Wow, watching you put that handle together I had no idea how beautiful it was going to look once it was finished. That's a work of art, you are on a whole different level!
I love everyone of your knives.but this one by far is my favorite! Stupid question where do you get the anti scale paste from? You seen to be the only one I seen use that type and it look to work very well
Also, you could do a video on how you build your electric forge, then sell the forge and use that to buy the parts for your belt grinder. It really isn't very expensive to build. Look for someone selling a workout bench, or a bed frame. That is angle iron and most of what you need.
Hey, Rd, what is the green anti scale you are using? Someone else asked too, and I never saw a reply. He may be a beginner bladesmith, and you could be an encouragement for them. You shouldn't hold those things, my friend!
It is kind of hard indeed. I've heard of blades made from titanium, but they don't seem very common. He used titanium for the bolsters which don't need much strength. They're commonly made with materials like brass or even leather infused with resin. Titanium is most often used because of other properties besides just strength. Compared to steel, it's lighter, it's nonmagnetic, and it doesn't spark like steel. I remember one example where titanium tools like hammers and wrenches were used in a location where flammable gases were common. Steel tools are stronger and much cheaper, but safety was a far more important consideration.
finde deine Arbeit super ,du sagst du kommst aus der Schweiz..ich auch ..würde gern mehr über deine Arbeit erfahren,gibt es eine Möglichkeit dich mal telefonisch zu kontaktieren..wenn ja dann melde dich doch bitte bei mir ,entweder hier oder auf meiner Homepage Gruss Alex
![VICTOR Denmark Open 2024 | An Se Young (KOR) [1] vs. Gregoria Mariska Tunjung (INA) [5] | SF](http://i.ytimg.com/vi/Y3QEyCih85s/mqdefault.jpg)
![Wiz Khalifa - Khalifa's Home [Official Music Video]](http://i.ytimg.com/vi/wnrLCTe0Nz4/mqdefault.jpg)
I love to see the whole process of making knives. Your video is very well done and so are your knives. Congratulations...
Thank you very much!
Wow, watching you put that handle together I had no idea how beautiful it was going to look once it was finished. That's a work of art, you are on a whole different level!
I love this because I love watching a creative and artistic human mind at work. Wonderful !!
That handle is absolutely beautiful!!!
Cutting that tomato was just a show of strength. Great work 😃
I love that kitchen heat treating
2:11 love that contraption!!!
na das ist doch mal ein tolles messer !!!!!! SUPER ARBEIT weiter so !!!!!
کوره دم رینیل همه چیشتتان فرررره خوه👍👌
precioso cuchillo la verdad una obra maestra te felicito ojala algún día llegue hacer alguno como ese.... saludos
WOW! An absolute work of art.👍👍
Thank you very much :D
this music is awesome
Thank you for showing, very nice hand work, imagine what you can
do if you had
mechanical
tools, like a 2x72 grinder, metal saw…Have a nice day.
So glad to see a new video from you.
Очень достойная работа, браво, мастер!
Great job. A real competitor for Slavik Tely.
Excellent! Thank you for taking time to share the excellent job.
ojala pudiera darle 1000 likes excellente trabajo. hermoso cuchillo
Lindo trabalho , Parabéns
Рукоять ножа обалденная и нож тоже.👍👍👍
Good to see you're back
Thanks :)
Its verry Nice! Thanks!
Great work
it was very good
I love everyone of your knives.but this one by far is my favorite!
Stupid question where do you get the anti scale paste from? You seen to be the only one I seen use that type and it look to work very well
Also, you could do a video on how you build your electric forge, then sell the forge and use that to buy the parts for your belt grinder. It really isn't very expensive to build. Look for someone selling a workout bench, or a bed frame. That is angle iron and most of what you need.
Very nice work
Very nice!
Amazing!
Ficou muito bom.
Напильником, без гриндера - супер!
Done with love and care
how long it takes to make this beautioful knife?
Hey, are you the one who bought all the elbow grease? Its sold out! Btw really great job on that beveling process.
Beautiful on knife. You should make a whole kitchen set. Paring knife, meat cleaver, steak knife ect..
I'll do that maybe in the future :)
Great work once again! Can you approximate the hours put in for this? Thanks
Thank you! I guess around 30 hours...
Bru.. no lie, I would buy one of these knives if you sold them!
Hey, Rd, what is the green anti scale you are using? Someone else asked too, and I never saw a reply. He may be a beginner bladesmith, and you could be an encouragement for them. You shouldn't hold those things, my friend!
ken Smith , my bedt guess is this stuff
www.duffycompany.com/content.cfm?page=Condursal_0090.cfm
O-O NICE
11:27 😍😍😍😘
What brand of files do you prefer to use?
i want this knife ..
What is the handle made from
hey! Im interested in one of these. How can we buy one?
Great work,at 3.50 because you paint it with color?
thanks, no, it's heat treating compunt to prevent decarbonization
www.duffycompany.com/content.cfm?page=Condursal_0090.cfm
This may be a dumb question but what are the black pieces in the handle??
It's a G10 liner
U do great work. Stop playing music and u will have subscribers in the millions
8:34 what is the green thing? plastic? wood? ¿?
Its stabilized wood
You use titanium to make a knife, right?
how can ı get this wood ???
Steel N 690?
Wonderful work, but dont you want to buy or build yourself a belt grinder? So you can work faster and dont need to use your file for everything :D
I've been thinking about thatfor a long time. But even building one is quite expensive...
is not titanium kind of hard metal ?
It is kind of hard indeed. I've heard of blades made from titanium, but they don't seem very common.
He used titanium for the bolsters which don't need much strength. They're commonly made with materials like brass or even leather infused with resin.
Titanium is most often used because of other properties besides just strength. Compared to steel, it's lighter, it's nonmagnetic, and it doesn't spark like steel.
I remember one example where titanium tools like hammers and wrenches were used in a location where flammable gases were common. Steel tools are stronger and much cheaper, but safety was a far more important consideration.
knife titanium???
🤔🤔🤔
First
finde deine Arbeit super ,du sagst du kommst aus der Schweiz..ich auch ..würde gern mehr über deine Arbeit erfahren,gibt es eine Möglichkeit dich mal telefonisch zu kontaktieren..wenn ja dann melde dich doch bitte bei mir ,entweder hier oder auf meiner Homepage
Gruss Alex
Cha mer dich au in Real life träffe? (nur us reiner neugier)
Was ist das ??? 3:44
What's this ??? 3:44
its kind of presarvative i think
4 anti blackink
@@alipehlivan3326
Thanks
Sttel
The music was 🤮🤮🤮🤮🤮🤮