BMW F10 2016 9 Colours Ambient Lights Full installation Part 1

Hi all, in this video, I will show u how to install 9 colour ambient lights on the front door, for the rear and coding please watch part 2, thanks
please subscribe for more videos ....
I'm on Instagram as @yourambientlight.
Install the app to follow my photos and videos. www.instagram....

[@bmwf1152]

Nice Video i like how clean your interieur looks no dust or anything. Thats how a f10/11 interieur should look like!! I drive the same car bmw f11 530d from 2016 greetings from germany

[@billyowusu48]

Best video for ambient light installation so far. The rest made me damage my parts

[@depakkumarmistry7051]

Di you have to remove the glove box to get the wire over to the driver side ?

[@aliniazi5411]

Hi, only got the driver door and dash trim working not the other 3 doors

Can I replace just the top door interior ambiente light for a led stripe like that one, disconnecting the one I have and connecting a led one? Or I need a special device for the led lamps? Thanks

[@rrtonyl]

Where i can buy this led set?

[@ugurcengiz6932]

Wich stripes you use? Have you a link or something like that?

[@dubhighcut]

Where to buy the ambient lighting

[@hippocratesfarm5985]

I have a 2011 BMW X3 F25 xDrive 2d and I want to put those LEDs on it.
You can send me the links from where you bought them??

[@mohammedahmadma]

Where i Can buy this ?

[@chapogitske1235]

Where can i buy this led‘s?

[@maabebe9994]

Hi
How much you will charge for that?
Will travel to yours position.
London

[@yourambientlight]

I'm in Dublin Ireland

[@ferraszeni709]

I installed the CIC kit since my car is a 2013. I made a mistake and placed the wrong cable in the module splitter (instead of the idrive cable). Now that i wired it correctly, the idrice controller does not work nor are the lights powered (not even the foot light). Did i damage the module by incorrectly wiring it maybe.

[@aliawad1202]

Might have blown a fuse

[@igorromanovsky9565]

Hi. Isn't discunecting the airbags will give an error?

[@aliawad1202]

If you disconnect the battery first then no

[@TheCypriotSoldier]

Where are you based ?

[@yourambientlight]

Dublin Ireland

[@muzafarsadat7321]

Do i need to take off the batterie?

[@yourambientlight]

No if

[@billnguyen9337]

Is the installation the same for f32

[@yourambientlight]

For cabling yes for dor no ,as is different lights

[@billnguyen9337]

@@yourambientlight like how did you hook up the light for the back did you jump it off of the front door cable or how?

[@yourambientlight]

@Bill Nguyen is 1 cable that go from module (idrive) to all 4 doors and dashboard

[@adalet265]

Hello, how much would you charge this to my vehicle?

[@yourambientlight]

Where u based

[@adalet265]

@@yourambientlight redhill surrey how much would you pay for this vehicle

[@adalet265]

2012 f10

[@AliAbbas-pb7eo]

My ambient lights do not turn of once I lock the car any solution to this ?

[@yourambientlight]

the brown wire which at the input of the module connected to ACC,that will be ok

[@AliAbbas-pb7eo]

@@yourambientlight what do you mean I don’t get it

[@AliAbbas-pb7eo]

@@yourambientlight do I connect the brown wire of the ambient light module or the I drive controller ?

[@yourambientlight]

There's wire with the lights set ,1 go to black box 1 go to idrive and 1 to idrive original cable,u have to cut brown wire before go to box and that side connect to ACC in the fuse box ,but u have to extend as will be to short

[@AliAbbas-pb7eo]

@@yourambientlight I do not understand

[@llanelli80]

Hi can you tell me how to coding this

[@yourambientlight]

Have video

[@llanelli80]

Can’t se any video with the coding

[@yourambientlight]

@@llanelli80 watch all and u will find)))not have many

[@llanelli80]

I check all video and not see any thing about how to coding 🙈😀

[@yourambientlight]

@@llanelli80 i have f10 installation