I have the exact same XJ and I've always loved the moulding on the older Laredo's that covers the bottom part of the doors as opposed to the strips these came with. When I bought it, it was missing the rear door mouldings, so I pulled the rest off. I think I have a springtime project on my hands after I install the UphillMfg front bumper I bought last fall. Thanks!
Wonderful and educational video. What I love the most is that you and your husband are doing things together. I hope that my wife and I eventually do the same.
Well y’all have convinced me to do all my bumpers fenders etc. on my jku Was just gonna do some rattle can duplicolor bed liner But man this looks great
That’s a great idea. I’m get ready to put lower rocker panels on mine Cause the West Virginia road salt has destroyed them. That should probably help keep them from rusting out again. Great job, that really turned out nice.
Looks great, want that professional line use wire trim tape next time works great with raptor liner dont even need heavy duty stuff as raptor line is softer and takes a bit to cure.
Looks great! I’m curious how it has been holding up for you two with going off road and exposed to all the elements? Also, what roof rack rails do you have? My stock ones are shot and those look like they attach strait to the factory rails.
Raptor Liner has held up amazing! Since we wheel every weekend, it gets washed a lot. Especially in the summer with the mud!! And it has held up almost perfectly. A little dull but it hasn’t chipped away, etc The roof is Yakima. Came with the Jeep when we bought it and have since removed it
Que onda muchachos megusto mucho su travajo yo tengo un jeep como el de ustedes y quiero pintarlo y megusto su idea gracias aprendi mucho dios los cuide 👍 desde 🇲🇽
Thanks! You just gave me a big relief cause I just bought an 8 gallons Goodyear compressor for this job but was scared to use it because everyone is using much bigger compressor. Thanks again!
Touchup later using fine line tape and peel off at an angle toward the Raptor lining to correct the waviness. Mist from further away to perfect the texture too. Good job
@@GoatOffroad I'm hoping so, its got smitty built xrc bumpers with a 10k X20 series synthetic line winch and stinger bar upfront so itll have some style. Shes got engine mods but I wont bore anyone to death with that here.
Hey bug, raptor liner looks great, we have something here they call stone chip, water based, but after it dried, you will cuss if you try get it off a car. lol.
Dude buy a decent 6" palm hand sander and a box of 180 & 320 grit for future use on projects and thank me later. Only hand sand areas you can reach with your sander, odd shapes or body lines. Yes it's different if your doing actual bodywork as far as what do by hand.
You guys totally Rock! Buggy looks so amazing! I can't wait to see how the raptor liner holds up over time. Do you know if it will fade? I hope not cuz that black looks so perfect. I want to use this on XJET 😁 thanks for showcasing this stuff!
Project Dan H - we got the kit that came with the gun, 4 bottles of Raptor and 1 bottle of hardner. We bought it off Amazon. Make sure the kit you buy comes with the gun; some don’t
oh my god that line is so crooked? don't do multiple sections of tape. run one stretch of tape the length of the panel. you guys seem like super cool people but it looks really bad. its cool you don't care really but other people might wanna know how to get a straight line. one piece of tape... perfect edge.
![RAPTOR LINER PAINT JOB - How To Paint Your JEEP or 4WD With U-Pol Raptor Liner [Full DIY Guide]](/img/1.gif)
Watch our 3 BEST MODS AND 3 WORST MODS video: ruclips.net/video/pph-LayjDWs/видео.html
Watch "MULTIPLE OFF-ROAD RECOVERIES" here: ruclips.net/video/XdOorv2syOU/видео.html
I have the exact same XJ and I've always loved the moulding on the older Laredo's that covers the bottom part of the doors as opposed to the strips these came with. When I bought it, it was missing the rear door mouldings, so I pulled the rest off. I think I have a springtime project on my hands after I install the UphillMfg front bumper I bought last fall. Thanks!
Nice! looking good guys! Nice to have some heavy paint on the bottom of the doors, plus it looks great!
Thank you! It has held up with zero problems through rocks and sticks rubbing up against it 💪🙌
Wonderful and educational video. What I love the most is that you and your husband are doing things together. I hope that my wife and I eventually do the same.
Sam Arias - Thank You!! We’re best friends! ❤️
SAFETY 1ST WEAR A RESPIRATOR!!!
Well y’all have convinced me to do all my bumpers fenders etc. on my jku
Was just gonna do some rattle can duplicolor bed liner
But man this looks great
Raptor liner is the way to go! Holds up great!!!
Great Job Bug I'm Glad You are My Friend 🐞🐞🐞
Bug is now legit! Great job.
John Beal - 🤣🥰 Thank you!
Many years ago I used what at that time was a spray can of "Body Shutz" to get the same result.
That’s a great idea. I’m get ready to put lower rocker panels on mine Cause the West Virginia road salt has destroyed them. That should probably help keep them from rusting out again. Great job, that really turned out nice.
William Jones - I hope it helps against the salt! The liner has held up for us ; we really like it 😄
Great job guys.
Shawic - Thank You! We had a lot of fun 😄
Looks great, want that professional line use wire trim tape next time works great with raptor liner dont even need heavy duty stuff as raptor line is softer and takes a bit to cure.
Thank you 😊 Nice tip 👍
@@GoatOffroad thanks I know your video is two years old but when I was told about this tape I was omg how did I not know LOL.😆
Iso-topic alcohol. Thanks for showing us!
👍
Looks great
Thank you!!!
Dude you guys are amazing enjoying the amazing video good work
Machine Addictive digging - Thank You so much!! ❤️🐞
Now for those rock sliders!
Kallam Kruse - Yes Kallam Yes!! This weekend! ❤️🐞
Looks great! I’m curious how it has been holding up for you two with going off road and exposed to all the elements? Also, what roof rack rails do you have? My stock ones are shot and those look like they attach strait to the factory rails.
Raptor Liner has held up amazing! Since we wheel every weekend, it gets washed a lot. Especially in the summer with the mud!! And it has held up almost perfectly. A little dull but it hasn’t chipped away, etc
The roof is Yakima. Came with the Jeep when we bought it and have since removed it
Que onda muchachos megusto mucho su travajo yo tengo un jeep como el de ustedes y quiero pintarlo y megusto su idea gracias aprendi mucho dios los cuide 👍 desde 🇲🇽
Looks Awesome!! super easy it seems.. Thanks for sharing
Prepping2endurE - Easy, fun, and loving the look!
Looks good!! I’m guna have to try it on my truck!! Good job!
Bam MasterJ813 - Thank You! I highly recommend Raptor Lining! Take time to prep and play around with the spray to see what finish you like!
Looks beautiful I really want an xj but they're so hard to find in good condition
Kzpy LJ just keep hunting mate, I’m trying to find one in Australia but it is so hard
Kzpy LJ - They are but keep looking! Stay away from a lot of mods already on it; you never know what you’re really getting. Good luck! ❤️🐞
This looks great, and it looks like you 2 had a load of fun too. I do have a question, what size compressor did you guys use?
Jacques Bonn - Thanks! We just used a pancake compressor 😄
Thanks! You just gave me a big relief cause I just bought an 8 gallons Goodyear compressor for this job but was scared to use it because everyone is using much bigger compressor. Thanks again!
Touchup later using fine line tape and peel off at an angle toward the Raptor lining to correct the waviness. Mist from further away to perfect the texture too. Good job
Green Bullitt - Thanks! We’re pretty happy with how it turned out 😄
Nice job.I want to do this to my XJ.
Dan Hambrick - Do it!
Nice work
Benjamin Smith - Thank you! All over would look cool too with diamond plating 😄
@@GoatOffroad I'm hoping so, its got smitty built xrc bumpers with a 10k X20 series synthetic line winch and stinger bar upfront so itll have some style. Shes got engine mods but I wont bore anyone to death with that here.
looks good
Awesome video, looks so good, just about to start doing more parts on my Jeep
Cheap Jeeper - Thank you! Excited to see what you do! ❤️🐞
It’s a Bug’s Life thanks, video will probably be next week on it
Cheap Jeeper - I’ll be watching!!
I did my entire keep in this
Hey bug, raptor liner looks great, we have something here they call stone chip, water based, but after it dried, you will cuss if you try get it off a car. lol.
renier de wet - LOL!! Thank you for watching and commenting!!! 🥰
Great job
Keith Lea - Thank You! We had fun and it turned out awesome! ❤️🐞
Dude buy a decent 6" palm hand sander and a box of 180 & 320 grit for future use on projects and thank me later. Only hand sand areas you can reach with your sander, odd shapes or body lines. Yes it's different if your doing actual bodywork as far as what do by hand.
I don’t see us doing any more sanding on the Jeep. But thanks for watching and commenting 👍
You guys totally Rock! Buggy looks so amazing! I can't wait to see how the raptor liner holds up over time. Do you know if it will fade? I hope not cuz that black looks so perfect. I want to use this on XJET 😁 thanks for showcasing this stuff!
Project Dan H - Thank you! If it does fade, we’ll just paint it. So glad you’re using it on X-JET!!! 🤣 Love the name!! ❤️🐞
@@GoatOffroad haha.. it's pretty cool.. did you have to buy the spray gun too or was it included in a kit... What did the raptor liner come with?
Project Dan H - we got the kit that came with the gun, 4 bottles of Raptor and 1 bottle of hardner. We bought it off Amazon. Make sure the kit you buy comes with the gun; some don’t
@@GoatOffroad excellent tip bug! Thank you
Project Dan H - Boo wanted me to clarify- some kits have just the gun. Some have the gun with a regulator- Same Price! Look out for that!!! 👍
#relationship_goals
🥰🥰🥰
I have black diamond plate for mine down there. I would love to apply liner all over mine one of these days and have my plating over it
Black on black with 3 inch lift and 31s. Being a limited shes power windows and leather inside
Benjamin Smith - That sounds awesome!! I like the black on black!! ❤️🐞
@@GoatOffroad thank you, I hope you and your family have a merry Christmas
Benjamin Smith - Merry Christmas to y’all too!!! 🎄🎅🏻
Looks great!
Great video thank you!
gilbert arnold - Thank You!! ❤️🐞
I might just do my whole xj in that
Ryry K - I’d love to see that!
It’s a Bug’s Life well my xj is gone injectors went in it so I sold it bought a big truck again
Ryry K - Ford Truck? 😄
It’s a Bug’s Life Ford 250 king ranch I was gunna go with a 6.0 but I’d rather it not blow up lol
Ryry K - Sweet! I’ve been a Ford girl all my life 😁 I approve this message 🤣🤣
Success👍
What is ur dogs name ? Is he a lab?
Our dogs name is T. She’s a lab-pit mix 😄
How many times can you say “Bug”?
A P - not sure
So cool mam
👍👍👍
What’s isotopic alcohol?
Zil Co - just rubbing alcohol
I think he meant isopropyl...
Oh, Clearly. Lol.
Very nice. Boooo needs to quit smoking lol
David Diaz - we’re working on that too! 😄❤️❤️🐞
🤣🤣🤣🤣another awesome vid
Ahh, It'll look better with mu all over it. LOL
Dave Dennis - Yes! And there’s plenty of it here! 😄
oh my god that line is so crooked? don't do multiple sections of tape. run one stretch of tape the length of the panel. you guys seem like super cool people but it looks really bad. its cool you don't care really but other people might wanna know how to get a straight line. one piece of tape... perfect edge.
city demo - We tried our best. It was our first time. It looks really good today and in person
It looks fine also you’re supposed to use multiple strips
Subs lml
Tonkor Jeep XJ 1997 - Hey! What’s “lml” mean?
@@GoatOffroad xd 🤘
Tonkor Jeep XJ 1997 - Gotcha! I like it! 😄