Banggood still sells a brushless setup for $43 that works awesome in the Bandit/ Stampede 2wd. You can also upgrade the transmission, but that runs $90 . I didn't care for the transmission and went back to the stock one. Brushless is the way to go with a 2wd.
Only other cheap upgrade I would recommend is a 9Imod servo. I have 2 coreless and 1 brushless 45kg. Both are good and strong. The coreless is about $30-35 the brushless is $45ish. They are definitly durable as I have ran the cheaper coreless in my truggy for a few races testing it out. It didnt seem like enough power for the truggy, it pushed like a dump truck. However, I realized it was just the front diff had lost all its fluid. I filled it up and it turned hard again. Still yet to use the brushless, but I am already sure of there durability cause the coreless uses the same gears. Great cheap upgrade system, 4000kv should be pretty fast on 2s geared proper.
It’s easier if you remove stabilizer braces to install servo saver. Just fyi I have the original Stampede two of them that I need to completely change to fm done with am! 🤘🏼✌🏼
Good video! I just got this system have not tried it yet but does look promising. Under the foam in the box it came in there is 3m double sided tape for the ESC in the on off switch and two zip ties.
Thanks! It’s a good system….just watch your gearing…cause the high speed optional gearing seemed to strain this system quite a bit so I geared mine down to 14/83
Hello, I am very curious how he drives it! Can you possibly put subtitles in your videos? We love looking at you, but our English isn't that good. Greetings from Germany
My RC shop salesman is Traxxas store airport hobby shop in Minot North Dakota would charge me $78 for a charger for a battery charger to sell venom battery is what I'm working with I am kind of new to that never worked with one at all so the first thing I think of is the swamped electronics to Traxxas only which that would be a lot more money which I do not having
Yeah the Venom stuff is pretty good…a lot of the batteries I have experienced seem to work as well as, if not better than the Traxxas batteries at a cheaper price too
I used wall plugs and changed to longer screw to lift the esc tray higher so I can fit in 3s battery in there. I’m sure you will try 3s on that new brushless system👍 thanks for sharing
You should be able to calibrate the transmitter and it should be good to go….no binding necessary….you might wanna go through the programming though….it shows how to do that in the instructions
There is another cheap upgrade that makes a huge difference and that is 15mm wheel hex adapters. It widens the stance just enough to help the flip overs. it really helps and its only a $10 upgrade and only takes about 15 minutes.
@@RCKnockout Nolan here is the video I found that showed how well they worked. Check it out. i think your stampede viewers will all like this mod ruclips.net/video/bMb9vGPV23E/видео.html
this should be good, I upgraded both my 2wd stampedes w cheap power systems, all cheap brushless motors seem ok,but the ultra cheap esc's are 50/50 at best. I wound up finding hobbywing esc's on aliexpress for around $30 50A &60A and they handle 3s batteries and work well. I assume this esc from Horizon Hobbies should also work well. it very well could be a hobbywing oem esc like the ones they make for redcat.
No it’s been holding up pretty good….it does seem to get a little hot on 3s and the battery doesn’t seem to last super long….but aside from that no issues
Are kidding this was and kind-of the one of the top 5 electronics for R/C before Spectrum, and HW started to really take over. They where in everything R/C before. I would say it was around 2013- 2016 around
I won’t run deans plugs past 2s….they start having issues…I’ve had them trigger limp mode, thats usually the most basic problem…sometimes they melt to the point the solder comes off….or it melts to the battery connector…..I’m very surprised you haven’t had any issues….especially on 6s
@@Geezuhs92 ok you can’t buy these pre-mounted with these tires I can get you links to some similar options though amzn.to/3iwodA0 The first ones are made for the Stampede 4x4 and Rustler 4x4…..they should mount right up on a 2wd since they have the 12mm hexes amzn.to/3EVmsnA The second link is the same wheels as mine with a slightly different Sledgehammer tire….very similar tread design….disadvantage to these is you’ll need some 17mm hex adapters to put these on you Stampede
hey idk if u would be interested but I'm looking for a cheap xl5 for a slash frame I got Im still getting parts but I need an esc I have a motor but if ur interested in selling the xl5 esc for cheap hmu
@@lunchbox3346 you’ll have to look that up….I’m not sure what a new one costs from Traxxas but for the vxl3s and 3500…I’m pretty sure it’s $125….I looked it up before I bought this system actually
![[#2024MAMA] G-DRAGON - 무제(Untitled, 2014)+POWER+HOME SWEET HOME+뱅뱅뱅+FANTASTIC BABY | Mnet 241123 방송](http://i.ytimg.com/vi/Ox29z5Nf1Uk/mqdefault.jpg)
Banggood still sells a brushless setup for $43 that works awesome in the Bandit/ Stampede 2wd. You can also upgrade the transmission, but that runs $90 . I didn't care for the transmission and went back to the stock one. Brushless is the way to go with a 2wd.
Cool, thanks
Finally I have been waiting for a long time my slash is going to go brushless soon
Nice!
I have this brushless system in my 2wd rustler. Runs out pretty good.
Yeah It seems to be a good system
Only other cheap upgrade I would recommend is a 9Imod servo. I have 2 coreless and 1 brushless 45kg. Both are good and strong. The coreless is about $30-35 the brushless is $45ish. They are definitly durable as I have ran the cheaper coreless in my truggy for a few races testing it out. It didnt seem like enough power for the truggy, it pushed like a dump truck. However, I realized it was just the front diff had lost all its fluid. I filled it up and it turned hard again. Still yet to use the brushless, but I am already sure of there durability cause the coreless uses the same gears. Great cheap upgrade system, 4000kv should be pretty fast on 2s geared proper.
Thanks for the tip! Usually when I replace a servo I just buy a cheap metal geared one….I’ve got a few extra sitting around
It’s easier if you remove stabilizer braces to install servo saver. Just fyi I have the original Stampede two of them that I need to completely change to fm done with am! 🤘🏼✌🏼
Thanks for the tip! lol 😂
Good video! I just got this system have not tried it yet but does look promising. Under the foam in the box it came in there is 3m double sided tape for the ESC in the on off switch and two zip ties.
Thanks! It’s a good system….just watch your gearing…cause the high speed optional gearing seemed to strain this system quite a bit so I geared mine down to 14/83
Hello, I am very curious how he drives it! Can you possibly put subtitles in your videos? We love looking at you, but our English isn't that good. Greetings from Germany
Greetings…I would but I feel like that would be very distracting for most viewers if the channel
@Prizel Tate you can turn subtitles ‘on’ right on the screen
I need help figuring out a charger for my RC car it's a t-60 plug-in I only get $30 to spend and I'm looking for a Amazon cheap RC charger
The ones I’ve used cost a bit more than that….usually $50-$80….I’m sure there is something out there in that price range that works well though
I like the onyx combo. Have it in a ecx amp crush. Mine is the 3300kv. It's a wheelie machine on 3s
Nice man! How’s it holding up?
My RC shop salesman is Traxxas store airport hobby shop in Minot North Dakota would charge me $78 for a charger for a battery charger to sell venom battery is what I'm working with I am kind of new to that never worked with one at all so the first thing I think of is the swamped electronics to Traxxas only which that would be a lot more money which I do not having
Yeah the Venom stuff is pretty good…a lot of the batteries I have experienced seem to work as well as, if not better than the Traxxas batteries at a cheaper price too
I used wall plugs and changed to longer screw to lift the esc tray higher so I can fit in 3s battery in there. I’m sure you will try 3s on that new brushless system👍 thanks for sharing
That’s a good idea….but the 3s still won’t fit under the strap though…..
@@RCKnockout I use Velcro battery strap
@@MechanicallyFun do they make one or did you have to cut into the chassis?
@@RCKnockout I just run Velcro strap around the battery and underneath the chassis. It does hold the battery in place
Nice work can't wait to c how it rips. I bet its gonna wheelie all the time.
Thanks! Yeah it’ll be a wheelie monster
I added wheelie bars to both
Mine and set them on the lowest setting so it just wheelies a little bit off the ground.
Nice logo. Cant wait for a drive and a speed test on that stempede
Thanks! Stay tuned for those videos!
I just bought that exact same combo but I’m not figuring out how to bind it but, so can you do a video showing how to make it run please?
You should be able to calibrate the transmitter and it should be good to go….no binding necessary….you might wanna go through the programming though….it shows how to do that in the instructions
love videos like this not many videos of the stampede around!
Thanks! That’s true
There is another cheap upgrade that makes a huge difference and that is 15mm wheel hex adapters. It widens the stance just enough to help the flip overs. it really helps and its only a $10 upgrade and only takes about 15 minutes.
I’ve never heard of 15mm hex adapters…..I’ve heard of 14 and 17….what wheels do they go with?
@@RCKnockout Nolan here is the video I found that showed how well they worked. Check it out. i think your stampede viewers will all like this mod
ruclips.net/video/bMb9vGPV23E/видео.html
@@arcaderacer586 I’ll definitely take a look! Thanks man!
Name of them for Google?
@@rckingracer 12mm to 15mm hex extension adapter
I saw the title and i was like "yeeeeah". Always good content!
Appreciate it!
like the new logo 💯 epic upgrades
hopefully it's super fast now
Thanks bud! Yeah it should be a ripper!
Can you use a stock radio controller ( that you hold ) with this setup? Thanks..!
Yeah you can
this should be good, I upgraded both my 2wd stampedes w cheap power systems, all cheap brushless motors seem ok,but the ultra cheap esc's are 50/50 at best. I wound up finding hobbywing esc's on aliexpress for around $30 50A &60A and they handle 3s batteries and work well. I assume this esc from Horizon Hobbies should also work well. it very well could be a hobbywing oem esc like the ones they make for redcat.
Yeah hopefully it’ll hold up well! 🤞
$25 more you can get the spektrum motor and esc which is a beast
This systems been holding up really well
I though I was watching a Chris fix video when you hit your intro😂
It’s not the first time I heard that lol 😂
I still have my onyx 100 charger that I got when I was like 8 for my bandit lol
Nice! Good to hear it’s still working!
What tires do you have on it?? I need to replace my tires on my stampede
These are the Proline Badland Mx28 tires mounted on Traxxas Maxx wheels
@ thanks I’m gonna have to order those!
@@MyHomeSchoolLife your welcome!
Digging the new logo! Very cool.
Thanks brother!
Hi, how’s the Onyx brushless combo system holding up on your stampede so far? Any problems or issues? Thanks
No it’s been holding up pretty good….it does seem to get a little hot on 3s and the battery doesn’t seem to last super long….but aside from that no issues
Hi I am planning similar conversion with 4000kv. Would it have more speed and performance with stock gearing?
Yeah it’ll definitely give you better performance than the stock brushed system
@@RCKnockout thank you, hopefully I wont mess it up. 😂 Subscribed 👍
@@SuperKozykozy you’re welcome! Appreciate the sub!
Are kidding this was and kind-of the one of the top 5 electronics for R/C before Spectrum, and HW started to really take over. They where in everything R/C before. I would say it was around 2013- 2016 around
Still never heard of them….they must be under Horizon ownership now
Can you program the ESC??
Yeah! There’s a few things you can change in the Esc
About a put this same moter and esc in my stampede 4x4 😎
Nice! Should work well!
Can you make the 2wd Stamp a 4s powered truck?
Yeah you could
So, Nolan, are you feeling tempted by the new Traxxas XRT? 🙂
Nope….I don’t like rc cars with wings or spoilers ….that’s why I don’t like my EXB
11:44 I was thinking you could just modify the side part so you could just screw it is or just supper glue the side part so you could screw it in
i like the new channel logo
Thanks!
@@RCKnockout would you know by any chance why the servo of my truck isnt turning the wheels much or at all?
@@stinkmod2297 not sure could be a lot of different things…..could be the servo itself or something in the steering bellcrank
@@RCKnockout nvm some how i turned the knob on the controller all the way down
@@stinkmod2297 gotcha…No worries
Great wrenching vid 👊
Thanks!
do you think this can fit in a touring car if yes how fast do you think it will go
It might be able to fit in a touring car….not sure how fast it’ll be it depends on the gearing
@@RCKnockout what gearing and battery do you think I need to go to 50+
@@Danny.trx4sprt I wouldn’t be able to tell you….the tire size is a big factor
@@RCKnockout oh alright well thanks
@@Danny.trx4sprt yep
hi what is the Traxxas brushed Stampede 2wd stock pinion size
I honestly can’t remember
cool video and upgrades
Thanks bro!
@@RCKnockout 🙂👍
Good video 👍🏽
Thank you!
Is the esc waterproof?
Yeah
What kinda battery did you use can u send a link?
Yeah I use ones very similar to these
amzn.to/3FIRsrm
What type of adapter would I need if I’m running the traxxas battery?
@@TimothyIvanov648 you would need a Traxxas Female to Ec3 Male Plug adapter
Thanx
@@TimothyIvanov648 yep
i have ran deans on 6S with no problem
I won’t run deans plugs past 2s….they start having issues…I’ve had them trigger limp mode, thats usually the most basic problem…sometimes they melt to the point the solder comes off….or it melts to the battery connector…..I’m very surprised you haven’t had any issues….especially on 6s
@@RCKnockout they have got warm 2 timestamp but when I cleaned them they where fine again for a month or 6
@@maartencoppens7312 interesting…I just don’t really like them
@@RCKnockout but now I changed to xt90. Cause my oldbattery died
@@maartencoppens7312 xt90’s are way better than deans plugs….
Anyone have a link to those wheels?🙏
Mounted or unmounted? Cause I had a very hard time finding these wheels unmounted
@@RCKnockout mounted preferably. I have a stampede too and they look pretty good on the truck
@@Geezuhs92 ok you can’t buy these pre-mounted with these tires
I can get you links to some similar options though
amzn.to/3iwodA0
The first ones are made for the Stampede 4x4 and Rustler 4x4…..they should mount right up on a 2wd since they have the 12mm hexes
amzn.to/3EVmsnA
The second link is the same wheels as mine with a slightly different Sledgehammer tire….very similar tread design….disadvantage to these is you’ll need some 17mm hex adapters to put these on you Stampede
@@RCKnockout Awesome! Thank you bro🙏🏽
@@Geezuhs92 you’re welcome!
hey idk if u would be interested but I'm looking for a cheap xl5 for a slash frame I got Im still getting parts but I need an esc I have a motor but if ur interested in selling the xl5 esc for cheap hmu
No….I don’t use the hcg chassis anyhow…already got two of them sitting around….thanks anyways bud
@@RCKnockout no u misunderstood me I wanna buy the brushed xl5 esc I have a chassis I'm trying to build
@@theLyzhendricks oh I gotcha….I think I’m gonna use it in another rc
Don't over heat it too much the bearings aren't that good I've went through that motor in my 2wd slash
Good to know, thanks!
@@RCKnockout you want to keep it under 150 degrees
@@carlosmagana3371 ok thanks
For the same price u could've done the power up program from traxxas
I’m pretty sure that’s around $125….so that not the same as $79.99
@@RCKnockout they say on the website it's about half of a new 1
@@lunchbox3346 you’ll have to look that up….I’m not sure what a new one costs from Traxxas but for the vxl3s and 3500…I’m pretty sure it’s $125….I looked it up before I bought this system actually
you can go cheaper get the surpass hobby combo s
That’s true….you could always find something cheaper…this seems like a good system for the price though