My tube at the 1:14 mark was disconnected. Probably vibration and the small clip that's supposed to hold it. I reconnected it and now the NF is gone and it's working fine.
Old school top loaders with mechanical analog controls are the best. All this digital tech talking appliances is a nothing but a trap to keep the parts /repait industry in business. Gimme an old speed queen any day
We inherited a front loader set 2 years ago when my husband's grandmother passed away. I hate the washer with every fiber of my being. I can't wait for this washer to give me an excuse to replace it.
I wish I had agreed with your statement before I paid a fortune for this crap front loader I have! It sure is prettier than my top loader but I hate it.
Wish there was more information on the door switch. Recently took our Samsung washer apart and replaced the bearing and it worked totally fine once and now doesn’t want to fill with water. Checked continuity and all other steps and that all checks out so I think maybe we may have missed something putting the whole thing back together or did something with the door switch wrong but don’t know how to check
On my Duet, it would not fill due to poor connection at the pump. The controller will not energize the valve if it sees no continuity at the pump. Not even in the diagnostic mode. I replaced the main board with no result. Then I noticed my new pump was not running. Loose connector. This failure is not in the manual.
How do I know if it's the Water Level Switch or the Main Control? If the water level only fills a few inches & light is stuck on "sensing" mode. I've already replaced the Water Inlet Valves, that didn't fix my problem.
Just moved into an apartment that was buried in pet hair.. the laundry room was a disgrace. The washer, only a few years old, was caked in pet hair. Now I'm finding that the water sometimes doesn't come out, and it only works on Bulky and Heavy settings. Is something possible clogged or broken? What could be happening?
Exactly, they don't want to talk about that...nine switches and sensors later and still can't wash clothes. Deviant manufacturers build this junk to be replaced and not repaired 😢
My question is this, what do you do when you have water going to the soap compartment, but it won't go into the wash tub? , I've tried unplugging and plugging back in, still same issue. Do you have a trouble shooting vid for this problem??
There is an obstruction in the tube, probably a sock. If you take the top off--three screws in the back--you can squeeze the tube out of the drum, remove the obstruction, and replace it back.
I have a similar problem, except that there's is some water that goes into the wash. But I can't put large loads because everything doesn't get washed which causes a smelly like mold oder.
@@richardcorrea2181 Hi, I looked online there were a couple of different things mainly the water pressure level. I'm having someone to come over and fix it.
Sounds like the Solenoid Valves have failed completely. If they have they will need to be replaced or your machine may be worn out meaning you will need a new machine
It was so difficult to get supplies to repair my electrolux washer myself, and even the repairman said new supplies would take a long time coming. Had to replace the washer since my laundry had become too big a mountain and we are running out of clothes! Lol
I’m having the same problem I cleaned out the front filter it was a mess but now No water is going into the washer before that it was filling but not draining
I have a Wfc7500vw2 whirlpool washing machine and when I load it and close the door the lock door indicater Blinks and 90% of the time it immediately fills with water and goes through a normal washing cycle, but in 10% of the time I’ll load the washer , push the start button and the lock door indicator just blinks not allowing the tub to fill or if it does and can take 3 to 5 minutes to start filling with water or not fill at all. What is causing this 10% problem
@@tassymccormick you should realise front loading washing machines are not rubbish They are better and gentler on clothes and spin way faster extracting more water
I changed the water pressure on my Samsung front loader so that it could use more water and now after it fills with water I get an errror code nf and starts draining water. please help me!
![ARGENTINA vs. PERÚ [1-0] | RESUMEN | ELIMINATORIAS SUDAMERICANAS | FECHA 12](http://i.ytimg.com/vi/xtI25ENDDSY/mqdefault.jpg)
My Inlet valve had continuity and I still replaced it. Washer works again. Being an electrical person ,continuity doesnt always mean good.
Thank you for the advice. Your video help me diagnose the problem. Now I will order my replacement parts from you
Thank you so much for the very helpful information!
You're welcome!
If you would like to give us a review, here is our link: g.page/r/CcVUrahZNozMEBM/review
Have a great day!
My tube at the 1:14 mark was disconnected. Probably vibration and the small clip that's supposed to hold it. I reconnected it and now the NF is gone and it's working fine.
Old school top loaders with mechanical analog controls are the best. All this digital tech talking appliances is a nothing but a trap to keep the parts /repait industry in business. Gimme an old speed queen any day
Yes!! This is our 2nd one..I told him NOT to buy another one..two of them, same damn problem!
We inherited a front loader set 2 years ago when my husband's grandmother passed away. I hate the washer with every fiber of my being. I can't wait for this washer to give me an excuse to replace it.
I wish I had agreed with your statement before I paid a fortune for this crap front loader I have! It sure is prettier than my top loader but I hate it.
Power off message and not filling. Found clogged filter. Opened filter plug removed items and now it works!!
Wish there was more information on the door switch. Recently took our Samsung washer apart and replaced the bearing and it worked totally fine once and now doesn’t want to fill with water. Checked continuity and all other steps and that all checks out so I think maybe we may have missed something putting the whole thing back together or did something with the door switch wrong but don’t know how to check
Thanks for the video 👌👌👌
On my Duet, it would not fill due to poor connection at the pump. The controller will not energize the valve if it sees no continuity at the pump. Not even in the diagnostic mode. I replaced the main board with no result. Then I noticed my new pump was not running. Loose connector. This failure is not in the manual.
Thanks!
Thank you so much for your support! We hope that you have a great day.
How do I know if it's the Water Level Switch or the Main Control? If the water level only fills a few inches & light is stuck on "sensing" mode.
I've already replaced the Water Inlet Valves, that didn't fix my problem.
Just moved into an apartment that was buried in pet hair.. the laundry room was a disgrace. The washer, only a few years old, was caked in pet hair. Now I'm finding that the water sometimes doesn't come out, and it only works on Bulky and Heavy settings. Is something possible clogged or broken? What could be happening?
Thanks very much I got my washer working again thanks to u
,,,,,,,,,,,,,, 2 Esdras 2: 32 -100 ''''''''''''''''''' ;;;;;;;;;;;;;;;;;,,,,,,,,,,,,,,,,,,
Can u bypass the switch or solenoid
Exactly, they don't want to talk about that...nine switches and sensors later and still can't wash clothes. Deviant manufacturers build this junk to be replaced and not repaired 😢
No.
Thanks
in final anything could be a problem.
thank for the obvious
My question is this, what do you do when you have water going to the soap compartment, but it won't go into the wash tub? , I've tried unplugging and plugging back in, still same issue. Do you have a trouble shooting vid for this problem??
There is an obstruction in the tube, probably a sock. If you take the top off--three screws in the back--you can squeeze the tube out of the drum, remove the obstruction, and replace it back.
thank you!
I have a similar problem, except that there's is some water that goes into the wash. But I can't put large loads because everything doesn't get washed which causes a smelly like mold oder.
@@denishamolson8969 mine is kinda doing the same thing did you figure it out?
@@richardcorrea2181 Hi, I looked online there were a couple of different things mainly the water pressure level. I'm having someone to come over and fix it.
Daewoo airpower not rotetable onl one round and stopped
My washer doesn't hold water when filling please advice
Hi if washing machines fill after thrw away bt not washingbt they spin
I've got an older Frigidaire front loader . When you start to wash close it just puts out a lil bit of water
Sounds like the Solenoid Valves have failed completely. If they have they will need to be replaced or your machine may be worn out meaning you will need a new machine
If any of the coils test "negative" for continuity . . . Not the correct choice of word
I have Ocean model number WFO 1061 LZ isn't turning
My Samsung front load 12kg after one hour coming door error. I already change door switch. But same problem. Plz help me
Samsung front loading washing machine inlet valve supply intermited coming
How do you. Take front off so you can get to the switch that you use to turn on the machine
It was so difficult to get supplies to repair my electrolux washer myself, and even the repairman said new supplies would take a long time coming. Had to replace the washer since my laundry had become too big a mountain and we are running out of clothes! Lol
LOL
Damn. I just got an electolux and it’s not filling with water. Is it a bad washer?
my washer has water coming out of the both hose but will not go in the washer took the hose off and the screen is are clear
Thank you, it's informative!
How do reset
My old Miele doesn’t fill up ugh
Ifb front lode water level switch test continuti
I took off the filter in front of the washing machine, put it back and boom. No more water filling in my washing machine. Any idea why??
I’m having the same problem I cleaned out the front filter it was a mess but now No water is going into the washer before that it was filling but not draining
I have no power in the water valve in a GE wcvh6600hww front load washer need help,I have power in the board,
I have a Wfc7500vw2 whirlpool washing machine and when I load it and close the door the lock door indicater Blinks and 90% of the time it immediately fills with water and goes through a normal washing cycle, but in 10% of the time I’ll load the washer , push the start button and the lock door indicator just blinks not allowing the tub to fill or if it does and can take 3 to 5 minutes to start filling with water or not fill at all. What is causing this 10% problem
When I turn on the front loader to normal it will not fill up with water then turns off after 3 mins what do I do
did you ever get a fix for this mine is doing the same thing
( Kenmore ) Water won't run into machine when turn on but it will spin when you put it on spin
Raise the pipe that allows water outflow up n hang it
my washer timer is stuck at 1 hour and 45 minutes how do I fix it?
My maytag washer says 0:00 but won't turn on
Trash don’t ever buy a front loader
I wish I never had
@@tassymccormick lol more tech = more problems !
@@tassymccormick you should realise front loading washing machines are not rubbish
They are better and gentler on clothes and spin way faster extracting more water
I changed the water pressure on my Samsung front loader so that it could use more water and now after it fills with water I get an errror code nf and starts draining water. please help me!
Susana Pedro y
Sounds like after you messed with the water pressure it sounds like the pressure was too high(over 120 PSI)
How to open door
You didn't make anything easy. My washer is in a thousand pieces
Bj
Sure wish they would have stuck to electric wash machines instead of electronic, simpler is better!