The racer helmet for Venom's head goes way back! Idk if anyone remembers the Lego Spiderman stop motion series by CustomLegoMinifigure, but he was using the exact same design for his Venom figure 15 years ago! Cool to see it's still kicking
One note on the face, it might be smart to extend the visor a bit around the head so it is a little less noticeable. As well and making the neck a bit more flush.
I'd love to see a video with you talking about what you feel you've learned since first starting with the 3D printer. Your work gets better and better each video!
If you ever revisit this for a Part 3, an idea!: Use an existing LEGO big-fig file & erase the head. Then for upper body, remove an area at the neck where only a LEGO mini-fig can squeeze in (w/ a 2x1 plate at bottom of neck hole, so the mini-fig sticks) Add custom Venom head to mini-fig 👍🏼 For likely gap where inserted mini-fig & 3D printed big-fig meet - custom build a piece for the mini-fig (between head & body; Batman cape “layer” or Boba Fett jet pack “layer”) that act as the traps muscle (trapezius)
An idea for the samurai armor is maybe you could make the skirt out of plastic and do the same water print thing that you did with Eddie and also there is a samurai helmet piece. Nice videos keep up the good work❤
I know a way you can give red hulk ball joint head, get the mixel ball pin, hollow a space in the torso where head would go to fit the ball, but a stud with a hollow top on the bottom of the head and slide it onto the pin
I think you should make the visor of the helmet blend into the helmet more and have the helmet stretch down to the torso more, also the muscular torso looks better than the bionicle one, but overall i love it
Would be really cool if you made the armour kinda like the new capes so you just connect them on the neck withoit taking off the head of the figure underneath
You should make a mask that comes off half way so you can recreate the we are Venom scene(like use the racing helmet joint but make it only half so only half opens)
I would love to see this redone, with the helmet and other chest piece. I know that wouldn’t be long enough for a whole video, so maybe you could make it a diorama with knull which could also add to the runtime.
I really love this custom, man! If you could, could you please consider looking into the Dr Eggman figure from the sonic like, and try fixing him? I feel like his look is super hindered by his head sculpt and his arms and legs not being in accurate proportion to his hagrid style torso
Looks amazing next time you should try to make all the symbiotes that appeared in venom three to put them side by side with venom that will be so awesome
Okay 1 the venom helmet open looks so much cleaner and so does the rest of it Lego needs to make this an official thing but the only thing I would add personally was like on the shoulders and top body is I would add lines of paint to represent the veins he has but this is still really cool plus I’m sure it was a lot of work just to paint it already anyways still looks amzing
To cover the back of the head in the venom try using Cole’s half hood mask that only covers is mouth in ninjago turn it around the part that covers the mouth will cover the back of the neck,and for the pelvis try using Batman’s belt but paint it black these ideas might work
you should make a carnage next even though it would be venom colored red maybe make they taller like 6 bricks high but overall this is a 9.5 out of 10 its nice
Designing a Lego minifigure in one weak is a tuff job, so I would recommend making mini series of figures to reach your full creative pensile. Just give yourself a brake once in a wile.
You could make a Warhammer space marine like this, that would be sick
Make it
Or Power armor from Fallout 4
Yyeeeesss I love Warhammer
That would be awesome
Yes, yes you should make a set of samurai armor.
A snotty wizard hat for me too, please.
Thanks, love you!
You could make the venom mask glass part larger so it covers more of helmet. It would have looked better that way
The racer helmet for Venom's head goes way back! Idk if anyone remembers the Lego Spiderman stop motion series by CustomLegoMinifigure, but he was using the exact same design for his Venom figure 15 years ago! Cool to see it's still kicking
I remember seeing it on an old tutorial video, found it so creative and i still do
looks like the creature from split second
i remember doing it as a kid when i saw his video
9:10 gotta love the classic EDP 🧁
NOOO WAY!!!!! MY COMMENT!!!! I’m so glad I could help!!!!!!
Great idea
The venom armor looks so cool and good idea with that
One note on the face, it might be smart to extend the visor a bit around the head so it is a little less noticeable. As well and making the neck a bit more flush.
I'd love to see a video with you talking about what you feel you've learned since first starting with the 3D printer. Your work gets better and better each video!
It has been 1000 years, thank god ur back
If you ever revisit this for a Part 3, an idea!:
Use an existing LEGO big-fig file & erase the head. Then for upper body, remove an area at the neck where only a LEGO mini-fig can squeeze in (w/ a 2x1 plate at bottom of neck hole, so the mini-fig sticks) Add custom Venom head to mini-fig 👍🏼
For likely gap where inserted mini-fig & 3D printed big-fig meet - custom build a piece for the mini-fig (between head & body; Batman cape “layer” or Boba Fett jet pack “layer”) that act as the traps muscle (trapezius)
For the helmet you should make the teeth more longer yet still fit and the helmet can go halfway up the head to make the eyes less smudged on the face
An idea for the samurai armor is maybe you could make the skirt out of plastic and do the same water print thing that you did with Eddie and also there is a samurai helmet piece. Nice videos keep up the good work❤
samurai armour YES PLZ
I agree
Please make a full samurai armor
Maybe you should mold it with black plastic next time so that the black paint doesn’t scrape off
I know a way you can give red hulk ball joint head, get the mixel ball pin, hollow a space in the torso where head would go to fit the ball, but a stud with a hollow top on the bottom of the head and slide it onto the pin
Lego needs you man
yay so glad to have you back!
I think you should make the visor of the helmet blend into the helmet more and have the helmet stretch down to the torso more, also the muscular torso looks better than the bionicle one, but overall i love it
fun idea. you could make some veiny looking parts. the greyish blue on venom
it would be super cool
I love the destroy the cursed cube
Brooo you can do a symbiotic blade for the arm
you could make an all black head (to solve the hole in the back of the neck) with Venom's tongue instead of eyes
you could fix the front flaps by sloping the attachment leg's feet piece down
You should make a upgraded iron man armor like this venom one
I like this, it's a good way to make Venom bigger than a normal minifig without making him hulk/bigfig size
if you remove all the tendrils and claws, this could make for a great hulk figure
CAN YOU PLEASE MAKE LETHAL COMPANY AND BEETLE JUICE
Yaaaaaaaaaaaaaaaay armor
YES MAKE SAMURAI ARMOR
I wish you would take commissions. Seeing you make these stuff really makes me want to commission Custom Lego minifigures.
I'm in love with the teeth function
The samurai armor might look sick.
Would be really cool if you made the armour kinda like the new capes so you just connect them on the neck withoit taking off the head of the figure underneath
This is super cool and earned a sun from me. Please make Iron Man armour next maybe Mark 42 since it comes apart of Mark 5 🔥❤️🔥❤️🔥
12:21 if you can, you should add gums and white/gray veins
You should make a mask that comes off half way so you can recreate the we are Venom scene(like use the racing helmet joint but make it only half so only half opens)
That Eddie head. Looks like an old grumpy man and venom looks like caseoh trying to get a jawline
actually though🤣
You should make Lego doom slayer with these sculpts.
Im not even kidding just as soon as I saw the “hey friends” bit I subbed I just like the energy ur giving off
Well, if you can make a venom armor, then you can ALSO make a carnage armor!
Pleeeeeeeeeease make a carnage suit😅
You should make it have the hand patches and spider emblem
I would love to see this redone, with the helmet and other chest piece. I know that wouldn’t be long enough for a whole video, so maybe you could make it a diorama with knull which could also add to the runtime.
Please give us the stl, this opens up so many possibilities🙏🙏🙏
You should use some spray paint for larger parts
BRO PLEASE TELL ME YOUR GONNA RELEASE THE MODEL FILES BECAUSE THIS WOULD BE ASWESOME I WOULD LITERALLY PAY FOR THEM!
this is honestly insane
1:44 I got that fig
I'm gonna subscribe that was awesome
I think I’ll like this video
I really love this custom, man! If you could, could you please consider looking into the Dr Eggman figure from the sonic like, and try fixing him? I feel like his look is super hindered by his head sculpt and his arms and legs not being in accurate proportion to his hagrid style torso
Be proud of yourself
nice armor bro about samurai armor maybe a hulk armor but more buffed
Looks amazing next time you should try to make all the symbiotes that appeared in venom three to put them side by side with venom that will be so awesome
The skirt piece reminds me of a oldschool Gundam mobile suit.
Okay 1 the venom helmet open looks so much cleaner and so does the rest of it Lego needs to make this an official thing but the only thing I would add personally was like on the shoulders and top body is I would add lines of paint to represent the veins he has but this is still really cool plus I’m sure it was a lot of work just to paint it already anyways still looks amzing
You have to paint veins just to make it a little more movie accurate
This man needs to work at LEGO
You did it buddy
you should make a costume blue figure in Lego From the movie if
Thanks for shoutouting me 😀
Idea for a next custom minifig: Possibly a Carnage or Toxin(Bren W.) ?
Go on!
I got Black I got white what you want?
You could make something that could go over a minifig Lego like the custom or knock off mark 1 Ironman suit
To cover the back of the head in the venom try using Cole’s half hood mask that only covers is mouth in ninjago turn it around the part that covers the mouth will cover the back of the neck,and for the pelvis try using Batman’s belt but paint it black these ideas might work
U should make a carnage one!
Samurai armour would be so cool
You should add the white veins
Suggestion visor looks kinda weird so you should use the new iron man helmet and make hinges on both sides
You need to add the white spider on his chest and the lines on his hands
this is the design from the movie, not the comic
@@NeckGerlso
@@CohenHarper-rz8wc I couldn't decide which iteration of Venom to make, so I left it as the base model :)
@@GwSpider-Man then he should have painted the white vanes then
@@GwSpider-Manthe movie doesn’t have it, so it wouldn’t make sense
Make a full samurai armor
You should use the astronaut helmet for the venom mask
Oh, can you make a LEGO Siren Head and send it to me and make sure it's a Minifigure and put it in the Venom poly bag too pls?
id say cover up the back of the neck and add wing attachments to the back.
you should make a carnage next even though it would be venom colored red maybe make they taller like 6 bricks high but overall this is a 9.5 out of 10 its nice
Try making doomslayer ( or even better, Doomicorn, From doom eternal!) i think it would be really cool!
Please?
You should do a mini hulk buster suit
Please do fallouts power armour this would work perfectly for it 👌👍
Lego has to make this venom armor
We are venom
We aren’t venom
We are Tom.
u could make like a iron man helmet which can open from the lower half and upper half if u can
could you acutaly make the samuray suite cause that would be nice
You should make a iron man armor!
Next do a bigfig that minifigure fits.
You should make a hulk armour with the parts 😊
Make Scott pilgrim 🙏
What about the spider logo
You should totally make samurai armor and venom needs veins
You should build the big fig venom that's in Lego Marvel the video game
Designing a Lego minifigure in one weak is a tuff job, so I would recommend making mini series of figures to reach your full creative pensile. Just give yourself a brake once in a wile.
You forgot to do the white spider on the middle of the torso
Yea of course make a full samurai armor
Please do the Samuele armor and do a madieval armor too!!
Can you do messy please 🥺🙏❤️
You should round the ends of those flap over the pelvis and on the parts where it’s getting caught on the legs you should round that out too
can you please make a custom plants vs zombie moc?
What about the spider on the stomach
Just wanted to say I love your videos
I’ve been watching since the inside out 2 videos and look forward to a video every week
7:30 Yes