Crazy to think about it huh? We imagine it being like big boy Lego but you literally have to think about lubricating every moving part, every torque value for hundreds or thousands of parts. I do wonder what that sponge is for though.
@@simracingyogi626 prevents the fuel from slushing around in corners, because you want to make sure the engine always gets its fuel. The g-forces and motions during a race can cause the fuel to move around in the tank and can cause the fuel pump to suck air instead of fuel, the course sponge prevents this
@@suketgajah8107 Its Nm - Newtons per meter. 10Nm is the force of 10N with a 1 meter lever action. 10N is equal to 1Kg, so 10Nm is the same force that a 1Kg weight at the end of a 1 meter rod would produce.
When you have all the parts there it's the most relaxing thing in the world. When you're chasing down parts, bodging fits and being dragged away to deal with customers it's the worst
Chapter Of Build This Monster 0:18 1/25 Frame Steering Head Pipe Clamp Torque Force : 20 Nm Exhaust Support Torque Force : 7 Nm 1:15 2/25 Swing Arm Swingarm Pivot Torque Force : 60 Nm 1:32 3/25 Rear Shock 1:56 4/25 Suspension Steering Stop Torque Force : 10 Nm 2:23 5/25 Dashboard Bottom Triple Clamp Torque Force : 12 Nm 2:46 6/25 Handlebar Handlebar Clamp Torque Force : 8 Nm Front Axle Clamp Torque Force : 15 Nm 3:11 7/25 Engine Engine Bearer Torque Force : 35 Nm 3:33 8/25 Electronics 4:04 9/25 Engine Flap 4:18 10/25 Gear Shifter 4:34 11/25 Brakes Front Brake Caliper Torque Force : 40 Nm 4:51 12/25 Exhausts (This One Is Akrapovic Exhaust) 5:20 13/25 Radiator 5:28 14/25 Chain 5:39 15/25 Rear Wheel Front And Rear Wheel Axle Torque Force : 50 Nm 6:02 16/25 Front Wheel Front Disc Bolts Torque Force : 10 Nm 6:23 17/25 Air Filter Fuel Tank Bolts Torque Force : 10 Nm 6:57 18/25 Fuel Tank 7:05 19/25 Radiator Liquid 7:17 20/25 Seat 7:21 21/25 Fenders 7:29 22/25 Lever Guards 7:39 23/25 Fuel Tank Sponge 7:50 24/25 Fairing 8:04 25/25 Test Please understand This is what I volunteered to do If You Watched And Is Satisfying You Can Still Watching It.
Great respect for Red Bull, KTM and all the sponsors involved in the rookie cup. The class where talent goes above the thickness of the parents wallet. Keep it going!
Looking at how casually they carrying the engine block, frame, rim, swing arm is just amazing, it shows how light those exotic material components compared to regular bikes
when people say they could never do this i say you are wrong trust me these guys for the most part are building the same bike over and over again so now they can just knock this out! trust me if you get your hands on bikes and you do it over and over again trust me you will be this good to
Hello Redbull team, Myslef Jithin V Eapen. I’m a professional motorcycle mechanic for years. In this video it took 7.5 hours to build this insane race bike, but i’m 100% confident that i can finish this race bike build under 5 hours. Will you give me a chance to prove myself?. I’m always wanted to be a pit mechanic. Thank you 🙏🏻
I want this bike...but with the 300cc two-stroke single engine from the XC and the bare minimum to make it street legal.😍😍😍😍😍 The beautiful simplicity of a race bike, the epitome of form follows function😍😍😍😍😍😍😍
First time hearing a 2 cylinder that sounds like 1 cylinder. This is actually the video I've been looking for decades. I actually found a video hearing 2 - 2 system exhaust and I am now satisfied 😌. rather than a typical 2-1 exhaust like r3, mt-07, 302, etc.
EVERY RUclips video noob could learn a lesson from these video's... NO TALKING, no obtrusive metal soundtrack, no chest beating, perfect cut pacing, tasteful fade transitions, consistent lighting, cadence, no overt selling... Doesn't hurt to have broadcast cinema gear and lighting sure but any schmuck with a decent DSLR and a clue can do something pretty damn close...
Cool video. Definitely ASMR vibes and relaxing to watch. When I read "build," though, I guess was expecting more about the engineering, tuning, etc also. This video is assembly. When I think of "building," assembly is definitely a part of it, but so much more goes into building these fantastic machines. Would be cool to see more of that from RBM. Just me? Okay.
Il miglior video in assoluto di un assemblaggio di una moto da GP nei minimi dettagli, bravi meccanici che lavorano a regola d’arte, ordinati e puliti 💪🏻😎
Woww so cool !! So therapeutic ..I would love to spend my 8 hrs of work doing this amazing work of assembling the parts !! I m a software tester by profession n love to test KTM as well!! Can some one Plz tell me as why the sponge was inserted into fuel tank..?
This is the reason why all the mechanics crying on pit when the racer crash
👌😂
Crazy to think about it huh? We imagine it being like big boy Lego but you literally have to think about lubricating every moving part, every torque value for hundreds or thousands of parts. I do wonder what that sponge is for though.
U got pinned
@@simracingyogi626 prevents the fuel from slushing around in corners, because you want to make sure the engine always gets its fuel. The g-forces and motions during a race can cause the fuel to move around in the tank and can cause the fuel pump to suck air instead of fuel, the course sponge prevents this
@@chyrt Cool, thanks for that piece of trivia :)
This is real man's ASMR
no simps allowed
hell yeah
Dude that's f****** awesome
no talking does not equal ASMR
Can u eat it
I don't know why but I really like that they included the torque specs.
yeah that's cool although i don't understand the calculation of it
@@suketgajah8107 Its Nm - Newtons per meter. 10Nm is the force of 10N with a 1 meter lever action.
10N is equal to 1Kg, so 10Nm is the same force that a 1Kg weight at the end of a 1 meter rod would produce.
we are mechanics.. we love torque specifications😄
@@suketgajah8107 I uugvhvv yu yu uuu under a minute video uuuu
@@mc1996 in a unique
beeing a biker and a bike mechanic this is sooooooo relaxing to watch... nothing compares with building a bike... see it taking form
Agreed I’ve rebuilt a few bikes recently and it’s so satisfying to step back and look at your progress
@@phatnum17 i just finish my ZX12R.... refresh it little... from 225hp factory i made it 285
When you have all the parts there it's the most relaxing thing in the world. When you're chasing down parts, bodging fits and being dragged away to deal with customers it's the worst
Thanks for the tutorial, I’m gonna build one myself now.
Best video ever seen.
Beauty of machine.
Chapter Of Build This Monster
0:18 1/25 Frame
Steering Head Pipe Clamp
Torque Force : 20 Nm
Exhaust Support
Torque Force : 7 Nm
1:15 2/25 Swing Arm
Swingarm Pivot
Torque Force : 60 Nm
1:32 3/25 Rear Shock
1:56 4/25 Suspension
Steering Stop
Torque Force : 10 Nm
2:23 5/25 Dashboard
Bottom Triple Clamp
Torque Force : 12 Nm
2:46 6/25 Handlebar
Handlebar Clamp
Torque Force : 8 Nm
Front Axle Clamp
Torque Force : 15 Nm
3:11 7/25 Engine
Engine Bearer
Torque Force : 35 Nm
3:33 8/25 Electronics
4:04 9/25 Engine Flap
4:18 10/25 Gear Shifter
4:34 11/25 Brakes
Front Brake Caliper
Torque Force : 40 Nm
4:51 12/25 Exhausts
(This One Is Akrapovic Exhaust)
5:20 13/25 Radiator
5:28 14/25 Chain
5:39 15/25 Rear Wheel
Front And Rear Wheel Axle
Torque Force : 50 Nm
6:02 16/25 Front Wheel
Front Disc Bolts
Torque Force : 10 Nm
6:23 17/25 Air Filter
Fuel Tank Bolts
Torque Force : 10 Nm
6:57 18/25 Fuel Tank
7:05 19/25 Radiator Liquid
7:17 20/25 Seat
7:21 21/25 Fenders
7:29 22/25 Lever Guards
7:39 23/25 Fuel Tank Sponge
7:50 24/25 Fairing
8:04 25/25 Test
Please understand This is what I volunteered to do If You Watched And Is Satisfying You Can Still Watching It.
You forgot the part where they open a Red Bull
Great respect for Red Bull, KTM and all the sponsors involved in the rookie cup. The class where talent goes above the thickness of the parents wallet. Keep it going!
Looking at how casually they carrying the engine block, frame, rim, swing arm is just amazing, it shows how light those exotic material components compared to regular bikes
7:38 This sponge is placed in the tank to reduce shock in the tank when the rider turns, because the fuel starts to decrease in every lap.
Ouwww
Help with the balance and to stop the gas from transferring to each side of the bike around turns
Nice info
I was looking for this exact comment
😀😀
The sponge stops the fuel splashing from side to side
when people say they could never do this i say you are wrong trust me these guys for the most part are building the same bike over and over again so now they can just knock this out! trust me if you get your hands on bikes and you do it over and over again trust me you will be this good to
all for MX GP bike, lets count the votes.....
Seems easier than an ikea wardrobe.
They are not Building a Machine, That are building an Emotion ❤️😍
Who would like to see KTM M32 - 35 moto3 engine building ? Thumb Up !
it's good they tell us the torque figures, you know for when we have to build our own gp bikes to go to the local supermarket
I'm sure it's useful to RC250 owners. Like tank bolts, front disc bolts. Not everything they show is exclusively for racing
honestly this was so satisfying to watch, but now every single time I see a racer crash I feel the mechanics pain
There are few things more satisfying than hearing the click of a torque wrench/ ratchet
Why is this so relaxing? ♥️
Beautiful machine.
You know it's triple fancy when they put the torque specs up, wear gloves, and use orange markers
i thouhght that was standard practice😅
It's so satisfying to watching assembly of racing bike.
Hello Redbull team, Myslef Jithin V Eapen. I’m a professional motorcycle mechanic for years. In this video it took 7.5 hours to build this insane race bike, but i’m 100% confident that i can finish this race bike build under 5 hours. Will you give me a chance to prove myself?. I’m always wanted to be a pit mechanic. Thank you 🙏🏻
These mechanics are race engineers.....
Yeah these guys don’t know what they’re doin
thankyou so much for the video now i can finally build by own bike
When he cracked that RedBull can open, it made me smile. It's like it's is an essential part of the assembly process, after the torque values :D
This is so therapeutic. ❤
The perfect comment.
I want this bike...but with the 300cc two-stroke single engine from the XC and the bare minimum to make it street legal.😍😍😍😍😍
The beautiful simplicity of a race bike, the epitome of form follows function😍😍😍😍😍😍😍
How nice it must be to work on brand new beautiful, non-rusty parts. I would love to be a bike mechanic some day.
4:03 ah yes, the all important engine flap
Probably what their word for it directly translates to
That was Beautiful...
That throthle response is amazing
This is better than the mtb builds, we want the motogp KTM build!
RED BULL IS JUST AMAZING
I want this playing in my living room on repeat for the rest of time.
this becomes the first youtube video of mine which I did not even skip a second !
Watching this every time before sleep cures my insomnia. I feel so at peace
This was very pleasant to watch
The clicks are very relaxing
This video is addictive
Now, I would like to show a version of me doing the same thing with little experience and without the right tools😂
Object beauty. Magnifique
This hits like an ASMR video
Everything is done so delicately, I love it
First time hearing a 2 cylinder that sounds like 1 cylinder. This is actually the video I've been looking for decades. I actually found a video hearing 2 - 2 system exhaust and I am now satisfied 😌. rather than a typical 2-1 exhaust like r3, mt-07, 302, etc.
Sorry to burst your bubble but this is a 1 cilinder engine. Both exhaust ports have their own pipe to improve gasflow
its a single cylinder nitwit. you watched them put in an engine with only one cylinder, why on earth would it be twin cylinder??
@@flyingdutchy01 oh I thought it was 2 cylinder, thanks for correcting me. I'll wait again for decades to find a 2 - 2 system 2 cylinder engine 😄
Art and engineering in the same video.
I think i already watch this video for like 10th time in a week. What a masterpiece🤩🤩😍😍
Manliest ASMR
That thing is a screamer! I love the color combos.
So satisfying .... what a beutiful piece of art ....
Its Amazing to see KTM mechanics doing this kinds of stuff.
Fun Fact: You aren't watching this for the first time....
The iinternet needs more videos like this
EVERY RUclips video noob could learn a lesson from these video's... NO TALKING, no obtrusive metal soundtrack, no chest beating, perfect cut pacing, tasteful fade transitions, consistent lighting, cadence, no overt selling... Doesn't hurt to have broadcast cinema gear and lighting sure but any schmuck with a decent DSLR and a clue can do something pretty damn close...
youtube wildin wit this censorship
Workshop ASMR with relaxing music
way much better content than the MotoGP channel itself
meanwhile you did nothing asshole
@@Lucifer-ll2sw Lol, I assume Thio doesn't work in a social media team of a racing company. (Why so angry?)
@@keeperse6 maybe works for the motogp channel
@@raycath0de I thought the same thing lol
8:30 best build moment
very good video, but engine flap? come on thats a throttle body
That’s exactly what i was thinking when i read the “engine flap” lol
throttle body goes flap floppp lol
In the future I want to be a racer☝️
Greetings from Philippines ❤️
This was Beautiful. Thank you Red Bull.
Real Man's ASMR
Stolen comment
This is art
Its art!
this is the most relaxing video for a motorcycle lover. i hava a question. why did you put a sponge in the fuel tank?
For limiting the fuel movement in the tank, the sponge helps creating a sort of resistance :-)
Keeps the fuel from sloshing around to much
The whole world: Throttle body
KTM: Engine flap! :P
lol
Im a Yammie Fanboy but gosh it would be such a dream to work there!
Berkali-kali nonton tetep menyenangkan
How could one not like this video?
That swingarm is a thing of beauty
Inspiring...
Even if it's only the final assembly
the 250 class is so exciting and its because of these bikes and their riders...
So much work goes into these bikes. It’s incredible.
BUILD+ASMR=👍
Just when I thought I couldn’t get any harder, they started the engine and revved it.
Proud ktm owner ❤️😍
What a magnificent scene ✨
this is my 16th time watching this amazing built 😍
Gorgeous beast.
Cool video. Definitely ASMR vibes and relaxing to watch. When I read "build," though, I guess was expecting more about the engineering, tuning, etc also. This video is assembly. When I think of "building," assembly is definitely a part of it, but so much more goes into building these fantastic machines. Would be cool to see more of that from RBM.
Just me? Okay.
Moto GP: Two Guys.
Formula 1: Ten Guys for a bolt.
😂😂
I’m not a motorcycle guy but this build video is superb!
Nice balance & good traction!
5:00 Low weight 1 piston and double exhausts i love it
My buddy who's a local motor mechanic says "this is pure porn"
They made it look so professional
Single silinder beast
These are surgeons!!Awsome to watch them bring this to life!!
"Engine flap"! I love it
Il miglior video in assoluto di un assemblaggio di una moto da GP nei minimi dettagli, bravi meccanici che lavorano a regola d’arte, ordinati e puliti 💪🏻😎
RedBull always delievers best quality video on particular subject, change my mind:)))
Glad you think so!
ART AT ITS FINEST ❤️
Looks like you can do that at home.
It's like lego!
Not that easy
Crazy that you only need to do the snug tighten on all those bolts. That growl sound of this bike is 🔥
Balinese Tridatu bracelet 😍
Are you Balinese?
@@_bagiasedana2857 Yes 😁
THE BEAUTYFULL OF MOTORCYCLE 👍😀🖒
Really beautiful.
It's like a dream building a Master piece like this I wish I can do it one day
Nice, tomorrow i tear up my bike and put it back again.
Respect!
more of this please Red Bull
Oooh boy, that's smooth as butter. Good job!
Woww so cool !! So therapeutic ..I would love to spend my 8 hrs of work doing this amazing work of assembling the parts !! I m a software tester by profession n love to test KTM as well!!
Can some one Plz tell me as why the sponge was inserted into fuel tank..?
It acts like a baffle to the fuel does no slosh around and away from the pickup.