I make a Twisted Steel Rebar Industrial Style Handle - MIG Welding Project.
HTML-код
- Опубликовано: 25 июл 2021
- I make a Twisted Steel Rebar Industrial Style Handle. I love the look of industrial furniture and all the decor that comes with it, and this handle has the look I like. I hope you enjoy my video of the metal twist handle, it was a lot of fun to make a nice MIG welding project.
The wide flat bar is 6mm thick, 50mm wide, and 225 long. The small flat bar is 6mm thick 32mm wide and 57mm long. The rebar is 7mm rebar. The distance between the two uprights is 145mm.
The main tools used, are a MIG welder, angle grinder, drill, and bench vise.
Tools / Supplies, I often use are.
Marking out Tools
Markal Silver-Streak Metal Marker Round: amzn.to/3mTJDHt
Milwaukee 4pk Inkzall Black Ultra Fine Point Pens: amzn.to/2WKKpeE
Milwaukee Inkzall Jobsite Fine Point Black Permanent Marker 12 Pack: amzn.to/3kHrXfo
Locking Pliers - Vise Grips
MILWAUKEE 10” Locking Pliers, Curved Jaw: amzn.to/3zzJH2u
Milwaukee 6" Long Nose Locking Pliers: amzn.to/3jyVLeS
Milwaukee 6” Locking Clamp Regular Jaws: amzn.to/3jB94eI
KNIPEX Tools Long Nose Grip Pliers: amzn.to/3ByD1SP
Magnets
Magnetic V-Pads Kit, Magnets On Both Pad Face & Bottom: amzn.to/3DCya4W
Mini Magnetic Fabrication Square Magnets Angles: 30°, 60°, 45°, 90°: amzn.to/2WN9Fkr
“L” shape Corner Square Magnets 12°, 90° & 60° Angle Setting: amzn.to/2YaZXsU
My camera set-up.
Canon EOS M6 Mark II Camera 15-45mm Lens: amzn.to/3DNnn83
VideoMicro Rode Compact On-Camera Microphone: amzn.to/3QkUBnK
Camera Tripod Vanguard Alta Pro 2: amzn.to/3yB8hP5
The Brand of the Drill bits, and cutting/flap discs, is "Alpha" If you can't get them at your local hardware shop, here is a link to Alpha Tools: alphatools.com.au
As an Amazon Associate, I earn from qualifying purchases. This means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows me to continue to make more videos like this one. Thank you very much for your support!
►►Subscribe to our Channel for more videos ►► bit.ly/2ULxLJogavinclark
Always use all the correct safety gear, and use your tools safely, I am not a good role model for this.
Hope you found something of use in my video or at least found it entertaining.
Gavin Clark DIY
Note: When you bend metal/rebar, you naturally weaken it. Bending it cold will normally cause fine cracks, and it may even break if you put enough strain on the rebar or bend it in the same place too many times. Do not rely on cold-bent steel/rebar to support a load. I love the look of industrial furniture and all the decor that comes with it, and this shelf bracket has the look I like. A nice MIG Welding Project using rebar 
Развлечения
I’m going to tell a fellow that I know about this channel, he does this sort of work, he might see some ideas that he can use.
Thank you Sir for this video
I made a set sold them for $120 us dollars have been asked for more and other designs your videos a unbelievable good thank you
Merci beaucoup pour le partage de cette vidéo 👍 merci pour votre intelligence, merci pour votre explication 🌹🙌🙌 salutations à vous 🙏🙏🙏🙋💐🏆🙏🙏
Merci beaucoup, salutations d'Australie.
Я в молодости работал слесарем-инструментальщиком, мне очень нравится видеть вашу работу.
Большое спасибо, я ценю ваш комментарий.
nice it's artistic idea very cool Thnks for sharing this video.
Thank you very much, I am glad you liked it.
Thank you very much, I am glad you liked it.
Красавчик, благодарю ☝️👏👏👏
Большое спасибо, я рада, что вам понравилось.
Mantap,,,sangat kreatif sukses selalu GBU
Terima kasih banyak, saya senang Anda menyukainya.
@@GavinClarkdiy saya suka untuk semua orang yang KREATIF,,,terutama hasil KARYA ANDA,, TERUS BERKARYA,, SUKSES GBU
@@natanaelagusdharmawan7842 Terima kasih banyak.
this guy is the perfect example of old school style, he doesn't need fancy tools and equipment like most of the other guys but he still got the job done.
Thank you very much, I appreciate your comment.
Приятно смотреть на Ваши изделия. Привет из России.
Большое спасибо, привет из Австралии.
Нет предела Вашей фантазии и нет предела Вашему мастерству.
Большое спасибо, я ценю ваш комментарий, очень приятно сказать.
Parabéns amigo que trabalho bacana 🇧🇷🇧🇷
Golden hands.
Thank you very much.
I honestly can say this man has taught me so many tricks in these clips . Guys a legend
Thank you very much, I appreciate your comment.
Very Good, Very Jon jajaja saludos desde México 🇲🇽👍
Muchas gracias, me alegra que te haya gustado. Saludos desde Australia.
Thanks to RUclips for introducing me to such a master like you.
Thank you very much, I appreciate your comment.
Молодец, привет из России.
Большое спасибо, привет из Австралии.
Моё решение на калитку, спасибо друг!
Большое спасибо, я рада, что вам понравилось.
Thank you for sharing your videos.
Not a problem, I am glad you liked it.
Saludos desde Chile al sur del mundo 🇨🇱
Muchas gracias, Saludos desde Australia.
Rain is a good thing, Rain grows Corn and Corn makes Whisky.
Sounds like we need more rain then, I like Whisky.
Awesome!. 👏 👏 👏 You are amazing, Gavin!. Nice to hear from you again. Take care, dear friend.
Thank you very much Eider, I appreciate your comment. Keep safe.
Very good.
Argentina
Thank you very much, Greetings from Australia.
Вы молодец 👍 🤝
Спасибо большое.
WOW.....That looks great & materials are cheap.
Thank you very much, I am glad you liked it.
Wounderful spin handel.
Thank you very much, I am glad you liked it.
Вы вдохновитель класс.
Большое спасибо, я рада, что вам понравилось.
Parabéns! Rio de Janeiro Brasil 🇧🇷
Muito obrigado, Saudações da Austrália.
Nice job good handle thanks for sharing ,
Thank you very much, I am glad you liked it.
Daughter likes to collect old used railroad spikes. Likes to paint them and give away to neighbors. They needed to be cleaned before paint and didn’t want to wire brush. Threw them in cement mixer with sand blast media and tumbled for few hours. Worked perfectly for smaller rusted steel.
That is a nice simple way to do it, and while it is happening you can be doing other things, instead of being on the wire brush, thank you for your comment.
Ok, you did it. I went to Lowe's, bought some 3/8" rebar, and made a sweet letter opener, bent the rebar to make a very comfortable handle. Please, keep posting.
That is awesome news, Thank you very much, I wish you the best for your future projects.
@@GavinClarkdiy hello gavin, whats your email address? Regards simon
Grande conoscenza delle tecniche e grande manualità! Complimenti, Gran bella maniglia
Grazie mille, sono felice che ti sia piaciuto.
Masha Allah very good job I love your work
Thank you very much. I appreciate your comment.
You must have gotten a Fathers Day gift of assorted rebar. Nice vid.
Thank you very much, I am glad you liked it. I can never have too much rebar.
Молодец мужик, руки растут из нужного места.
Большое спасибо, я рада, что вам понравилось.
Excelente. Usted es un maestro.!!!
Muchas gracias, agradezco tu comentario.
THX from argentina!
Thank you very much, Greetings from Australia.
Sir you are so gifted
Thank you very much, I appreciate your comment.
Excellent work ⭐️⭐️⭐️⭐️⭐️
Thank you very much, I appreciate your comment.
Всё Гениальное Просто!👍
Thank you very much.
Hendlle nya sangt kreative sir 😲👍🤝 indonesia🇮🇩
Terima kasih banyak, saya senang Anda menyukainya. Salam dari Australia.
@@GavinClarkdiy sama2 🤝🤝🤝🇮🇩
I am from Indonesia 👍👍👍😀😀😀
Greetings from Australia.
@@GavinClarkdiy 👍👍👍
You do better work with a file and an angle grinder than a lot of people can do with a Bridgeport mill. Very nice work.👍
Thank you very much, I appreciate your comment.
Супер!!!Руки на месте!Приятно посмотреть на работу.
Большое спасибо, я рада, что вам понравилось. Я ценю ваш комментарий.
Exelente mi amigo ..es usted un verdadero artesano de la soldadura....
Muchas gracias, agradezco tu comentario.
@@GavinClarkdiy mi amigo voy a fabricar uno para mi porton y me guiare con tu video ...luego te mando foto...
@@alvarogutierrez1422 Muchas gracias, te deseo lo mejor para tu proyecto. Espero tu foto. Gracias.
You are a wonderful blacksmith
Thank you very much, I am glad you liked it.
Really enjoy watching you product such beautiful items with the simplest of tools and materials.
You are very creative and do beautiful work.
From Missouri USA
Thank you very much, I appreciate your comment. Greetings from Australia.
Nice work, true master.
Thank you very much, I appreciate your comment.
Cool idea to twist rebar💪
Thank you very much, I am glad you liked it.
SUPER GENIUS,,,,,LUAR BIASA,,,SUKSES SELALU GBU
Well my friend you did it again and added a little bit of fancy in this to it just beautiful You still surprise me.
Thanks for posting 👍👍👍👍👍👍👍👍👍
Thank you very much George, I am glad you liked it.
Çok güzel çalışmalarınız var ilgi ile takip ediyorum.
Çok teşekkür ederim, yorumunuzu takdir ediyorum.
You make it look so easy.It looks awesome to so different to what you normally see. Great channel fella so much variety. I love what you do with timber to.
Hola 👋 amigo excelente muí original,
Muchas gracias, me alegro que les haya gustado.
Tu é top das galáxia moço
Muito obrigado, agradeço seu comentário.
Отлично. Пару тройку ваших идей применю при строительстве дома
Большое спасибо, я желаю вам всего наилучшего в ваших проектах.
I'm like this you're video
Thank you very much.
What a beautiful you have create sir nice one
Thank you very much, I appreciate your comment.
perfection.......
Thank you very much, I appreciate your comment.
Greetings from Spain. That extraordinary door handle will still be intact when, 100 years from now, the door will be gone. Good work, man!
Thank you very much, I am happy that you liked it. Greetings from Australia.
So soothing to watch you Lad. I always try to learn 1 new nack when watching these kinda things. You've just taught me , drilling a counter sunk gives me penetration on a tack. Love it. Everyday is a school day 👍
Thank you very much, I am glad you liked it. I appreciate your comment.
God jub man. Nice & supper
From Bangladesh
Thank you very much, Greetings from Australia.
Dats a cool handle 👍🏻👊🏻
Thank you very much.
Great job! Love the 'hidden' welds that fasten the back plate on.
Thank you very much.
I'm into armwrestling at the moment and I made my first table out of common tubing and such but had the idea of using rebar and twisting it for the legs and you gave me an idea! Why not make the handles for the table out of the same twisted rebar with a metal knob on top! Thanks for the cool content sir!
Thank you very much, your table sounds like it will look great, I wish you the best for your project.
Very nice, I like your ideas.
Thank you very much.
Eres un fenómeno un genio
Muchas gracias, estoy feliz de que te haya gustado.
That was my favorite video among so many good ones that you have shared.
Thank you very much, I appreciate your comment.
Красиво получилось :)
Большое спасибо, я рад, что вам понравилось.
GREAT!!
Thank you very much.
That was just awesome thanks
Thank you very much, I am glad you liked it.
Интересные вещи делаете, креативные! ))
Спасибо большое.
@@GavinClarkdiy Thank You toooo! ))
Love your work! It's also nice to see someone else measure and measure again to get it right. Thank you for sharing! Cheers from Oregon.
Yes he is always precise He is a great guy I've been watching him for a while Always top notch on all his work
Thank you very much, I appreciate your comment. Greetings from Australia.
Thank you very much George, I very much appreciate your comment.
Love your work. Thanks
Thank you very much, I appreciate your comment.
You’ve inspired me to buy some rebar and dig out my mig welder!
@@gholmes182 I wish you the best for your projects.
Beautiful work! I look forward to seeing your new videos.
Thank you very much, I am glad you liked it.
Thank you for posting this video!
Thank you very much, I am glad you liked it.
Very nice brother tutorial ferfec the best videos 👌
Thank you very much, I am glad you liked it.
Good job Gav!
Thank's Jim
This requires both power and genius, doesn't it ? Greetings from 🇲🇦
Thank you very much, it really just needs a person that wants to make something, they will find a way. Greetings from Australia.
Beautiful !!
Thank you very much, I am happy you liked it.
Yes I did injoy it ! Just great idears ! What can I say ! 👍
Awesome! Thank you!
That looks great. And plenty sturdy.
Thank you very much, I am glad you liked it.
Thank you for your videos I in joy watching them !!
Thank you very much, I am glad you liked it.
Sos un genio....Muy prolijo, dedicado y ejecutado. Te felicito!!!
Muchas gracias, agradezco tu comentario.
Лайк! Просто шикарно!!!
Большое спасибо, я рада, что вам понравилось.
Parabéns pela obra de arte.🇧🇷🇧🇷🇧🇷🇧🇷
Muito obrigado, fico feliz que tenha gostado.
Parabéns ficou show ótimo trabalho sempre surpreendendo no seus projetos
Muito obrigado, que bom que gostou.
Great job 👏
Thank you very much, I am glad you liked it.
Nice work budy all the best.
Thank you very much, I am happy that you liked it. Keep safe
Thank IRONMAN. Hello, Island Canaries, Ocean Atlantic
Thank you very much, I am happy that you liked it. Greetings from Australia.
Comes with a life time warranty.
Hahaha, yes it probably does
That’s great. I would have twisted longer sections and cut them altogether, rather than have the four spread ends.👏
Thank you very much, I am glad you liked it. I have made handles like that, and thought they looked a bit plain, I thank you for your suggestion. Cheers!
Nice work overall and mostly your filing technique is spot on! Well done
Thank you very much, I appreciate your comment.
Great job , thank you so much for sharing
Thank you very much, I am happy that you liked it.
Me gusta las cosas que haces
Muchas gracias, eso es genial. Me encantan estas cosas y disfruto haciéndolo, me complace que tengamos los mismos gustos. Gracias por tu comentario.
I enjoyed it.
Thank you very much, I am glad you liked it.
outstanding job!
Thank you very much, I am glad you liked it.
Very Good!!!
Thank you very much.
Very nice work👌😀
Thank you very much, I am glad you liked it.
Salut, très bon travail monsieur technicien Merci.
Merci beaucoup, je suis heureux que cela vous ait plu.
Those small diameter rebar twisted together like that would make one helluva strong handle. I'd dare say you could bolt that to a small engine block and pick it up without bending it. Looks good too.🤛
Thank you very much, I agree the strength in twisted things is amazing, just like ropes made from weak fibres.