Convert legacy to UEFI windows 10 without data loss || legacy BIOS to UEFI without data loss
HTML-код
- Опубликовано: 10 сен 2019
- In this video I'll convert legacy to UEFI windows 10 without data loss. Legacy BIOS to UEFI conversion is done using GPTGEN tool. Converting legacy to UEFI can be done with inbuilt tool also, but for using that tool your PC must satisfy some conditions, and inbuilt tool doesn't work every time, so as an alternative you can use this method.
--------------------
TEXT INSTRUCTIONS:-
--------------------
1) First download GPTGEN From the below link
sourceforge.net/projects/gptgen/
2) Now extract it and go inside the folder and copy the location
3) Now open CMD As administrator and type "CD (paste the copied location)" and hit enter
4) Now type "GPTGEN -w \\.\physicaldrive#" (Where "#" is the disk number in which your C: Drive is present) & hit enter
5) Now type "y" and hit enter
6) Type "exit" and hit enter
7) Download RUFUS From the below link
rufus.ie/
8) Open RUFUS as administrator
9) Select your USB Drive
10) Then click on "Select" and select windows 10 ISO File
11) Now Press "ALT + E" to enable Dual UEFI / BIOS Mode in RUFUS
12) Now select MBR below partition scheme and then select FAT32 below file system and then click on start, wait until this gets completed.
13) click on close after it gets completed and then restart your computer
14) Now go into your BIOS and look for option like "Legacy" and then change it to "UEFI" (You can use keys like F2, ESC, Del, to enter into your BIOS which works most of the time)
15) Then boot up your USB
16) Now click on "NEXT". then click on "REPAIR YOUR COMPUTER" and now click on "TROUBLESHOOT" and then click on "COMMAND PROMPT"
17) Type "DISKPART" and hit enter
18) Type "LIS DISK" and hit enter
19) Now you have to select appropriate disk type "SEL DISK #" (Replace # with the disk number which you used in step 4 i.e the disk number in which your c: drive is present)"
20) Type "LIS PAR" and hit enter
21) Type "SEL PAR 1" and hit enter
22) Type "DEL PAR" and hit enter
23) Type "CREATE PAR EFI" and hit enter
24) Type "FORMAT FS=FAT32 QUICK" and hit enter
25) Type "ASSIGN LETTER=M:" and hit enter
26) Type "EXIT" and hit enter
27) Type "NOTEPAD" and hit enter and then go to "FILE", then click on "SAVE AS", and then click on "THIS PC" and find out your C: Drive letter (D: in Most Cases)
28) Type "BCDBOOT (YOUR C: DRIVE LETTER):\WINDOWS /S M: /F ALL" and hit enter
29) Type "EXIT" and hit enter, and then click on "TURN OFF PC"
30) Now turn on your PC, windows should have been converted to UEFI Now.
That's it guys.... Thanks for watching...If you find this content helpful consider subscribing to our channel...Bye
Subscribe us:
bit.ly/Subscribe-fandD Хобби
Hello. At what point would I stop and boot under the newer computer that uses UEFI? After I make the USB drive? I'm currently on the "Legacy" computer and want to make my SSD with Windows boot on the newer "UEFI" computer. Or do I wait until the very end of the steps on the "Legacy" PC??
if I used a non-UEFI windows bootable usb to execute those commands in still, legacy BIOS, will it boot in UEFI if I set it up after executing those commands?
You're awesome! This really help me out a lot. I've been searching online for the last couple hours and you saved the day!!!
same here
I attempted this and was all the way to DISKPART> format fs=fat32 quick and ran into the following message keeping me from proceeding. Virtual Disk Service error: The volume size is too big. I tried format fs=ntfs and it says 0 Percent completed. How long will this take?
Will this work with Windows 10 Media Creation Tool instead of .iso? Because when I go to the official MS Windows 10 iso site, it redirects me to Windows 10 Media Creation Tool instead.
I want to ask, is it possible to make the "Secure Boot" to be Enabled after convert BIOS to UEFI???
I'd like to know this too!
@Tech Guides mine is Lenovo, i don't find Secure Boot in BIOS as it says in System Information as Unsupported
Windows 11😂😂
@@deadender2645 Yep 😂😂
Hi my mobo is very old and i bought a new ssd and it dosent want to boot from the ssd, in bios i have boot options raid and efi, this might help me to boot succesfully from ssd?
Question: will out graphics card work properly after the transformation
Help!!!:When I type gptgen -w physical drive command it says unable to determine the block size of the disk please enter the block size by hand to continue
Awesome stuff man, needed this. Glad for the very straight forward tutorial!
I did this haldway and when i started my pc i got the “reboot and select proper boot device or insert boot media in selected boot device and press a key” and now i am unable to use my pc
Format fs=fat32 quick command not working because the volume size is too big. What is next ?
It worked perfectly, thank you!
Question : I must have a USB drive with windows in it?
May I use a random USB with nothing in it.? Please explain the things I need to successfully do this.
You need to create a Bootable Windows 10 USB
I have windows 7 non UEFI(bios) bootable iso
How to convert that iso to UEFI
Bro my laptop kinda slowed down after converting to GPT/UEFI..and there is further another disk listed as disk1 in my laptop that says "Portable Base Layer" taking around 8gb of space. Do I need to convert that too to GPT and UEFI as it currently shows MBR (which may be the reason for slowing down)? Kindly note that my sell latitude laptop has only one hard disk. Please help
portable base layer may be a USB device and AFAIK converting to UEFI will not result in slow speeds. Thanks for your feedback
is it a problem if we create windows flash drive with file system in rufus as NTFS
Thanks man! Complicated but works perfectly!
Thanks for your feedback.
Help!!!:When I type gptgen -w physical drive command it says unable to determine the block size of the disk please enter the block size by hand to continue
This worked thank u dude.I tried so many things from forums,youtube,reddit but only this worked thank u very much.U have my like
I tried, but got gptgen is not not recognized as an internal command or external command, operable program or batch file
Now I boot my PC and it goes directly to bios. Can’t get my windows to launch. Where did I go wrong?
Also, in Step 24, if FAT32 was not an option in Rusfus do we type NTFS instead of FAT32? Thanks!
You can use NTFS also But FAT32 is compatible with older PC's too and that's why I used FAT32
It worked - thank you! My PC start up time is so much faster now!!
will this still work now? and what exactly do i need to download into the usb?
At first in cmd when i wrote command pc instally said your device ran into a problem.......and shut down
Hello bro i am getting error please enter the block size by hand to continue and After typing 512 an another error showing block read failed
After "format fs=fat32 quick", mine says virtual disk service error:
The volume size is too big.
What shout I do???
Can you tell me the size of partition 1?
Change fat32 to ntfs
My partition is 111Gb
What to do?
@@MrCaptainsm97 lmao
Hi, I've been an old-school techie since 1986 and all this new-fangled technology REALLY confuses me..... I want to convert a new 4TB HDD from MBR to GPT so I can use the full 4TB capacity of my new HDD. I also want to re-install Windows 7 OS (64-bit) on this HDD. My current Intel-DH67BL motherboard supports UEFI but it is currently set to legacy BIOS mode because till date I was using 4x 2TB HDDs in my PC case. Now my existing of storage is filled, and I presently need 4x 4TB HDDs (yes, 16TB) for storing my 4K photographs. Can you please MAKE A VIDEO that explains this process of conversion for newbies like me? Perhaps someone can please point me to some videos that explain this BIOS-->UEFI and MBR-->GPT process? I am sure it will help me and thousands of other users who have older Core i5 systems BUT they need 4TB or higher capacity drives to store large volumes of data like me...... NOTE: I can easily buy a Samsung 860 EVO 500GB SSD to use just as a system disk (OS only) with the OS, Primary, system, boot, page-file & dump on that disk itself.... while I can use separate 4TB SATA mechanical HDDs for all my installed Programs, Documents, Media, Data etc (I have 4 bays for 3.5 inch HDDs).
What is the meaning of "15) Then boot up your USB". Should we insert USB which has windows installation file in it???
Yes. Insert a Bootable USB
@@fDFerozDaniel I don't have pendrive (USB) which has windows 10 installation file. Long back I installed windows 7 or 8 (I forgot) from a CD and afer that I upgraded to windows 10. Unfortunately, I lost that CD also. Please guide me.
You need a installation media bro (Windows 7/8/8.1/10) CD/DVD/USB flash drive
@@fDFerozDaniel 1. Now in my laptop I am using windows 10 64bit already. (First I installed 7 or 8 & upgraded to 10 )
2. But in my bootable pendrive I have WINDOWS 7 SP1 x64 ENTERPRISE MINI
3. May I use this pendrive as installation media???
I tried this but there's no way to enter to my system
The problem is about the my data
Would it be deleted or not affected
Your data will be safe until you follow the instructions properly
help!!
Boot: 0, Type: 0x42, Start: sector 63, Length: 1985 sectors
FATAL: Dynamic disk detected. Support for dynamic disks is
not yet implemented. Writing a GPT to a dynamic disk is
dangerous. Operation aborted.
now what 2 do...
First You have to convert your disk from dynamic to basic
Google how to convert dynamic to basic without data loss
Does i need download window iso please reply does it work without iso I have update to 20h2 does it works
Bro mere paas dell latitude e5430 vpro laptop hai usme bios me graphics settings kaise change krte hai change Nhi hora
After entering "GPTGEN -w \\.\physicaldrive1" (1 is my C:OS) it says there is not enough space at the beginning of the disk. Not sure how to fix this.
Shrink anyone of your partition to 500 Mb and then trt
@@fDFerozDaniel Still no luck unfortunately
what do you do if you press device and you have nothing?
i don't have windows 10 iso, should i download it?
How did you just spawn a .iso file? There is no for me
I accidently shut down my pc after the commant prompt step and now my pc isn't starting, what should i do😭😭🎈
bhai eror no boot disk has been detected or the disk has failded bata raha hai ky karu bhai please bata do
i cant find the win10_1903 where can i find it?
Thank you! It worked perfectly for my pc and laptop :)
Thanks for your feedback
I did the first 6 steps of this, and decided ultimately to not do it. Now my computer will not boot. I’ve been working on my pc for 5 hours now. What should I do?
“reboot and select proper boot device” is what I keep getting now. Not sure how to fix it
if you are going in no point going back, keep going in further ;)
Thanks bro you are brilliant keep it up it really works very well I gave u like from my 15 ids thanks
😲😲15 ID'S 😂🤣😂🤣😂🤣😂🤣😂 thanks bro
I attempted this and was all the way to DISKPART> format fs=fat32 quick and ran into the following message keeping me from proceeding. Virtual Disk Service error: The volume size is too big. Do you have a fix for this problem or do I have to reload windows and all programs with a new clean install? Windows 10 was loaded onto a 2.0 TB WD SSD and when installed it somehow was set to legacy mode instead of UEFI. This made NO partitions on the drive only making one NFTS C drive across the full SSD. No recovery partition, no EFI System Partition and the hidden partition. Only D that says Healthy (System, Boot, Crash Dump, Primary Partition) and the windows was in legacy mode. I run large TB drives and was working on another issue when I realized that windows was in legacy mode instead of UEFI so I currently am in the middle of your youtube video trying to salvage 2 days of work instead of having to reload everything. Any ideas?
Then type format fs=ntfs. Make sure that you format the correct drive
@@fDFerozDaniel that didn’t work either
I am getting error unable to assign a drive letter when downloading Rufus
Hello, i decided to not doing this process after gptgen step and now my laptop booting at error pxe e61 can u help me how to bring it back to normal again?
I have no rufus installed on my FDD yet
Says volume size is too small, ntfs doesn’t work either, help
Hii I’m having truble in the rufus. When i got to change from NTFS to FAT32 it only gives me the option to choose NTFS. What should i do? Thanks
I selcted ntfs and did everything else like you said and it worked thank you so much 🤘
Thanks for your feedback
Bro in first command Im getting syntax is incorrect. Plz help
It worked! Thank you so much!
Thnks for your feedback 😀
HEY BRO , when i enter the GPTGEN -w \\.\physicaldrive0 my c drive is in disk 0 so i entered 0 it says no space at the beginning of the drive ...please help
Ok. resize your c: drive and then try
@@fDFerozDaniel ok bro thanks now it works
Can I use windows 8 iso instead of windows 10
Last one shows faliure to copy boot files what i do
hey, no usb is showing in the rufus device on drive properties.. what do i do?
Unplug it and then plug it in again
can i use dvd instead of bootable usb!
Hello bro can we just install new windows i dont have data to save or anything like that plz reply
Yeah you can install new Windows
On my bios there its no boot mode?
Thank you this worked for me
I can now active vt-x
Thanks for your feedback. 😁😁
3:23 I can't find this,,please help me
Bro, after i done all and turn off computer. Then it turned on and opened usb as boot. But, when I removed the usb and tried, it said no boot drive detected. What can I do?
Also, tried to install windows, but it showed Cannot install windows, the partition is GPT. How can I fix it.
u are a true hero, some tutorials dont show that u have to create a bootable file after u convert from mbr to gpt
Tanks bro, you helped me recreate the EFI 💯💙💚
✌️
After change it to uefi, i cant boot my window with my flashdisk, it say "no bootable device". And if i change it to legacy again, it just stuck at loading if i boot my laptop
Did you change the bios settings?. After changing it to UEFI?
I change the boot mode
And my fd not detect
Remove the USB flash drive and try to boot in to Windows.
Actually what are you trying to do now?
@@fDFerozDaniel i try to boot into window, but it can't, but there is only a line in the upper left corner
I have formated my pc and trying to install window but it's saying that it can boot in uefi mode not in bios
What to do (I don't have any operating system in my pc)
Tell the exact...what's your issue?
@@fDFerozDaniel I had formatted my pc recently and now I want to install windows by my bootable pendrive but it's showing that it can only boot in uefi mode not in bios
Create windows bootable USB using RUFUS and then try
lol i'm trying to change bios because i can't get into it!!! what now?
UEFI shows only boot *from IPv4 and IPv6*
Need help
I have toshiba setup utility and I didn’t find bios
Hello i have bios mode of UEFI but mines look old its aptio bios
bro there is not any option in my usb drive!! its empty
my windows machine have a windows 10 pro , can use windows10 home dvd instead of that,,,.....
Yes you can
bro im getting an error while making bootable pen drive in Rufus.. it like ISO scan error. Please help me out.
Use a different ISO
QUESTION: Will this work for the Dell Optiplex 390 with an LGA 1155 Motherboard? I have heard that this motherboard is not compatible at all with UEFI. Is that true?
I don't know that but if your mobo has no UEFI support don't do this
@@fDFerozDaniel The Dell Optiplex 390 with that LGA 1155 Motherboard has a BIOS menu that allows you to select both "Legacy" and "UEFI." The problem is that when you select "UEFI," when you restart the computer it says there are no readable drives that can be booted from. According to what I have read online, the Dell Optiplex BIOS menu is supposed to have an option for "Advanced," but that is not available to select. As a result, you cannot select the option to no longer use Legacy.
I don't have winodws iso file ?? How to??
it worked perfectly. thank you
Does it will lose all data from device????
Does it reinstall the windows? Or we'll have our old windows converted in uefi including all files and apps?
It will have all your data intact, just did it today and everything works
There is no option like legacy and uefi hlp me
Thx. Its brief and informative video!
Wii it work on g41 series motherboard?
Works! Thank you!
👏👏
Brother my laptop to is stuck in windows installation page , at laat step after restarting the pc its did not Boot up its showing installation interface
Please Bro help there are lot office related files in my laptop now i cannot boot windows back
Hi Boss. Is it working on Windows Server 2012?
Gptgen is not recognised as an internal or external operable program or batch file .. when I run gptgen -w \\.\physicaldrive0
You are in wrong location. I mean go to the directory where you have extracted gptgen using cmd and try the command
@@fDFerozDaniel yeah i tried the way as of shown in the tutorial... I have kept in downloads n executed as of same.. may I have your mail id to share screenshots
Bro formatting and deleting partition will erase Window and all data in drive c?
Yes. But this method helps you to do it without data loss
@@fDFerozDaniel lost whole system :((
Hello . I have mode bios UEFI but if i try to acces to firemware setting from advance recovery i dont have it . Help will be much appreciated
Ways to access firmware settings vary from MOBO to MOBO
@@fDFerozDaniel how to check this MOBO then ? im new to this
Google "how to access UEFI settings in *YOUR MOBO BRAND NAME* "
@@fDFerozDaniel thank you !
Hello I’m stuck on system drive
Thanks it worked successfully 🙌
thanks man! it actaully worked
I dont have the Windows ISO file :(
hey Only version 2 was available is it ok for the iso image
Select version 1909
If I have linux installed in a different drive, will it delete it?
It will not be deleted but you have to add Linux to the boot menu to boot into linux
I switched from mbr to gpt using EaseUS before switch legacy to uefi, and now I am in the legacy boot menu. What I do?
the portion of the video where he boots the windows disk and brings up command prompt and does "disk part" etc etc. Follow that part closely. Its one of the last steps. that creates the uefi in windows the bios needs to see. Start at 5:00 and that's what you need.
@@cedmondson27 thank you
hello am using a hp laptop notebook and am not sure if my windows will boot after the conversions.i'll try to explain how my system configurations is in the bios setup under the boot options
Boot options
POST Hotkey Delay (sec) [0]
CD-ROM Boot [Enabled]
USB Boot [enabled]
Network Boot [Enabled]
Network Boot Protocol [IPV4 (legacy)]
Legacy Support [enabled]
.......
UEFI Boot Order
>Os Boot Manager
USB/CD/DVD ROM Drive
internal CD?DVD ROM drive
USB........
_
Legacy boot order
>notebook Hard Drive
USB/CD/DVD ROM Drive
internal CD?DVD ROM drive
USB........
kindly help..how will i make it to boot to uefi after the conversion of mbr to Gpt
It will work if your computer supports UEFI. And from the above information I'm sure that it supports UEFI
@@fDFerozDaniel does it mean i just have to convert to gpt and on booting my laptop boots to uefi?
Actually yes. This process will convert your disk from MBR to GPT and as your computer supports UEFI it will automatically boot to UEFI
@@fDFerozDaniel you know am just nervous because it's the newest machine and the configurations are different from the others that you just have to choose either legacy or uefi in the boot options and in this machine both are there,no place to switch..that's why i asked if it will still boot into windows 10 after the converson without changing anything on the boot options on my laptop..maybe this can be explained in a different tutorial for the newer machines with such kind of configurations
ok
Uh my pc won’t start now and it says ERROR: No boot disk has been detected or the disk has failed. Please help me...
i had the same problem pal unfortunately you need to reinstall windows
Bro can you tell what the background music is?
Thanks a lot,
It worked perfectly fine.
Brother in device section nothing is showing
Didnt worked the last step and i had to use ntfs because of the large iso
worked great! thx
Bhai pc window instal maang rha hai kya kru?