Thank you for the video and introduction to WAMS. They are great and will work with you. I made a mistake of not unplugging my battery when i got my HMI back and it locked up my radio. They were kind enough to reprogram it for free. I just had to pay for shipping. Great company
Absolutely! Like I mention in the video, they are the ONLY company I will trust with this type of work. There are SO many things that can go wrong, security protocols, tamper flags, etc etc... and wouldn't have anyone else do this work.
Hey Phil! as always...one of the foremost and well informed guys around on these trucks!! What is the headlight/fog switch you have?? never seen it. Could you buy a replacement and send that in to them instead to limit actual down time of the truck?
Thanks! That headlight switch is the GM Switch that also has fog light + ORL (Off Road Lamp) switch. The switch is for trucks that have the Factory Roll bar and lights mounted above. Check out the video made by Tinkering Fox here - ruclips.net/video/4fESc7THdsQ/видео.html
Thanks. You just answer a bunch of questions I've had lately. I have 2018 Lt and I've trying to figure out what it would take for the ltz lights to work and the fog light/high beam. It was all good info I've been wondering.
I did the LTZ/High Country lights conversion on my truck, definitely need this upgrade if the resistors are gonna go out. Also love that you can program the windows to go back up
Since our trucks only have Express Up Driver side, that is the only window that can roll up with key fob lock. I am working on getting the passenger side integrated, and is in the works. The rear window key fob roll down has been disabled with this mod.
Hi Phil, question, I have a 2017 gmc sierra 250 Denali and I removed the aftermarket radio and have a Kenwood aftermarket radio. Can I have the BCM reprogrammed through wams? I have the hyper flashing issue. Also cost?
Do you have a video to show us how you program the BCM to add the heated and cooled seats? I installed the AN3 seats to my 2016 Yukon SLE, added the new center console with the control switches. Since everything was wired into the console, the only wire needed to connect to my truck was to the BCM and USB ports. So all the factory wiring is there. Just ordered a VX tech2 GDS2 programmer and curious about the steps needed to active the BCM communication with everything I have installed at this point.
Is the alarm system in the BCM? My ‘06 won’t allow fob programming, it kicks out of programming mode after 3 seconds every time I try. Door latches seem to be fine.
Nice video Phil! You hadn't posted any videos in a while. A few things I noticed, not about the BCM though. Did you remove the Denali cluster on your truck and what side mirrors do you have now? They kind of look like the side mirrors of the 2019 GM body style.
I've done lots since the last video upload and have been quite busy with customer orders. My Denali cluster is with WAMS in an effort to get Factory Trailer Brakes integrated :) I do miss that cluster. I should have it back soon. Hard to find free "me" time these days. LOL.
It's all good bro! You gotta do what you gotta do. Keep doing what your doing and glad to see we can make all these upgrades in our GM vehicles. Appreciate you man!
That’s amazing thank you man , I’m trying to look for the same one. I have the same part number. Can you please send me the link? Where can I get it? I really appreciate it
I have a 2016 Sierra that came with HID's I have installed aftermarket LED's and I don't have the "hyperflash" syndrome. I did not add any resistors or anything else besides the LED's.
@@crazygrady127 He didn't get it to work! I massage him privately in Instagram. No solution to the problem that sucks. Also WAMS is not doing BCM PROGRAMMING anymore. They didn't say why! It sucks too bud!
I have a 14 Silverado 1500 LT i was wondering if i can put in the pillar handel for the drivers side without modifying anything, I have the passenger one from factory
What if I just get the BCM from a high country and put in my work truck will it work that way or is programming the only way? Awesome channel btw, thanks in advance.
I was just talking about BCM programing the other day. My coworker was bragging about his heated and cooled seats and I figured it can't be that bad to swap them in. Turned out it wasn't really doable and I was bummed. Then I said "someone will figure out how to program these stupid BCMs" I have a 2014 Silverado 1500 LT regcab. I'd like heated steering wheel, heated/cooled seats, radio upgrade(I have the tiny useless one) and maybe a dash upgrade.
All very possible. I've done MANY heated/cooled seat retrofits. A majority of the trucks didn't come with factory heat, so those trucks, I couldn't get heat/cool to work. This is due to BCM programming first. Then, once the heat/cooled communication is made between the BCM and the heat/cooled module, THEN any of the missing wiring needs to be added. Heated steering is simple IF you have radio controls. It's a simple swap of wheel and clock spring. If you don't have radio controls, then there is more work ahead of you. If you have an HMI (behind the upper glove box), you're upgrade path would be easier than if you didn't have an HMI. Nonetheless, you have fairly large task of requirements needed.
@@philgamboa2906 thanks for the reply. Steering wheel is easy in have radio controls. HMI I'm unsure. Too bad a retrofit harness for the seats doesn't exist.
K C by that so you mean a harness that sits on the right side of the clockspring? I’m assuming there is a connector on the clock spring that is vacant and that is where the signal is for the radio? So what I need to do is purchase that and connect it to that plug then the plug will go the the steering wheel? To power the controls?
@@JamesSimmons1964 Yes - That's the main reason why I have my factory dash in. WAMS has my Denali Cluster and the trailer brake modules in an attempt to add it.
I have a 2018 gmc acadia and call the dealer they said the part was $600 something plus $200 to reprogram and on top of that they may need to diagnose the car and that another $145. I may also need a ECM so thats $200 something and even if I buy the parts it will cost $500 for them to i stall and program. I am thinking about buying a program one and then having a locksmith program the primary key then I have to reprogram the anti theft system myself with the key.
I have a 2016 Chevrolet LT cloth seats Plain Jane and I bought the interior from a high country truck and when I bought the interior they gave me the BCM along with the dash can I just plug that in my
I don't know what kind of service those guys sold you on.... Or if Chevy doesn't implement that stuff on their trucks but I can do the remote roll down and remote roll-up (although it is all four windows) on my 2016 Sierra factory. And the 20 minute remote start by holding the remote start a second time. You have a good looking truck but maybe consider GMC next time you trade in.
The handles are factory Escalade Handles. I have a video of that integration on my channel. The change I've done with them, is that I sent them to Crisp GM Customs (on Facebook) and had them retrofit Switchback LEDs. So now, they are on all the time at night (or when my headlights are on/manually turned on), and will flash amber when turn signals are used.
@@kyyo2642 yes. Initially tied to the turn signal. Then had them custom worked on with switchbacks. Then had them tied to running light (white), then amber when turn signal are used. Thought about them again for my 2021 truck I picked up a few months ago.
SUV platform uses similar Logic. Contact WAMS - www.whiteautoandmedia.com for more info. Since you have express up passenger, you can get your front windows to roll up with Key Fob lock :)
Yes sir! Hoping to know more in the coming weeks! Be on the lookout for that video if I can get to work. This does require BCM work and wiring/hardware change as well.
I have a 2016 GMC Sierra SLE my LED Lights were working fine and now i have this on my Dashboard Right Rear Turn Indicator Failure. Left Rear Turn Indicator Failure So far i have Purchase and install New Battery New Harness New LED Lights I took the truck to a local mechanic to have a diagnostic and the code was U0077-00 Something with the BCM If you could help me get to the bottom of this i will gladly appreciate it because the dealer in California wants over a grand
Great to see another video from you. Also, huge thanks for getting a center console to me. A huge improvement over the jump seat.
Thanks bud! Hard to find time for me these days :) But this one has been a long time in the making! Thanks for the business and support!
i reached out to them for a 2014 car BCM and they told me to go to the dealer, lucky you dude
Nice, been a long time coming. A big thank you too You and WAMS for sharing. Lots of work and patience...
Yes! Thanks for the kind words!
Thank you for the video and introduction to WAMS. They are great and will work with you. I made a mistake of not unplugging my battery when i got my HMI back and it locked up my radio. They were kind enough to reprogram it for free. I just had to pay for shipping. Great company
Absolutely! Like I mention in the video, they are the ONLY company I will trust with this type of work. There are SO many things that can go wrong, security protocols, tamper flags, etc etc... and wouldn't have anyone else do this work.
Great work Phil! Just awesome!!
Thanks Man! Express Up Passenger is in the works! Just need WAMS to hopefully get the BCM Cal side going.
Hey Phil! as always...one of the foremost and well informed guys around on these trucks!! What is the headlight/fog switch you have?? never seen it.
Could you buy a replacement and send that in to them instead to limit actual down time of the truck?
Thanks! That headlight switch is the GM Switch that also has fog light + ORL (Off Road Lamp) switch. The switch is for trucks that have the Factory Roll bar and lights mounted above. Check out the video made by Tinkering Fox here - ruclips.net/video/4fESc7THdsQ/видео.html
Thanks. You just answer a bunch of questions I've had lately. I have 2018 Lt and I've trying to figure out what it would take for the ltz lights to work and the fog light/high beam. It was all good info I've been wondering.
I did the LTZ/High Country lights conversion on my truck, definitely need this upgrade if the resistors are gonna go out. Also love that you can program the windows to go back up
Since our trucks only have Express Up Driver side, that is the only window that can roll up with key fob lock. I am working on getting the passenger side integrated, and is in the works. The rear window key fob roll down has been disabled with this mod.
Great vid bro👍🏾
Thanks man! Long time in the making for sure.
Nicely done! Thanks for sharing
Thanks!
Nice! Thanks Phil!
So long story short, GM has figured out how to monetize the DIY upgrades we've been doing for 100 years?
Hi Phil, question, I have a 2017 gmc sierra 250 Denali and I removed the aftermarket radio and have a Kenwood aftermarket radio. Can I have the BCM reprogrammed through wams? I have the hyper flashing issue. Also cost?
Do you have a video to show us how you program the BCM to add the heated and cooled seats? I installed the AN3 seats to my 2016 Yukon SLE, added the new center console with the control switches. Since everything was wired into the console, the only wire needed to connect to my truck was to the BCM and USB ports.
So all the factory wiring is there. Just ordered a VX tech2 GDS2 programmer and curious about the steps needed to active the BCM communication with everything I have installed at this point.
HoW did that turn out?
Is the alarm system in the BCM? My ‘06 won’t allow fob programming, it kicks out of programming mode after 3 seconds every time I try. Door latches seem to be fine.
Nice video Phil! You hadn't posted any videos in a while. A few things I noticed, not about the BCM though. Did you remove the Denali cluster on your truck and what side mirrors do you have now? They kind of look like the side mirrors of the 2019 GM body style.
I've done lots since the last video upload and have been quite busy with customer orders. My Denali cluster is with WAMS in an effort to get Factory Trailer Brakes integrated :) I do miss that cluster. I should have it back soon. Hard to find free "me" time these days. LOL.
It's all good bro! You gotta do what you gotta do. Keep doing what your doing and glad to see we can make all these upgrades in our GM vehicles. Appreciate you man!
@@estebanflores4697 Thanks man! #ModON!
That’s amazing thank you man , I’m trying to look for the same one. I have the same part number. Can you please send me the link? Where can I get it? I really appreciate it
Great video
Thanks!
How did you switch out the headlights to newer version? Did everything fit or did you have to replace the whole front end like grill ect?
I have a 2016 Sierra that came with HID's I have installed aftermarket LED's and I don't have the "hyperflash" syndrome. I did not add any resistors or anything else besides the LED's.
Hyperflash only occurs when LEDs are introduced to the turn signal circuit.
Are you going to put a video out on how to get the express up working on the passenger side?
Still a work in progress. :)
Did you ever get this feature working??
@@Lupillo131986 if he did I haven't seen it yet ?
@@crazygrady127 He didn't get it to work! I massage him privately in Instagram. No solution to the problem that sucks. Also WAMS is not doing BCM PROGRAMMING anymore. They didn't say why! It sucks too bud!
I don’t understand what the value add was. Did you delete AFM at least?
I have a 14 Silverado 1500 LT i was wondering if i can put in the pillar handel for the drivers side without modifying anything, I have the passenger one from factory
Yes. Many have done it. GM Sells the handle.
I know it’s an older video, but at 3:45 there’s what looks to be a card slot below the brake controller. Just curious what that is. Thanks.
Exactly what it is - a card holder. Some pit business cards there or this fleet vehicle gas card.
What if I just get the BCM from a high country and put in my work truck will it work that way or is programming the only way? Awesome channel btw, thanks in advance.
Won’t work. It’s programmed to the ViN
I was just talking about BCM programing the other day. My coworker was bragging about his heated and cooled seats and I figured it can't be that bad to swap them in. Turned out it wasn't really doable and I was bummed. Then I said "someone will figure out how to program these stupid BCMs"
I have a 2014 Silverado 1500 LT regcab. I'd like heated steering wheel, heated/cooled seats, radio upgrade(I have the tiny useless one) and maybe a dash upgrade.
All very possible. I've done MANY heated/cooled seat retrofits. A majority of the trucks didn't come with factory heat, so those trucks, I couldn't get heat/cool to work. This is due to BCM programming first. Then, once the heat/cooled communication is made between the BCM and the heat/cooled module, THEN any of the missing wiring needs to be added.
Heated steering is simple IF you have radio controls. It's a simple swap of wheel and clock spring. If you don't have radio controls, then there is more work ahead of you. If you have an HMI (behind the upper glove box), you're upgrade path would be easier than if you didn't have an HMI.
Nonetheless, you have fairly large task of requirements needed.
@@philgamboa2906 thanks for the reply. Steering wheel is easy in have radio controls. HMI I'm unsure. Too bad a retrofit harness for the seats doesn't exist.
Off topic but do you know anything on swapping steering wheel from a work truck model to some with radio controls
You need the right clockspring harness for the wheel radio controls it’s plug&play
Yes - www.gm-trucks.com/forums/topic/192664-wt-trim-with-color-dic-steering-wheel-controls-io5-stereo-retrofit/?page=5
K C by that so you mean a harness that sits on the right side of the clockspring? I’m assuming there is a connector on the clock spring that is vacant and that is where the signal is for the radio? So what I need to do is purchase that and connect it to that plug then the plug will go the the steering wheel? To power the controls?
Hello. I noticed a slot with what looked like a card in it. My 2016 gmc sierra has it but, I no clue what it's for.
Phil . . . what made you switch back to the original dash cluster (from your Denali upgrade)?
It is only temporary :) - My Denali cluster is with WAMS in an effort to get Factory Trailer Brakes added.
@@philgamboa2906 Are you coming out with a solution for the trailer brake assist along with the BCM upgrade?
@@JamesSimmons1964 Yes - That's the main reason why I have my factory dash in. WAMS has my Denali Cluster and the trailer brake modules in an attempt to add it.
@@philgamboa2906 I can't wait for that mod . . . thanks Phil!!
Any luck on the factory brake controller?
Were you able to retrofit the passenger window “express up” function?
Yeah I would love to see video for this.
Phil, have you ever heard of someones cruise control not working above 60 ish?
I have a 2018 gmc acadia and call the dealer they said the part was $600 something plus $200 to reprogram and on top of that they may need to diagnose the car and that another $145. I may also need a ECM so thats $200 something and even if I buy the parts it will cost $500 for them to i stall and program. I am thinking about buying a program one and then having a locksmith program the primary key then I have to reprogram the anti theft system myself with the key.
I have a 2016 Chevrolet LT cloth seats Plain Jane and I bought the interior from a high country truck and when I bought the interior they gave me the BCM along with the dash can I just plug that in my
Are the led taillights plug in play or does it have to be programmed for them to work
If you want hyperflash to truly go away, get the BCM programmed.
Hi I have 2018 Tahoe flood. I can't not start the car I bought new bcm can you programming? And how much cost
How about an ECM? We put a new one in our pickup and it won’t start. The theft deal comes up and it won’t start.
Please can you tell me what year is that truck , i was looking for those nice mirrors and handles but i can't find it. Thanks
My Truck is a 2016.
I don't know what kind of service those guys sold you on.... Or if Chevy doesn't implement that stuff on their trucks but I can do the remote roll down and remote roll-up (although it is all four windows) on my 2016 Sierra factory. And the 20 minute remote start by holding the remote start a second time.
You have a good looking truck but maybe consider GMC next time you trade in.
I want to order but is asking for auto sync serial number ??
Does anyone know where to get bcm Programmed? WAMS says they don't program below 2014. Need help with led hyperflash
Will this allow me to turn off my running lights on my canada truck
Troll Trama - I believe so. Send an inquiry to www.WhiteAutoandMedia.com
Awesome. I did notice that your cluster isn't the Digital one anymore. Why did you swap it back to the analog one?
Denali cluster is with WAMS for other work. Trying to get Factory Trailer Brake integrated. :)
DOES THE BCM DO ANY FUNCTION TO ONSTAR NOT CONNECTING
Have any info on the led lights in your door handles?
Those are Escalade door handles. He had to have them color matched.
@@BattleBornDmax thanks easy to wire in?
Screws Loose Performance Not plug and play. Have to tap into existing wiring harness.
The handles are factory Escalade Handles. I have a video of that integration on my channel. The change I've done with them, is that I sent them to Crisp GM Customs (on Facebook) and had them retrofit Switchback LEDs. So now, they are on all the time at night (or when my headlights are on/manually turned on), and will flash amber when turn signals are used.
What is the 1 or 3yr update?
Where did you get those door handles ?
eBay - They are factory escalade illuminated door handles.
@@philgamboa2906 Are they tied into the turn signal? I wonder if they have them for 2021..
@@kyyo2642 yes. Initially tied to the turn signal. Then had them custom worked on with switchbacks. Then had them tied to running light (white), then amber when turn signal are used. Thought about them again for my 2021 truck I picked up a few months ago.
@@philgamboa2906 Any additional or links that you could provide would be awesome. I love that mod ! Looks awesome
@@philgamboa2906 any videos on the switch back door handles. That would be a cool thing to have.
Man how can I disable magnetic ride shocks ?
I hate you.. ltz with every option except 4 ... and you still make me want more lol btw the wireless charging upgrade harness works perfect .
:) Thanks!
@@philgamboa2906 I'm interested in the auto functions on passenger window or, even being able to dim the rear camera display
I've passed 122mph and backed out of the gas on my 2016 Sierra without cutout
Would this work for my 2015 tahoe lt
SUV platform uses similar Logic. Contact WAMS - www.whiteautoandmedia.com for more info. Since you have express up passenger, you can get your front windows to roll up with Key Fob lock :)
Obviously got a huge discount for making this commercial, I program modules all the time and it is not a big deal
Does this work for a 2014 Silverado?
This is no longer an offering from WAMS at this time. No word on when it will be resumed.
Is that the only company that does this ?
Phil..do you have FB?
Yes - Facebook.com/HarnessDR
Hey what’s white auto contact number, I’m having the hyper flash problem?
Email only.
i have the Same Black 22" Rims for my Tahoe Summer
for Winter Denali 20" snow Flake
Phil your the man👍are you making a express up for the passenger side window 🤔
Yes sir! Hoping to know more in the coming weeks! Be on the lookout for that video if I can get to work. This does require BCM work and wiring/hardware change as well.
@@philgamboa2906 also waiting on this lol
Did you figure out the express up for your passenger windows?
For real waiting for this
need to do this for 2017 Tahoe LS
I have a 2016 GMC Sierra SLE my LED Lights were working fine and now i have this on my
Dashboard
Right Rear Turn Indicator Failure.
Left Rear Turn Indicator Failure
So far i have Purchase and install
New Battery
New Harness
New LED Lights
I took the truck to a local mechanic to have a diagnostic and the code was
U0077-00 Something with the BCM
If you could help me get to the bottom of this i will gladly appreciate it because the dealer in California wants over a grand
thats replacing not programming
guillermo carrillo - I’m not replacing the BCM. It’s been custom programmed.
These new trucks have way too much SH*T on them
You ain’t lying.