@@skypallman6169 you obviously don’t know about motorcycle audio competitions. You should check it out, then you’ll understand the need for a DSP on a motorcycle.
Good run-through of the features. Looks pretty good for the price. What's missing here is the depth of audio processing that will give the ability to tune a system fully flat. What I mean is, a 15 band graphic EQ is limited. A single band parametric EQ only let's you fix one problem area. A very good DSP will have 30 band graphic EQ and minimum of 10 parametric EQ filters. I would pay double the price of this for the same interface design but with more processing. in some cases the ability to program via an app or PC is a must. However, sometime simple is better. i like the simple all in one design of the 2.8X. I am not bashing this DSP unit. I think the price is affordable and I'm going to get one for use on my workbench for testing.
i had mine installed wrong all this time, i had split my sub and mid RCA's and put them in a b. it played very well just needed some tuning. after watching this video and re installing the correct way, i cant get my mids or highs to play. help is very much needed
I have 4 amplifiers and there is only 3 sequencers so now i have 3 sequencers to 3 different amplifiers and then i took remote from one amp to the other amp but that is okay? Nothing will brake? (:
If using a stock head unit with a LOC can I just wire this up in line with the LOC like say for instance... Head unit to LOC to DSP to Amplifier reason I'm asking is I don't know much about installing and everything is already installed and working I'm just wanting to add this to clean up the signal for better clarity
So, if you ran one DSP FOR THE LEFT AND ONE DSP FOR THE RIGHT would that create a stereo sound instead of a MONO sound? Or is that even necessary? Update, I just got this yesterday! Pictures, videos, do it no justice. It's really a nice unit!
I was thinking of getting 2 of these. So I can run rca cables from my rear speaker and one from my front speaker rca out. Have one for the amps for my tweets and the other one going to my Amp for the mids. Have 8 6.5" mids and 8 horn tweets.
Thankyou Sir!. Is it possible to configure my subwoofers to selectively receive specific bass frequency ranges, such as 30-60 Hz and 120-160 Hz, using the DSP?
the "master volume" feature is what changes output voltage from 0v to 5.6v max, it will be clean all the way through as long as ur input to the dsp is clean
Does this forget all it's settings when disconnected from power for long periods.I might be using this at home rather than in the car so wouldn't have power all the time.
Hey im looking for a dsp for my setup im gonna have a sub amp,4ch highs amp,6ch mid bass,midrange so what dsp do you recommend, how would i do all though rca's cause thats 12 channels my aftermarket radio has front,rear,sub rca's thanks
Actually could I run the right rca from my head unit front and left rca from rear head unit rear. I just want more control from my head unit for my tweets and mids. Going to have them on separate amps.
Just bought a DSP2.4 for a home audio system. The idea was to use it to feed six audio amplifiers for a set of three-way speakers, and one more channel for subwoofer output. So I need this DSP unit to first send A signal four ways into the red RCAs of the four outputs, and B signal to the white RCA's four-way also, before crossovers and EQ's were configured. Is it possible with this 2.4 unit?
We would not recommended this unit for a home audio system, because you will need a 12volts converter to power it, but you can sure set as you described
how are u making sure that the amp out put to speaker, is actually sending the signal, freq, that u set on the dsp ? my amps don't have a pass thru, so, how am I supposed to set the frequency at the amp ? To not go against the dsp, frequency?
I have a PRV SC-20FT Pro 2 Channel RCA cable and I also bought this DSP. Being that the DSP only has 2 inputs… which output on my head unit do I plug the RCAs into? Front, Rear or Sub out? Or do I need Y splitters? If so, how do you recommend I wire the head unit and DSP for optimal performance?
I must have pressed something in the thing and it won't save the x over settings in the individual channels... Something is overriding it.... Example if I goto xover output 3 change it to low pass 80hz bt12db.... When I click away then go back to output 3 its back to hpf off
hey bro sorry to disturb you I need your help to set my DSP... I have a ( DSP Crossover & Equalizer 8 Channel Full Digital Signal Processor (Sequencer).. and I have 4 speaker 225rms 4ohm and Bridge to 2ohm.. can you explain to me how to set my DSP properly please
I have a amp installed on my harley in which the amp gains (crossovers) are already set from the factory. I'm about to add some subs ,Would my speakers still benefit from this module?
Question for eveeryone on here - I have bneen using Dayton DSP on my harleey for a few years and its a noisy DSP. i dont get the noise when i bypass it straight to the amp. Is this unit betteere theen the dayton?
My first two channels are for my front door 6x9s that are ran in parallel with the dash tweeters. What do you suggest the settings be for that? I want some mid bass up front but don’t want to blow the tweets. Please help. 6x9’s are JBL GTO939 100 watts rms each. Tweets are Skar 3.5 150 watts rms.
Sorry bud but you’ll need components for any real bass. You’ll also have to connect a crossover rewiring the tweeter to not cross over LF only HI look up Car Dash Tweeter Speaker Wiring Harness automatically plugs in
I have 14 speakers. 5 per door, and 2 per A pillar. Now could I use two of these in stereo? Run 1 run to 1 and use 7 outputs on left and same on the other but make it right? Or could I take front dash L with door R and front dash R with door L that way I’m using the left and right on BOTH?
Currently have a 2021 challenger with the stock head unit I’m running 2 amps and a battery pack with 2 kicker 12s all ds18 on the mids and highs I already have a converter the lc6 or 7 can’t remember would I need this if I already have a converter ?
Can u tell what good crossover to 😮 put a set deaf bonce Sylvesters 6.5 midrange speakers they don’t like to much bass, I listen to a lot of rap music?
you have to check with the manufacturer for setting on those speakers, if it was a PRV Audio Speaker we do have all crossover point recommended on our website
I just bought one of these, I'm wondering with only one pair of inputs how would someone get the rear channels to work? It seems the functionality is focused on purely highs, mids & lows and maybe some stereo if you want.
it takes a left and right rca signal and multiples it 8xs. so you can set it up multiple ways 1 and 2 front left & right 3&4 can be rear left and right the turn the gains up and down if you needed to fade front &back
So any channel you choose to be a subwoofer Channel, well it's high pass filter is a subsonic filter... Same thing bubs... High pass filter = subsonic filter in a subwoofer crossover/settings... No biggie.. it's all a learning experience
@@banlmao1707 my DSP has a bandpass filter so I can use both.. I don't know if this one has one and I didn't think about that so my bad, anyways I always use the subsonic filter on the amplifier anyways.. no need to use it on the DSP ,but yeah now that I think about it, it would be cool to have just a dedicated subsonic filter on a DSP.. I guess you're right....and the bandpass that I am speaking of I usually use on my mids and highs anyways, so once again and as I said, it's always a learning experience now for myself....
@@josegiraldez6230 I’m assuming by using the low pass and high pass at the same time it’s basically a bandpass option, and I can set the hpf as low as I want so it would be a subsonic filter
No it does not reset if you removed from your system! We do have even some authorized dealers that Tune the unit at thier shop and ship to the customers with all the settings so they can just plug it in and use it
you are very knowledgeable about the device itself and how to work around the settings, but you explained in the input parametric eq wrong, specifically the Q-Factor the tighter or the lower the value the more that will affect neighboring frequencies and the looser or higher the number the the less that will spread and affect neighboring frequencies. if you want to cut 63hz frequency or boosted without affecting 50hz or 80hz you will choose a higher number... but if you want round out more evenly and lower or boost everything around the 63hz you will go with a smaller number.
Why would you even bother? It's not like you are going to hear it. I would suggest a helmet with headphones, that is about the only way. I have heard Harleys go down my street with the 'stereo' trying to blare out anything that can be heard over the raucousness and they sound HORRIBLE. My guess, without measuring, would be that the THD is about 90%.
@@MrJdsenior even though I'm old I still like to cruise have you ever heard of parking lot pimp this is something people used to do was to have a cool vehicle with the sound system thank you for your comment but this section is for people who like to play the music loud you can get your earbuds and get off this platform with those kind of comments Boomer LoL 🤣😆🤣
If you are running this DSP on your system, you should manager all setting for your subwoofer on this unit - which you will need to set a HPF and LPF for that channel
With this dps can I run 2 Prv SQ6000 1 tuned for my Mid Bass the other with my Subs ? If yes how do I pair that with my Pioneer Head unit where the out going RCA is "front " "rear" "sub"
the PRV DSP 2.8X is a great option you can use the either connection from you radio ( to your prefer ) you will just need to route the input signal to the right output channel for the subwoofer amplifiers
Seriously, every single video I watch just skips over the save feature, and I've watched several. Does it even work? I have tried to save and all I get is some stupid screen where they want a name input. I can't get past this to the actual save. Could you PLEASE tell me how to do this? I emailed the manufacturer this question and cue the crickets. I can't find it on google, YT, the manual, or anywhere else. PLEASE HELP.
There is no saving - everything is saved as soon you set it! You can save different profiles but when you are doing adjustment whatever is set is saved already! even if you unplug the units all the settings will be saved when you turn it on back again.
So i can get a decent head unit "android unit" which has a decent eq tuning most of the time and this with amps and get rid of an normal eq and crossover i suppose. Might be harder to get used to it but at the end of the day you save up some $$ and this does the same job
yo, the larger the q, the more narrow the bandwidth is bro. 1 octaves = 1.414. 2 octaves Q = .667 the lower the Q, the broader the bandwidth curve of frequencies become, affecting more frequencies. the higher the Q, the more narrow the bandwidth curve of frequencies become, affecting less frequencies
I’ve been running this DSP on my motorcycle since 2019 and no one could explain how to properly use it. This video is extremely useful, thank you.
Literally can't think of a more absolutely pointless and useless endeavor by putting a DSP on a motorcycle! 😂
@@skypallman6169 you obviously don’t know about motorcycle audio competitions. You should check it out, then you’ll understand the need for a DSP on a motorcycle.
Bout to put one on my motorcycle too
I’m curious Where did you mount it, so that you could access it? Thanks! I’m considering this one for my system
A vehicle dosent need to have a roof to sound good. i put onee on my bike and it changes that sound completely. Just like you would want on your car.
Good run-through of the features. Looks pretty good for the price. What's missing here is the depth of audio processing that will give the ability to tune a system fully flat. What I mean is, a 15 band graphic EQ is limited. A single band parametric EQ only let's you fix one problem area. A very good DSP will have 30 band graphic EQ and minimum of 10 parametric EQ filters. I would pay double the price of this for the same interface design but with more processing. in some cases the ability to program via an app or PC is a must. However, sometime simple is better. i like the simple all in one design of the 2.8X. I am not bashing this DSP unit. I think the price is affordable and I'm going to get one for use on my workbench for testing.
and did you get one? whats your thoughts a year later?
Best Unit I Ever Used, Super Easy & Super Clean. I Definitely Highly Recommend It.
So basically if I use this I can eliminate the equalizer I have and the cross over because this dap is 2 in one am I right
Not sure how i didn’t find you before cos I have been looking for a decent instruction video. Thank you 🙏
i had mine installed wrong all this time, i had split my sub and mid RCA's and put them in a b. it played very well just needed some tuning. after watching this video and re installing the correct way, i cant get my mids or highs to play. help is very much needed
Can you confirm that on the phone leads are you using one pair or single to split
You mentioned output signal saturation if the lights blink. Can you explain how this can be remedied?
It’s been a year let’s see those other videos you said you would make about measuring for delay this would be helpful with my Stunt wall
If you have 6 midrange amps you will have to split lead it can you confirm
Could you kindly do a video on the sub woofer side of things on the dsp I’ve just order one but little confused
I like this. But what's the volt output for RCA's?
I have 4 amplifiers and there is only 3 sequencers so now i have 3 sequencers to 3 different amplifiers and then i took remote from one amp to the other amp but that is okay? Nothing will brake? (:
If using a stock head unit with a LOC can I just wire this up in line with the LOC like say for instance... Head unit to LOC to DSP to Amplifier reason I'm asking is I don't know much about installing and everything is already installed and working I'm just wanting to add this to clean up the signal for better clarity
Did you make a video doing a deeper dive into how to set the limiter because I can't find it. Thanks
Still waiting on that
A year later lol
So, if you ran one DSP FOR THE LEFT AND ONE DSP FOR THE RIGHT would that create a stereo sound instead of a MONO sound? Or is that even necessary? Update, I just got this yesterday! Pictures, videos, do it no justice. It's really a nice unit!
Just about to install one of these, this is super helpful!
HOW DO YOU LIKE IT SO FAR?
WHAT IS YOUR SYSTEM SETUP?
@@stillrumone love it, very customizable! Go to my channel, I have some videos of the setup in the most recent ones. I would buy again in a heartbeat.
I was thinking of getting 2 of these. So I can run rca cables from my rear speaker and one from my front speaker rca out. Have one for the amps for my tweets and the other one going to my Amp for the mids. Have 8 6.5" mids and 8 horn tweets.
That makes no sense bruh. You only need one set of input.
The only reason i would is 2 dsp is to be able to adjust balance front to rear rear to front balance other than that you can pretty much use one dsp.
Where are the other in depth videos on this unit. I bought one and just need some crossover tips.
Can we talk about Q factor, and what parametric equalization is for in detail. I don’t understand.
you are crazy! It has helped me a lot, thanks for the video. Greetings from Chiapas, Mexico.
you are welcome!
Cual dsp me recomiendan prv 2.8 ó taramps ?
Thankyou Sir!. Is it possible to configure my subwoofers to selectively receive specific bass frequency ranges, such as 30-60 Hz and 120-160 Hz, using the DSP?
I'm trying to understand all the settings for just the subs
Exactly and no one reply’s
Definitely gonna send a ton of people over here for this video
Wanted to know what is the voltage range for preamp inputs going into amps this can set?
No manufacturers ever show this. It’s so important.
the "master volume" feature is what changes output voltage from 0v to 5.6v max, it will be clean all the way through as long as ur input to the dsp is clean
What should the hpf and lpf be on subwoofer?
Does this forget all it's settings when disconnected from power for long periods.I might be using this at home rather than in the car so wouldn't have power all the time.
Great video. Now time to install one on my car.
Would i need 6 outs to use this with a 4 channel amp and a subwoofer amp using 1 subwoofer ?
yes, this DSP can handle this application
Hey im looking for a dsp for my setup im gonna have a sub amp,4ch highs amp,6ch mid bass,midrange so what dsp do you recommend, how would i do all though rca's cause thats 12 channels my aftermarket radio has front,rear,sub rca's thanks
Good morning and great video!! Do you have the video of the limiter feature in depth?
What gauge wire did you use? The manual size to use minimum 13awg with a 1A fuse? That can't be right can it?
I ran a 12 gauge Ofc wire to my radios positive and negative no issues here
Actually could I run the right rca from my head unit front and left rca from rear head unit rear. I just want more control from my head unit for my tweets and mids. Going to have them on separate amps.
Just bought a DSP2.4 for a home audio system. The idea was to use it to feed six audio amplifiers for a set of three-way speakers, and one more channel for subwoofer output. So I need this DSP unit to first send A signal four ways into the red RCAs of the four outputs, and B signal to the white RCA's four-way also, before crossovers and EQ's were configured. Is it possible with this 2.4 unit?
We would not recommended this unit for a home audio system, because you will need a 12volts converter to power it, but you can sure set as you described
what does the bt and lr portion actually do
how are u making sure that the amp out put to speaker, is actually sending the signal, freq, that u set on the dsp ? my amps don't have a pass thru, so, how am I supposed to set the frequency at the amp ? To not go against the dsp, frequency?
Make sure any crossover on the amp is fully open. If you have a full range switch make sure it's on full range. No bass boost.
I have a PRV SC-20FT Pro 2 Channel RCA cable and I also bought this DSP. Being that the DSP only has 2 inputs… which output on my head unit do I plug the RCAs into?
Front, Rear or Sub out? Or do I need Y splitters? If so, how do you recommend I wire the head unit and DSP for optimal performance?
Front channels
@@drzflyest4 really don't matter front ir rear. Just not the sub
@@Simpleman1078 it certainly does matter as some had units may not put out s full signal to the rear
Is it possible to use both parametric and graphic equalizer?
Yes you can use both. Parametric is for one output, graphic is for all outputs
I must have pressed something in the thing and it won't save the x over settings in the individual channels... Something is overriding it.... Example if I goto xover output 3 change it to low pass 80hz bt12db.... When I click away then go back to output 3 its back to hpf off
hey bro sorry to disturb you I need your help to set my DSP...
I have a ( DSP Crossover & Equalizer 8 Channel Full Digital Signal Processor (Sequencer)..
and I have 4 speaker 225rms 4ohm and Bridge to 2ohm..
can you explain to me how to set my DSP properly please
I have a amp installed on my harley in which the amp gains (crossovers) are already set from the factory. I'm about to add some subs ,Would my speakers still benefit from this module?
Question for eveeryone on here - I have bneen using Dayton DSP on my harleey for a few years and its a noisy DSP. i dont get the noise when i bypass it straight to the amp. Is this unit betteere theen the dayton?
My first two channels are for my front door 6x9s that are ran in parallel with the dash tweeters. What do you suggest the settings be for that? I want some mid bass up front but don’t want to blow the tweets. Please help. 6x9’s are JBL GTO939 100 watts rms each. Tweets are Skar 3.5 150 watts rms.
Sorry bud but you’ll need components for any real bass. You’ll also have to connect a crossover rewiring the tweeter to not cross over LF only HI look up Car Dash Tweeter Speaker Wiring Harness automatically plugs in
Just bought one. I am waiting for it to arrive. I am excited to get it installed. Many features.
Great video 👍 were you able to make any more videos with this dsp
Will this add bass to music that doesn’t generally have it? Or is very low like some country music or rock even?
you can equalize every channel to which ever frequency range you would like to - and we do have PRESET for type of music
8:20 you do not mention if your using one channel on dsp you will have to split the phono at the amp
saya dari indonesia bagaimana caranya untuk membeli produk ini ??
I have 14 speakers. 5 per door, and 2 per A pillar. Now could I use two of these in stereo? Run 1 run to 1 and use 7 outputs on left and same on the other but make it right? Or could I take front dash L with door R and front dash R with door L that way I’m using the left and right on BOTH?
yes
QUESTION All the features on the 8ch or the same on the 4ch??
Yes they are the same
Currently have a 2021 challenger with the stock head unit I’m running 2 amps and a battery pack with 2 kicker 12s all ds18 on the mids and highs I already have a converter the lc6 or 7 can’t remember would I need this if I already have a converter ?
a DSP is always needed in any system
Question on the 2.4x: Can you run 1 channel on stereo and have left/right fading? Or do you have to use a 2.8x to fade left to right?
Can u tell what good crossover to 😮 put a set deaf bonce Sylvesters 6.5 midrange speakers they don’t like to much bass, I listen to a lot of rap music?
you have to check with the manufacturer for setting on those speakers, if it was a PRV Audio Speaker we do have all crossover point recommended on our website
Did you figure it out I have them m61ac
I just bought one of these, I'm wondering with only one pair of inputs how would someone get the rear channels to work? It seems the functionality is focused on purely highs, mids & lows and maybe some stereo if you want.
Highs, mids and lows... Can't do more than them 😂
it takes a left and right rca signal and multiples it 8xs. so you can set it up multiple ways 1 and 2 front left & right 3&4 can be rear left and right the turn the gains up and down if you needed to fade front &back
Does this unit have effects like hall and live
no, we do not have use for those functions on car audio setup
Been fussing with the sequencer function. And the dsp won't auto sequence. What am I missing..
This also Apply’s for the prv 2.4x correct?
Correct, both have the same system
@@PRVAudio can I set channel 1 as A and B? For example I would like to crossover my 6.5s at 100hz on A. And my 8s on B at 80hz
Can you put a HPF and LPF on the same channel to bandpass?
I wonder this too
Can you adjust all this with a phone or computer
Would love if these came with a subsonic filter
So any channel you choose to be a subwoofer Channel, well it's high pass filter is a subsonic filter... Same thing bubs... High pass filter = subsonic filter in a subwoofer crossover/settings... No biggie.. it's all a learning experience
@@josegiraldez6230 so i can use the hpf and lpf on a channel at the same time?
@@banlmao1707 my DSP has a bandpass filter so I can use both.. I don't know if this one has one and I didn't think about that so my bad, anyways I always use the subsonic filter on the amplifier anyways.. no need to use it on the DSP ,but yeah now that I think about it, it would be cool to have just a dedicated subsonic filter on a DSP.. I guess you're right....and the bandpass that I am speaking of I usually use on my mids and highs anyways, so once again and as I said, it's always a learning experience now for myself....
@@josegiraldez6230 I’m assuming by using the low pass and high pass at the same time it’s basically a bandpass option, and I can set the hpf as low as I want so it would be a subsonic filter
@@banlmao1707 yes sir..
The settings that are saved, do they stay when the Battery is removed from the vehicle or do you have to set it all over again when power is removed
This unit will automatically save changes that are made, in real time. The memory saves forever even if you remove power.
@@PRVAudio I probably have a older model then because mine looses memory when the car dies and I have to reinput my settings
Can I still run my equalizer with a dsp?
yes you can use a equalizer on the inputs like the PRV EQ7-15
Tim give some info how to use the expert px2
Hifi Vector did one on that dsp
What happens if you remove your car’s battery ?
Everything has to be reset again?
No it does not reset if you removed from your system! We do have even some authorized dealers that Tune the unit at thier shop and ship to the customers with all the settings so they can just plug it in and use it
@@PRVAudio thanks 🙏🏽
I'm learning.
Did u say i can set the frequencies of each output separately. I.e it can be a 8 way crossover?
Yes. 8 individually programmable. Its unbelievable what amazing tech is available at an affordable price.
can you adjust 1 door speaker hpf or lpf at a time or 1 and 2 channels
yes
How would I run this to two mono amps that are gain matched?
I have 4 MR800.NDY 8inch 8ohm prv and I’m using a 3k taramps……. What do you recommend me setting my DSP 2.8x hpf and lpf
we do not have a MR800-NDY model, but all our models have its recommended crossover point on our website
you are very knowledgeable about the device itself and how to work around the settings, but you explained in the input parametric eq wrong, specifically the Q-Factor the tighter or the lower the value the more that will affect neighboring frequencies and the looser or higher the number the the less that will spread and affect neighboring frequencies. if you want to cut 63hz frequency or boosted without affecting 50hz or 80hz you will choose a higher number... but if you want round out more evenly and lower or boost everything around the 63hz you will go with a smaller number.
It should be fine if the alternator puts out 14.2 volts? The prv should handle this amount of voltage?
it can handle up to 16v input on the battery wire
I’ve ran them at 17v no problem
What is the ideal sound system consisting of installed in a Harley-Davidson Tri Glide Ultra TRIKE
Why would you even bother? It's not like you are going to hear it. I would suggest a helmet with headphones, that is about the only way. I have heard Harleys go down my street with the 'stereo' trying to blare out anything that can be heard over the raucousness and they sound HORRIBLE. My guess, without measuring, would be that the THD is about 90%.
@@MrJdsenior even though I'm old I still like to cruise have you ever heard of parking lot pimp this is something people used to do was to have a cool vehicle with the sound system thank you for your comment but this section is for people who like to play the music loud you can get your earbuds and get off this platform with those kind of comments Boomer LoL 🤣😆🤣
I seen it had a hpf, but does it gave a LPF?
Yes
yes, use the main button to select the HPF and you can switch to LPF to enter its settings
can i use this with a LC7i unit...?
yes you can
If I were to run this with my Pioneer 80prs which can be run in active mode, what would I set the head unit to ?
And would I set my amps on full pass?
If you are running this DSP on your system, you should manager all setting for your subwoofer on this unit - which you will need to set a HPF and LPF for that channel
Nice Video !
Greetings from Germany
This is a very helpful video well explained. Also this equipment is very useful in car audio system.
Could I use this if I’m only using one amp for the sub
What would be the benefit of using this
@@rubbensofficial5511 if you watched the video it has other uses besides processing.
Does the 2.4 not have the preset xover feature?
yes, we do have PRESET for the graphic Equalizer inputs
I just bought the ndy500 neos from parts express and WOW!! Im buyin this next im sold on prv!
That is great to hear !!
I want to know why he said nothing about LPF. Since I am trying to set my DSP for my subs and I have no idea how to best set it
With this dps can I run 2 Prv SQ6000 1 tuned for my Mid Bass the other with my Subs ? If yes how do I pair that with my Pioneer Head unit where the out going RCA is "front " "rear" "sub"
the PRV DSP 2.8X is a great option you can use the either connection from you radio ( to your prefer ) you will just need to route the input signal to the right output channel for the subwoofer amplifiers
I have a 3pair rca radio front rear sub.can i use the front or rear output?
you can use either one, to your preference, and then you can set all frequency range to each channel on the DSP
Could you use this on any company's amplifiers ?
Yes.. but I'm sure they or any of those sister Brazilian companies would like that you use their amps instead.. but they would work for any amp...
Thank you ! I have crescendo amps
Does it have EQ settings?
did you not watch the video
???
how do you save your settings to memory?
Seriously, every single video I watch just skips over the save feature, and I've watched several. Does it even work? I have tried to save and all I get is some stupid screen where they want a name input. I can't get past this to the actual save. Could you PLEASE tell me how to do this? I emailed the manufacturer this question and cue the crickets. I can't find it on google, YT, the manual, or anywhere else. PLEASE HELP.
There is no saving - everything is saved as soon you set it! You can save different profiles but when you are doing adjustment whatever is set is saved already! even if you unplug the units all the settings will be saved when you turn it on back again.
When naming the save, the arrow pointing right will end the naming input selection and save the profile
You guys have to do some amp dynos on that 15K and that 11k/9k
Yes, they are available on our facebook and instagram page
Is that time delay video planned for anytime soon?
Tim i cant come out with these settings
Ahhh never been so excited.
Thank you.
I amazoned it today.otw
Thank u thank u
What do you think? Any hiss noise?
@@makhailasharria
So clean!!!!
Perfection.the final piece.
My “flux capacitor”
19:41 still no reply
Thank you for this video. Very helpful.
We need more video about this product
Is pre-amp still needing with this dip?
If you need the extra quick adjustment option, you can can use it
Why all my lights red on mines now
been a month, still red?
This seems like a well-sorted device.
So i can get a decent head unit "android unit" which has a decent eq tuning most of the time and this with amps and get rid of an normal eq and crossover i suppose.
Might be harder to get used to it but at the end of the day you save up some $$ and this does the same job
How do i set the band pass
+1
yo, the larger the q, the more narrow the bandwidth is bro. 1 octaves = 1.414. 2 octaves Q = .667 the lower the Q, the broader the bandwidth curve of frequencies become, affecting more frequencies. the higher the Q, the more narrow the bandwidth curve of frequencies become, affecting less frequencies
That is correct, on the Output EQ for each channel your will have an option to set the Q value
Great explanation
Glad it was helpful!