was amazing
$362 with tax for the coating, pad and APP. I'm sure there was a ton of R&D and science that went into this but no chance it's twice as good as any other name brand coating for more than double the price. ADS, Geyon, Getechniq etc. All have 5+ year coatings. Wildly expensive for the prosumer and not realistic for the professional detailer. This price would eat into my margins substantially even with wholesale pricing. I know we chase the hype in the detailing world because that's what we love but the price is no bueno. Same thing as Kamikaze Zipang the difference in performance is negligible. Maybe if you measure the gloss with a gloss meter to prove it's glossier but I'm not convinced. Save your money people. Thanks for the review!
😂😂 damn bro the fact that you never tried it yet telling ppl to save their money tells me a lot bout your character smh
@@victormorales2876 Ouch bro, no need to attack my character because I used my professional opinion. Maybe ask yourself why my opinion makes you feel some type of way? I don't have to use it because of Eddie's review that's the benefit of RUclips reviews, we get to see others put products to the test and form an opinion. I've used countless brands as a professional and I can say as a fact you can get the same quality and performance for half the price and won't be able to tell the difference. Nothing in this video shows me anything different. Have a great day Victor and god bless.
Once you try it, you may change your mind. Price and value are different things. If C6 Ceramics Hydro Lite is out of your price range, DIY Detail coatings are great.
Interesting. It seems like you’re insinuating that a $362 coating package is out of my reach? The pricing is heavily inflated and the ROI isn't justifiable. 2.5x the price doesn't mean the product is better. However, you’re spot on about value and price.
The value doesn’t justify the price when your competition offers much similar results. Most modern coatings bead/sheet similarly, offer the similar protection and can last 5+ years with proper maintenance. The difference here is that yours is more than double the price of your competition. Professionals aren’t going to eat into their margins nor should they have to raise their prices and risk losing customers when this won’t add any more noticeable value or performance vs a different brand. I saw the beading and gloss on Pan’s channel. Really good stuff, no doubt it looks great!
I’d recommend doing more education for your consumers because there needs to be more justification given for the price. Or help educate your affiliates if they are doing reviews of your product. Tell us why it’s worth the money. Just my perspective 🙏. Best of luck.
@@-Joseph5I think you’re 🎯 the more time you spend doing this and trying products (Not a pro) you soon start to realise that there’s nothing really groundbreaking out there regardless of what the hype train says, lots of people using “game changer” lately but can’t answer you when asked why, eventually come to realise that you’ve got shelves and shelves full of very similar products 😂
Since I don’t have a garage would this work outside? I would try to work in a shade as much as I can? Also what other brands are outside friendly?
Ya work times are great , armour coating outside works , diy detail coating
Just work sections and watch flash times cause heat humidity to play apart
Yes C6 Ceramics Hydro Lite and DIY Detail coatings can be used outside
@@diydetailofficial with those ceramic coating if for some reason I wanted to remove it would I have wet sand them or a polish will work? I’ve head some ceramic coatings would need to be wet sanding to be removed
So how did you prep the matte decals on the hood if you’re not supposed to use APP on matte?
I clayed it and coated it
Understood. 👍
Can Hydro or other Ceramic Coatings be applied to a car w/ PPF?
Would you still do APP or just a Panel Prep?
Yes sir it can and I skip app just panel prep , note you can still do a polish on ppf but won’t “swell” like traditional clear
Wonder why a sander, a rotatry polisher not the same thing for the use of App?
note I used, a force rotation polisher and it worked great not sure why we cant use with rotary
ruclips.net/video/GBN9NEIur_E/видео.htmlsi=C8uzaRdpTZKkeMPS
Don’t use palm sander. Use DA and orange HDO pad with APP. You will thank me😃
🐬
Nuff said
My guy voice if an angel
Great job on the car brotha but to keep it 100% with shipping and tax thats about $400. Might be good for high end jobs but definitely will cut into your profits on an average detail job.
The bottle will do 2 cars on average. The time savings normally offsets the additional cost.
@@C6ceramics
Not knocking the product it looks amazing but for the price it's expensive for 95% of Detailers. Let's just say it does 2 cars on average, now I would have to have another bottle just incase it doesn't give for the 2nd car. Might have enough of the APP but that's still another $300 plus dollars I have to put out.
You're product will definitely sell at first but with that price range it will die quickly. Not wishing bad on your product its just 2 expensive.
For me reminds me of kenzo 15 mls 199 right this I have another half plus if you don’t go thick she’s doing 2 cars
Ordered after seeing this review. Didn’t get the metal card. Not a huge deal but still kinda lame they didn’t include it for $300
Ya they made a mistake was for pro only
Pro RUclips influencers that is LOL. Us regular stiffs got nada
@@MotoKDub Lol I wish bro it was for C6 hydro installer haha I thought well were getting it. The second box I brought didn't come with one
Is the APP wipe off a bit grabby or easy slick result?
Slick
Not grabby super easy wipe off just spread and wipe
@@diydetailofficial so you can go right after a compound of some sort with app and not have to do a nasty panel prep? Like say sonax cut Max, wipe off with rinseless dampend towel, app then buff off and ready to coat?
Is the diy detail tire dressing water based ?
Ya it’s good good
@Ecdetails dang I don't like water based dressing
@@Juicefree try it out , or use something Nero and dark side
*takes notes feverishly*
Eddie if you are cool with it I’d like to send you a little care package to help the diet. Least I can do for you hooking the community up so hard. I’ll email you about it.
I got your email bro much love thank you !
I have lots of DIY products. I love them all except the All Clean. Tire cleaner it is not. I always have to use something else.
Like the cleaning what you mean it doesn’t work like others ? What did you start using ?? Also appreciate you
@@Ecdetails all clean just doesn’t cut through like other wheel and tire cleaners. Maybe I need to go harder than the 15:1 dilution. IDK because I have seen Yvan and Nick say just use All Clean but it just doesn’t seem to be getting it like brake buster or Forst. Those are what I usually use.
12:54 what soft do you use?
soft what do you mean?
@@Ecdetails meaning software. there is some kind of menu called "New Inspection".
is it same thing what was sold but that man-duo at TRCMA?
Adding a comment in hopes of triggering the RUclips algorithm voodoo to propel Eddie to 50K in subscribers. 🙌
My guy appreciate you so much!!!
I would switch to at least lean meat to reduce the risk of raising your LDL levels.
Been mixing it bro been going alright
@@Ecdetails good stuff.
is this coating better than gtechniq CSL
Ya way better
@@Ecdetails reasons why? I would like a coating that is harder that will last longer
@@EcdetailsI am going to install the DIY detail 5 year Ceramic Coating on my brother in law car I hope it lasts a long time 😊
@@everettekupsche4038 Its pretty stout ive applied like 8 times
Dude got a metal C6 Squirtle card!
Frames it around neck
@@Ecdetails 😂😂
Thanks for not doing that guys diet with all the liver and bone marrow
Haha 😆
🐢
😆 I love turtles
Same price as a MacBook too 😂😂
Lord haha 😂😂😂😂😂🫠
Count 1 Mississippi and that will be one oz of product.
Haha 😆
#GeoMetroFam 😂
Haha 😆
Love to see that American flag outside your home! Many Americans don't do that anymore... 🇺🇸
America for life bro - we are blessed for all who fought for our freedoms and I never take it for granted
Even at 300 dollars it will not last 24 hours
what do you mean?
With the quantity we have in stock, I hope we don’t sell out.
Just gotta buy it before it sells
Haha having installed C6 Hydro, I wouldn't blame people if this sells out in 24 hrs. It's gonna be an amazing coating!
Eddie, fave tire brush for those low profile tires?
That Camaro came out freaking amazing
Thank you so much!
Yo, how come I didn’t get one of those C6 Pokémon cards for my customer? Just the stickers @c6ceramics
Gotta talk
To John, should of came with hydro and diamond gloss I think I got it by accident