Floating The Bucket
HTML-код
- Опубликовано: 8 сен 2024
- Hey guys! In this short video we show you one of the many ways we use the float function on the loader. It really is a great time saver and very efficient way to work.
Thanks for watching!
Find us on Instagram
foresttofarm
Find us on Facebook
foresttofarm
Just an experienced thought: be careful, even with what you may think is a "passive" position of the loader arms being in FLOAT position, with the bucket curl cylinders fully extended like that - if you encounter a rock, stump, or even just some really hard mounds of dirt/clay, those curl cylinders are at risk as you reverse and pull dirt away from some area. Many cases of bent cylinders have occurred when that obstacle sneaks up. Back dragging with the bucket bottom less vertical reduces the cylinder stresses, and you still move a fair amount of material with each backdrag. Just an FYI...it's a costly oops if you bend a cylinder. Thanks for the info and helping people! 😊
Thanks for the heads up Graham. I was actually watching it earlier and thought it would be a good idea to tilt that bucket just a little. I appreciate your input! Its all a learning process and its no secret we are rookies. :)
Terry
Probably fine if it's just picking up ots own weight. I only allow the curl cylinders to extend out maybe 5 inches on my tractor. Use the weight of the tractor to spread the dirt
Terry so good to see you back, i now have 7.8 acres and i just purchased an Kubota L39 and i am so excited. I am starting to clear my property. Again so good to see you back
Thanks!! Glad to be back. Also congrats on the new property!!! And the new tractor!!
If you care to go to facebook and join our "Kubota B2650 Enthusiasts" group. Anyone can join we just named it that when we bought our tractor. There are lots of good people there to help solve problems plus lots of good posts giving you the heads up on possible issues. People generally answer any questions you may have as well.
facebook.com/groups/1779300572090436/
Terry
We have a 1965 IH 424 with a 6l bucket on it. Originally it only had gravity down, but a few years ago I had it modified to hydraulic up and down with float. I have never fully understood the float function, thanks for the video. I have a slightly better understanding of the float function now. It will just take practice.
Great. It helps once you get the hang of it. I think we have a video showing scoping up dirt with the float function as well. It should be in our "tractor videos" folder.
Terry
I didn't know how to put it in "float mode"
...I do now! THANKS FOR THE INFO!
I'm looking at my tractor and want to try this however it's raining... so I'll wait 😥
Thanks! We are fairly new ourselves but learning fast!
Terry
Good job, Terry as my dear ole dad used to say "where there's a, there's a way". And work smarter not harder.
Thanks! Yeah you just have to jump in there a get it done sometimes.
Terry
@@ForestToFarm Thanks, Terry. It appears 8" are the common "big" size, from my research, and should work.
Great video, thanks!
Welcome & thank you!
So Float Engage, Lets the Boom Raise Float across the ground with only bucket +Arm weight.. What I Realized is With Floating Engaged, you can Still Control the Bucket Curl to control any digging. Correct?
Yes that is the way I see it working.
Terry
Thank you!👍🏽
Your welcome! Glad to help.
Terry
You're back!
Yes and glad to be so!!! Lots more on the way!!
Terry
Nice
We are rookies but trying to learn as we go.
Terry
Love the vids. Just found yall and I've been binge watching them lol. Looking to get the same tractor and yall are proving I am making the right decision. Quick question for you though.. Did you get the tires loaded or does the box blade provide enough ballast for the front end loader?
We love the tractor and it does all we need most of the time. All we have is the box blade and no loaded tires. Most of the time its been doing great however to be honest we moved some dirt in a muddy area near our creek where some beaver are reestablishing a dam. We wanted the beaver pond to be a little deeper. When the bucket was full of very moist dirt and we were down hill with the bucket in the hole it would spin the rear tires some of the time. We were able to get out but I suspect if those rear tires were loaded we would not have had as much trouble. Either way we want it light when on lawns so no loaded tires for us. I have considered buying or making some wheel weights.
Thanks so much for watching!! Stick around its fixing to get busy around the farm/homestead. We should be posting for many years to come.
Terry
Can you tell me how to turn the float function on? I don't feel like my 2013 kubota has it. If I push up on the lever like you did it's just gonna pick the tractor up. I do have a grapple attachment so the lever is a little different. I wish I could attach pictures
I wish I could help you but I am just not sure. You do have to give the lever a good solid push to engage it.
Terry
Do you ever get the teeth stuck on a rock? I find I can’t back drag with my bucket that far down because I’m always snagging something, even in float.
So far no but there is always that first time! Check Graham Sheas comment. He addresses this issue. Tilt that bucket to a more level angle. It may take and extra pass or two but probably worth the effort over damaging your loader arms or cylinders. Its all a learning process.
Terry
When I press forward my bucket pushes up my cab
Assuming you actually have a float function, are you sure you are pushing it all the way forward? Beyond a discernible stop? On ours you feel that “wall”.
Terry
Or you could turn around and use your box blade
People were asking how to float a loader bucket so we decided to show them what we knew about it.
Terry
Gotcha first-time tractor owner question
@@benjybaldwin773 Lots to learn for sure.
Terry
Its hard to imagine a person with a tractor and front end loader doesn't know how to do this.
You would be surprised at how many ask about it. Lots of new tractor owners out there I guess. Gotta start somewhere. :)
Terry
We are learning quickly!! Thanks Forest To Farm!!