OMG !!! LOL !!!My neighbor just removed the same transmission from his Nissan Titan. He had the exact same problems as you did ! I came away from this trani removal with a whole new vocabulary. Baaahhhhh !!!! Dam ... Good job ...well done !!
Thank you Scott. Your contributions have been super helpful! This will get me my parts to maintain my trans. Going to knock out filter and seals since its out.
Yeah definitely remove the cross member before the transmission bolts, that way you can lean the engine and transmission down and get much better access those hard to reach bolts
@@Rythecarguy I ended up hitting it with an air hammer while prying it...sucked but it came out. My bell housing bolts are abhorrently tight tho still fighting the top one, impact won't even touch em lol
I'm about to take on this task with my 2008 Titan 2wd, are there more videos on reinstall? I'm totally screwed and can't afford $6K for a rebuilt install, I may have found a used one that will work for $650, if it last me a month or two, I plan to try rebuilding the original. $1500 total is better than $6000 for a rebuild that I can't learn from. It sucks being broke!
I guess this took more than one day or week with all the hair cuts 😂. I love your videos Ry, it's true DIY as you learn on the job and make the nirmal mistakes. Have you considered a lift? Maybe contact some of those companies and have them sponsor or donate one, seen few RUclips creators get free ones. If no room, maybe consider the QuickJack,
haha yea, I grabbed video from all different days to make this video. There is stuff from like the course of 5 months. Also, thank you. I am glad you are still enjoying the content. I am making small changes as I go to try and streamline the process. It's funny, I tried to buy a quick jack and it didn't go well (long story, basically they lied about inventory and sat on my order for a month before I cancelled). I really do need a lift though. I am looking at buying some land out in the sticks and it would be really cool to rebuild my dream garage out there one day.
He's not a tech, he's learning as he goes. That what I believe makes his videos special. Techs make it easy and skip stuff, Ry makes it real for you and me in our garages
These videos have been extremely helpful. I need a bit more help though. I am trying to replace the vehicle speed sensor on my wife's 2005 Nissan Titan. Problem is I can't find it. I've replaced all 4 wheel speed sensors but I can't find the one that goes on the transmission to replace it. I am also about to change the transmission filter and transmission oil pan gasket. Could you post a pic or something showing where the VSS is?
HMMMMM the diffs are definitely on the list. I think on the front I am going to eventually take it apart and check the gears since the fluid was terrible (tons of metallic bits in there). The rear I am going to eventually regear but for now I will install an extended breather and swap the fluid.
Yea, you should. If not you will likely catch the trans on it when you are dropping it. Plus if you pull the intake and starter the two top trans bolts are crazy easy to get to.
That transmission support is pain when its firts time to drop down. 2nd And 3rd is like a breeze. Im gonna do this again cuz my I blew my tranny. This same as xterra trans, I noticed its much easier when you have bodylift lol..
I bet! I am going to do the same on the Titan as I did on the Xterra. I am going to sand away all the rust on the contact points and use chassis grease when I re-assemble. I hope there is not a next time but if there is it should be a lot easier.
OMG !!! LOL !!!My neighbor just removed the same transmission from his Nissan Titan. He had the exact same problems as you did ! I came away from this trani removal with a whole new vocabulary. Baaahhhhh !!!! Dam ... Good job ...well done !!
Oh man! I feel for him. I have to say dropping transmissions is one of my least favorite things to do.
Hope this helps any. Wish I was there helping out. Keep rockin man 🤘🤘
Thank you Scott. Your contributions have been super helpful! This will get me my parts to maintain my trans. Going to knock out filter and seals since its out.
Yeah definitely remove the cross member before the transmission bolts, that way you can lean the engine and transmission down and get much better access those hard to reach bolts
I mainly work on chevys but I'm doing a titan transmission on the ground right now..glad I'm not alone on the crossmember lmao
Omg
They are so damn annoying.
@@Rythecarguy I ended up hitting it with an air hammer while prying it...sucked but it came out. My bell housing bolts are abhorrently tight tho still fighting the top one, impact won't even touch em lol
@@robertgoodwin2787 did ya get it? 😂
Thanks i did the timing chain couldnt have done it with out these videos
Awesome!! 👏🏻 glad to help.
Thank you for the advice on the crossmember subscribed and liked 🎉
YW, thanks for the sub!
Wow that was savage taking that transmission out. Well friggin done!
Thank you! Excited to get it fixed and put back in.
Will a 2006 Nissan titan transmission 2 Wheel Dr. automatic interchange with a 2013 transmission 2 Wheel Dr.
I'm sorry but I can't say for certain. I do not know.
Excellent work and quality of Video. Impressive.
Thanks! ❤️
Damn Ry! What a job.
Right? This has been super annoying. I am running out of things to take off the truck.LOL
Hey man I have a 05 titan would happen to know what the SLIP light would mean? I found some info saying it’s a sensor but don’t for sure
I'm about to take on this task with my 2008 Titan 2wd, are there more videos on reinstall? I'm totally screwed and can't afford $6K for a rebuilt install, I may have found a used one that will work for $650, if it last me a month or two, I plan to try rebuilding the original. $1500 total is better than $6000 for a rebuild that I can't learn from. It sucks being broke!
I guess this took more than one day or week with all the hair cuts 😂. I love your videos Ry, it's true DIY as you learn on the job and make the nirmal mistakes. Have you considered a lift? Maybe contact some of those companies and have them sponsor or donate one, seen few RUclips creators get free ones. If no room, maybe consider the QuickJack,
haha yea, I grabbed video from all different days to make this video. There is stuff from like the course of 5 months. Also, thank you. I am glad you are still enjoying the content. I am making small changes as I go to try and streamline the process. It's funny, I tried to buy a quick jack and it didn't go well (long story, basically they lied about inventory and sat on my order for a month before I cancelled). I really do need a lift though. I am looking at buying some land out in the sticks and it would be really cool to rebuild my dream garage out there one day.
Being watching your videos on the Xterra. You a tech or you just gain experience doing it on your owe? U are pretty good
Just learned as I went. I have great manuals and technical acumen. The rest is just time. Thanks for watching man.
He's not a tech, he's learning as he goes. That what I believe makes his videos special. Techs make it easy and skip stuff, Ry makes it real for you and me in our garages
Thanks guy for the response!
@@ahmadghosheh3104 oh ok. Thx
Perfect opportunity to throw that 6-speed manual tranny in there!
I would LOVE that! But for me I just want to get this damn thing done lol.
These videos have been extremely helpful. I need a bit more help though. I am trying to replace the vehicle speed sensor on my wife's 2005 Nissan Titan. Problem is I can't find it. I've replaced all 4 wheel speed sensors but I can't find the one that goes on the transmission to replace it. I am also about to change the transmission filter and transmission oil pan gasket. Could you post a pic or something showing where the VSS is?
Titan engine; done👍🏾
Titan trans; in progress 😁
Titan front and rear diff; 🤔 we'll see
HMMMMM the diffs are definitely on the list. I think on the front I am going to eventually take it apart and check the gears since the fluid was terrible (tons of metallic bits in there). The rear I am going to eventually regear but for now I will install an extended breather and swap the fluid.
@@Rythecarguy
Niice 👍🏾
did you have to undo the starter when you dropped it i have to drop mine on 2010 titan but i thing squirrels got the starter
Yea, you should. If not you will likely catch the trans on it when you are dropping it. Plus if you pull the intake and starter the two top trans bolts are crazy easy to get to.
after watching this I'm not so sure I want to pull the transmission if I have a problem.
It's pretty annoying
That transmission support is pain when its firts time to drop down. 2nd And 3rd is like a breeze. Im gonna do this again cuz my I blew my tranny. This same as xterra trans, I noticed its much easier when you have bodylift lol..
I bet! I am going to do the same on the Titan as I did on the Xterra. I am going to sand away all the rust on the contact points and use chassis grease when I re-assemble. I hope there is not a next time but if there is it should be a lot easier.
Stop blowing trannys 😂
i could feel the anger
Lol I was piiiiissssed
There is only one generation
There is?
2nd gen was in 2016