you need a higher voltage between 40 and 60 volts or at least 40 volts, 22 volts is not enough. It weld but I am very sure that the weld does not look too good.
HomeMade Projects a Arcwelder Works with 15-40 volt (idle 35-70 volts) and 80 - 200 or 400 Ampere Dc. kst's Arcwelder Works with Ac this is Not Good for MMA welding Ac is Good vor Tig welding
duty cycle... 0.0015%, wooden box for safety, and a fan to accelerate the fire! Kudos! There's even a thermal circuit breaker in the microwave oven??? brilliant
Yeah, there he is, nice work mate :D Millions of thumbs for you, I get a video recommended about your Silver Play Button, but you deserve the silver Golden Hands award.
Lo mas impresionante es que el trabajo tan bueno es desmerecido por los tan grandes riesgos de seguridad tan bien transmitidos, no hay excusa, la cuestión es instruir, pero lograrlo de la mejor manera posible, conténtate amigo al saber que lamentablemente no eres el único en esto. Saludos.
I have a concern will that wire used for winding hold a continuous current of more than 100A? And as i know it cannot your machine might get damaged after some use.
Please sir,as I was pulling out the secondary coil from the transformer,I unknowingly cut about 6 primary coil.please, can it still be repaired and how?
If I could make a minor safety suggestion my grade 9 electronics teacher made a point of enforcing, when wiring the power switch, have the circuit connected to the center and the mains coming in from the side. That way the unused terminal isn't live when the device is switched off but still plugged in and if it ever managed to touch the housing or get touched, no one gets shocked
There is a way to get rid of the winding better. It is necessary to saw off in the place of the welding seam and with an easy movement of the hand to remove the winding
great project bro but one question you havn't put any foot switch, capacitors, or delay timers like thing, it will be short circuit soon if we weld continuously for long time plz guide us in this thanks and plz also mention the transformers int put and output voltages and amps.
Olá, curto muito seu canal, será possível vc construir uma máquina de solda só com apenas um trafo que chegaria à 250ah com amperimetro, ou uma máquina mig!
Actually, the idea is not bad if you implement it with a higher transformer frequency and correct windings. You only need a frequency converter or approx. 3-30 KHz, then the transmission strength is much greater and e.g. the right tight 25-50 V winding. 3 khz - 30 khz. e.g. from self-made bistable tilting stage for 2 euros Components: _ 1x microwave transformer (2 low frequency transistors for 40 cents 2 capacitors 20 cents and 2 resistors 10 cents, potentiometer 10 cents) -> 10 hz -> 3 - 30 kHz (Should be about 3-30 khz) -> then two controlled 2x RJH60F7 IGBT 600V 90A 328.9W ADPK Renesas in parallel on cooling plate, as well as a rectifier for 220 V 100 A. There is only one Khz converter in it, a rectifier 220 V, filter capacitor 3-30 Khz, a microwave transformer, 25-50 V winding and e.g. 2 x parallel IGBT transistors as the functional core. Why not make them in Europe. DC control with 100 A dimmer otherwise only max 32 A. Simply 4 additional extra power triacs on an extra sheet in parallel. (Cave, cave, cave also welder circuit diagrams from China on the Internet, there are short circuits and a lot of incorrect circuits in it, in order to disguise some of the stolen, bloated patent crap. Also, the direct current in the middle does not work as a regulator, absolute madness the China fakes on all Google Images Pages.)
you need a higher voltage between 40 and 60 volts or at least 40 volts, 22 volts is not enough. It weld but I am very sure that the weld does not look too good.
HomeMade Projects a Arcwelder Works with 15-40 volt (idle 35-70 volts) and 80 - 200 or 400 Ampere Dc. kst's Arcwelder Works with Ac this is Not Good for MMA welding Ac is Good vor Tig welding
rubbish! most buzz box stick welders are AC
Ac is used for example for alluminium, dc is usually used for steel an iron
You are right,so he made two
،
All your product amazing
Campeón!!!!!
Antonio
Argentina.
I like creative channal
Amazing Creative video
duty cycle... 0.0015%, wooden box for safety, and a fan to accelerate the fire! Kudos! There's even a thermal circuit breaker in the microwave oven??? brilliant
wires on the thin side. nice job
Wow..!! Thank you boss.
Very nice and cool
You are a very ingenious genius
Look beautiful
Your welding machine look awesome! Nice👍 😎
Very very nice
Yeah, there he is, nice work mate :D Millions of thumbs for you, I get a video recommended about your Silver Play Button, but you deserve the silver Golden Hands award.
Cool nice idea
Great bro superb
Very Nice !! Like !!
Lo mas impresionante es que el trabajo tan bueno es desmerecido por los tan grandes riesgos de seguridad tan bien transmitidos, no hay excusa, la cuestión es instruir, pero lograrlo de la mejor manera posible, conténtate amigo al saber que lamentablemente no eres el único en esto. Saludos.
Lo bueno q al hacer esto ahorras dinero por lo q en las tiendas es mas caro porque ofrecen elementos con seguridad y confort
Can you make a variable frequency drive that takes single phase and powers three phase ??? Now that is something that would get views !!!!!!!!!
You are genuous man 🤗🤗🙌🙌
When you have everything in stock the creative is too easy
ايوه صح
Yes bro we can't make this because we don't have enough thing for making. So we are just watchers.
Good job
i am just 13 and u are my inspiration
i have been watching every video that u uploaded
Nice and cool video sir please make video on prjocter ☺☺☺☺🙄🙄🙄🙄☺☺☺🙄
Hello, you did a great job
Can you start an online store to buy thos things
China is my best country
Very good
I like it very much.
Amazing work, bro! Really good! 😀
Creative Channel jindabad
super good job like
Saludos muy buenas trabajo
First time I hear your sound 6:01
Nice video
I have a concern will that wire used for winding hold a continuous current of more than 100A? And as i know it cannot your machine might get damaged after some use.
genial me gusto este vídeo te doy mi LIKE
Please sir,as I was pulling out the secondary coil from the transformer,I unknowingly cut about 6 primary coil.please, can it still be repaired and how?
Cameout amazing! Great work. Love your videos. 👍
Muy bueno 😉👌👏😁👍 me gustó el cómo se reciclaron los transformadores, 🙂
Teobaldo P. ptkghvbkvlb
Teobaldo P. ׶123?+!%
!$7%@\Π]
If I could make a minor safety suggestion my grade 9 electronics teacher made a point of enforcing, when wiring the power switch, have the circuit connected to the center and the mains coming in from the side. That way the unused terminal isn't live when the device is switched off but still plugged in and if it ever managed to touch the housing or get touched, no one gets shocked
Good job bro I like your mechanism
good job KST
This guy is really a handyman.. i can see not from what he makes but from his skillful hands, and knowledge
It is good for your all videos
Waiting for this for long time
Super video uncle
very good
I like it thanks again
You are awesome sir ... great work
This dude is the reason why I subscribe. He can make something out of nothing. Now that's amazing.
I don't think that little power switch you are using is rated for this amount of power 😂😂😂
eu tentei e não pegou, agora com o seu video vai dar certo. obrigado!!!!!
Pl
6:00 min uuuuh 😂👽🖒
There is a way to get rid of the winding better. It is necessary to saw off in the place of the welding seam and with an easy movement of the hand to remove the winding
No.1 drill machine
gooood .. thak U
Amazing video
Iove....u.....Fc..
It's not surprising he neglected to show the quality of the weld. This is just a waste of time, you need higher volts at that amps.
Make a video on DIY mini hydrolic press.
Man. That's impressive. Brilliant job dude.
HOW TO MAKE 12 VOLT BATTERY CHARGER AT HOME ( MakeloGy ) ruclips.net/video/qDhzpQ9lZVA/видео.html
Yes 👍
How many turn's did you do for every transformer?nice work,i will try this 😊
How many turn?
up step Control Rectifier & Display current Amp. well so good^^
احب هاد المخترع كتير
Please DIY A regulator of ampers
Yes this would be awesome. A scariac or something.
Any one from 2020 🤔🤔🤔
Very useful video.
Brilliant welding :)
Why don’t you use those other tools you made to build this thing?
great project bro but one question you havn't put any foot switch, capacitors, or delay timers like thing, it will be short circuit soon if we weld continuously for long time plz guide us in this thanks
and plz also mention the transformers int put and output voltages and amps.
awesome work man
Very nice Video👍
your my idol
Awsome creative channel
Great job brother
Super machine
Nice_great👍👍👍
Next time don't strip wires like that. You can slice your hand. Always pull away from your body.
Canel keratif memang hebat itu fafo rit ku
Mantappppppppppppppppppppppppppppppppppp
It's oke working good
You are the best
You should make some stuffs with supercapacitors. I would really like to see. Thank you for the video BTW.
Nice video sir I love you sir
#MRINDIANCREATIVECHANNEL
You are best bro
Great, but it needs a voltage selector for thin or thick metal you really need it on a welder
Kreatif👍
Pls make a video about basic/advanced tools & materials for electronics
Great I need to make one ..
Olá, curto muito seu canal, será possível vc construir uma máquina de solda só com apenas um trafo que chegaria à 250ah com amperimetro, ou uma máquina mig!
awesome nice work
briliant
Actually, the idea is not bad if you implement it with a higher transformer frequency and correct windings.
You only need a frequency converter or approx. 3-30 KHz, then the transmission strength is much greater and e.g. the right tight 25-50 V winding. 3 khz - 30 khz. e.g. from self-made bistable tilting stage for 2 euros
Components: _
1x microwave transformer
(2 low frequency transistors for 40 cents
2 capacitors 20 cents and 2 resistors
10 cents, potentiometer 10 cents) -> 10 hz -> 3 - 30 kHz
(Should be about 3-30 khz) -> then two controlled
2x RJH60F7 IGBT 600V 90A 328.9W ADPK Renesas in parallel on cooling plate, as well as a rectifier for 220 V 100 A.
There is only one Khz converter in it, a rectifier 220 V, filter capacitor 3-30 Khz, a microwave transformer, 25-50 V winding and e.g. 2 x parallel IGBT transistors as the functional core. Why not make them in Europe.
DC control with 100 A dimmer otherwise only max 32 A. Simply 4 additional extra power triacs on an extra sheet in parallel.
(Cave, cave, cave also welder circuit diagrams from China on the Internet, there are short circuits and a lot of incorrect circuits in it, in order to disguise some of the stolen, bloated patent crap. Also, the direct current in the middle does not work as a regulator, absolute madness the China fakes on all Google Images Pages.)
Eres un genio muchas gracias desde Andalucía por hacer estos vídeos tan creativos un saludo máquina
good
Para regular a saída vc pode usar um potenciômetro potente
wow, superb
You are very intelligent
Wonderful I want to work like you