MINI COOPER OIL PAN SUMP GASKET REPLACEMENT *Full Guide*
HTML-код
- Опубликовано: 13 окт 2023
- So I fully rebuilt this engine and now it's leaking oil. Let's see if I can fix it again!
The following links are affiliate links that the channel recieves commission for
Buy Elring Dirko HERE: amzn.to/3ZZccEP
Donate To The Channel Via Paypal HERE: bit.ly/3u2yEMz
Join Patreon HERE: / georgeausters
Tools I Use!
Nitrile Gloves: ebay.us/LehsUZ
Sealey Cordless Ratchet Kit: amzn.to/3bgAsKn
Small Dewalt Impact Wrench: amzn.to/2T4igdi
Big Dewalt Impact Wrench: amzn.to/39NOrEu
Dewalt 5ah Battery: amzn.to/39tRRhL
Dewalt Battery Charger: amzn.to/3dkwlxb
Impact Socket Set: amzn.to/3a8zcpQ
Torx Socket Set: amzn.to/32EbnDV
Female Torx Socket Set: amzn.to/2PzAZMQ
Digital Torque Wrench: amzn.to/3dlCP37
Torque Wrench: amzn.to/2VF0YpI
Oil Drain Pan: amzn.to/3dm00pJ
Rhino Ramps: amzn.to/3zKGiy7
Jack Stands: amzn.to/3pTSKs5
Oil Transfer Pump: amzn.to/3UAYTqX
Smoke Vacuum Leak Tester: amzn.to/3rVN9lG
ISTA D / BMW Coding Kit: ebay.us/ZiLtgB
➢ Subscribe For Regular Videos ➢ goo.gl/x0Juyl
➢ Instagram: / georgeausters
➢ Facebook: / georgeausterspage
➢ Email: GeorgeAustersBusiness@gmail.com
➢Amazon Prime Free 30 Day Trial: amzn.to/2v6kVe5
➢Best Place For Car Parts: amzn.to/3DZykGe Авто/Мото
Remember.. I will be giving my V12 BMW 7 Series to 1 of you!
TO WIN ENTER HERE: www.paypal.com/donate?campaign_id=MLP4H8VAE2B9U
Same as I used on ours. Let it fully harden for 24 hours before adding any oil - no more leaks from ours since the RTV was used
Glad to hear!
That wasn't as bad a job as i thought it would be ,and i was surprised that RTV was factory used . It is nice to see the Mini is getting good care as you put a lot of time into it .
Yeah really not too bad on this car!
I recommend using axle stands when working under the car. Those plastic ramps are not safe. I had one collapse under the weight of the car. Luckily, I was not under the car at the time.
Pretty sure these are rated to 3 tonnes per ramp.. They're not cheap chinese ones!
Thank you for sharing this how to! I was thinking of using a sealant along with a new gasket. Is that a good idea or better to just use sealant?
Nice video, thank you so much🙏🏻
You're welcome!
Nice job George! :)
Thanks!
Love the MINI content 😎although i'm slightly biased 😂
Appreciate it!
There is a technical service bulletin for this car that states that the gasket must not be used, because the oil pan becomes deformed after removal. That's why it leaked. I'm about to replace mine using liquid sealant as well.
Yep👍🏻
You definitely need some kind of a car lifter. I'm very sorry to see you struggling like that 😢
That's the plan man.. Gotta save up for the garage first though!
I always use a light smear of RTV on any paper gaskets and never had a problem.. Let the attacks begin 😂
I can't see it hurting so why not!
Same here, we will fight them all off lol.
No matter how much RTV you put on the paper gasket, it still leak.
@@Challenger380aak Still no leaks.
I replaced 2 gaskets in one month and the second time the mechanic used one full tube of rtv.with paper gasket ,still weeping.
Would this be the same with an r50 ?
George,how can you get the plastic cap of corsa linkeage,been trying all day,what is underneath it can i cut the top off?
Please...what was the torque on the oil pam screws. Thank you.
👍🏼👍🏼
12 NM. He mentioned it in the video
I have just installed a gasket on the sump last week, this is bad news for me...
Noooo! Check for leaks and let me know how you get on👍🏻
I have replaced 2 gaskets and both leak
@@Challenger380aak Me too, the new gasket leak, so in the next change oil im going to do like that
Will an oil pan leakage make the engine smoke???
If the leak is over the flex pipe then , yes it will smoke. My car has this problem now. Ill be doing this DIY next week
Is this engine in 2012 Countryman. My oil pan is weeping even after replacing the gasket twice .
Did you watch the video?
I did. I think my engine is the same as yours just like to confirm?
Next week i will make the gasket like you have shown in the video. I spent $900 replacing gaskets. Its a shame, Mini engineers can never make their cars perfect.