12:25 Pro gamer move that you can do to have a smooth collar after folding it is to add few ( around 4, 2 for each side of the line that you were folding on) internal lines there. Internal lines affects topology, so triangles will be so small that the folding there will look very smooth!!
Thanks for sharing this tip! You can also remove a property on internal lines called Folder Rendering that eliminated a hard line on folded internals - And extra pro-tip is to change those folded pieces to quad mesh. To do this select the piece and in the property editor at the very bottom you will fine miscellaneous. Open that area and you can change piece mesh to Quad. This makes folded areas look very smooth. And of course lowering the particle distance. Hope that adds to your knowledge!
what do you mean? are you add more lines around the fold line and make it likewise a fold line? could you explain more? I highly appreciate your sharing, Thank you!
@@PINK_DESIGNER ruclips.net/video/zJ5ScFyqNuA/видео.html There you go pal, he explains everything very clearly ^^ (go watch his other videos on MArvelou Designer/ Clo3D)
Great tutorial, thank you. Was really helpful having the additional practice files to test out the new skills on at the end of the tutorial, helped embed the learning. When you have to have to do it completely on your own is when the learning really goes in!
Hello CLO, I am so excited about Part 3 of the series and this first lesson was great! I've encountered 2 problems and would so appreciate your help: 1. When I folded the collar and cuffs, they remained grey, even when I clicked away with the Select Tool. How do I make them return to white? 2. At timestamp 27:57 using the Pleats Sewing Tool, the sewing is mirrored on the back but not on the yoke. When I try to apply sewing there is an error message "overlapping sewing line." Is there a work around for this?
Hello Sarah. When using the fold tool, the garment defaults to Textured Surface. If you switch tools and it is STILL grey, change to Thick Textured Surface in the 3D Toggle Menu > Garment Rendering. The video itself is only 27:50... I cannot check what you mentioned. I will say "Overlapping Sewing Line" means there is already a seam line in that place.
@@CLO3D thank you for this prompt response. I will follow those steps you outlined. Please look at timestamp 25:30 to clarify the second part of the question.
Hi Forerd. You need to switch your 3D Toggle fabric view from Textured Surface to Thick Textured Surface. This is also covered in the very first video of the beginner series ruclips.net/video/zYL3Im5XFHA/видео.html at the 9:10 mark
Thank you very much for this video! Tell me please, ?when i fold fabric and simulate it, the fabric is falling down, not staying like in video. What can i do that it will not fall down? I'll be glad for an answer.
Hello, I'm wondering if the reason I don't have the gizmo feature is because I'm using a free trial version that's limited, or is it because I don't know how to use it?
Hi. The Free trial is the exact same as the paid. How are you trying to activate the gizmo? What are the exact steps you are taking? It should be a simple Left click in the 3D window with simulation off
how can you add folds that are not at the edge of the fabric? for example I want to add tucks to the waist, like only right at the middle not at the beginning nor at the end of a pattern piece? so in real life you fold the fabric and sew at the desired width of the fold and press to one side. how can I mimic that in clo?
Hi. Yes you can Add Internal Lines and then fold and sew them closed. Tis video goes over that. and there are a few others we can link below ruclips.net/video/i_o76Q-BMdA/видео.html ruclips.net/video/KzPtktPAOrU/видео.html
@@Ken-c7c I am assuming you mean the pleats at the very beginning. If you follow the video you will see that they stay standing because on the folds like if you fold/accordian a piece of paper
I started a new garment. No avatar. Added a 27x90 rectangle. Click the two sides and distributed 9 internal lines between segments. Selected lines 1, 3, 5, 7, and 9, and in property editor set fold angle to 0 and fold rendering to ON. Selected the even lines and set fold angle to 360 and fold rendering to ON. Strengthened the fabric. With normal simulate the fabric falls to the ground. What am I doing wrong?
@@Ken-c7c Is the fabric placed on the floor pre simulation? Also you may find it easier for help questions to join our Discord or Community forums so you can add images instead of typing everythign out :)
Hello! I can´t find the ¨fold¨ option inside the ¨property editor¨ file. I do not have the same options as you do. My CLO version is 6.2. Why does that happen? How can i fix it?
If you are not seeing all the tools you may need to UNGROUP them in User Settings. Fold can be applied in the Property Editor to an Internal Line OR if you select a Sewing SeamLinePairGroup with Edit Sewing.
hello. I don't understand why you change "custom angle" to "turned" in property editor after sewing together small pieces of pleat on the back detail of a shirt. I checked the video called "sewing" where you use "turned" for collar and I can see how the look of a collar changes during the proccess. But I don't see any difference when I turn on "turned" for the pleat on a chirt. Why do we do that?
Hello. I assume you are speaking about the sewing at approx 17.25. Turned seams will help the pattern lie flat. There is an example here. support.clo3d.com/hc/en-us/articles/115000496627--Property-Sewing-Line-Type
Hey kann mir jemand helfen und zwar bekomm ich die Knopfleiste nixht in den Kragen in der vorderen Mitte. Sie hat es schon fertig aber wie macht man das??😊
Hi. Have you already watched all the videos earlier in the series? If you have not we first recommend that. Then for this We recommend watching the video in small parts and pausing as you go so you can follow each individual step
This is a result of being on Thick Textured Surface - In the corner of the 3D window there is a small vertical menu, in fabric rolls area you will find Thick Textured Surface . Make sure to be on the thick version because the other version is the thin view (Textured Surface) with grey background as you are seeing.
Hi, at the back yoke pleat, when I sew all the pleated piece to the back yoke piece, I get small triangle like pieces showing the back of the fabric. Anyone knows why this is? I tried several times to eliminate this but could not.
When you select a piece of fabric look in the Property Editor and you will want to Check the box next to double sided. you can find this below Curved Side geometry and above Simulation properties. it wont show that it is double sided unless you render or check Thick Texture Surface in your 3d window settings. Hope this helps.
This is a result of being on Thick Textured Surface - In the corner of the 3D window there is a small vertical menu, in fabric rolls area you will find Thick Textured Surface . Make sure to be on the thick version because the other version is the thin view (Textured Surface) with grey background as you are seeing.
When i tried to sew the right of the pleat to the upper pattern an error occurs. Bc it looks like it is overlapping. And in the video as well, there is no sewing in right pattern.
actually I worked it out, it's becasue of the symetric sewing, it has sewed the top of the folds of the pleat together on both left and right of the back panels when you make the first pleat sewing, but not both to the yoke. Guess you would have to remove the linked editing to make the second pleat sewing work.
Hey, I was trying out the practice files given in the description box (which is - women's collared dress) and I'm facing some issue while tying to make the pleat using pleat sewing tool. It is not grouping the segments or pleats together for joining. Can any one tell me where I'm going wrong?
Check the answer? Meaning do you want someone to review your file? You could ask in the support forums to see if a user would be willing to help. support.clo3d.com/hc/en-us
12:25 Pro gamer move that you can do to have a smooth collar after folding it is to add few ( around 4, 2 for each side of the line that you were folding on) internal lines there. Internal lines affects topology, so triangles will be so small that the folding there will look very smooth!!
Thanks for sharing this tip! You can also remove a property on internal lines called Folder Rendering that eliminated a hard line on folded internals - And extra pro-tip is to change those folded pieces to quad mesh. To do this select the piece and in the property editor at the very bottom you will fine miscellaneous. Open that area and you can change piece mesh to Quad. This makes folded areas look very smooth. And of course lowering the particle distance. Hope that adds to your knowledge!
You mean me ^^? Here's my mail: przemyslaw.wiktorek95@gmail.com
what do you mean? are you add more lines around the fold line and make it likewise a fold line? could you explain more? I highly appreciate your sharing, Thank you!
@@PINK_DESIGNER ruclips.net/video/zJ5ScFyqNuA/видео.html
There you go pal, he explains everything very clearly ^^ (go watch his other videos on MArvelou Designer/ Clo3D)
Great tutorial, thank you. Was really helpful having the additional practice files to test out the new skills on at the end of the tutorial, helped embed the learning. When you have to have to do it completely on your own is when the learning really goes in!
Glad to hear.
This is really so nice of you❤
Hello CLO, I am so excited about Part 3 of the series and this first lesson was great! I've encountered 2 problems and would so appreciate your help:
1. When I folded the collar and cuffs, they remained grey, even when I clicked away with the Select Tool. How do I make them return to white?
2. At timestamp 27:57 using the Pleats Sewing Tool, the sewing is mirrored on the back but not on the yoke. When I try to apply sewing there is an error message "overlapping sewing line." Is there a work around for this?
Hello Sarah. When using the fold tool, the garment defaults to Textured Surface. If you switch tools and it is STILL grey, change to Thick Textured Surface in the 3D Toggle Menu > Garment Rendering. The video itself is only 27:50... I cannot check what you mentioned. I will say "Overlapping Sewing Line" means there is already a seam line in that place.
@@CLO3D thank you for this prompt response. I will follow those steps you outlined. Please look at timestamp 25:30 to clarify the second part of the question.
This means you have overlapping sewing. So you likely need to delete some existing sewing
Hi, 9:36 fabric is still black( How it can be fixed ?
Hi Forerd. You need to switch your 3D Toggle fabric view from Textured Surface to Thick Textured Surface. This is also covered in the very first video of the beginner series ruclips.net/video/zYL3Im5XFHA/видео.html at the 9:10 mark
@@CLO3D thank you)))
Thank you very much for this video! Tell me please, ?when i fold fabric and simulate it, the fabric is falling down, not staying like in video. What can i do that it will not fall down? I'll be glad for an answer.
Hi There. Could you please share with us which of the 4 practice files are you working in when this happens? Also, what time in the video?
@@CLO3D I'm working with fold angels and it happen in 4:50 mins in video, when she is simulating
Hello, I'm wondering if the reason I don't have the gizmo feature is because I'm using a free trial version that's limited, or is it because I don't know how to use it?
Hi. The Free trial is the exact same as the paid.
How are you trying to activate the gizmo? What are the exact steps you are taking?
It should be a simple Left click in the 3D window with simulation off
how can you add folds that are not at the edge of the fabric? for example I want to add tucks to the waist, like only right at the middle not at the beginning nor at the end of a pattern piece? so in real life you fold the fabric and sew at the desired width of the fold and press to one side. how can I mimic that in clo?
Hi. Yes you can Add Internal Lines and then fold and sew them closed. Tis video goes over that. and there are a few others we can link below
ruclips.net/video/i_o76Q-BMdA/видео.html
ruclips.net/video/KzPtktPAOrU/видео.html
It seems to me that you have not finished to sew the fold on the right side yoke, a small segment. 26.00-
Noted
Hi, do you know why my collar changed into grey after I fold it?
try "flip normal"
Turn on the Thick Textured Surface in the 3D Toggle Menu
I can't find the gizmo for the 2024 version. Can you help me find where it is?
Hi. The gizmo is still available just like before. It will appear when you click on an item in the 3D window.
how is the fabric in the 3 d window not falling to the ground?
For the pleats section at the very beginning?
What is the time stamp that explains how this is done?
@@Ken-c7c I am assuming you mean the pleats at the very beginning. If you follow the video you will see that they stay standing because on the folds like if you fold/accordian a piece of paper
I started a new garment. No avatar. Added a 27x90 rectangle. Click the two sides and distributed 9 internal lines between segments. Selected lines 1, 3, 5, 7, and 9, and in property editor set fold angle to 0 and fold rendering to ON. Selected the even lines and set fold angle to 360 and fold rendering to ON. Strengthened the fabric. With normal simulate the fabric falls to the ground. What am I doing wrong?
@@Ken-c7c Is the fabric placed on the floor pre simulation?
Also you may find it easier for help questions to join our Discord or Community forums so you can add images instead of typing everythign out :)
Hello! I can´t find the ¨fold¨ option inside the ¨property editor¨ file. I do not have the same options as you do. My CLO version is 6.2. Why does that happen? How can i fix it?
If you are not seeing all the tools you may need to UNGROUP them in User Settings. Fold can be applied in the Property Editor to an Internal Line OR if you select a Sewing SeamLinePairGroup with Edit Sewing.
hello. I don't understand why you change "custom angle" to "turned" in property editor after sewing together small pieces of pleat on the back detail of a shirt. I checked the video called "sewing" where you use "turned" for collar and I can see how the look of a collar changes during the proccess. But I don't see any difference when I turn on "turned" for the pleat on a chirt. Why do we do that?
Hello. I assume you are speaking about the sewing at approx 17.25. Turned seams will help the pattern lie flat. There is an example here. support.clo3d.com/hc/en-us/articles/115000496627--Property-Sewing-Line-Type
My collar unfolds when rendering regardless of particle distance, any ideas?
Did you use the internal line and fold arrangement tool? Which fabric is being used? Something that is soft?
@@CLO3D solved, the collar fold was straight instead of curved
Hey kann mir jemand helfen und zwar bekomm ich die Knopfleiste nixht in den Kragen in der vorderen Mitte. Sie hat es schon fertig aber wie macht man das??😊
Hi. Have you already watched all the videos earlier in the series? If you have not we first recommend that. Then for this We recommend watching the video in small parts and pausing as you go so you can follow each individual step
Hi there, same question as Alexandre Jouniot. How did you make the collar white in spite of grey once it's folded please?
This is a result of being on Thick Textured Surface - In the corner of the 3D window there is a small vertical menu, in fabric rolls area you will find Thick Textured Surface . Make sure to be on the thick version because the other version is the thin view (Textured Surface) with grey background as you are seeing.
Amazing how you explained! thanks so much!
How can I change the size of my font when I click on some line to measure it for example?
Go to Settings Menu--> User Settings--> User Interface--> Appearance. Increase "Line Length Size"
@@CLO3D Thanks
Fantastic explanation!
Can you please explain how to put Arrow in the pleat part and circle in back pattern piece. What is the use of it.
support.clo3d.com/hc/en-us/articles/115014763827-Create-Pattern-Symbols
Hi, at the back yoke pleat, when I sew all the pleated piece to the back yoke piece, I get small triangle like pieces showing the back of the fabric. Anyone knows why this is? I tried several times to eliminate this but could not.
Try using the Hi Res Garment Tool. Often when the Particle Distance is at the default (20), you can get artifacts where there are small folds/details.
Please do a tutorial on how to do one-sided diagonal pleats on a skirt!
you might want to check our user forums; support.clo3d.com/hc/en-us
how do u use the pleat tool?
Here is a link to the manual on using the Pleat Tool. support.clo3d.com/hc/en-us/articles/115013214147-Adding-Pleats-Knife-Pleats
The pleats fold box didn't open qhen I double clicked. Could you help me?!
Did you add internal Lines first? If there are no Internal (Red) lines added CLO has nothing to fold
@@CLO3DYes, it was that! Thank you!
how to make a fold of the pleat closer to the main fabric, that it does not stick out.
Try selecting the internal line that is folded; then check in the property editor and edit the fold angle.
how did you make the collar as double side
When you select a piece of fabric look in the Property Editor and you will want to Check the box next to double sided. you can find this below Curved Side geometry and above Simulation properties.
it wont show that it is double sided unless you render or check Thick Texture Surface in your 3d window settings.
Hope this helps.
This is a result of being on Thick Textured Surface - In the corner of the 3D window there is a small vertical menu, in fabric rolls area you will find Thick Textured Surface . Make sure to be on the thick version because the other version is the thin view (Textured Surface) with grey background as you are seeing.
Hi, I can not download treining files.
Hi. Thank you for letting us know. We have reached out to our CONNECT team to let them know and we hope to have them updated soon
When i tried to sew the right of the pleat to the upper pattern an error occurs. Bc it looks like it is overlapping. And in the video as well, there is no sewing in right pattern.
Sorry for the late reply. Were you able to sort this out?
@@CLO3D hi Can't sew right of the pleat to the upper pattern also. could you please advise?
@@피어나로스타 We need more of an explanation of what is happening. Are you getting an error? At what point are you having difficulty.
@@CLO3D I've tried this also and am stuck with an overlapping sewing line error.
actually I worked it out, it's becasue of the symetric sewing, it has sewed the top of the folds of the pleat together on both left and right of the back panels when you make the first pleat sewing, but not both to the yoke. Guess you would have to remove the linked editing to make the second pleat sewing work.
Hey, I was trying out the practice files given in the description box (which is - women's collared dress) and I'm facing some issue while tying to make the pleat using pleat sewing tool. It is not grouping the segments or pleats together for joining. Can any one tell me where I'm going wrong?
Sorry for the late reply. Were you able to solve this issue?
🙌🏻🙌🏻🙌🏻
Nice tutorial，How did you drew the arrow of the shirt？
The Arrows on the back were done in the CAD Pattern Program. You CAN draw reference arrows using the Baseline Polygon Tools as well.
Once I fold a cuff, I usually do top stitching. How can I do it in CLO? Tanks
ruclips.net/video/ZncCv3ijsZM/видео.html
Thanks for the tutorial! Is there anywhere to check the answer? because I am not sure if Im doing correct for the women skirt practice 😂
Check the answer? Meaning do you want someone to review your file? You could ask in the support forums to see if a user would be willing to help. support.clo3d.com/hc/en-us
@@CLO3D yes thank you❤️
This is great. Thank you!
You're very welcome!
that's good but how to easily attached cuff button?
This video may help you with a button cuff process
ruclips.net/video/wUNoiWDYaxg/видео.html
Thanks for sharing the file, very usefull as reference
Glad it was helpful!
22:05 when I double click the arrow dissapears
It is because I hadn’t traced the baselines yet
it's great videos, but the worst part is that everything is in inch, and that makes it very difficult for someone who uses mm or cm...
You can change the measurement options in User Settings
S il vous faire nous,des vidéos en français
Ils arrivent bientôt
Triangles are pointy
Yes, they are. Do you have a question?
this interface is too stressful
We are sorry you feel that way. Did you begin the series from Part 1 Lesson 1; it goes over the workspace layout options.