2020 f150 3.5 Lariat. This videos method worked on my truck like clockwork. I opened up the shutters a tiny bit by hand. 1/4" ratchet with extension to remove the 10mm nuts. I used a magnet to pick the nuts off of the bottom splash guard. I threaded the new emblem before assembly. Stuck emblem in grille and used tape to hold the 10mm nuts on the socket. Reattached hood closer and BAM...35 mins start to finish. I owe you guys a beer!
i just tried this method on my 2023 and the electric air vent shutter makes it more challenging. It was easier to change out by taking front grill out. 👍👍
I purchased custom emblems too from OEM Auto Art on eBay. Very happy with them. Luckily I didn’t have any fitment issues. It went right on with no gaps. Great video!
Thanks for watching. I’m jealous of your perfect fitment. That cost us two hours. Did you check out any of our newer videos? The truck is bonkers now. We kept going.
@@BackroadDriver Yea I’m glad I didn’t run into any issues! I’ve got a 2019 Lariat with the special edition package so mine were painted gloss black and gloss race red! Yes I’m checking the videos out right now! Your truck is awesome!
Best and most detailed video I've seen on how to install these, thanks so much for taking the time. I have my OEM tailgate emblem ready and now I'm gonna bring you guys with me out to the garage and hit replay and figure this thing out. As far as the burnout, it looks spectacular but until I've seen more to compare them with, not sure I'm qualified to rate it =) Let's say a 9 - I'll leave a little wiggle room for the next one =)
I love the blue oval but this is a great update mod. Thanks for watching. You won’t believe the front and rear of this truck now in our current videos if you haven’t seen them already.
Great video, seen these badges, been thinking I would just dip mine, bit maybe this would be better. Awesome burnout, but also why I don't do burnouts in my F150...the one tire track lol. Good job guys!
I love the deconstructed, painted badges. They hold up great and are OEM quality. We changed the factory diff a few videos later and this thing lays em thick now.
I suggest buying them from TC Customs. They are a Ford dealer and custom make them and color match all Ford colors. Use promo code BACKROAD for a little discount. Their site is TCCustoms.com but here is a direct link to the badges. This will ensure that they are perfect and not cattywamp like ours were. www.tccustoms.com/products/custom-painted-ford-emblems-ford-f-150?variant=32543376244815
@@BackroadDriver thanks. I’m torn 😂. The letters o. The emblem are slightly embossed so that would affect the look of the vinyl but as you said…much easier.
How many times has your truck been back to the stealership to be fixed cause youve toasted ypur tranny and what not..i can only imagine with these new ford theu break down once a week
You guys didn’t have the active grill shutters (louvers )on this truck to navigate through did you? When your doing a Close up I can’t see them behind the grill.
What size was the bit used for the bolt for the front emblem? I watched how to take the grille off and to hell with that, I got the sport package so I’d have to pop off the side of my fenders too and I don’t feel Comfortable doing that
That seller isn’t on there any longer. I suggest doing a google search and find a company that makes them to order and make sure you get the correct emblems.
@@BackroadDriver that’s a shame. Haven’t had any luck finding them anywhere. Just decals that go over the emblem. The only emblem replacements I have found don’t offer that color. It’s ok. I’ll leave the stock ones on.
This won’t work if you have the flaps that close on startup. I’m a pretty skinny guy and my hand won’t even fit through them. Better off just taking the grill off.
@@BackroadDriver went back out and started working on it again and I’m starting to see how y’all did it. It’s just a little tedious. I’m glad I figured it out because I really didn’t want to take the whole grill off. LOVE the truck by way
Thanks Caleb. Glad it worked out for you. Since that video we have kind of gone nuts modding this truck. Here is a video from a few months ago doing a little over view. ruclips.net/video/sma1p4ZyIjg/видео.html
This truck is a Lariat Special Edition that can with these lights and a hockey stick stripe kit. Ford probably sells them but Anzo lights would be cheaper.
So I just got these same emblems from OEM auto art for my XLT. I purchased Lariat Sport grill that has the color match which looks way better than the gray XLT. My big question is where can I get those weird nuts for the grill emblem? The "pegs" on the grill emblem don't have any threads on them so I don't see how they tighten down to the grill. Do I need to use the ones off my XLT grill emblem and are they the same?
@@BackroadDriver OK great thanks. Do you think the local dealers have those nuts? It would just be easier I think to stop and pick them up rather than take the emblem off the old XLT grill.
We had to Dremel tool the top middle and bottom middle to make it sit flush on our grill. We wanted it perfect so there will be a little trimming to make it sink down perfect on your grill. Thanks for checking us out!
We make a point to help anyone who asks. I don’t think we have missed a question yet. Thanks for watching. We have done a lot to the truck since that video.
This link has some that are made the same way. These look better than the badges we bought. The price has gone up too. www.etsy.com/listing/694827439/2015-2020-ford-genuine-parts-f-150
Thanks for watching! We added the LSD in this video: ruclips.net/video/ZeMWbhMVhHQ/видео.html And this is our most recent burnout video: ruclips.net/video/UyybNB0io9A/видео.html Here is our complete video playlist until now: ruclips.net/p/PLWLnOjIIZkiZMLFivpT4LMc10tVVTsN3D
![Gucci Mane & Sexyy Red - You Don't Love Me [Official Music Video]](http://i.ytimg.com/vi/j7IBqyFKT4c/mqdefault.jpg)
2020 f150 3.5 Lariat. This videos method worked on my truck like clockwork. I opened up the shutters a tiny bit by hand. 1/4" ratchet with extension to remove the 10mm nuts. I used a magnet to pick the nuts off of the bottom splash guard. I threaded the new emblem before assembly. Stuck emblem in grille and used tape to hold the 10mm nuts on the socket. Reattached hood closer and BAM...35 mins start to finish.
I owe you guys a beer!
That’s awesome! This video was made Bout a year ago. Glad it helped!
Emblem instructions: 10/10
Burnout: 11/10
Brah, you guys are the BEST, I bought the litup emblem, was putting off for a while, this method saved me a ton of headaches, Thanks
You bet!
i just tried this method on my 2023 and the electric air vent shutter makes it more challenging. It was easier to change out by taking front grill out. 👍👍
I purchased custom emblems too from OEM Auto Art on eBay. Very happy with them. Luckily I didn’t have any fitment issues. It went right on with no gaps. Great video!
Thanks for watching. I’m jealous of your perfect fitment. That cost us two hours. Did you check out any of our newer videos? The truck is bonkers now. We kept going.
@@BackroadDriver Yea I’m glad I didn’t run into any issues! I’ve got a 2019 Lariat with the special edition package so mine were painted gloss black and gloss race red! Yes I’m checking the videos out right now! Your truck is awesome!
Glad to have you aboard. We ain’t stopping!
Best and most detailed video I've seen on how to install these, thanks so much for taking the time. I have my OEM tailgate emblem ready and now I'm gonna bring you guys with me out to the garage and hit replay and figure this thing out. As far as the burnout, it looks spectacular but until I've seen more to compare them with, not sure I'm qualified to rate it =) Let's say a 9 - I'll leave a little wiggle room for the next one =)
Thanks for watching and thanks for the 9! If you go to our channel and watch our videos thru I think you will love it!
Great video, love the idea of screwing the nuts on first so they will be easier after in place. Now I just need to get mine ordered.
I love the blue oval but this is a great update mod. Thanks for watching. You won’t believe the front and rear of this truck now in our current videos if you haven’t seen them already.
I definitely would give that a 10/10 on the burnout scale!🇺🇸
Great tutorial! As for the burnout, a solid 9, cause you forgot to lock the rear diff. =)
Cheers!
I did not think I would be giving you the rating I did with out a locking diff but 10 that was incredible
Thanks! This is a journey. It will be fun to see the difference in non vs locking rear.
Backroad Driver yeah more wear on the tires
Thanks for the tip gentlemen and good burnout ! But the one wheel peel made me quiver and a lil scared 😭 but nice 9.9/10
Perfect 10! Y’all are funny together.
Best video I've seen on how to install.
Thanks! Our laziness pays off when we try to plan an easier way.
You are genius for this video! 10 for sure! I was able to get the grill done with just removing the plastic and hood latch l. Thanks for the video!
That’s what it’s all about! Make sure to subscribe and turn the bell on. A lot more to come!
I’m going to try and get rid of the old ones since I only had them for 3 months on the truck. Know anyone that would be interested?
Jeremy Berger, Tim Randall commented on this video that he wanted to buy mine. You could reply to him in the comments and hook it up.
I’ll let him know... thanks!
Great video, seen these badges, been thinking I would just dip mine, bit maybe this would be better. Awesome burnout, but also why I don't do burnouts in my F150...the one tire track lol. Good job guys!
I love the deconstructed, painted badges. They hold up great and are OEM quality. We changed the factory diff a few videos later and this thing lays em thick now.
I've been referring your video to people on Facebook asking how to takr off Emblems!
Thanks Tim! We have some great stuff coming up and I can’t wait for you to see it!
TEEEEEENNNN!!!!! The burn out made me very happy. 👍🏻👍🏻
Great video. I messed up my emblems with vinyl overlays after I removed them. Now I have to replace both. Cheap Etsy vinyl crap! Ugh
You can buy those die nuts/thread cut nuts at advance auto or oreilly.
Awesome vid! What front headlights are those and do you like them?
On the back emblem just leave closed and use a trim tool remover and pry it off
burnout score = burn rating plus burn length length
overall score = burn out score plus cool factor bonus.
score matrix: 1 to 5 with 5 being the best.
perfect score = 10 + cool factor
your burn rating = an epic 5
your burn length = an epic 5
one wheel penalty factor = /2
your overall burnout score = 10/2 = 5
cool factor bonus = 2
total burnout score = 7
Thanks for checking us out. We have evolved. What do you score this one?
ruclips.net/video/UyybNB0io9A/видео.html
I give you guys on the burn out a 10+..
Badass video guys. Awesome!
Nice Job, wish i knew this trick before I did mine. Oh and that was your best burn out yet! lol
Thanks for watching! Being lazy and looking for an easier way sometimes has its perks. You just aren’t lazy enough.
I took mine off the hard way and painted them myself ...same as yours.
If your F-150 has the louvers behind the grille…this won’t work for you. Still an entertaining video though. Pulling the grille isn’t that hard
You can twist the louvers by hand and move them out of the way.
9.7 ... sweet!
I fucking owe you guys big time thank god someone knows there shit
Wait how did you do that burn out? You lightly hold your brakes and step on the gas?
Do you have a link to where you purchased your emblems please? Just got a 2021 F150 XLT and want to change out my emblems. Thanks and great video.
I suggest buying them from TC Customs. They are a Ford dealer and custom make them and color match all Ford colors. Use promo code BACKROAD for a little discount. Their site is TCCustoms.com but here is a direct link to the badges. This will ensure that they are perfect and not cattywamp like ours were.
www.tccustoms.com/products/custom-painted-ford-emblems-ford-f-150?variant=32543376244815
@@BackroadDriver thank you for the quick response.
Anytime!
Had the same question. Followed this link to an error page. Do they not make custom emblems anymore?
They do. Give them a call and get set up. They match paint codes to a T.
Any suggestions on where to buy these? That auto art place seems closed.
I’ve also looked at vinyl covers which seems easier. Thoughts?
The vinyls are a lot a lot easier. They look 85% as good. I think Ford sells black and white emblems. See if there are any on eBay.
@@BackroadDriver thanks. I’m torn 😂. The letters o. The emblem are slightly embossed so that would affect the look of the vinyl but as you said…much easier.
How many times has your truck been back to the stealership to be fixed cause youve toasted ypur tranny and what not..i can only imagine with these new ford theu break down once a week
Fuk the install better your tires then mine lol 2.9 liter whipple 🤙🏼 brother!
Superchargers make every situation better. Did you sub to the channel yet?
any ideas for the 2015?? Don’t want to remove grill etc etc
I bought some emblems but the front doesn’t seem to have that black plastic trim around it. Did I get the wrong emblems ?
You guys didn’t have the active grill shutters (louvers )on this truck to navigate through did you? When your doing a Close up I can’t see them behind the grill.
I do. So I think I'm going to have to remove the whole bumper :(
What headlights are those? And how are they holding up so far?
What size was the bit used for the bolt for the front emblem? I watched how to take the grille off and to hell with that, I got the sport package so I’d have to pop off the side of my fenders too and I don’t feel Comfortable doing that
I wonder if it’s the same on my 2021 xlt 🤔
What etsy seller did you purchase these emblems from? I have the same grey ford and would love to find those badges.
That seller isn’t on there any longer. I suggest doing a google search and find a company that makes them to order and make sure you get the correct emblems.
@@BackroadDriver that’s a shame. Haven’t had any luck finding them anywhere. Just decals that go over the emblem. The only emblem replacements I have found don’t offer that color. It’s ok. I’ll leave the stock ones on.
This won’t work if you have the flaps that close on startup. I’m a pretty skinny guy and my hand won’t even fit through them. Better off just taking the grill off.
If you don't start your truck then you can open them manually. It won't break anything.
@@BackroadDriver they were open. My hand would not fit. They’re spaced too close together. Does your truck have these flaps?
@@BackroadDriver went back out and started working on it again and I’m starting to see how y’all did it. It’s just a little tedious. I’m glad I figured it out because I really didn’t want to take the whole grill off. LOVE the truck by way
Thanks Caleb. Glad it worked out for you. Since that video we have kind of gone nuts modding this truck. Here is a video from a few months ago doing a little over view. ruclips.net/video/sma1p4ZyIjg/видео.html
Beautiful truck! Keep up the work!
I got the same exact truck same color and all. I love those tail lights, where can I find them?
They are the BLIS lane warning lights. Do you have that option?
Backroad Driver I don’t :( If my truck doesn’t have BLIS can I still put these tail lights or no?
You might be able to but I would bet that not having a BLIS specific module of some kind would cause the blis to not work.
Great How to. Do they make those in white? BurnOut with new emblems "10"
We can get you anything you want!
Are those aftermarket headlights? If so who makes them?
This truck is a Lariat Special Edition that can with these lights and a hockey stick stripe kit. Ford probably sells them but Anzo lights would be cheaper.
@@BackroadDriver awesome, mine is a lariat wasn’t aware there is a special edition lariat , thanks!!!
My badges have red in them and the stripe kit was black, red and white.
So I just got these same emblems from OEM auto art for my XLT. I purchased Lariat Sport grill that has the color match which looks way better than the gray XLT. My big question is where can I get those weird nuts for the grill emblem? The "pegs" on the grill emblem don't have any threads on them so I don't see how they tighten down to the grill. Do I need to use the ones off my XLT grill emblem and are they the same?
You should be able to reuse those nuts. They twist and press. More press on than twist.
@@BackroadDriver OK great thanks. Do you think the local dealers have those nuts? It would just be easier I think to stop and pick them up rather than take the emblem off the old XLT grill.
They should. It is a common part.
Did you have to do any trimming to get them to work? Or did they fit out of the box?
We had to Dremel tool the top middle and bottom middle to make it sit flush on our grill. We wanted it perfect so there will be a little trimming to make it sink down perfect on your grill. Thanks for checking us out!
I need these for my F150 do you have the link for these and how much are they?
What did you do with the old emblems? Is buy them.
Of course great burnt out.
My kids fought over them. They have them in their room. They love cars and trucks.
Ha Ha good for them!
Tim Randall are you still looking for some?
@@jeremyberger1850 possibly. What ya got? His much?
11/10
Great
i dont have a problem with the factory emblem . Ford is Ford Original.
Better than the blue oval...
Nah. Who owns Toyota?
i love your shirt lol
Only the real one notice the warrior. You my friend are a real one.
@@BackroadDriver he was up there in the golden age of the wwe
Does the truck not have an electronic locking diff?
Not yet. Did not have one from the factory but we are installing aftermarket. Thanks for subscribing. Big plans for the truck.
@@BackroadDriver curious if you have the larger rear in this or the super 8.8? The super 8.8 34spline doesn't have many good options for lockers
I have the super 88. In a more recent video we changed the whole setup in the rear. We got it right now.
@@BackroadDriver is it the 0-60 video? I'll have to check that out soon then
What exhaust do you have on your truck
Which ones did y'all go with on etsy? I'm gonna go out on a limb and say the 200 dollar ones?
I think at the time I bought them they were about $175 but I bet they have went up.
@@BackroadDriver found them, appreciate the response!
We make a point to help anyone who asks. I don’t think we have missed a question yet. Thanks for watching. We have done a lot to the truck since that video.
Where'd you get the leadfoot emblem?
We bought it on ETSY.
what kind of headlights are those????
These come on the Lariat Special Edition. This truck had the red and black stripe package as well.
Do you have a link to the ones you bought
This link has some that are made the same way. These look better than the badges we bought. The price has gone up too.
www.etsy.com/listing/694827439/2015-2020-ford-genuine-parts-f-150
This video was early on for us. You might like this video. The truck has evolved.
ruclips.net/video/Nxe0VcXXfT8/видео.html
10/10
Where'd you find the new emblem?
Oem auto art on etsy
Does not work on a 2020 with the turbo
Is that an eco boost?
5.0
10!
Almost a 11 if it was a two wheel peal
I’m about to have a locking rear diff and will be throwing 11’s!
Anyone find these emblems on etsy?
9.5
LSD would have made it a 12
Thanks for watching! We added the LSD in this video: ruclips.net/video/ZeMWbhMVhHQ/видео.html
And this is our most recent burnout video: ruclips.net/video/UyybNB0io9A/видео.html
Here is our complete video playlist until now: ruclips.net/p/PLWLnOjIIZkiZMLFivpT4LMc10tVVTsN3D
7.4
10
I rate it a 1.
2 hands on the wheel like a chic.
You let out of it just when burnouts get fun and require any bit of skill.
Hate how these ford emblems look like huge clown noses with that grill
If the blue doesn’t go with your color scheme then it does stick out pretty bad.
@@BackroadDriver either way still looks like a clown nose😂 has nothing to do with colors