for people not understanding some things /s Copies the boot environment files to a partition labeled by volumeLetter and creates a new BCD store on it. As the system partition isn’t labeled, this option is not used in the typical deployment scenarios. The user should use this option when configuring a drive that will be used on another computer i.e. a secondary hard drive, or in case the correct boot partition is not automatically identified. More on the difference of deployment depending on the firmware type can be found in the section regarding the /f option below /f Specifies the firmware type. Valid values are UEFI, BIOS and ALL. Used with the /s flag. The UEFI value copies only the UEFI-compatible boot files and initializes a BCD store on a partition specified by the /s flag making it compatible with UEFI-based systems. The BIOS value does the same for BIOS-based systems. The ALL value installs both the BIOS- and UEFI-compatible versions of the bootloader and also configures each of their BCDs accordingly.
Great Video. I managed to convert my already running Win10 LTSC from MBR to UEFI using mbr2gpt via WinPE. I did not exactly what you mentioned but it definitely gave me ideas thus avoiding a full re-install. I had the entire install without SRP and I wanted to stay that way, however now I have a 100MB Partition 2 right after my C:\ which is Partition 1. Partition 3 being my DATA partition. The HP Pavilion laptop originally came with Windows 8.1 with UEFI enabled almost 7 yrs ago, did not attempt to change it until last year when I installed Win 10 LTSC in Legacy mode. Well, now with your ideas and suggestions I reached my goal. Thank you! Please keep these videos coming..All the best.
Since this video is already two years old, this comment will probably not help... but I followed the steps given and the boot drive still shows as MBR. However, the BIOS finally let me change from CSM to UEFI, which it would not do before. PC Health Check now says that I can upgrade to Windows 11, while the Windows Update screen says I cannot. Gee, I just love Microsoft. Also, I had quite a bit of effort to get bcdboot to work properly. He never did explain how he knew to set the source to d:\windows. On mine it was c:\windows. I think that part needs more details.
Wonderful! Worked a treat after other options failed for me. Installed a new UEFI-only MBoard/CPU (MSI MAG B560M with Intel i5 11th Gen: no legacy boot option!). This would not boot my old MBR based win10 hard drive which had a recovery partition at the end which I could not shrink to work around MBR2GPT error "not enough space at end of partition" error. Found this video and followed your instructions, booting from USB Win 10 built from Rufus, instead of trying to delete the recovery partition. Very pleased!
You are a genius. This process described by you worked for me after i tried some other processes on You Tube which ended up in failure and i had to reinstall Windows from backup. This was done on a Dell Latitude E7450 which was on MBR partition originally. Thanks again and keep up the good work.
THANK YOU SOOO MUCH SIR! You help me a lot.. It 10000% work if you follow the step correctly and remember your disk letter Lol.. It really work on my Lenovo V130 15igm once again thank you so much and sending love from Indonesia ❤❤ hope u and your family stay healthy
Hello, thank you very much for your video. I have a small question: after you have made this change, that means that your hdd have the system partition MBR (also no GPT), with a UEFI partition (here is the boot loader), but without secure boot, is it correct ? With a motherboard, we should configured it with: (1) without secure mode (I think it works only with a hdd GPT), (2) CSM (because of the MBR hdd), (3) mode only uefi, or mode uefi or legacy, but not only legacy. is it correct ?
Excellent video👍 My desktop mother board support only Legacy bios. HDD got damaged. But I got HDD from another desktop pc with Windows 10 loaded and with my data. Bcz of GPT (UEFI) style this HDD not booting. I have to recover my all data from this HDD. My mother board is Biostar G41D3+ which is 64bit operating system. I wonder why this mother board having only Legacy bios support? Should I select sys reserved of GPT hdd partition (100MB) to convert into Legacy (NTFS) ? what cmd should I use? Kindly help me out please 🙏🙏🙏.
I tried to install windows but I got " windows can not be installed to this disk. the selected dish has an MBR partition table on EFI system. windows can only installed to GPT disks. windows cannot be installed to this disk.the disk may fail soon.if other hard disk are available,install windows to another location" My question is "am I boot again windows to the PEN in GPT partition type and install", Is it working ?
Is there a way to deal with the boot list option legacy external devices and uefi? how can you add hdd under uefi boot option after installation?
2 года назад
Hi there! So i was following same steps as u did in this video but i got stuck at this command " bcdboot d:\Windows /s c: /f uefi" Whenever i run that command, it shows this error "Failure when attempting to copy boot files. Any way to fix that???
Mine is dell Vostro 15 3568 it was in legacy when I bought it. I want to change this to uefi I tried many methodss including mbr2gpt i only have disk 0 in the disl management menu please help me change it @itarmy 🙏🙏🙏
1.what is the system reversed partition and how can I get it (ok ik sys reversed is for boot files) but my boot and system files are in c drive but how can I move boot files to another partition just like you and what If I don't have that sys reversed partition do I have to format my c drive? 2.what is D:\windows?
Thanks for the helpful video. I have another question: I recently had a problem where my windows system crashed. I tried to repair the MBR but it didn't fix the problem. I ended up having to do a fresh install but on another drive. (Trying not to delete the partition where my data existed on the partition where windows was). Now I have a system reserved that has a drive letter (d:) and is visible on my new windows explorer! So in a nutshell, I have a EUFI part on the Disk1 and an MBR part on Disk 0. I have rebuild everything on the new part on Disk 1 and would love to backup/restore this on the Disk 0 Partition. Blowing away that partition but restoring it with a new fresh install! Is that possible? do you have a video of this? Thank you again for helping. D.
Sir, Can this method be used without data lose on my MBR HardDisk which has (extended partition) logical drives + with important data. And after conversion does MBR will be changed to GPT ?
Can we script diskpart with shrinking the OS partition and creating the efi only on computers with disk 0? Have an issue with win7-10 inplace upgrade where all computers so far I have deployed to get the no room for efi error.
My computer is bsod and i cant get past boot. Im in a bootloop and the reason is cause i must convert my hdd mbr to gpt. Is there a way to save any data from my mbr hdd before formatting off boot? I have windows 10 on my usb ready to fresh install but i just wanna know if theres a way to save my stuff without being able to boot fully.
IT Army so i found out my motherboard supports sata 3 only, and my hdd is sata 2 (this is due to a huge upgrade i did a couple days ago involving mobo ram and cpu) My final question is if i order a ssd sata 3, Can i remove my corrupt old hdd and install windows from usb on there?
what if we need without making whole format, and following the previous video I've got this, "Disk layout validation failed for disk 0 MBR2GPT: Conversion failed"
Now that i wanted to try this method, what do i have to do with the deleted "recovery partition"? Is it okay to leave it as it is, or must i retrieve back the recovery partition?
Plz help me converting my drive mbr to gpt without loosing formatting my drive. I have tried doing it by referring one of your video in which you mentioned mgr2gpt.exe file. But I getting validation error index 2. I don't know what to do. Plz help me
So that a lot of people don't waste their time you should mention up front that if you have legacy BIOS only with no UEFI setting this is all useless and will not work.
I have sony vaio e series and I cant convert to uefi due to no access to bios setting menu Ive tried all ways but cant boot bios menu From f2 it gives only a small menu without this option Can u help out
Hello sir, I'm Anita,thanks for this tutorial. I followed your procedure carefully but I'm stucked. I use HP Compaq 8100 Elite SFF PC. My system says press any key to boot from CD or USD but I can't find my firmware settings to convert to EFI on my system. Please help me. How do I go about it? My system uses Hewlett-Packard setup utility. Thank you
@@itarmy2778 thanks for your reply. I wanted to shift it so that I can install Android emulator to run some Android apps on it. It didn't work when I tried the first time.
good job sir, the way you explain that so good,, in my case lenovo s400 ,and screen and hard drive is damaged i install windows from other machine and use in this machine its boot,, i know that its because of UFEI is enable in bios ,,and i am not enter coz screen is damaged and i am using HDMI port for monitor ,,i am trying this but.. i am not understand that ,, what is D:windows . plz help me
Last partition too close to the end of the disk. Should end at offset 2000398917120 or below, found at 2000398934016 Says to me at the setuperr data when i tried to go MBR to GPT
Sir what if my system reserved is just 50 MB and the EFI partition is need 100 MB but I have recovery partition that have 507 MB ..What should I do? Pleasee I need your help
ERROR: Failed to enable backup/restore privileges. SOLUTION FOR THIS ERROR RUN COMMAND PROMPT RUN AS ADDMINISTATOR BY RIGHT CLICKING WHEN SEARCHING FOR CMD
Yeah boi Now I have my machine configured to UEFI! But I did it to a physical machine so it was a little pain for me to go to the firmware setting and change boot mode to EFI
@@itarmy2778 Thanks for the response. My system is an older one (dell 790) and I have tried to convert the MBR disk to GPT using CMD but fails the Validation. what do you recommend I should do.
@@itarmy2778 ok thanks, before i forgot to change my keyboard layout in the installation media. But i have a big problem now. I face this problem> boot configuration data is missing or corrupted.
You are genious ! I managed to clone Lenovo T440 to Lenovo T15 and used your tutorial . It works like a charm ! Can anyone tell me if it is possible to convert this back to Legacy boot again ? I like to move a clone from my new Lenovo T 15 to an older Lenovo L420, but this machine does not support legacy boot, so I need to revert/convert this back so it can boot legacy. I would appreciate if you could tell me how to do this ?
Need to enable UEFI to enter BIOS....need to enter BIOS to enable UEFI. I can't boot from external media cause NEED TO ENTER BIOS TO ENABLE BOOT OPTIONS.. Fkin nice!! I need to enter BIOS so I can enable Virtualization for running Docker on my PC. I can't enter BIOS and my C drive is MBR type, can't convert to GPT without losing data and unable to boot from enternal media without entering BIOS. I'm stuck in a loop here.
Hi First of all thanks for your video, great job ! In fact, i've done, to my mind the same, but i do not know how ! I've just used EasyBCD and after many manipulations, msinfo32 display bios mode as UEFI while my disk is MBR based, i do not understand very well what happens, excepted that i have reserved a small partition that now ows EFI folder instead of Boot folder. 1 /I've noticed that my windows start much quicker but i'm wondering if my situation is stable, i mean, on the internet it is said that GPT disks are more sage than MBR disk... If someone can help me to understand what happen and confirm the stability of my system, i would be so happy. 2/ Moreover, i've a rescue usb flash drive (MBR) of Windows 10, i would like to know if it gonna work or not with my UEFI bios if i can not boot windows anymore one day who knows ! ? Thanks in advance
Your attention please, I have seen ur 3 videos regarding this, but i need ur detailed help, as I cant afford to hire a professional who will charge a ransom amount from me to do all these, currently I'm jobless, I am having Asus H81-MCS UEFI & LEGACY both compatible motherboard, having 8gb of DDR3 ram, Core i3 4130,3.40Ghz 4th Gen processor, 3MB cache memory with 2 HDD Drive(Toshiba first one & Seagate 2nd one), Toshiba running on Win7Ultimate,and also will going to fresh install Win 8.1 pro 9600 version on Toshiba HDD by formatting Win 7 Ultimate, coz, its affected by viruses very badly, only the "C: drive (thank god) other partitions are safe no virus effect ,and i also don't want to run any more with Win 7 . Seagate running on Win 10Pro 1803 version, both the the HDD have MBR partition & both windows installed on MBR mode, apart form that I have C,D,E,F partitions on both the disk's, apart from G system reserve drive, now i need your help in details that how can I convert my mother board boot option to UEFI and Convert all of my 2 HDD (C drives + other 3 partitions) to GPT from MBR to make my PC bit faster & secure, through some easy method, is there any 3rd party free good software who can do both the the things? as i will not be able to run CMD prompts like you, if I try I'm sure it will be a mess for me, and most importantly can i convert all the 4+4 partitions including "C " drive(Toshiba + Seagate) GPT from MBR without loosing other 3(Toshiba)+3(Toshiba) drives data, i have lot of very imp. data stored on other 3 partitions in both of my HDD, I don't want to loose those under any cost (except some bad mishaps happens)... can i be able really convert all of the partitions without loosing any single data & settings? of the 8 HDD partitions of 2 diff. HD Drives? My Asus H81-MCS M.Board's Bios settings is also very difficult to understand, its very complicated to me at least, I bought this PC on 17 th June 2017 Please put a video asap on my issue in details if you really wish to help me or guide me the whole steps in details, hope to get a reply from you soon and can solve my problem by your heartful help, my email id is bsb081@gmail.com
Can you help me somehow I’m trying to change my windows to UEFI mode from legacy I tried everything it won’t work I have secureboot enabled in bios too
for people not understanding some things /s Copies the boot environment files to a partition labeled by volumeLetter and creates a new BCD store on it. As the system partition isn’t labeled, this option is not used in the typical deployment scenarios. The user should use this option when configuring a drive that will be used on another computer i.e. a secondary hard drive, or in case the correct boot partition is not automatically identified. More on the difference of deployment depending on the firmware type can be found in the section regarding the /f option below
/f
Specifies the firmware type. Valid values are UEFI, BIOS and ALL. Used with the /s flag. The UEFI value copies only the UEFI-compatible boot files and initializes a BCD store on a partition specified by the /s flag making it compatible with UEFI-based systems. The BIOS value does the same for BIOS-based systems. The ALL value installs both the BIOS- and UEFI-compatible versions of the bootloader and also configures each of their BCDs accordingly.
Great Video. I managed to convert my already running Win10 LTSC from MBR to UEFI using mbr2gpt via WinPE. I did not exactly what you mentioned but it definitely gave me ideas thus avoiding a full re-install. I had the entire install without SRP and I wanted to stay that way, however now I have a 100MB Partition 2 right after my C:\ which is Partition 1. Partition 3 being my DATA partition.
The HP Pavilion laptop originally came with Windows 8.1 with UEFI enabled almost 7 yrs ago, did not attempt to change it until last year when I installed Win 10 LTSC in Legacy mode. Well, now with your ideas and suggestions I reached my goal. Thank you! Please keep these videos coming..All the best.
Since this video is already two years old, this comment will probably not help... but I followed the steps given and the boot drive still shows as MBR. However, the BIOS finally let me change from CSM to UEFI, which it would not do before. PC Health Check now says that I can upgrade to Windows 11, while the Windows Update screen says I cannot. Gee, I just love Microsoft.
Also, I had quite a bit of effort to get bcdboot to work properly. He never did explain how he knew to set the source to d:\windows. On mine it was c:\windows. I think that part needs more details.
I love you
Glad it helped! You are welcome.
Wonderful! Worked a treat after other options failed for me. Installed a new UEFI-only MBoard/CPU (MSI MAG B560M with Intel i5 11th Gen: no legacy boot option!). This would not boot my old MBR based win10 hard drive which had a recovery partition at the end which I could not shrink to work around MBR2GPT error "not enough space at end of partition" error. Found this video and followed your instructions, booting from USB Win 10 built from Rufus, instead of trying to delete the recovery partition. Very pleased!
You are a genius. This process described by you worked for me after i tried some other processes on You Tube which ended up in failure and i had to reinstall Windows from backup. This was done on a Dell Latitude E7450 which was on MBR partition originally. Thanks again and keep up the good work.
THANK YOU SOOO MUCH SIR! You help me a lot.. It 10000% work if you follow the step correctly and remember your disk letter Lol.. It really work on my Lenovo V130 15igm once again thank you so much and sending love from Indonesia ❤❤ hope u and your family stay healthy
Glad I could help. Thanks for your love.
Hello,
thank you very much for your video.
I have a small question: after you have made this change, that means that your hdd have the system partition MBR (also no GPT), with a UEFI partition (here is the boot loader), but without secure boot, is it correct ?
With a motherboard, we should configured it with: (1) without secure mode (I think it works only with a hdd GPT), (2) CSM (because of the MBR hdd), (3) mode only uefi, or mode uefi or legacy, but not only legacy. is it correct ?
Excellent video👍 My desktop mother board support only Legacy bios. HDD got damaged. But I got HDD from another desktop pc with Windows 10 loaded and with my data. Bcz of GPT (UEFI) style this HDD not booting. I have to recover my all data from this HDD. My mother board is Biostar G41D3+ which is 64bit operating system. I wonder why this mother board having only Legacy bios support?
Should I select sys reserved of GPT hdd partition (100MB) to convert into Legacy (NTFS) ? what cmd should I use? Kindly help me out please 🙏🙏🙏.
Old mother boards don't support UEFI. BIOS can only boot from MBR partition style disks.
You are the best tutorial of computer you have explained cleary I have done this with out any tension I will tell my friends to suscribe your channel
Wow, thanks
Great video and solution! You saved me from a lot of unnecessary work!
I tried to install windows but I got " windows can not be installed to this disk. the selected dish has an MBR partition table on EFI system. windows can only installed to GPT disks.
windows cannot be installed to this disk.the disk may fail soon.if other hard disk are available,install windows to another location"
My question is "am I boot again windows to the PEN in GPT partition type and install", Is it working ?
Is there a way to deal with the boot list option legacy external devices and uefi? how can you add hdd under uefi boot option after installation?
Hi there! So i was following same steps as u did in this video but i got stuck at this command
" bcdboot d:\Windows /s c: /f uefi"
Whenever i run that command, it shows this error
"Failure when attempting to copy boot files.
Any way to fix that???
Thanks, will this make me able to boot from a UEFI Windows 11, even though I only have a BIOS and not a UEFI type of BIOS?
God bless.
will your data be lost? while doing this
❤❤THANQEU SO MUCH PAAJI😊 I tried it and i find my solution...
Welcome! Thanks for watching!
failure when attempting to copy boot files. what does this mean?
Mine is dell Vostro 15 3568 it was in legacy when I bought it. I want to change this to uefi I tried many methodss including mbr2gpt i only have disk 0 in the disl management menu please help me change it @itarmy 🙏🙏🙏
Will this work if my system and boot partitions are on different drives?
I got failure when attempting to copy boot filea
1.what is the system reversed partition and how can I get it (ok ik sys reversed is for boot files) but my boot and system files are in c drive but how can I move boot files to another partition just like you and what If I don't have that sys reversed partition do I have to format my c drive? 2.what is D:\windows?
Thanks for the helpful video. I have another question: I recently had a problem where my windows system crashed. I tried to repair the MBR but it didn't fix the problem. I ended up having to do a fresh install but on another drive. (Trying not to delete the partition where my data existed on the partition where windows was). Now I have a system reserved that has a drive letter (d:) and is visible on my new windows explorer!
So in a nutshell, I have a EUFI part on the Disk1 and an MBR part on Disk 0. I have rebuild everything on the new part on Disk 1 and would love to backup/restore this on the Disk 0 Partition. Blowing away that partition but restoring it with a new fresh install! Is that possible? do you have a video of this? Thank you again for helping. D.
You can use any imaging software to copy disk image from disk 1 to disk 0.
On my bios there is no UEFI or Secure boot, I don't know if this will work without those options on the bios, please help
If your computer doesn't support UEFI boot, then you can't perform the steps in the video. It may cause boot faiure.
Sir, Can this method be used without data lose on my MBR HardDisk which has (extended partition) logical drives + with important data. And after conversion does MBR will be changed to GPT ?
Yes, you can, Why you want to move to UEFI?
Can we script diskpart with shrinking the OS partition and creating the efi only on computers with disk 0? Have an issue with win7-10 inplace upgrade where all computers so far I have deployed to get the no room for efi error.
shrink desired=100
create partition primary
format fs=fat32 quick
IT Army thank you. Worked perfectly.
Boss is it working on Windows Server 2012?
My computer is bsod and i cant get past boot. Im in a bootloop and the reason is cause i must convert my hdd mbr to gpt. Is there a way to save any data from my mbr hdd before formatting off boot? I have windows 10 on my usb ready to fresh install but i just wanna know if theres a way to save my stuff without being able to boot fully.
Use an Ubuntu or other Linux Live CD to copy your data off without removing the hard drive
IT Army so i found out my motherboard supports sata 3 only, and my hdd is sata 2 (this is due to a huge upgrade i did a couple days ago involving mobo ram and cpu) My final question is if i order a ssd sata 3, Can i remove my corrupt old hdd and install windows from usb on there?
Yes, you can boot from USB
THANKS A LOT! used this method on my aunt's HP Stream 11 notebook
Glad it helped!
what if we need without making whole format, and following the previous video I've got this, "Disk layout validation failed for disk 0
MBR2GPT: Conversion failed"
I've already created 2 videos on MBR2GPT conversion failed. EFI partition must be fat32 format
Now that i wanted to try this method, what do i have to do with the deleted "recovery partition"? Is it okay to leave it as it is, or must i retrieve back the recovery partition?
In this video also, I deleted the recovery partition and created as EFI partition
@@itarmy2778 thx. Now if i use the ISO file that i just download in an external drive, will it work?
Yes, you can boot from a bootable USB
@@itarmy2778 ok thank you, i'll try this. Wish me luck
Plz help me converting my drive mbr to gpt without loosing formatting my drive. I have tried doing it by referring one of your video in which you mentioned mgr2gpt.exe file. But I getting validation error index 2. I don't know what to do. Plz help me
So that a lot of people don't waste their time you should mention up front that if you have legacy BIOS only with no UEFI setting this is all useless and will not work.
I have sony vaio e series and I cant convert to uefi due to no access to bios setting menu
Ive tried all ways but cant boot bios menu
From f2 it gives only a small menu without this option
Can u help out
I guess your PC doesn't support UEFI
@@itarmy2778 alright
Hello sir, I'm Anita,thanks for this tutorial. I followed your procedure carefully but I'm stucked. I use HP Compaq 8100 Elite SFF PC. My system says press any key to boot from CD or USD but I can't find my firmware settings to convert to EFI on my system. Please help me. How do I go about it?
My system uses Hewlett-Packard setup utility. Thank you
Hi Anita, your PC does not support UEFI. PLease use automatic repair to fix your PC. Why you want to shift to UEFI?
@@itarmy2778 thanks for your reply. I wanted to shift it so that I can install Android emulator to run some Android apps on it. It didn't work when I tried the first time.
ruclips.net/video/ej1fZOQdw-Q/видео.html
@@itarmy2778 thank you
Will this work on Dell Latitude E7440
Yes, if it supports UEFI.
it shows unable copy boot files
Superb.... Great tutorial
Thank you! Cheers!
@@itarmy2778 welcome 💝
Can i use gpt format hdd on legacy bios pc only for storage?
Yes
Sir why you start in virtual machine
My machine is already in UEFI mode. You can follow the same steps on any machine.
good job sir, the way you explain that so good,, in my case lenovo s400 ,and screen and hard drive is damaged i install windows from other machine and use in this machine its boot,, i know that its because of UFEI is enable in bios ,,and i am not enter coz screen is damaged and i am using HDMI port for monitor ,,i am trying this but.. i am not understand that ,, what is D:windows . plz help me
Thanks for watching. replace D with the drive letter containing Windows folder.
Last partition too close to the end of the disk. Should end at offset 2000398917120 or below, found at 2000398934016
Says to me at the setuperr data when i tried to go MBR to GPT
Try shrinking the last partition by 100 MB
says 'Failure when attempting to copy boot files'
Please ensure the drive letter after /s switch is correct
Really helpful, thanks!
Glad it was helpful!
Sir what if my system reserved is just 50 MB and the EFI partition is need 100 MB but I have recovery partition that have 507 MB ..What should I do? Pleasee I need your help
Please share the disk partition screenshot
@@itarmy2778 how can I upload it?
share imgur.com link
imgur.com/4xLcU70 this is my disk partition sir
You can use 507 MB partition as UEFI partition.
I shouldn't have done this now my system is showing " an operating system wasn't found, try disconnecting the drives " and is not starting
Did yo change settings in BIOS ?
Had the same issue at 5:57. Please change the firmware settings.
ERROR: Failed to enable backup/restore privileges. SOLUTION FOR THIS ERROR RUN COMMAND PROMPT RUN AS ADDMINISTATOR BY RIGHT CLICKING WHEN SEARCHING FOR CMD
Why is it need to covert to uefi?
ruclips.net/video/KnBaHwwI7D4/видео.html
Yeah boi
Now I have my machine configured to UEFI! But I did it to a physical machine so it was a little pain for me to go to the firmware setting and change boot mode to EFI
Nice work!
can you change the disk to GPT after this Process ?
Yes
@@itarmy2778 Thanks for the response. My system is an older one (dell 790) and I have tried to convert the MBR disk to GPT using CMD but fails the Validation. what do you recommend I should do.
Please check validation failed videos
I need help. How to type "\" in cmd. I cannot figure it out.
If you have numeric keypad use Alt+92 or use Character Map application.
@@itarmy2778 ok thanks, before i forgot to change my keyboard layout in the installation media. But i have a big problem now. I face this problem> boot configuration data is missing or corrupted.
Boot using windows 10 USB or DVD and perform the steps
@@itarmy2778 it seems that everything i've tried didnt work. So i think i'm gonna reinstall the windows 10 (hopefully the files wont be deleted).
format karna padega kya
Yes, only recovery partition
You are genious ! I managed to clone Lenovo T440 to Lenovo T15 and used your tutorial . It works like a charm !
Can anyone tell me if it is possible to convert this back to Legacy boot again ?
I like to move a clone from my new Lenovo T 15 to an older Lenovo L420, but this machine does not support legacy boot, so I need to revert/convert this back so it can boot legacy. I would appreciate if you could tell me how to do this ?
Thanks! Try automatic repair from Windows installation media.
Useful information
Thanks
Need to enable UEFI to enter BIOS....need to enter BIOS to enable UEFI.
I can't boot from external media cause NEED TO ENTER BIOS TO ENABLE BOOT OPTIONS..
Fkin nice!!
I need to enter BIOS so I can enable Virtualization for running Docker on my PC. I can't enter BIOS and my C drive is MBR type, can't convert to GPT without losing data and unable to boot from enternal media without entering BIOS. I'm stuck in a loop here.
Sir hp how to create hp recovery D drive factory os pre-installed with drivers
Please create a video showing recovery USB creation and installation and disk partitions after installation.
@@itarmy2778 sir how to send a video to you
Upload on RUclips and share link.
Sir please UEFI bootable disk kaise banate hai uspar ek video banayiye
ruclips.net/video/F5-02HfpTzI/видео.html
failure when attempting to copy boot files
Didn’t work
Hi First of all thanks for your video, great job !
In fact, i've done, to my mind the same, but i do not know how !
I've just used EasyBCD and after many manipulations, msinfo32 display bios mode as UEFI while my disk is MBR based, i do not understand very well what happens, excepted that i have reserved a small partition that now ows EFI folder instead of Boot folder.
1 /I've noticed that my windows start much quicker but i'm wondering if my situation is stable, i mean, on the internet it is said that GPT disks are more sage than MBR disk...
If someone can help me to understand what happen and confirm the stability of my system, i would be so happy.
2/ Moreover, i've a rescue usb flash drive (MBR) of Windows 10, i would like to know if it gonna work or not with my UEFI bios if i can not boot windows anymore one day who knows ! ?
Thanks in advance
This did not work at all
It was very useful and interesting tutorial video. Thnx
Glad it was helpful!
Not working
What is the issue?
@@itarmy2778 i want to change mbr to gpt but not working
@@itarmy2778 you can any help?
thanks a lot it worked for me ....
You're welcome!
Hi good morning I use Asus k 43 by
7 big like 👍
Big thanks
Your attention please,
I have seen ur 3 videos regarding this, but i need ur detailed help, as I cant afford to hire a professional who will charge a ransom amount from me to do all these, currently I'm jobless, I am having Asus H81-MCS UEFI & LEGACY both compatible motherboard, having 8gb of DDR3 ram, Core i3 4130,3.40Ghz 4th Gen processor, 3MB cache memory with 2 HDD Drive(Toshiba first one & Seagate 2nd one), Toshiba running on Win7Ultimate,and also will going to fresh install Win 8.1 pro 9600 version on Toshiba HDD by formatting Win 7 Ultimate, coz, its affected by viruses very badly, only the "C: drive (thank god) other partitions are safe no virus effect ,and i also don't want to run any more with Win 7 .
Seagate running on Win 10Pro 1803 version, both the the HDD have MBR partition & both windows installed on MBR mode, apart form that I have C,D,E,F partitions on both the disk's, apart from G system reserve drive, now i need your help in details that how can I convert my mother board boot option to UEFI and Convert all of my 2 HDD (C drives + other 3 partitions) to GPT from MBR to make my PC bit faster & secure, through some easy method, is there any 3rd party free good software who can do both the the things?
as i will not be able to run CMD prompts like you, if I try I'm sure it will be a mess for me, and most importantly can i convert all the 4+4 partitions including "C " drive(Toshiba + Seagate) GPT from MBR without loosing other 3(Toshiba)+3(Toshiba) drives data, i have lot of very imp. data stored on other 3 partitions in both of my HDD, I don't want to loose those under any cost (except some bad mishaps happens)... can i be able really convert all of the partitions without loosing any single data & settings?
of the 8 HDD partitions of 2 diff. HD Drives?
My Asus H81-MCS M.Board's Bios settings is also very difficult to understand, its very complicated to me at least, I bought this PC on 17 th June 2017
Please put a video asap on my issue in details if you really wish to help me or guide me the whole steps in details,
hope to get a reply from you soon and can solve my problem by your heartful help, my email id is bsb081@gmail.com
Gud job 😎
Thanks
Thanks bro
I lost my windows
If you do all the steps properly you will not loose Windows OS. Are you sure your machine supports UEFI? What is the error?
@@itarmy2778 sir how to check that my machine supports uefi or not
Wrong Number….
THANK YOU
Thanks
Welcome
Kwaai 🎉
Can you help me somehow I’m trying to change my windows to UEFI mode from legacy I tried everything it won’t work I have secureboot enabled in bios too