@@kylegeldmaker hi my friend when I go brushless do I have to change my pinion gear to a 48p 19 tooth like the link on Amazon you posted . Or can I use the stock. I know once I go brushless more things will break😂😂😂 that's why all the links you posted will help me out alot👍 only thing that sucks is that I cant find that bumper you posted always out of stock😤😤😤😂
@@kylegeldmaker I'm getting it from amazon it's a cheap combo😂😂😂 goolrc waterproof bl3650 3900kv brushless motor. Will that work for a 19t pinion gear 🤔🤔🤔. Thanks for replying by the way👍👍👍
Love my (agv) she cost me few change until I found metal output shaft!!! Other then that she’s a beast had her on the shelf for bout 3 mth..now she’s getting new parts..can’t keep her tied down
@@kylegeldmaker billet machine spur get set body/post,hubs,tires,screws.servo/servo saver,wheel axle...jus sumn to get her back running..still lookn for a decent system (new) got her brushless.top speed 45 mph with 25t pinion 3s... DOnt kno if it needs to be faster or not being a 2wd..
@@kylegeldmaker that’s still good speed..I really don’t know if I want to make it a speed truck or jus bash truck same with my senton..it does 45 too but I turn it into monster senton lol big 2.8 mt tires..looking to go 4s-6 wit the senton
@@devinw9698 I haven't gotten bit by the speed bug yet, when I do it'll likely be a typhon haha. I think a monster mojave is in my future, for sure. Especially since I can get an EXB roller to start with.
Mine didn't round out, but like I mentioned in the video I knew it was possible so I really babied the throttle. The truck has the integy steel CVs and I have the metal gears, but I'm going to wait for some free time to record the install.
With all the money spent on this you could have gotten something that came 4x4 and brushless . granite blx 3s $329 and does over 50mph on 3s and you have 4x4 which makes it infinitely more controllable.
Sure, (and I did) but that wasn't really the point. I wanted to see how far I could get a "starter" vehicle. I like the tinker and tune aspect of RC as much as the driving, which is why there's way more "bench" time on my videos than drive time. Plus a granite at 329 isn't really 329, its closer to 450-500 to start, especially now with the price hikes but Im not really counting that since prices were more stable when i recorded this.
If you mean the factory transmitter than originally came with your Voltage, no you can't. Arrma ships Voltages with a 3-in-1 ESC (speed controller, receiver, and servo voltage) that will need to be replaced if you change the ESC. If you're looking to change to a different brushed motor (I had a Titan 12T at one point) that can be installed using the factory ESC and transmitter. What are you thinking of upgrading to?
@@MIAAPAPA it's very likely the diff cups. Look at the composite cup that comes out of the rear diff. Check and see if the slot is more like a hole now.
@@Tuidkskiwjdhdbd haha, I've been to Cleveland a few times for work (Rock & Roll HoF) and Canton a couple times (ProFootball HoF). Does that count? lol
I forgot to add my notes. Here's some of my slightly more organized thoughts: bit.ly/voltage100
Grabbed one of these during last year's black friday for $69. With a cheap 2S lipo it is beyond fun.
These trucks are awesome, me and my nephew have them, mild upgrades on motor side and lipo and great fun !
Nice! How old is your nephew? Can he control it?
@@kylegeldmaker he is 6 and he is pretty good, you can adjust the power and steering level so it suits the person driving
@@colinmorand129 that's awesome!! My little girl just turned 4 and she's able to move it around pretty good.
Thanks for showing your experience on this rig I have one too but all stock. now I can get the stuff on Amazon thanks to you👍👍👍. It helped alot👍👍👍💪.
Absolutely, let me know if you have any questions
@@kylegeldmaker hi my friend when I go brushless do I have to change my pinion gear to a 48p 19 tooth like the link on Amazon you posted . Or can I use the stock. I know once I go brushless more things will break😂😂😂 that's why all the links you posted will help me out alot👍 only thing that sucks is that I cant find that bumper you posted always out of stock😤😤😤😂
@@jordanbriones7464 it depends on the size of the shaft on the motor you choose and your preference for speed. Which motor were you looking into?
@@kylegeldmaker I'm getting it from amazon it's a cheap combo😂😂😂 goolrc waterproof bl3650 3900kv brushless motor. Will that work for a 19t pinion gear 🤔🤔🤔. Thanks for replying by the way👍👍👍
@@jordanbriones7464 send me the link, I'll check it out.
Thx for honest review! I like these kind of vids.
Thanks! I appreciate the feedback. Thanks watching and taking the time to comment.
Great video my rc friend 😁👍
Thanks for taking the time to watch!
This was my 1st truck since gettin back into the hobby.my 1st truck was blackfoot 1989
Blackfoots are super cool. I'd love a period 80s model.
Mine too and after almost 30 years later I’m in the hobby again!
Good video, it will be my 2nd rc , got a scx24 a year ago and its been great so i have to try a basher now
Love my (agv) she cost me few change until I found metal output shaft!!! Other then that she’s a beast had her on the shelf for bout 3 mth..now she’s getting new parts..can’t keep her tied down
What parts are you planning on installing?
@@kylegeldmaker billet machine spur get set body/post,hubs,tires,screws.servo/servo saver,wheel axle...jus sumn to get her back running..still lookn for a decent system (new) got her brushless.top speed 45 mph with 25t pinion 3s... DOnt kno if it needs to be faster or not being a 2wd..
@@devinw9698 That's a missile LOL. Mine is doing about 36 right now on 2s and 19t pinion.
@@kylegeldmaker that’s still good speed..I really don’t know if I want to make it a speed truck or jus bash truck same with my senton..it does 45 too but I turn it into monster senton lol big 2.8 mt tires..looking to go 4s-6 wit the senton
@@devinw9698 I haven't gotten bit by the speed bug yet, when I do it'll likely be a typhon haha. I think a monster mojave is in my future, for sure. Especially since I can get an EXB roller to start with.
The lastic in the drive train wears .outdrive lasted 8 or 9 packs?replaced with steel
Mine didn't round out, but like I mentioned in the video I knew it was possible so I really babied the throttle. The truck has the integy steel CVs and I have the metal gears, but I'm going to wait for some free time to record the install.
"Massage the cavity"
😁
With all the money spent on this you could have gotten something that came 4x4 and brushless . granite blx 3s $329 and does over 50mph on 3s and you have 4x4 which makes it infinitely more controllable.
Sure, (and I did) but that wasn't really the point. I wanted to see how far I could get a "starter" vehicle. I like the tinker and tune aspect of RC as much as the driving, which is why there's way more "bench" time on my videos than drive time.
Plus a granite at 329 isn't really 329, its closer to 450-500 to start, especially now with the price hikes but Im not really counting that since prices were more stable when i recorded this.
If totally but a $300 car now if I had $300 now lol.
Can i use the same transmitter if i change the esc and the motor?
If you mean the factory transmitter than originally came with your Voltage, no you can't. Arrma ships Voltages with a 3-in-1 ESC (speed controller, receiver, and servo voltage) that will need to be replaced if you change the ESC. If you're looking to change to a different brushed motor (I had a Titan 12T at one point) that can be installed using the factory ESC and transmitter. What are you thinking of upgrading to?
@@kylegeldmaker i only want a stronger motor i guess im running 2s lipo5200mah.80c its for my son put i guess we want more speed..
Any suggestions to run faster and better with same esc?
Im very happy with the car the only issue yesterday the motor was running and the tires where not spinning not sure if its the diff??
@@MIAAPAPA it's very likely the diff cups. Look at the composite cup that comes out of the rear diff. Check and see if the slot is more like a hole now.
Screw it you said buy it on sale your fun category is reasom im going to buy it. Im telling them your the reason why
I really enjoyed mine, especially wrenching on it. I should make an update video on mine. Good luck and enjoy!
Thanks man love the channel we think so much alike its crazy wish you were in ohio
@@Tuidkskiwjdhdbd haha, I've been to Cleveland a few times for work (Rock & Roll HoF) and Canton a couple times (ProFootball HoF). Does that count? lol