Fun fact, if your journeyman drops a 1 1/8th” SDS hammer drill with an 8amp battery off the top of an extension ladder on to the clear lid of a packout organizer, it shatters…
I'm not a fan of the latch for the slimline organiser. I did notice at Bunnings the two they had available had slightly different "tightness" in the latch. Both were quire hard to open, but one was considerably hard, so may be a very small difference in the manufacturing. If anything definitely test it in store.
Interesting. The price difference is a factor. I just wander when they will be released here in NZ and who will Carry them. Vs the availability of Milwaukee being at pretty much most merchants and the amount of aftermarket accessories available for packout
@@AddictedtoTools Yes Bunnings in NZ does sell toughbuilt pouches. Not the stackTech though. I'm a sparky in NZ and I'm about to purchase the cliptech pouches. Have you purchased any yourself? Would you be up to do a review? They seem like a great product
For the price I don't see the value in not sticking with packout? Sure it might be amazing but as it's new to Markets they're basically asking for Packout prices! The exception being their base kit for ~$500 to suck you into their platform.... Get these bits cheap then everything else is basically the same price as packout
Bought into Packout organisers/compact tool box & crate and NOT full storage boxes inc rolling due to cost. Tool storage in Toughbuilt is better suited for my needs-cheaper & with better options available ie drawers 1 & 3. The TB organisers don't suit my purposes. Best of both worlds.
After my car roll over with my pack out inside and nothing happened to my tools neither to the pack out I’m not buying anything else besides Milwaukee 😂
@@MattChew2 Give it 12-24 months to see what happens, They might be good but with a new product line they seam to be asking alot cash wise for a new to market product that isn't anything new or different. just their version of the same type of product. There is many where I've looked at it and gone for the price and it being a new product to market just buy the packout.
@@MattChew2 go have a look at their balance sheet. They are currently burning cash like crazy and only able to stay afloat through issuing new stock. Pretty hard to do when each raise is massively dilutive to existing shareholders. They have received a delinquency notice and are less than 30 days from being delisted off the nasdaq because they haven’t provided their 2023 and 1Q24 financials. They are so cash poor they have been providing discounts to get paid early but haven’t been paying their suppliers for up to 9 months. Yeah they will be around for a long time…..LOL
wow omg . this guy smashed sledgehummer looks like triple H , but in construction yard beating most stronest than wrestling ring.Your slegehummer test is fake )
Those Sydney Tools prices are criminal!!
Im a GC and on team stacktech. I absolutely love them, so excited for more products to come out soon
Looks like the stack tech latch setup is serviceable. Looks like you can pull off that panel maybe give it a clean out if you need to. Huge plus
Being able to put packout feet on non packout stuff and integrating it means it'll be hard to beat for me.
Yeah I’m wondering who will make something first. I’ve been wanting to try something
Fun fact, if your journeyman drops a 1 1/8th” SDS hammer drill with an 8amp battery off the top of an extension ladder on to the clear lid of a packout organizer, it shatters…
interesting, i wonder how you found this specific info...
Shattered the hammer drill right?
I bet that weighs more than the sledgehammer too.
Great comparison!
Good to see the difference between the online price with packout compared to Sydney/Total Tools!
You mean Tool Kit Depot
Could you test the durability of the detachable handle on the rolling one please
4:01 at this moment he knew he f#@ked up !
😂😂 it’s all still just sitting in a bucket. Need an apprentice to reorganise it
@@AddictedtoTools My apprentice dropped a screw conatiner.....I just got him to sweep them all up and drop the lot in a bin....stuff sorting them out.
Just wondering when the black vessel P1 screw driver is going to be back in stock
But does a toughstack boat go better on the open sea than a packout boat?
It seemed like you dropped the big once empty? Would have been interesting to see with their max rated limit
That’s a fair call. I could put that into my next comparison. Not sure if I’ll use my tools though 😂
I'm not a fan of the latch for the slimline organiser. I did notice at Bunnings the two they had available had slightly different "tightness" in the latch. Both were quire hard to open, but one was considerably hard, so may be a very small difference in the manufacturing. If anything definitely test it in store.
Definitely could be the case but I have found if the inside containers aren’t lined up it will be harder to latch
Interesting. The price difference is a factor. I just wander when they will be released here in NZ and who will Carry them. Vs the availability of Milwaukee being at pretty much most merchants and the amount of aftermarket accessories available for packout
Have you got Bunnings in nz and have you got anyone selling toughbuilt tools and pouches?
@@AddictedtoTools Yes Bunnings in NZ does sell toughbuilt pouches. Not the stackTech though.
I'm a sparky in NZ and I'm about to purchase the cliptech pouches. Have you purchased any yourself? Would you be up to do a review?
They seem like a great product
Bunnings now stock stack tech in Nz. No accessories so far.
Great comparison test👍
For the price I don't see the value in not sticking with packout?
Sure it might be amazing but as it's new to Markets they're basically asking for Packout prices!
The exception being their base kit for ~$500 to suck you into their platform.... Get these bits cheap then everything else is basically the same price as packout
Bought into Packout organisers/compact tool box & crate and NOT full storage boxes inc rolling due to cost. Tool storage in Toughbuilt is better suited for my needs-cheaper & with better options available ie drawers 1 & 3. The TB organisers don't suit my purposes. Best of both worlds.
When is stacktech available in NZ?
Will be from may bunnings
Would rather pay a little more and get the Milwaukee
I love my stacktech, ive beat them to hell, eve ran over one it only scuffed it. I would say they get pretty heavy when full
The pain felt when that opened up. I just hit it with packer up.
😂definately time to packerup
After my car roll over with my pack out inside and nothing happened to my tools neither to the pack out I’m not buying anything else besides Milwaukee 😂
How about buying driving lessons?
@@GeorgeZimmermen I got hit mate 😉
@@KlintonMenezes how about buying better car insurance?
There’s no way this is serious….
Where are each manufactured? People should know
Believe Packout made by Keter in Israel & TB in USA
Correct about the staktech fixing box coming unlocked.... only issue I see so far.
I've had them for a year no issues
This prices are ridiculous 🥴🥴 double what they cost in California
I was holding my breath every time you threw the screw boxes off the ladder 😬
😂same
Like the tough build. But you can’t stack on top of two small organizers. Very silly design. They need to fix that
Everyone wants a rolling drawer box
nah uh 4:01
better have happened on a friday after smoko
Happens every time 😂
In Germany Milwaukee is much cheaper than Toughbuilt.
Dewalt T-stak is the best choice for site work
Toughbuilt unlikely to be around next year at the rate they are going
Whys that?
@@AddictedtoTools company declared bankruptcy a few weeks ago
@@MattChew2 Give it 12-24 months to see what happens, They might be good but with a new product line they seam to be asking alot cash wise for a new to market product that isn't anything new or different. just their version of the same type of product. There is many where I've looked at it and gone for the price and it being a new product to market just buy the packout.
@@MattChew2 go have a look at their balance sheet. They are currently burning cash like crazy and only able to stay afloat through issuing new stock. Pretty hard to do when each raise is massively dilutive to existing shareholders. They have received a delinquency notice and are less than 30 days from being delisted off the nasdaq because they haven’t provided their 2023 and 1Q24 financials.
They are so cash poor they have been providing discounts to get paid early but haven’t been paying their suppliers for up to 9 months.
Yeah they will be around for a long time…..LOL
I hope stack tech holds on with their relationship with Lowe’s or expands with other stores I really do like their products
Jesus the plastic is even getting expensive. I’d rather just use a shopping cart and some milk crates
wow omg . this guy smashed sledgehummer looks like triple H , but in construction yard beating most stronest than wrestling ring.Your slegehummer test is fake )
Hey mate. I can’t fully understand your comment. But I wanted to know how the sledgehammer was fake?
@@AddictedtoTools beating look like Tyson and beating looks like you, child slaps
Зачем пустые кидать? 😂 ты их заполни инструментом
😂