@@CLO3D Yes, make the garment in another software that has SubD capabilities (like Blender or Rhino or the daz Hexagon) and import (add) this garment into Clo as avatar ant flatten the individual parts and delete this avatar. I can make any kind of clothing using this technique.
I have problems finishing a line with multiple segment points. Double clicking only works 1 out of 10 times and also pressing the enter key only worked once. I'm on windows 10 using a 3 button mouse. Any suggestions? Many thanks!
Had trouble finishing a line. Double click sometimes did not finish line. Are there any tips on this? A bit random that sometimes it does it and sometimes not. Love the tutorials by the way. Julie
Hi and thank you so much for these helpful tutorials. I have a problem with selecting flatten for particles. Flatten does not select. It used to work but after some editing it does not select that same particle but just select other new particles which I make. :(
Hey guys I’m really interested in purchasing Clo3d to bring some of the designs I have in my mind to life. I’m wondering if I should learn flat patternmaking first of if should just learn as I go with CLO. Do you think it’s possible to teach myself on CLO? Any suggestions would be greatly appreciated.
Hi there. Im having trouble using the edit 3d pen (Avatar) after I have created my line(s). I can select the line and right click to bring up "delete, add point, add curve point", however I am unable to move an existing point or line - its like the line is just frozen. The first time I trie this I was able to do it some of the time but not all, and today it isn't letting me do it at all.
HI. When you go to move a point make sure that you only have a Segment Point highlighted/selected. You should not have any segment lines selected when moving the point
Hi, I have one pattern that doesn't flatten. It doesnt show blue when I hover over it and I've tried editing it over and over again. It's closed everywhere but still doesn't show blue and yellow to let me flatten it. Any tips?
Hi thank you so much for sharing this tutorial. I am learning so much and it so useful! I am wondering if there is a other way to closed up 3d pen avatar function instead of double clicking? I tried several time but it doesn't closed up for me or am I doing it something wrong?
There is no other way to end the line. What might be happening is you end but accidentally click a third time which begins a new pen mark. When you accidentally begin a pen mark you can hit ESCAPE to get out of the tool.
@@CLO3D I am facing the same issue. When I drop multiple points and try to end it at last, as you did for the front part of the avatar, I face it but when I draw a single line as you did for the back, I don't.
when I try to make a straight legging edge it won't snap to the guide lines even when I hold shift to do it (I also have to hold control to navigate around the ankle in order to complete the circle. to try and fix that I tried selecting all the sections of the circle and 'flatten as straight line', but it still didn't snap to the guideline, do you have any suggestions?
tried to select to area to be flattened but it won't select, I don't think I have any gaps in the lines (does that make the program think that the shape isn't complete or something like that)
t sounds like you are doing all the right things. The Flattening Technique should be thought of as a way to quickly start your garment. To fully realize the patterns you should definitely to some editing post Flattening in the 2D window.
If you cannot select it then it is either not a closed shape or the shape wraps around the body/limb too much. Try adding in a seam to flatten then merging after.
@@CLO3D can you give me a tutorial link for that? I don't really understand what you're saying with adding a seam flatten and merge after. how are other people making leggings or tight long sleeve tops? everyone else is surely having to navigate tight circles around wrists and ankles?
Hello, please help me with a query when I use the tool to draw underwire the lines go straight and not curve, is there any shortcut key or something you use while drafting the pattern?
Hi Clo! loving this software and thank you for the video. How did you remove the skin? I cannot find the video that shows how and cannot find the menu for it. thank you
Hi. Do you mean to remove the texture (skin) from the avatar? If that is it just double click on the avatar then go over to the Property Editor. You can go to Texture and delete the Avatars textures by click on the trash can
I'm getting a 'Failed to flatten some patterns' message on 2 of 8 pieces, although the pieces are highlighted yellow, just like the ones that do flatten. Why is that?
That happens if the pieces don't have enough areas broken up by segments to make seams. For example; if you make a bodice and don't draw the shoulder seam AND the side seam, the wrapping type of pattern cannot be extracted (would not be possible in real life either). There needs to be enough realistic seams for it to work. Occasionally you have enough seams and get this message still and might have to delete and re-draw one or all sections.
@@CLO3D Hello, thanks for the great tutorials and I have learnt a lot. I am also getting the 'Failed to flatten some patterns' error. When this happens I just 'ctrl+z' and go back to 3d window to adjust the patterns, however this creates another issue as the extracted patterns are not sewn together. How may I solve this?
@@leijiao4725 There are a few best practices to follow; draw on the Avatar with as few points as possible. Add points where you know other pattern pieces will start/intersect and try to always start at an existing point if drawing more than one pattern piece.
23:27 how can I go back to the assembled status after I flattened the patterns? Even if I undo (ctrl+z) it, I couldn't go back. The 'undo' command doesn't work only at this situation.
Hi Jordan. You may want to check your settings. By default only the Space Bar should turn Simulation on. If you go to Settings > User Settings > Shortcuts > The Simulation is under 3D Garment. Make sure that it is set to "Space"
Hello. thank you very much for the tutorial. I have a problem with edit 3d pen (avatar) tool editing the initial shape with bug chunks. In contrast, in video you can make subtle changes via edit 3d tool. What can be the reason?
The key to success with the 3D Pen Avatar is to create pattern pieces similar to real-world patterns. There is more information here and you can also search for other help as well. support.clo3d.com/hc/en-us/articles/115012223847-Flatten
Hello, I’m new to this software. I have seen from the demonstration video of making a dress on the homepage of your website, where you can change the length of the sleeves and the dress, change the circumference of the sleeves and the dress using the cursor at will from the 3D view. But I can’t find a way to do that in this software. Can you help me to find it?
there is something weird with the back panel, it didn’t allow me to do most of the things the instructor was saying… I followed step by step and double checked everything and followed exactly but the exercise file just did not work, looking at the other comments people are facing the same issue, please fix this thank you so much.
At 33:48 mark there are guides that appear on the avatar when she's using the 3D pen tool, is there a way to make these guides appear? I think i missed this part if she did mention it during the video.
You have to draw and flatten the patterns all at once; this will sew the patterns together. IF you only do half, you can unfold or make a symmetric copy and sew the center seams.
Hello can you please explain how you got your tool layout across the top like that. I been trying for days since I started using MD to do that without having to long press and click to no avail
-Hi Jose. Depending on your set up the tool may be hidden/stacked under another tool. If you have Group Tools tuned on the tool is under. If you Click and Hold the 3D Pen (Avatar) tool you will see a drop down appear to select flattening. -You can tell if Tools are stacked by there being a small Grey triangle in the lower right corner of the tool button -Group tools can be turned on/off under Settings > User Settings > User Interface > Mode & Toolbar. So if you have a larger screen/monitor you can ungroup the tools. But if your screen is smaller it is recommended to keep the tools grouped
Hello! Thanks CLO for this video, i have a question about curve line, how to make it? because i'm doing step by step as she is saying and i can't make it ((( i have the last version
Hi There. We have a video from our Beginners Guide to CLO that covers each of the Curvature Tools and how they are used here ruclips.net/video/2txgDjHsXIc/видео.html
Each segment corresponds to a point you added while using the 3D Pen Avatar - The fewer the points, the fewer the segments. You can either delete the segments you do not need or Right Click and convert them to a Curve Point.
This isn't an edit, it is more an explanation of why the pattern piece appears to have flat sections and it shows the difference between a Low Res pattern piece & a High Res pattern piece.
I have CLO 5.2 latest update since 5/25/20. When I press enter to flatten, it freezes the software 7 times out of 10. It also freezes my entire computer once every 3 or 4 days and I have to hard boot the entire PC. My system is a an Alienware Aurora Ryzen Edition, Ryzen 9 3900 12-Core. 3.09 Ghz. 32gb system ram. Windows 10 Home Edition with all latest updates. Nvidia Geforce RTX 2080 Ti - 11gb ram.
Hello -So sorry this is happening. Have you checked to upgrade to the most recent NVIDIA card drivers? The other action you wan to go through is making sure CLO is actually running off the NVIDIA Card. aps2.toshiba-tro.de/kb0/TSB5603RN0000R01.htm NVidea Graphic card drivers download location: www.nvidia.com/Download/index.aspx Your specs are good and hopefully the above actions fix this :)
@@CLO3D I already have the latest Nvidia driver. That instruction that you link to is for Windows 7. I'm running Windows 10. None of the information in the link matches what is in Windows 10. If I right click on Geforce Experience, it doesn't show, "Run with Graphics processor" at all. If I open Nvidia Control Panel, "Select preferred graphics processor" is not available. The only thing I was able to do was to add CLO 3D to the list of programs in the Nvidia Control Panel. It was not there initially. Is that enough? I did not change any of it's default settings after I added it.
The process is similar between 7 and 10 for this action, but yes all you have to do is add CLO to the list of programs and choose apply. You don' have to change any settings in CLO. If CLO was not in this list this may be why it was crashing often. Below is a video demo specific to 10, but sounds like you already successfully switched it. www.google.com/search?q=how+to+set+a+graphics+card+as+default+on+windows+10&rlz=1C1CHBF_enUS848US848&oq=how+to+set+a+graphics+card+as+default+on+windows+10&aqs=chrome..69i57j0l4j69i64l3.11200j0j7&sourceid=chrome&ie=UTF-8#kpvalbx=_fpvOXseFCMWltQbbp4iIAw30 If you continue to have major problems you can email support@clo3d.com for more help.
Sorry you are having difficulties. If you get the crash dialogue box, please enter the steps of what you were doing at the time of the crash. If you do not get that option, please create a detailed post here; support.clo3d.com/hc/en-us/community/topics/115000546428-Product-Feedback
It is best to create closed pattern shapes that resemble real world patterns. The flattening technique cannot create pattern shapes that encircle a part of the body, as an example.
You can either hide in by clicking the Avatar skin icon in the 3D Vertical Toggle menu or if you click on a part of the avatar, you will see the texture in the property editor... use the delete icon to the right to remove
Hi, I am pressing enter and nothing is appearing in my 2d window. I have tried everything I know but cannot seam to figure it. any help would be great!!!
3Dpen should definetly be improved and have better vector features. Way too hard to control. And regarding the bustier, what ever had to be ajusted on the property editor, was too fast which means uclear. Maybe something more step by step would be nice.
The tool has made lots of updates since first released, but does take some practice to get used to. And updates are always coming. Make sure you are on the latest version when using. and thank you for your feedback
We are working on making sure our videos can be enjoyed by everyone. We apologize for this inconvenience are working to rectify. Thank you for your patience.
This tutorial was so much fun! Loved using the avatar as a virtual dress form to "drape" a garment
Revolutionary way to make sewing patterns!
There is an way of make a cloth that is not close to body in 3d and flatten it, like a skirt or a trouser?
Sorry for the late reply, were you able to solve your issue?
@@CLO3D Yes, make the garment in another software that has SubD capabilities (like Blender or Rhino or the daz Hexagon) and import (add) this garment into Clo as avatar ant flatten the individual parts and delete this avatar. I can make any kind of clothing using this technique.
@@jeorane Ok... do you need help with CLO?
@@CLO3D Thanks, no I don't. Please, keep making these good tutorials
@@jeorane thats actually kinda brilliant.
I have problems finishing a line with multiple segment points. Double clicking only works 1 out of 10 times and also pressing the enter key only worked once. I'm on windows 10 using a 3 button mouse. Any suggestions? Many thanks!
Sorry for the late reply. Were you able to get an answer to your question?
Had trouble finishing a line. Double click sometimes did not finish line. Are there any tips on this? A bit random that sometimes it does it and sometimes not.
Love the tutorials by the way.
Julie
same problem
Sorry for the late reply. Were you able to solve your issue.
@@CLO3D no
Hi and thank you so much for these helpful tutorials.
I have a problem with selecting flatten for particles. Flatten does not select. It used to work but after some editing it does not select that same particle but just select other new particles which I make. :(
it doesnt work .
Sorry for the late response. Were you able to solve your issue?
👍❤
Hey guys I’m really interested in purchasing Clo3d to bring some of the designs I have in my mind to life. I’m wondering if I should learn flat patternmaking first of if should just learn as I go with CLO. Do you think it’s possible to teach myself on CLO? Any suggestions would be greatly appreciated.
It is possible to teach yourself. There are plenty of resources in our channel here.
Hi there. Im having trouble using the edit 3d pen (Avatar) after I have created my line(s). I can select the line and right click to bring up "delete, add point, add curve point", however I am unable to move an existing point or line - its like the line is just frozen. The first time I trie this I was able to do it some of the time but not all, and today it isn't letting me do it at all.
HI. When you go to move a point make sure that you only have a Segment Point highlighted/selected. You should not have any segment lines selected when moving the point
Does the underwire (just a frozen pattern) work with motion files and animation rendering? Or is it only for the use of building the bra patterns?
The underwire will not move when motion is added. Try using Trim Hardware fabric and adding "Solidify" from the Right-Click contextual menu.
Hi, I have one pattern that doesn't flatten. It doesnt show blue when I hover over it and I've tried editing it over and over again. It's closed everywhere but still doesn't show blue and yellow to let me flatten it. Any tips?
Hi. The pattern piece may be too large. It can help to add an extra internal Line and then merge the two patterns together after
Hi thank you so much for sharing this tutorial. I am learning so much and it so useful! I am wondering if there is a other way to closed up 3d pen avatar function instead of double clicking? I tried several time but it doesn't closed up for me or am I doing it something wrong?
There is no other way to end the line. What might be happening is you end but accidentally click a third time which begins a new pen mark. When you accidentally begin a pen mark you can hit ESCAPE to get out of the tool.
@@CLO3D I am facing the same issue. When I drop multiple points and try to end it at last, as you did for the front part of the avatar, I face it but when I draw a single line as you did for the back, I don't.
when I try to make a straight legging edge it won't snap to the guide lines even when I hold shift to do it (I also have to hold control to navigate around the ankle in order to complete the circle. to try and fix that I tried selecting all the sections of the circle and 'flatten as straight line', but it still didn't snap to the guideline, do you have any suggestions?
tried to select to area to be flattened but it won't select, I don't think I have any gaps in the lines (does that make the program think that the shape isn't complete or something like that)
t sounds like you are doing all the right things. The Flattening Technique should be thought of as a way to quickly start your garment. To fully realize the patterns you should definitely to some editing post Flattening in the 2D window.
If you cannot select it then it is either not a closed shape or the shape wraps around the body/limb too much. Try adding in a seam to flatten then merging after.
@@CLO3D can you give me a tutorial link for that? I don't really understand what you're saying with adding a seam flatten and merge after. how are other people making leggings or tight long sleeve tops? everyone else is surely having to navigate tight circles around wrists and ankles?
Hello, please help me with a query when I use the tool to draw underwire the lines go straight and not curve, is there any shortcut key or something you use while drafting the pattern?
If you are using the Polygon Tool, Click & Drag and you will get curves with bezier handles.
Hi Clo! loving this software and thank you for the video. How did you remove the skin? I cannot find the video that shows how and cannot find the menu for it. thank you
Hi. Do you mean to remove the texture (skin) from the avatar? If that is it just double click on the avatar then go over to the Property Editor. You can go to Texture and delete the Avatars textures by click on the trash can
@@CLO3D yes thank you very much
I'm getting a 'Failed to flatten some patterns' message on 2 of 8 pieces, although the pieces are highlighted yellow, just like the ones that do flatten. Why is that?
That happens if the pieces don't have enough areas broken up by segments to make seams. For example; if you make a bodice and don't draw the shoulder seam AND the side seam, the wrapping type of pattern cannot be extracted (would not be possible in real life either). There needs to be enough realistic seams for it to work. Occasionally you have enough seams and get this message still and might have to delete and re-draw one or all sections.
@@CLO3D Hello, thanks for the great tutorials and I have learnt a lot. I am also getting the 'Failed to flatten some patterns' error. When this happens I just 'ctrl+z' and go back to 3d window to adjust the patterns, however this creates another issue as the extracted patterns are not sewn together.
How may I solve this?
@@leijiao4725 There are a few best practices to follow; draw on the Avatar with as few points as possible. Add points where you know other pattern pieces will start/intersect and try to always start at an existing point if drawing more than one pattern piece.
23:27 how can I go back to the assembled status after I flattened the patterns? Even if I undo (ctrl+z) it, I couldn't go back. The 'undo' command doesn't work only at this situation.
Sorry for the late response. Were you able to solve your issue?
Thanks CLO for the video. I noticed the volume was not always clear and consistent. At times, it was too soft
Hello. This was something we noticed and rectified in the follow up videos.
when I press the backspace when drawing lines and points, it makes a simulation instead of puting the previous point. How to fix that ?
Hi Jordan. You may want to check your settings. By default only the Space Bar should turn Simulation on.
If you go to Settings > User Settings > Shortcuts > The Simulation is under 3D Garment. Make sure that it is set to "Space"
Hello. thank you very much for the tutorial.
I have a problem with edit 3d pen (avatar) tool editing the initial shape with bug chunks. In contrast, in video you can make subtle changes via edit 3d tool. What can be the reason?
The key to success with the 3D Pen Avatar is to create pattern pieces similar to real-world patterns. There is more information here and you can also search for other help as well. support.clo3d.com/hc/en-us/articles/115012223847-Flatten
Why are the Seam Lengths of the pieces not matching?
Did you show the skeleton in the 3D toggle menu?
Hello, I’m new to this software.
I have seen from the demonstration video of making a dress on the homepage of your website, where you can change the length of the sleeves and the dress, change the circumference of the sleeves and the dress using the cursor at will from the 3D view.
But I can’t find a way to do that in this software. Can you help me to find it?
This is in v6.2. "Style Line" Tools. support.clo3d.com/hc/en-us/articles/900006940243
@CLO what would be the reason as to why some pieces don't light up in blue when I'm trying to flatten them?
Yeah I am facing the same issue..
The shapes must be closed and have similar properties in terms of layout of actual pattern pieces.
there is something weird with the back panel, it didn’t allow me to do most of the things the instructor was saying… I followed step by step and double checked everything and followed exactly but the exercise file just did not work, looking at the other comments people are facing the same issue, please fix this thank you so much.
Make sure you are using the latest version of CLO. Try using one of the latest avatars.
At 33:48 mark there are guides that appear on the avatar when she's using the 3D pen tool, is there a way to make these guides appear? I think i missed this part if she did mention it during the video.
When you begin this technique the measurements turn on automatically. You can also turn them on any time in the 3D Toggle Menu in the Avatar section.
Hi!
After flattening my patterns to the 2d window, although I get the pieces they are not all sewn up together. What is causing this issue?
Thanks!
You have to draw and flatten the patterns all at once; this will sew the patterns together. IF you only do half, you can unfold or make a symmetric copy and sew the center seams.
Hello can you please explain how you got your tool layout across the top like that. I been trying for days since I started using MD to do that without having to long press and click to no avail
Settings Menu--> User Settings--> User Interface--> Mode & Toolbar
Is it possible to import wire shapes (from Illustrator eg) and use those to get a more accurate wire?
Illustrator files can be added to CLO as pattern pieces. They must be closed shapes. It helps if they have a fill color but NO outline.
I just downloaded de 7.1 version on a MacBook but I can’t find the flatten tool! Need your help :(
-Hi Jose. Depending on your set up the tool may be hidden/stacked under another tool. If you have Group Tools tuned on the tool is under. If you Click and Hold the 3D Pen (Avatar) tool you will see a drop down appear to select flattening.
-You can tell if Tools are stacked by there being a small Grey triangle in the lower right corner of the tool button
-Group tools can be turned on/off under Settings > User Settings > User Interface > Mode & Toolbar. So if you have a larger screen/monitor you can ungroup the tools. But if your screen is smaller it is recommended to keep the tools grouped
@@CLO3D thank you very much!!!!
it turned out that the tool was hidden this was very helpful
:) :) :)
Thank you so much for your video,
You are welcome
Hello! Thanks CLO for this video, i have a question about curve line, how to make it? because i'm doing step by step as she is saying and i can't make it ((( i have the last version
Hi There. We have a video from our Beginners Guide to CLO that covers each of the Curvature Tools and how they are used here ruclips.net/video/2txgDjHsXIc/видео.html
When unfolded, my parts are made up of a large number of small segments. And you have each line from one segment, without points. How to do it?
Each segment corresponds to a point you added while using the 3D Pen Avatar - The fewer the points, the fewer the segments. You can either delete the segments you do not need or Right Click and convert them to a Curve Point.
@@CLO3D I FOUND IT! "convert to curvepoint" i flatterned conturs of OBJ object, not from 3D pen.
May I know under what circumstance, we need to edit like 25:35 ? is it important?
This isn't an edit, it is more an explanation of why the pattern piece appears to have flat sections and it shows the difference between a Low Res pattern piece & a High Res pattern piece.
@@CLO3D I see. Thanks for the reply!
I have CLO 5.2 latest update since 5/25/20. When I press enter to flatten, it freezes the software 7 times out of 10. It also freezes my entire computer once every 3 or 4 days and I have to hard boot the entire PC.
My system is a an Alienware Aurora Ryzen Edition, Ryzen 9 3900 12-Core. 3.09 Ghz. 32gb system ram. Windows 10 Home Edition with all latest updates. Nvidia Geforce RTX 2080 Ti - 11gb ram.
Hello -So sorry this is happening. Have you checked to upgrade to the most recent NVIDIA card drivers? The other action you wan to go through is making sure CLO is actually running off the NVIDIA Card.
aps2.toshiba-tro.de/kb0/TSB5603RN0000R01.htm
NVidea Graphic card drivers download location: www.nvidia.com/Download/index.aspx
Your specs are good and hopefully the above actions fix this :)
@@CLO3D I already have the latest Nvidia driver. That instruction that you link to is for Windows 7. I'm running Windows 10. None of the information in the link matches what is in Windows 10. If I right click on Geforce Experience, it doesn't show, "Run with Graphics processor" at all. If I open Nvidia Control Panel, "Select preferred graphics processor" is not available.
The only thing I was able to do was to add CLO 3D to the list of programs in the Nvidia Control Panel. It was not there initially. Is that enough? I did not change any of it's default settings after I added it.
The process is similar between 7 and 10 for this action, but yes all you have to do is add CLO to the list of programs and choose apply. You don' have to change any settings in CLO. If CLO was not in this list this may be why it was crashing often. Below is a video demo specific to 10, but sounds like you already successfully switched it.
www.google.com/search?q=how+to+set+a+graphics+card+as+default+on+windows+10&rlz=1C1CHBF_enUS848US848&oq=how+to+set+a+graphics+card+as+default+on+windows+10&aqs=chrome..69i57j0l4j69i64l3.11200j0j7&sourceid=chrome&ie=UTF-8#kpvalbx=_fpvOXseFCMWltQbbp4iIAw30
If you continue to have major problems you can email support@clo3d.com for more help.
@@CLO3D Thank you for the help.
does clo crashes o usig flatten? my one keeps crashing when i press enter to flatten the pieces
Sorry you are having difficulties. If you get the crash dialogue box, please enter the steps of what you were doing at the time of the crash. If you do not get that option, please create a detailed post here; support.clo3d.com/hc/en-us/community/topics/115000546428-Product-Feedback
What did I do wrong ? no line shows when I double click to finish the line.
It is best to create closed pattern shapes that resemble real world patterns. The flattening technique cannot create pattern shapes that encircle a part of the body, as an example.
thank you :)
No problem 😊
hi
how do you remove the avatar skin? i'm using version 5.0
thanks!
You can either hide in by clicking the Avatar skin icon in the 3D Vertical Toggle menu or if you click on a part of the avatar, you will see the texture in the property editor... use the delete icon to the right to remove
It works without any problems until I draw a line.
However, it rarely works well at the stage of creating a pattern. the program shuts down
I suggest you search for help in our forums; support.clo3d.com/hc/en-us
who else is getting the "failed to flatten some patterns" error ?
Be sure your drawn patterns are A) similar to real world pattern shapes B) the shapes are all closed at the corners/points
Hi, I am pressing enter and nothing is appearing in my 2d window. I have tried everything I know but cannot seam to figure it. any help would be great!!!
half the commands she is using doesnt work in my model
Hi, I had the same problem. Just realized that if you are on Mac you need to press Return, not Enter.
Sorry for the late reply. Were you able to solve your issue.
....... 🥰🥰🥰💥💥💥......
3Dpen should definetly be improved and have better vector features. Way too hard to control. And regarding the bustier, what ever had to be ajusted on the property editor, was too fast which means uclear. Maybe something more step by step would be nice.
The tool has made lots of updates since first released, but does take some practice to get used to. And updates are always coming. Make sure you are on the latest version when using. and thank you for your feedback
If you tell this software in Hindi then it will be very kind.
There are a number of Hindi translations available. Do a search on our main page. ruclips.net/user/CLO3Dsearch?query=hindi
why wont this shit motherfucking end when i double click? JESUS FUCKING CHRIST I WILL EXPLODE THIS PROGRAM
We welcome all questions and constructive criticism. If you would like to contribute in a positive way, please do so.
please make hindi video
We are working on making sure our videos can be enjoyed by everyone. We apologize for this inconvenience are working to rectify. Thank you for your patience.
hi I cannot get the curve points to work when pressing control while drawing (all lines stay stright) . I am on MacPro...
Please Hold CMND on a mac for this option.