I have a 2015 chevy silverado 1500. I upgraded to the power fold mirrors puddle lights and turn signal, all work but the turn signal, I followed every bit of the install video and can't seem to figure out why the blinker is not working... Can you please help....
I own a 2017 GMC Sierra 1500 WT with power mirrors, windows and locks. I recently bought power folding mirrors with turn signal and puddle lights. I bought your wiring harness kit for the conversion. I installed it with the help from the video on RUclips, great video Thanks. After all my connections were made my drivers side window works But not my passenger side. Any ideas of what may be wrong? Thanks.... I also bought the wrong switch so i ordered the right one for the connector.
hey i bought the mirror and switch with the wiring harness from you guys and i installed them and they were good for about a week and suddenly the light stayed on when i have my drive lights on can you guys please help me
That's certainly not typical and should be a simple fix! Give our support team a call at 765-831-2830 or email support@boostautoparts.com and we will get to the bottom of this ASAP.
I have a question I have the DL3 power fold folding but instead of doing all of that wiring could I just go get different door cables and mirrors switches off a Silverado/sierra that already had power folding and puddle lights and put them in my 14 Silverado because there's a lot of part out trucks near where I live and I would like to know if that can be an alternative instead of doing all of that wiring thanks!
I imstall these on my 2018 silverado with power folding mirrors. Before install both mirrors would move up,down and sides. After install they dont move at all only the turn signal works.
Why are my puddle lights dim on my mirrors like you cannot tell they are even on but if u look they turn on but are really really dim could it be my mirrors or is it that I wired something wrong?
Hi just did this installation on my 2014 Chevy Silverado but the flood lights don't come on, was there something I missed?? I followed the instructions to the tee
i'm thinking about buying a new LT Silverado. Can you put power folding mirrors on it? I don't want to have to buy the High Country or LTZ version Silverado. Any thoughts on this? Thanks Lloyd
I have a 2018 regular cab and try this and didnt work it doesnt have power windows and i was trying to convert that too do u guys have a harness for this
I did this to my 14 1500. I was told it has to be connected to a computer to get the heated mirrors to work again. My passenger side heated mirror works but not my driver side. Do you k ow anything about this, or anyone else? And if so how do I go about asking the dealer to do this.
So if I just go to a salvage yard and pull the door harness from a truck that has the DL3 mirrors won't it work? Sense all your modifying is the door harness itself. I work at a salvage yard and we crush these trucks all the time. Mirrors are broken most of the time though.
No - the way the power adjust circuits operate are different between DL8 and DL3 so you have to use the DL8 harness or the power adjust won't work properly.
If you just swap the mirrors the lighting features will not work. To get the lighting features working you need to follow this video. If you try to swap DL3 harnesses to your DL8 truck, the lights will work but the power adjust won't (they're wired different for power adjust)... so that's why you need to modify your door harness with our kit following this video.@@user-nw6df5xw8h
I Have A 2015 Silverado And Want To Do This, But I Notice The Mirrors You Guys Sell Don’t Have The Blind Spot Glass. If I Buy Ones With It From Somewhere Else Would This Still Work? Also For The Wiring Harness What Does It Mean When It’s Asking For “2015 (WITHOUT MEMORY)” “2015 (WITH MEMORY)”? Will The Mirrors Fold By Themselves When I Lock The Truck?
The mirrors will not fold by themselves when locking the truck as that is part of the memory system. I'd recommend giving our team a call at 765-831-2830 to discuss with our team. They are best suited to know the nuances and give you the most accurate answer.
I have 2014 Silverado LT put LTZ mirrors on connected the wires like you instructed only the blinker works on the mirror pudal lights power mirror and and folding mirrors do not work. Please advise
Will your wire harness and switch kit work with any aftermarket mirror with power adjust/fold, turn and puddle light function or do I have to buy the mirror from you as well because I don't like the chrome on the mirror you offer.
Our harness/switch will work with our mirrors and OEM mirrors - some aftermarket mirrors are wired different than OEM so we cannot guarantee function on aftermarket mirrors not purchased from us.
This is a universal harness that is also used for towing mirrors which have a different feature set. The DL3 mirrors don't need the white wire, so that's why it's discarded.
Contact our support team at support@boostautoparts.com with your order number for assistance. Our technical support team is standing by ready to assist.
Is this can be done for 2015 tahoe originally not folding to make it folding mirror even by using aftermarket compatible folding mirror for same model ?
Sorry - this is not the same procedure for the SUV. We don't currently have an upgrade for the SUV but I'll share the interest with the development team.
Will this switch work on a 2020 silverado 1500 rst? I don't have power folding mirror switch. But if I got the switch would it still work with tow mirrors?
No, this is not applicable to the 2019+ new body style. We are working on a solution for those vehicles but there is currently not a power folding upgrade path at the time of writing this (3/7/22)
I have a 2017 Silverado LT and installed OEM power folding mirrors from a LTZ. I also installed the correct switch and your wire kit. The turn signal, puddle lights and heated mirrors work, but neither the power folding nor the mirrors work, also only the driver’s window works from the main switch. Please advise.
@@whittielockett7611 did that fuse blew immediately. Only thing I will say is I had purchased a switch but it had a notch in it that wasn’t on mine so I cut the notch off so the plug would fit. Did your plug fit correctly!?
Yes the fuse blew immediately I had the same issue after buying the wrong switch. There’s 2 switches available and if I’m not mistaken it’s the 2014-2020 Silverado Sierra Suburban Tahoe Power Folding Mirror Switch 84643953. After I ordered and installed the correct switch and replaced the fuse they worked fine. There’s a slight initial delay of a few seconds then they were fine.
Well....I bought your kit and successfully broke one of the connectors, don't ask..... you wouldn't believe me if I told you. Can you tell me what gauge connector this is?
I own a WT spec silverado, and it does not come with power windows, or power mirrors. I am however, interested in retrofitting the power optionals. Can the folding/puddle lighting be controlled by a non-oem switch instead of the door controls?
@@boostautoparts Thanks for the reply! I'd like to inquire further however! Can any of the functions be rewired to use external controllers? or is the entirity of the assembly reliant on the BCM?
You likely have the wrong power fold switch. If you bought it from us please email support@boostautoparts.com so we can get to the bottom of this and get the switch exchanged.
hey there I have a 2015 gmc sierra sle I installed power fold and door harnesses from 2019 silverado LTZ with proper mirror switch. I have turn, signals, heat and puddle lamps,only up and down on drivers mirror no movement on passenger side .power fold on neither one.will this kit work for me? Thanks Daryl.
You cannot take the harnesses from an LTZ and install them into an SLE. You need to revert back to your old harnesses, install our kit, and then everything should work.
Hello, good evening, I bought this cable kit, I installed it on a 2018 Silverado Z71 LT, the pins fit well, the power mirror turn signals worked well, but the power mirrors do not work or do I have to install the white cable or does it have a fuse in the fuse box
I'm trading 2017 silverado DL8 to 2017 sierra with DPN mirrors. No fold nothing fancy. Can door harnesses be swapped rather than adding wires to my existing DL8 door harness? Any input can help
Please reach out to our team at sales@boostautoparts.com with the VIN of both trucks and they can check. Important to note that this is talking about upgrade to DL3 which is not what you're referencing.
There's an additional supplemental install required for 2014's to get the puddle light working. Email support@boostautoparts.com for assistance and they'll get you squared away.
Is there a way you can provide me a link to the door switch you sell. I try to look for it on your site but I can’t seem to find it. I have already purchased two different switches and they do not work at all. I have a 2016 Silverado LT I have already installed the mirrors and the turn signals work and the puddle light I just can’t seem to purchase the correct switch.
Here you go! Call our team at 765-831-2830 with any questions. boostautoparts.com/products/gm-power-fold-switch-for-dl3-dpn-dqs-mirrors-silverado-sierra-2014-2019
Anything for an 08 silverado LT ? I went from dl8 power adjustable and heated mirror to a dl3 on truck everything works but powerfold, auto laptop dim and puddle lamps have adjustability heated mirror glass and turn signal
@@eddieordaz3426 That is not used for this installation, this a harness that is used for numerous different applications and that specific video clip was simply reused. You won't see it referenced anywhere else in this video. Feel free to call our tech support team to discuss at 765-831-2830
@@boostautoparts I have a 2014 GMC Sierra 2500HD Denali Diesel without power folding tow mirrors, will this work for my vehicle? I know I will need door switches and upgraded power fold mirrors. I ask because that year and particular model is not mentioned at the beginning of the video. Thank you.
This harness is a universal harness that is also used for towing mirror upgrades, so the white wire is only used on the towing mirrors. You can NOT use a switch out of a Suburban - it must be the proper switch for the vehicle.
I purchased new power fold mirror for my 2014 Silverado i install the mirror and the wire harness off a truck with power fold mirror do i need to modify the harness to make the puddle light work as well ? The turn signals work but just not the power fold or puddle light
@@boostautoparts i bought the kit and install them as shown in the video my turn signals work and i can adjust my mirrors what do i need to activate the puddle lights
Link to product: boostautoparts.com/pages/gm-dl3-upgrade-instructions?GM+2015%2B+DL8+to+DL3+Modify+Install&Comment&RUclips
I have a 2015 chevy silverado 1500. I upgraded to the power fold mirrors puddle lights and turn signal, all work but the turn signal, I followed every bit of the install video and can't seem to figure out why the blinker is not working... Can you please help....
Give our support team a call at 765-831-2830; we are here to help!
The puddle lights only works when unlock the truck,2015 gmc sierra sle
That is correct - they only come on at night when unlocking the truck.
I own a 2017 GMC Sierra 1500 WT with power mirrors, windows and locks. I recently bought power folding mirrors with turn signal and puddle lights. I bought your wiring harness kit for the conversion. I installed it with the help from the video on RUclips, great video Thanks. After all my connections were made my drivers side window works But not my passenger side. Any ideas of what may be wrong? Thanks.... I also bought the wrong switch so i ordered the right one for the connector.
Our team is well suited to assist with this. Give our tech support team a call at 765-831-2830 or email support@boostautoparts.com for assistance!
hey i bought the mirror and switch with the wiring harness from you guys and i installed them and they were good for about a week and suddenly the light stayed on when i have my drive lights on can you guys please help me
That's certainly not typical and should be a simple fix! Give our support team a call at 765-831-2830 or email support@boostautoparts.com and we will get to the bottom of this ASAP.
I have a question I have the DL3 power fold folding but instead of doing all of that wiring could I just go get different door cables and mirrors switches off a Silverado/sierra that already had power folding and puddle lights and put them in my 14 Silverado because there's a lot of part out trucks near where I live and I would like to know if that can be an alternative instead of doing all of that wiring thanks!
No - that won't work. The harnesses are wired differently from DL8 to DL3 - it's not just the lighting that's different.
I imstall these on my 2018 silverado with power folding mirrors. Before install both mirrors would move up,down and sides. After install they dont move at all only the turn signal works.
That's certainly not typical. Shoot a video to our support team at support@boostautoparts.com and we will work to get this resolved ASAP.
Mine do the same thing did you find a solution?
Can I put these on my 16 Silverado single cab lt,it already has power mirrors
Yes - though the puddle light might not work you can gain power fold and signal for sure.
@@boostautopartswhy wouldn’t the puddle lights work? On the 16?
@@E12_Tabz Some of them aren't wired; give our team a call at 765-831-2830 for assistance
why doesnt my puddle light work? everything else works fine just not the puddle light
Please email support@boostautoparts.com . There is a known truck side issue for some 2014 vehicle.
figure it out? i installed mine same thing everything works except puddle light
will this work for my 2015 sierra single cab? its an sle model and i just installed these mirrors, power works but no turn signal or bottom light
Yes
Why are my puddle lights dim on my mirrors like you cannot tell they are even on but if u look they turn on but are really really dim could it be my mirrors or is it that I wired something wrong?
Likely a vehicle side issue that our team can assist with resolving - please give our support team a call at 765-831-2830
When I connected the switch, it immediately burned the 10 amp fuse? Do i have to upgrade the fuse?
Absolutely not. Sounds like you have the wrong switch - did you order from us? If you install the wrong switch that will happen.
Hi just did this installation on my 2014 Chevy Silverado but the flood lights don't come on, was there something I missed?? I followed the instructions to the tee
Please reach out to our support team at support@boostautoparts.com for assistance.
i'm thinking about buying a new LT Silverado. Can you put power folding mirrors on it? I don't want to have to buy the High Country or LTZ version Silverado. Any thoughts on this?
Thanks
Lloyd
Yes - that is exactly what this video is showing. You can also upgrade to power folding tow mirrors if you wish (separate video we have)
@@robertcampbell5879 Not at this time (1/3/22)
I wanna do this to my 2017 z71
Not a bad install, very straightforward!
So the harness inside the cab has all the terminals? For all the options?
Yes
I have a 2018 regular cab and try this and didnt work it doesnt have power windows and i was trying to convert that too do u guys have a harness for this
Sorry, we do not. This requires you have factory power mirrors to work and this simply gains the turn signal, puddle light, and power fold.
This installation can be applied for Silverado 219(the new style)
This will not work on new body trucks. This applies to 2014-2018 1500's and 2015-2019 2500/3500's.
I did this to my 14 1500. I was told it has to be connected to a computer to get the heated mirrors to work again. My passenger side heated mirror works but not my driver side. Do you k ow anything about this, or anyone else? And if so how do I go about asking the dealer to do this.
The defrost should work plug and play.
My truck already has cables in those spaces, should they be cut or what should be done in those cases?
Sounds like you've got a unique situation. I'd recommend calling our team at 765-831-2830 for assistance. Be sure to have your VIN handy.
What is the white wire really for ??
Nothing for this install. This is a shared harness with the towing mirror and that wire is used for the towing mirror but not the small mirrors.
So if I just go to a salvage yard and pull the door harness from a truck that has the DL3 mirrors won't it work? Sense all your modifying is the door harness itself. I work at a salvage yard and we crush these trucks all the time. Mirrors are broken most of the time though.
No - the way the power adjust circuits operate are different between DL8 and DL3 so you have to use the DL8 harness or the power adjust won't work properly.
Lmk as well. I heard they work through bcm
@@boostautoparts so if u put the oem mirrors on you must have the dl3 harness??
If you just swap the mirrors the lighting features will not work. To get the lighting features working you need to follow this video. If you try to swap DL3 harnesses to your DL8 truck, the lights will work but the power adjust won't (they're wired different for power adjust)... so that's why you need to modify your door harness with our kit following this video.@@user-nw6df5xw8h
Damn, where are you located? Hook it up with some Silverado parts
I Have A 2015 Silverado And Want To Do This, But I Notice The Mirrors You Guys Sell Don’t Have The Blind Spot Glass. If I Buy Ones With It From Somewhere Else Would This Still Work?
Also For The Wiring Harness What Does It Mean When It’s Asking For “2015 (WITHOUT MEMORY)” “2015 (WITH MEMORY)”?
Will The Mirrors Fold By Themselves When I Lock The Truck?
The mirrors will not fold by themselves when locking the truck as that is part of the memory system.
I'd recommend giving our team a call at 765-831-2830 to discuss with our team. They are best suited to know the nuances and give you the most accurate answer.
How does the heated mirror work??
Comes on with the rear window defrost.
I have 2014 Silverado LT put LTZ mirrors on connected the wires like you instructed only the blinker works on the mirror pudal lights power mirror and and folding mirrors do not work. Please advise
Please email your VIN to support@boostautoparts.com along with your order number and our tech support team will get it resolved ASAP
Need these for my 2023 !!
Coming soon.
Omg i meant 2013 wow
I need this wiring but for a 15 tahoe ls to upgrade to a turn signal mirror w/ puddle light 🥺
Unfortunately we don't currently have an upgrade path for the SUV's
What special tool do I use if I got one of the wires pins in the wrong slot and it’s locked in place?
Reach out to our team at support@boostautoparts.com for assistance with this.
Does Boost Auto offer any solutions like this for a 10th gen Suburban? (‘07-‘14)
Not at this time - I will let the development team know of the interest.
Will your wire harness and switch kit work with any aftermarket mirror with power adjust/fold, turn and puddle light function or do I have to buy the mirror from you as well because I don't like the chrome on the mirror you offer.
Our harness/switch will work with our mirrors and OEM mirrors - some aftermarket mirrors are wired different than OEM so we cannot guarantee function on aftermarket mirrors not purchased from us.
what is the white wire for?
This is a universal harness that is also used for towing mirrors which have a different feature set. The DL3 mirrors don't need the white wire, so that's why it's discarded.
bought the wiring setup for the Dl3 and puddle light does not come on for some reason
Some 2014/2015 trucks require an additional jumper for puddle. Reach out to our support team at support@boostautoparts.com for assistance.
Slot 41 what is it for and slot 3? I want to know which one is for the turn signal mirror Bcs that’s the only one I need please respond.
Contact our support team at support@boostautoparts.com with your order number for assistance. Our technical support team is standing by ready to assist.
I have a 2015 silverado single cab , will i need to change the wires for the cable connector on the side mirrors? Or just plug in play
You need to do this wiring modification.
I wanna order the harness but what’s the difference between the 2014 and the 2015 harness only asking because of the price difference
2014 trucks require a bit more wiring to get the puddle light working.
Could I use this kit for 2015 tahoe ?
We don't have anything for a Tahoe at this time - sorry!
Can you not just buy the door harness instead?
Swapping the door harness off of an SUV originally with DL3 will NOT work. The electrical configuration for other mirror functions is not the same.
i have a 2015 chevy and my turn signal work but not my puddle lights plz help
Please reach out to our team at support@boostautoparts.com and we will assist in resolving this ASAP!
I installed the kit on my truck but my puddle lights aren’t working would you know why?
All 2014 and some 2015's require an additional jumper for puddle light. Please email support@boostautoparts.com for further guidance
If I buy the mirrors from you guys are they able to work with heated mirrors too if the truck already has that option?
Yes, our mirrors are equipped with heaters.
I have regular side mirrors… will this work if i just swap out the side mirror or do i have to do extra?
You will need to do this wiring harness
Is this can be done for 2015 tahoe originally not folding to make it folding mirror even by using aftermarket compatible folding mirror for same model ?
This is NOT relevant for the SUV's - only the full size trucks. The wiring is different on the SUV's.
Do the mirrors will fold once your turn off the engine or do you need to change it in the settings section in your screen?
The only way to fold the mirrors will be with the new switch that you install.
What are the size/type of pin connectors used on the wires?
They can be purchased here: boostautoparts.com/pages/gm-dl3-upgrade-instructions?GM+2015%2B+DL8+to+DL3+Modify+Install&Comment&RUclips
would the turn signal function work if i still have dl8 mirrors body but dl3 turn signal glass with this wiring upgrade?
No - the DL8 mirrors do not have provisions for turn signal.
So would this video work on a 2017 Tahoe. Are the same pin outs used??
Sorry - this is not the same procedure for the SUV. We don't currently have an upgrade for the SUV but I'll share the interest with the development team.
So do you replace the mirror switch if you don't already have power folding mirrors?nevermind I see it on the website
Yes, to gain the powerfold you will have to replace the switch.
Will this switch work on a 2020 silverado 1500 rst? I don't have power folding mirror switch. But if I got the switch would it still work with tow mirrors?
No, this is not applicable to the 2019+ new body style. We are working on a solution for those vehicles but there is currently not a power folding upgrade path at the time of writing this (3/7/22)
Is slot 2 for the running light?
No - slot 2 is not utilized for the upgrade to DL3 power fold.
@@robcj3189 If you purchase the harness you can reach out to support@boostautoparts.com for assistance
I have a 2017 Silverado LT and installed OEM power folding mirrors from a LTZ. I also installed the correct switch and your wire kit. The turn signal, puddle lights and heated mirrors work, but neither the power folding nor the mirrors work, also only the driver’s window works from the main switch. Please advise.
Please email support@boostautoparts.com - our tech support team to get to the bottom of this right away.
I am having the same problem I just emailed support just wondering what you were told to do.
@@rkeondre replace the 10a fuse (power mirror) in the drivers side fuse panel and you should be good to go.
@@whittielockett7611 did that fuse blew immediately. Only thing I will say is I had purchased a switch but it had a notch in it that wasn’t on mine so I cut the notch off so the plug would fit. Did your plug fit correctly!?
Yes the fuse blew immediately I had the same issue after buying the wrong switch. There’s 2 switches available and if I’m not mistaken it’s the 2014-2020 Silverado Sierra Suburban Tahoe Power Folding Mirror Switch 84643953. After I ordered and installed the correct switch and replaced the fuse they worked fine. There’s a slight initial delay of a few seconds then they were fine.
Well....I bought your kit and successfully broke one of the connectors, don't ask..... you wouldn't believe me if I told you. Can you tell me what gauge connector this is?
Reach out to our team at support@boostautoparts.com for assistance
I own a WT spec silverado, and it does not come with power windows, or power mirrors. I am however, interested in retrofitting the power optionals. Can the folding/puddle lighting be controlled by a non-oem switch instead of the door controls?
Unfortunately we don't support any upgrades on vehicles that don't have power mirrors from factory. Sorry about that!
@@boostautoparts Thanks for the reply! I'd like to inquire further however! Can any of the functions be rewired to use external controllers? or is the entirity of the assembly reliant on the BCM?
@@DaWalkDude give our team a call at 765-831-2830, they are best suited to advise.
When I insert the power folding switch it keeps blowing the mirror fuse what may be cause?
You likely have the wrong power fold switch. If you bought it from us please email support@boostautoparts.com so we can get to the bottom of this and get the switch exchanged.
hey there I have a 2015 gmc sierra sle I installed power fold and door harnesses from 2019 silverado LTZ with proper mirror switch.
I have turn, signals, heat and puddle lamps,only up and down on drivers mirror no movement on passenger side .power fold on neither one.will this kit work for me?
Thanks Daryl.
You cannot take the harnesses from an LTZ and install them into an SLE. You need to revert back to your old harnesses, install our kit, and then everything should work.
@@boostautoparts Thanks I figured that! Sounds good.
Hello I'm looking for fuse on mirrors they won't turn and switch is not on any help please
Give our team a call 765-831-2830
Whats the part number or where to buy
You can check them out here: boostautoparts.com/pages/gm-dl3-upgrade-instructions?GM+2015%2B+DL8+to+DL3+Modify+Install&Comment&RUclips
It would be the same procedure for a 2018 Silverado LT truck.
Yes
Ok thanks
Hello, good evening, I bought this cable kit, I installed it on a 2018 Silverado Z71 LT, the pins fit well, the power mirror turn signals worked well, but the power mirrors do not work or do I have to install the white cable or does it have a fuse in the fuse box
My master switch no longer lights up at night when I'm driving it and I can't lower the right window from my driver door either.
That's certainly not typical - give our team a call at 765-831-2830 and they will get this diagnosed and resolved with you ASAP@@JoseContreras-sy5in
I have a 2015 Tahoe LS. They seem almost exactly the same as the Silverado’s. This harness will work for my SUV?
Unfortunately this procedure does not work for the SUV's. We are working on a separate upgrade path.
@@boostautoparts I will be on the look out for the update. Thanks 🙏🏾
Do you guys have an update
@@50davidlh
Did you work on this let me know if it works thanks
Unrelated but can do you think one can replace the Corvette C8 mirrors to add folding mirrors?
Unfortunately we aren't sure on those mirrors at this time
@@boostautoparts Interested buyer here, please keep me updated!
Is there a way to add reverse tilt to the mirrors
Unfortunately not.
Just installed mine but the puddle stays on
It sounds like the wire in pin 1 may be installed wrong. Email support@boostautoparts.com for guidance
Wil these work on a 2020 if not do you have a link so I can get the right harness
These will not work on a 2020. At this time we do not have an upgrade out yet for the 2020+ trucks.
Puddle light doesn’t turn on
Where you able to figure this out? Want to make sure it works before I buy.
Reach out to support@boostautoparts.com and our team will assist!
have you found out yet? my puddle light dont work either
@@nicktarius no
@@DiegoGonzalez-sq3kd bruh
I'm trading 2017 silverado DL8 to 2017 sierra with DPN mirrors. No fold nothing fancy. Can door harnesses be swapped rather than adding wires to my existing DL8 door harness? Any input can help
Please reach out to our team at sales@boostautoparts.com with the VIN of both trucks and they can check. Important to note that this is talking about upgrade to DL3 which is not what you're referencing.
Can do this on a work truck ?
Must at least have power adjust mirrors.
Why don't they have anything 😕 for 07-13 Gm truck's
I'll let the development team know of the interest!
My puddle lights didn't work on my 2014 silverado
There's an additional supplemental install required for 2014's to get the puddle light working. Email support@boostautoparts.com for assistance and they'll get you squared away.
same thing happen to me
Is there a way you can provide me a link to the door switch you sell. I try to look for it on your site but I can’t seem to find it.
I have already purchased two different switches and they do not work at all.
I have a 2016 Silverado LT I have already installed the mirrors and the turn signals work and the puddle light I just can’t seem to purchase the correct switch.
Here you go! Call our team at 765-831-2830 with any questions.
boostautoparts.com/products/gm-power-fold-switch-for-dl3-dpn-dqs-mirrors-silverado-sierra-2014-2019
@@boostautoparts I purchased the switch and just installed it, it still doesn’t work and I followed the video provided.
@@ernestotijerinajr.1690 Call our tech support team at 765-831-2830 they are well versed and will assist.
@@ernestotijerinajr.1690 I have the same problem what solution did they give you. Just wondering before I call tech support.
Do they work for a 2019 Tahoe Lt
Sorry, they don't work on Tahoe's.
Everything works but the lights underneath the mirror not work
Some 2014/2015 trucks require an additional jumper for puddle. Reach out to our support team at support@boostautoparts.com for assistance.
I have a 2018 Silverado
@@stevenarmilla9996 Should be working. Reach out to our support team for assistance and they'll get to the bottom of it with you.
Where does the white wire from your kit go?
The white wire from our kit is NOT utilized for this application. You can discard it.
Will this work on a 2018 Chevy suburban LS
We do not currently have an upgrade path for the 2015-2020 SUV's, but I will share the interest with the development team.
@@boostautoparts thank you
where do i put the white wire?
White wire isn't used for this install.
Anything for an 08 silverado LT ? I went from dl8 power adjustable and heated mirror to a dl3 on truck everything works but powerfold, auto laptop dim and puddle lamps have adjustability heated mirror glass and turn signal
We don't currently have anything for an 08 Silverado, but we will share the interest with the development team for future consideration!
What number is the white wire connected in ?
White wire isn't used for this install.
What’s the white wire @8:07 for then ?
@@eddieordaz3426 That is not used for this installation, this a harness that is used for numerous different applications and that specific video clip was simply reused. You won't see it referenced anywhere else in this video. Feel free to call our tech support team to discuss at 765-831-2830
Will this product work with 07-13 Silverados?
Unfortunately not - at this time we just have it for the 14-18 Silverado/Sierra trucks.
@@boostautoparts I have a 2014 GMC Sierra 2500HD Denali Diesel without power folding tow mirrors, will this work for my vehicle? I know I will need door switches and upgraded power fold mirrors. I ask because that year and particular model is not mentioned at the beginning of the video. Thank you.
@@knmart76 This does NOT work for 2014 2500/3500 trucks, only the newer body trucks which in 2014 are 1500's only.
@@boostautoparts thank you so much.
@@knmart76 No problem, I'll let the development team know of the interest!
What's the whitr wire for?
This is a universal harness that is used for towing mirrors and non-towing mirrors. In the non-towing mirror application the white wire is not used.
@@boostautoparts ok and if i want the auto dimming on the driver's mirror do i have to run extra wire?
@@luisperez-xd5mo We do not have an upgrade path for the auto dim at this time.
We’re u wire the Puddle Light
The white wire in this kit is for the puddle light
We’re u put that wire
@@jrr5127 It gets installed in the video
Is not
@@jrr5127 Contact our support team at 765-831-2830 for further assistance
Quick question, will i be able to fold my mirrors without having the key in the ignition?
You should be able to fold the mirrors with the key in or out of the ignition.
Where do you location
Link to product: boostautoparts.com/products/dl8-dl3?GM%202015%2B%20DL8%20to%20DL3%20Modify%20Install&Comment&RUclips
Im looking to do this to my 09 sierra as one of my mirrors is broken. do you by chance have a video and wiring for that?
We do not currently have an upgrade for a 2009 Sierra
Some of our products want to cooperate with you, how should we contact you on instagram?
Email sales@boostautoparts.com
What is the white wire for? i install these on a 2018 silverado do I need the switch of a truck or would a suburban switch work?
This harness is a universal harness that is also used for towing mirror upgrades, so the white wire is only used on the towing mirrors.
You can NOT use a switch out of a Suburban - it must be the proper switch for the vehicle.
I purchased new power fold mirror for my 2014 Silverado i install the mirror and the wire harness off a truck with power fold mirror do i need to modify the harness to make the puddle light work as well ? The turn signals work but just not the power fold or puddle light
You can't swap door harnesses with other trucks - other features aren't compatible. Reach out to our team at sales@boostautoparts.com for guidance.
@@boostautoparts i bought the kit and install them as shown in the video my turn signals work and i can adjust my mirrors what do i need to activate the puddle lights
@@gamalielpelayo2891 Puddle lights should be working. Reach out to our team at support@boostautoparts.com for assistance.
I just got the harness I stall it on my sierra 2015 and the puddle lights aren't working neither, I used to have DL8 I switched over for DL3.
@@rogelioortega2194 Puddle lights should be working. Reach out to our team at support@boostautoparts.com for assistance.