If it has a aftermarket alarm on it, that’s how they will do a starter interrupt inside around the column area. Can’t tell you how many no starts I’ve solved over aftermarket alarms
@lowerclassfab431 any chance you can give me the dimensions of the c notches you made? I have 2x3 .025 wall tubing here and I want to make c notches for my hardbody.
Brother can you show the best way and how to set up the shockes and mounts I have a 91 chevy 1500 two wheel drive reg cab short step side bed with a 350 auto I have c notches and want to weld a round bar between the natches and 45deg my shocks but I’m not sure how to set them up. The right way dose the truck lay out on the frame or the bags or lay on the shocks pleas help me. Thanks for another great video Sorry I just reread what I wrote and fixed the words talk text and me don’t see eye to eye lol
If you check out Nelson’s build I show how we set up his rear shocks…also on the video where we put a Stepside bed on Dans Blue 88-98 silverado we have a clip where we put shocks on the rear…we always collapse the suspension and set the shocks up collapsed at that point…the suspension can’t go any higher so no need for shocks to have extra travel
@@lowerclassfab431 brother I’ve watch your Nelson’s build probably 200 times lol it’s a great build and very informative my shocks are going on the cross member bar my set up I a little different then that’s trucks I’ve watched the dans new bed episode I must have missed the shocks part I will watch it again I’m a big fan of your channel thank you for posting your videos i am going to get the infamous gas tank crossmember and the links that go back from there because of how good you made them look and I’m still trying to get some new a arms the ones that came with the truck were the strong arms brand and they were bent and I do t trust putting them back on I still have your number I hope to send you some pics of my progress soon
Here's another idea for the two link: use a crossbar to connect the two link bars together near the rear axle. According to the channel @temperbuilding , it is totally drivable on the streets. It even never had u joint problems allegedly. What do you think?
@dirkbmx9920 we’ve had pretty good results with them…what kind of negative results have you personally had on your vehicles with a 2 link besides pinion angle change?
I seen a image it said you guys will be ok when Biden shows up with his $700 like in Hawaii 😂 I feel bad for people that get fucked by the hurricane I'm from Houston we was broke af so we lived in the ghetto we flooded every year so we never had nice stuff
I've been bingee watching...but you totally need Lower Class Fab shirts that have something like "2 link the world!" on them. lol
Glad yall safe. We caught hell in Valdosta but we good
When you mentioned Jesup GA, all I could think about is how good the food at Jone's Kitchen is. Haven't been there in like 10years though lol
It’s still amazing….I ate there a few weeks
I’m glad y’all made it through the hurricane, it hit us in Douglas hard
If it has a aftermarket alarm on it, that’s how they will do a starter interrupt inside around the column area. Can’t tell you how many no starts I’ve solved over aftermarket alarms
Looks amazing brother. Nice work, you guys do great work 👍
Good work man, i love the content!
That is a bullet proof set up if done right. I just threw a rear end out that had that setup that I ran for years until I 4 linked it.
Looks great as always! Y’all stay safe
Love the channel, I’ve got 2 bagged s10 trucks. 88 & 98’
if you're keeping the front wheels, please, please add some spacers!
28:14 look at that! you need to space out the front wheels!
Love you work
I was wondering how much would this job run, I have the same year make and model of this truck?
Weird electrical things happen when welding directly to a chassis. I’m sure y’all disconnected the battery and all.
How much you’d charge for a body drop ?
@lowerclassfab431 any chance you can give me the dimensions of the c notches you made? I have 2x3 .025 wall tubing here and I want to make c notches for my hardbody.
Brother can you show the best way and how to set up the shockes and mounts I have a 91 chevy 1500 two wheel drive reg cab short step side bed with a 350 auto I have c notches and want to weld a round bar between the natches and 45deg my shocks but I’m not sure how to set them up. The right way dose the truck lay out on the frame or the bags or lay on the shocks pleas help me. Thanks for another great video
Sorry I just reread what I wrote and fixed the words talk text and me don’t see eye to eye lol
If you check out Nelson’s build I show how we set up his rear shocks…also on the video where we put a Stepside bed on Dans Blue 88-98 silverado we have a clip where we put shocks on the rear…we always collapse the suspension and set the shocks up collapsed at that point…the suspension can’t go any higher so no need for shocks to have extra travel
@@lowerclassfab431 brother I’ve watch your Nelson’s build probably 200 times lol it’s a great build and very informative my shocks are going on the cross member bar my set up I a little different then that’s trucks I’ve watched the dans new bed episode I must have missed the shocks part I will watch it again I’m a big fan of your channel thank you for posting your videos i am going to get the infamous gas tank crossmember and the links that go back from there because of how good you made them look and I’m still trying to get some new a arms the ones that came with the truck were the strong arms brand and they were bent and I do t trust putting them back on I still have your number I hope to send you some pics of my progress soon
@@lowerclassfab431 I was buying ekstensive metal shop equipment so that’s why my set is a little different
Here's another idea for the two link: use a crossbar to connect the two link bars together near the rear axle. According to the channel @temperbuilding , it is totally drivable on the streets. It even never had u joint problems allegedly. What do you think?
@dirkbmx9920 we’ve had pretty good results with them…what kind of negative results have you personally had on your vehicles with a 2 link besides pinion angle change?
@lowerclassfab431 I haven't had a two link, but I think body roll.
@nicki8731 quiet the opposite….2 links are stiff they don’t flex
Because.. minitruck.. dats why
I seen a image it said you guys will be ok when Biden shows up with his $700 like in Hawaii 😂 I feel bad for people that get fucked by the hurricane I'm from Houston we was broke af so we lived in the ghetto we flooded every year so we never had nice stuff