I was always searching for a tpt eq video...So I bought one and made my own a few months ago now I see this...but no prob. Nice video #TímpanoaudioSur. #PRVaudioSuriname 🇸🇷✌
I have mines wired exactly like yours but sound is only coming out the right front and rear speakers..What can the problem be? It's a 2 channel amp by the way
I got this eq with the prv dsp as a package deal. Im running my alpine cde-172bt head unit, this eq, prv dsp2.8x, Memphis Audio VIVseries Belle but only using 4 channels, and memphis audio VIVseries 2200.1 amp. How would i hook up the eq to the dsp
The back of my pioneer deck has 4 rca (Frnt L,R & REAR L,R )outputs and 2 sub outputs (sub L,R) But this preamp has 2 inputs only (Input L,R) what am i to do in this instance?
Hi my name is Eric. Hey, I am running the same DSP as your running I am trying to figure out the hook up of it the RCA side I have a EQ to Mayeye DSP I have two 4 channel amp one bass amp. I also have in my front doors to 6 1/2 inch speakers on one side and two tweeters my rear doors I have two 6 1/2 and a tweeter. My problem is I am trying to run every thing active so I have a channel for my front tweeters a channel 4 -6 1/2 inch which are tied together. The front door tweeters are tied together to the rear door 6 and a half are tied together, and one tweeter is by itself so I purchased a eight channel DSP do you think you can help me with a drawing or tell me the RCA hook up basically is there one RCA per channel so one RCA for the tweeters right door one RCA for the tweeter left door one RCA for the 6 1/2 right door one RCA four 6 1/2 driver door same in the back thanks I really would appreciate it. My install is held up right now trying to finish ?
Can this cut and boost frequencies per channel? Say, I have a mid range speaker that plays 120 Hz to 6000 HZ and I want to cut frequencies above 6000 Hz because my amplifier only has a high pass filter.
this is not a Crossover, it will properly cut to a frequency range, you can only equalize it, + 12dB or -12dB per frequency range - the equalizer is a tool to fine tune your system, to hit the frequency you want to, or even to remove unwanted harsh range
Hola, necesito el manual o un vídeo manual para usar el amplificador tímpano TPT500.4, dónde lo puedo encontrar o pueden hacer un vídeo acerca de, por favor?? Hi, I need the manual or a video manual to use the TPT500.4 eardrum amplifier, where can I find it or can you make a video about it please?
I LOOVVEE this equalizer...everyone told me to get a clarion but I'm only using prv and timpano products so I bought this eq
Damit,,I'm sold ..!! I need this now please..I was gonna go with clarion..my long time bass bud swears about the difference in clarity...
These equalizers are very popular with the latin pro audio users in car audio competition!
I was always searching for a tpt eq video...So I bought one and made my own a few months ago now I see this...but no prob. Nice video
#TímpanoaudioSur.
#PRVaudioSuriname
🇸🇷✌
Jow mi kang gebruik 12v nr bove gi a sem eq fmie ?
@@CleyDjosoero jatg na 12v
Have a strong feeling I will get this instead to go with my timpano 10" v2
I have mines wired exactly like yours but sound is only coming out the right front and rear speakers..What can the problem be? It's a 2 channel amp by the way
Can I use this eq straight of my factory car sound system? I don't know where tha amp is located on my pick up truck nissan navarra np300.
I got this eq with the prv dsp as a package deal. Im running my alpine cde-172bt head unit, this eq, prv dsp2.8x, Memphis Audio VIVseries Belle but only using 4 channels, and memphis audio VIVseries 2200.1 amp. How would i hook up the eq to the dsp
i would connect the eq first then the eq to the dsp you would need rca y connectors you can find 3 rca pairs to 1
The back of my pioneer deck has 4 rca (Frnt L,R & REAR L,R )outputs and 2 sub outputs (sub L,R) But this preamp has 2 inputs only (Input L,R) what am i to do in this instance?
Hi my name is Eric. Hey, I am running the same DSP as your running I am trying to figure out the hook up of it the RCA side I have a EQ to Mayeye DSP I have two 4 channel amp one bass amp. I also have in my front doors to 6 1/2 inch speakers on one side and two tweeters my rear doors I have two 6 1/2 and a tweeter. My problem is I am trying to run every thing active so I have a channel for my front tweeters a channel 4 -6 1/2 inch which are tied together. The front door tweeters are tied together to the rear door 6 and a half are tied together, and one tweeter is by itself so I purchased a eight channel DSP do you think you can help me with a drawing or tell me the RCA hook up basically is there one RCA per channel so one RCA for the tweeters right door one RCA for the tweeter left door one RCA for the 6 1/2 right door one RCA four 6 1/2 driver door same in the back thanks I really would appreciate it. My install is held up right now trying to finish ?
I have it yet I can’t program it it’s frustrating I have all timpani in my car and can’t get the correct sound.
Can this cut and boost frequencies per channel?
Say, I have a mid range speaker that plays 120 Hz to 6000 HZ and I want to cut frequencies above 6000 Hz because my amplifier only has a high pass filter.
Yes
this is not a Crossover, it will properly cut to a frequency range, you can only equalize it, + 12dB or -12dB per frequency range - the equalizer is a tool to fine tune your system, to hit the frequency you want to, or even to remove unwanted harsh range
Hmmm this is the perfect eq for my timpanos doors .tweets an mids speakers
Hello thank you for your video. When I connect my eq I'll let u how how it went.
Hola, necesito el manual o un vídeo manual para usar el amplificador tímpano TPT500.4, dónde lo puedo encontrar o pueden hacer un vídeo acerca de, por favor??
Hi, I need the manual or a video manual to use the TPT500.4 eardrum amplifier, where can I find it or can you make a video about it please?
Como te a funcionado el 500.4 ?
light switch can off the light when eq running on ?? or only change a light colour ?
You can only change the color
Cómo aumenta los volts de salida? He utilizado la entrada principal pero no aumenta los volts