Making a Steel Knot Metal Handle - Rebar Industrial Style Handle - Rebar Art Welding Project
HTML-код
- Опубликовано: 17 янв 2024
- In this video, I make a Steel Knot Metal Handle which is an Industrial Style Metal Handle, bending rebar to make the Sheepshank knot. I love the look of industrial furniture and all the decor that comes with it, and this rebar handle has the look I like. I hope you enjoy my video of the project, it was a lot of fun to make.
The main tools used, are an LPG Burner, MIG welder, angle grinder, drill, and bench vise.
The Rebar in the handle is 13mm (1/2 inch), The wide flat bar is 75mm wide (3 inches), and 6mm (1/4 inch) thick, The smaller flat bar is 65mm wide (about 2 1/2 inches) and 3mm thick.
Tools / Supplies, I often use are.
Marking out Tools
Markal Silver-Streak Metal Marker Round: amzn.to/3mTJDHt
Milwaukee 4pk Inkzall Black Ultra Fine Point Pens: amzn.to/2WKKpeE
Milwaukee Inkzall Jobsite Fine Point Black Permanent Marker 12 Pack: amzn.to/3kHrXfo
Locking Pliers - Vise Grips
MILWAUKEE 10” Locking Pliers, Curved Jaw: amzn.to/3zzJH2u
Milwaukee 6" Long Nose Locking Pliers: amzn.to/3jyVLeS
Milwaukee 6” Locking Clamp Regular Jaws: amzn.to/3jB94eI
KNIPEX Tools Long Nose Grip Pliers: amzn.to/3ByD1SP
Magnets
Magnetic V-Pads Kit, Magnets On Both Pad Face & Bottom: amzn.to/3DCya4W
Mini Magnetic Fabrication Square Magnets Angles: 30°, 60°, 45°, 90°: amzn.to/2WN9Fkr
“L” shape Corner Square Magnets 12°, 90° & 60° Angle Setting: amzn.to/2YaZXsU
My camera set-up.
Canon EOS M6 Mark II Camera 15-45mm Lens: amzn.to/3DNnn83
VideoMicro Rode Compact On-Camera Microphone: amzn.to/3QkUBnK
Camera Tripod Vanguard Alta Pro 2: amzn.to/3yB8hP5
The Brand of the Drill bits, and cutting/flap discs, is "Alpha" If you can't get them at your local hardware shop, here is a link to Alpha Tools: alphatools.com.au
As an Amazon Associate, I earn from qualifying purchases. This means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows me to continue to make more videos like this one. Thank you very much for your support!
►►Subscribe to our Channel for more videos ►► bit.ly/2ULxLJogavinclark
Always use all the correct safety gear, and use your tools safely, I am not a good role model for this.
Hope you found something of use in my video or at least found it entertaining.
Gavin Clark DIY
Note: When you bend metal/rebar, you naturally weaken it. Bending it cold will normally cause fine cracks, and it may even break if you put enough strain on the rebar or bend it in the same place too many times. Do not rely on cold-bent steel/rebar to support a load. 
Хобби
![PADDINGTON IN PERU - Official Trailer [4K] - Paddington Bear is back!](http://i.ytimg.com/vi/lKgitu25ZAg/mqdefault.jpg)
I'm a 69-year-old Japanese man with the same hobby who always looks forward to your videos.
I'm thinking of making a treasure chest for my grandchildren to enjoy.
You are the Rebar King!! You should make an epic door knocker to go along with the door handles
Good to see you again, Gavin! Thoroughly enjoyed the video and can't wait for the next one.
Thank you very much, I am glad you liked it.
If you were in Star Wars you would be Bend-Kenobi. Love your work sir. Fan from Arkansas, USA
Nice to see you again I hope you had a great Christmas and new year. I always enjoy watching you dance around steel you have a great eye for detail and your work is always on point thanks Gavin
Thank you very much Bradley, we had a very good Christmas, I hope your was good as well. Cheers! mate
Hello 👋 my friend. Like 👍🏻 super ideas 💥
Thank you very much, I am glad you liked it.
Happy New Year, Gavin! Beautiful work as always. Hope you are doing well. You do need quite a large door for that handle!
-mike
Thank you very much, I am glad you liked it Mike, I am going quite good. Yes, it must be a nice door too, it will turn up. Cheers!
Great job Gavin. A heavy piece of art ! Looks fantastic. 😊
And, last but not least, of course a happy and healthy new year !🍀
Thank you very much, I am glad you liked it and I appreciate your comment. I wish you a happy and healthy new year. Cheers!
Beautiful job Gavin. You are the master of your craft.👍👍
Thank you very much, I appreciate your comment.
Another great project Gavin! Nice job.
Thank you very much Mike, I am glad you liked it.
Gavin I like your style keep up the creative rebar creations,myself and my Son really enjoy your channel thanks for posting🤗😎🤗😎
Thank you very much Garth, I appreciate your comment.
Excellent video again Gavin, always a pleasure to watch your videos, so enjoyable and educational.
Thank you very much Brett, I appreciate your comment.
Hola Gavin, me encanta tu trabajo cómo siempre, no dejes de hacer vídeos por favor 😊, incluso te busqué por instagram pero mi torpeza fue superior a mí y no te encontré, muchas gracias por tus aportaciones, tu paciencia y sabiduría, me sigues sorprendiendo. Cómo siempre, saludos desde España, aquí tienes un gran seguidor. Hasta pronto.
Muchas gracias, me alegro que te guste mi trabajo y agradezco mucho tu comentario. Saludos desde Australia.
Outstanding! Love to watch you create these projects!
Thank you very much Jay, I am glad you liked it. I appreciate your comment. Greetings from Australia.
Thank you for the apprenticeship sir 😊
I enjoy watching you & seeing the joy it brings you in sharing really warms the heart. Best to you...
Thank you very much, I am happy you liked it and I wish you the best for your future projects.
I love knots too.
This is most fancy handle I've ever seen :O
Thank you very much, I am glad you liked it.
Great job and another Fantastic piece you made! 💙 🤗
Thank you very much Kera, I am happy you liked it.
Another grate job Gavin. inspirational. hope we see more from you,
Thank you very much, I am glad you liked it.
Bloody hell mate, you have done it again, brilliant stuff.
Thank you very much David, I am glad you liked it.
Congratulations Gavin Clark, I love your videos
Thank you very much Gilberto, I appreciate your comment.
Good to see another video Gavin! Nice work as always sir!!
Thank you very much Earl, I appreciate your comment.
Absolutely fantastic, you are very skilled and your designs are incredible. I am looking forward to your next project.
Thank you very much, I am glad you liked it and I appreciate your comment.
Another great project video! thank you!
Thank you very much Joe, I am glad you liked it.
Ваши знания, опыт, настойчивость, трудолюбие и фантазия позволяют делать такие чудеса! Спасибо за Ваши уроки.
Большое спасибо, я ценю ваш комментарий.
Unbelievable workmanship, keep up the good work ....
Thank you very much, I am glad you liked it.
Thanks Gavin , that was a great video. Stay safe, Fred.
Thank you very much, I am glad you liked it Fred.
Ваши идеи всегда на расхват
Большое спасибо, я ценю ваш комментарий.
Amazing work, Love it! Now that I have retired l'll be making some! Cheers.
Thank you very much Kenny. I wish you the best for your future projects and your retirement.
That looks awesome !!
You almost make it look easy. Very symmetrical.
I always look forward to seeing your new videos.
Thank you very much, I am glad you liked it and I appreciate your comment.
Beautiful work, in Argentina that knot is nautical and is known as "Margarita" and is used to shorten ropes. Greetings from Buenos Aires, Argentina.
Thank you very much for that information, we call it a Sheepshank knot here, Greetings from Australia.
Hi from Tennessee, and that's an awesome project, enjoyed the video...
Thank you very much Marty, I appreciate your comment. Greetings from Australia.
Man with the tools you have you truly amaze me. Not some fancy shop just you and your talent. You inspire me to the nines. I try to do some of those things and it’s not easy. Love your talent. Keep it going my friend.
Thank you very much Jim, I try to just use simple tools on the channel if I can. I appreciate your comment.
It looks great and you did a wonderful job making it as well!!!!
I enjoyed your video so I gave it a Thumbs Up
Thank you very much, I am glad you liked it. I appreciate your comment and the like.
I cant do it with a piece of rope, much less with rebar... Very nice work Mr. R.. thx for bringing us along.. take care my friend and God Bless...
Thank you very much Gary, I appreciate your comment. Cheers!
Looks great, nice piece and the workmanship is first class young man, thanks for the inspiration and video.
Thank you very much, I appreciate your comment.
Love watching your videos, makes me wanna go out and nab a bunch of rebar and go through all the Boy Scout knots lol.
Hahaha, Thank you very much, I am glad you liked it.
Excelente proyecto muy bien desarrollado y mejor ejecutado maestro, el domador de cabillas corrugadas, hizo un trabajo espectacular, gracias por compartir sus conocimientos y experiencias, un saludo cordial y por supuesto un merecidisimo like desde Narón (Galicia)🔝👍🤓
Muchas gracias, me alegra que te haya gustado y agradezco mucho tu comentario. Saludos desde Australia.
And a fine one it is.....
Thank you very much.
Love your art/work. You make it look so easy.
Thank you very much, I am glad you liked it.
Nice job, over the top.
Thank you very much, I am glad you liked it.
Cool THX Grüße aus Norwegen Ronny
Thank you very much Ronny, I am happy you liked it. Greetings from Australia.
Very nice job
Thank you very much.
love it mate....amazing
Thank you very much, I appreciate your comment.
I discovered your channel and I have been impressed with the magnificent work you do....
I have subscribed your channel to continue enjoying....
Greetings from Toledo , Spain
Thank you very much, I am happy you liked it. Welcome to the channel, and Greetings from Australia.
Love it. +10
Thank you very much, I appreciate your comment.
Estupendo trabajo muy profesional un saludo
Muchas gracias, me alegro que te haya gustado. Saludos desde Australia.
Very nice Gavin
Thank you very much.
Great work. I reckon that was a tough one.
Thank you very much, it was and interesting one, but it did go ok. Cheers!
nice work Gav
Thanks mate, Cheers!
Très bon professeur, musique parfaite, merci
Merci beaucoup, je suis heureux que cela vous ait plu.
Absolutely brilliant. And the perfect place for that would be on the beer fridge door
I think you have come up with the perfect place, I agree 100%. Thank you for your suggestion Phil.
Excelente trabajo
Muchas gracias, me alegro que te haya gustado.
"Poetry in motion" there Gavin.
Thank you very much Ross, I am glad you liked it.
Boa Noite, sensacional parabéns mais uma vez (o SR e um gênio)
Muito obrigado, fico feliz que tenha gostado.
This is fantastic craftsmanship.
Thank you very much, I appreciate your comment.
Genial!!! 😁👍
Привет как обычно металл превращаешь в пластилин 😁👍👍👍👍👍🤝
Большое спасибо. Мне нравится делать эти вещи.
Bravoooo
Thank you very much, I am happy you liked it.
Awesome
Thank you very much, I am glad you liked it.
I love watching you work Gavin, your craftsmanship is impeccable.
Thank you very much Scott, I appreciate your comment.
Boy I wish I had the patience to build the stuff you do. Keep the videos coming.
Thank you very much Ron, I appreciate your comment.
One of a kind. Attaboy Gavin.
Thank you very much Clint, I am glad you liked it.
Beautiful end product Gavin. I am amazed at your blacksmith talents in bending these knots up, cheers!
Thank you very much, I am glad you liked it, and I appreciate your comment. Cheers!
Very nice. Will be waiting to see it mounted on a door when you get a door that it will fit on
Thanks
Thank you very much, I am glad you liked it Mike. Cheers!
Parabéns. Mais um belo trabalho.
Muito obrigado, fico feliz que tenha gostado.
Top!
Thank you very much.
chingon señor
Muchas gracias, me alegro que te haya gustado.
Мне нравиться. Приколные изделия, но на любителя. А вот исполнение отличное! Рука истинного мастера!
Спасибо большое, я рада, что вам понравилось, и мне очень приятен ваш комментарий.
Hello Gavin. The knots look very good. We can do a community project. I'll then open the door for you. Greetings from Germany. Andi
Thank you very much Andrea, I am glad you liked it. I am in Australia, so I don't think that will work. Greetings from Australia.
❤️❤️❤️👍
❤
Un hermoso trabajo, una manija grande para una puerta grande.
Y te has divertido!
Intentaré hacerlo, ya cuento con tu dirección de obra y se donde la colocaré...
Muchas gracias, Gavin.
Y feliz '24!
Muchas gracias, me alegro que te haya gustado. Te deseo lo mejor para tu proyecto y para el 2024.
👍
You sound like american and you use metric :O
Thats first time I see that on RUclips .. the knot is very nice, good job.
Thank you very much. I am Australian, and live in Australia, I grew up using imperial and metric, so I easily use both.
👍🏼👍🏼👍🏼👍🏼👍🏼👌🏼😎
👍👍
You should do sailing knots and sell them ⛵
I have done a few knots in steel, I enjoy making them, Cheers! John
Very nice. How long did it take to make that ?
С любовью из России. Здесь не все упыри.
Большое спасибо. Привет из Австралии. Ура!
Oh my god, this is great and I want to try it. But tell me, what about rust? After a few months or years, will it rust? Do you apply a clear coat or something? Greetings from very cold Canada!
I often use Penetrol Rust Treatment Penetrates Rust 300g Aerosol Spray, and then put two topcoats of Semi-Gloss Clear Coat. That is what I used on the rebar lettering on the back of my workbench, here is the link to that video. ruclips.net/video/JA-wk62Zghk/видео.html I try not to comment on finishes, As what climate you are in, is it inside-outside, lots of rain, ice, do you want long term and rarely touch, or a wax with a wipe over every year. That is why I have no opinion, Please ask someone in your area what you should use, I feel this is a better way to find out what would be best for you. Thank you for your comment. Greetings from Australia.
Nice work very inspiring!! When I heat rebar for bending it seem to crack or break ?? Any thoughts? Thank you!!
Thank you very much, I am glad you liked it. I have had the same problems at times, this one went well, but the rebar does not like to be bent one way and then back in the same direction, if it is always a new direction it seems to be OK. I hope that helps a bit. I wish you the best for your project.
Hi if used on a shed how do you stop it going rusty love the style on your work
I often use Penetrol Rust Treatment Penetrates Rust 300g Aerosol Spray, and then put two topcoats of Semi-Gloss Clear Coat. That is what I used on the rebar lettering on the back of my workbench, here is the link to that video. ruclips.net/video/JA-wk62Zghk/видео.html I try not to comment on finishes, As what climate you are in, is it inside-outside, lots of rain, ice, do you want long term and rarely touch, or a wax with a wipe over every year. That is why I have no opinion, Please ask someone in your area what you should use, I feel this is a better way to find out what would be best for you. Thank you for your comment.
How are you Gavin? How is life?
Your channel says you’re in Australia. Australia has the same type of 120v plugs as us in North America? Not the big UK style?
Yes I am in Australia, we use 240volt power in Australia.
do you do commissions?
No, I am sorry I do not, I appreciate your comment.
*kindly my one video share in your community tab*