Thanks for such an in-depth guide. It makes me feel confident in buying my first 3D printer that provides adequate prints, with a high potential for mods and upgrades.
Nice review, one point is put the lil short ptfe tube back in it is designed that way so when it retracts it doesn't have to push the filament all the way back through it may also help your ringing issues, my crux 1 doesn't seem to have that problem it also prints great at 60mm sec . Thanks again for the review
woah!this is just a great detailed unboxing and demonstration video. Awesome work bud. Do you by any chance have any beginner tutorial videos for newbies who would want to get into 3D printing ?
Your video helped me a lot! Could you share your cura para pla profile, as I'm having some printing problems. Type: non-stick layers. I'm using the profile, which came on the micro SSD and still didn't stay ten. I hope I was clear.
I’m having a hard time with mine. It starts the print fine , does the base but then disconnects from the print like it’s not connecting to the platform correctly. Pretty sure it’s a leveling issue
There are good videos on RUclips why you want to use a reverse bowden tube for a direct drive to avoid forces your extruder excerpts onto the filament pushing your hotend.
@@JustVlads should make a race video with them all including; leveling, z offset, loading filament, homing, heating, printing, and of course a quality rating at the end of the final print. A lot of them may tie each other but if you use as fast of settings as they're capable of while still giving good results I'm sure it'll really show off what the different printers can really do. Plus it'd make a good video! And you could totally split it up over a few different videos too.
I dont care of quality as much. I just want to experiment with using a 3d printer for printing base shapes for interlocking and sculpting over it with monster clay.
That looks like a creality ender 2 clone. Nothing new it’s a shame the 3d printing world has become stagnant and all manufactures do is copy each other. Also the blue sheet on the bed should always be removed. When the bed gets hit the blue sheet will start to come off and then your magnet sheet is totally useless.
Then you have Flsun doing their delta thing with next to no copycats at all. I mean they have a klipper-ised printer from factory capable of 400mm/s² *from factory*
Thanks for review. Honestly I wouldn't buy it. Tronxy made these builds looooong time ago. I mean some kind of Micro Swiss MK10 clone and stupid cheap single gear extruder which you will want to replace anyway because you will run into its limits sooner than you can say oops. It was inside all older X5 and X5S and looked exactly same. They probably have full warehouses of old parts left :D if i remember tronxy made one small printer X1 with mk8 (same as old ender3) and bowden extruder, it prints better than this. No forward movement or progress, just squeezing the old lemon....
New Channel: www.youtube.com/@Just_Print
Buy it here: geni.us/NjTZdC
Recommended: geni.us/JustVlads
Thanks for such an in-depth guide. It makes me feel confident in buying my first 3D printer that provides adequate prints, with a high potential for mods and upgrades.
Thanks!
Thanks for all the videos you make, haven’t had the chance to buy my own yet but these videos are really helpful
Thank you for such an in depth video. The levelling module definitely helped me dial in everything perfectly.
Nice review, one point is put the lil short ptfe tube back in it is designed that way so when it retracts it doesn't have to push the filament all the way back through it may also help your ringing issues, my crux 1 doesn't seem to have that problem it also prints great at 60mm sec . Thanks again for the review
Very nice, brought it today as my first printer, because it looks small and quality good enough.
how's it working for you?
@@willcubemakes Its good, printed much with it. No issue. TPU/PETG
Just Vlad = the best 3d-printer reviewer :)
great video! i just got one of these machines and your video was stellar! thanks
Would love to see a comparison video between this the Ender 2 and the Kingroon KP3S v3.0.
woah!this is just a great detailed unboxing and demonstration video. Awesome work bud. Do you by any chance have any beginner tutorial videos for newbies who would want to get into 3D printing ?
Bought this one cause of you video . Thanks 😎👍🏻
Your video helped me a lot! Could you share your cura para pla profile, as I'm having some printing problems. Type: non-stick layers. I'm using the profile, which came on the micro SSD and still didn't stay ten. I hope I was clear.
I’m having a hard time with mine. It starts the print fine , does the base but then disconnects from the print like it’s not connecting to the platform correctly. Pretty sure it’s a leveling issue
Dude where do you get your 🔥 AF beats from!! You’re always bringing BANGERS with your B-Roll!!
I use epidemic Sound: www.epidemicsound.com
Can you disable in the menu that noise?
how about cura profile setting ?
Hey do you use pla or pla cf filament?
Nice review. Right in the same range of small build volume printers like the Ender 2 and Kp3s.
To reduce the ringing, you could play around with the acceleration speeds in Cura.
There are good videos on RUclips why you want to use a reverse bowden tube for a direct drive to avoid forces your extruder excerpts onto the filament pushing your hotend.
This is a really good small budget 3D printer shame it's not available for shipping to Saudi Arabia
FYI: The Amazon link says the4 item is not available and no estimation of when it might become available gain.
What kind of file format does this support if i want to import a 3d model from blender.
I wonder why it has the pathologic historic extruder.
It brings only problems.
Hey Vlad, what do you do with all your printers after you review them?
I keep most of them, so i have too many. Maybe i will do a giveaway soon.
@@JustVlads should make a race video with them all including; leveling, z offset, loading filament, homing, heating, printing, and of course a quality rating at the end of the final print. A lot of them may tie each other but if you use as fast of settings as they're capable of while still giving good results I'm sure it'll really show off what the different printers can really do. Plus it'd make a good video! And you could totally split it up over a few different videos too.
I dont care of quality as much. I just want to experiment with using a 3d printer for printing base shapes for interlocking and sculpting over it with monster clay.
Tronxy Crux 1 or kingroon kp3s?
What's the price for that new 3d printer
What is height temp on Nozzle go thank you
How is the first song called? 👀
Could it print metal filaments
Anyone have the issue of the print head crashing into the print after print finishes as it parks , seams like it drifts down when it finishes
Maybe try to change the springs those are not good ones
What would you recommend
@@ronnieramirez2032 they have the yellow springs online just look up 3d printer springs
Its tronxy so I'm surprised it actually works lol 😆
Haha, good one!
@@JustVlads saying that I am a little tempted lol I like the creality version but I only had that for review for a short time
🔥💕👍
Yay airsoft parts!!!
That looks like a creality ender 2 clone. Nothing new it’s a shame the 3d printing world has become stagnant and all manufactures do is copy each other.
Also the blue sheet on the bed should always be removed. When the bed gets hit the blue sheet will start to come off and then your magnet sheet is totally useless.
Then you have Flsun doing their delta thing with next to no copycats at all. I mean they have a klipper-ised printer from factory capable of 400mm/s² *from factory*
Thanks for review. Honestly I wouldn't buy it. Tronxy made these builds looooong time ago. I mean some kind of Micro Swiss MK10 clone and stupid cheap single gear extruder which you will want to replace anyway because you will run into its limits sooner than you can say oops. It was inside all older X5 and X5S and looked exactly same. They probably have full warehouses of old parts left :D if i remember tronxy made one small printer X1 with mk8 (same as old ender3) and bowden extruder, it prints better than this. No forward movement or progress, just squeezing the old lemon....
199 ? ? ? lolololololololololololollllllllllllllllllllll 79? MAYbe. 69? Sure.
How is the first song called? 👀