Giveaway Bike Update 16/03/23 - Suzuki Bandit Cafe Racer - ASBO Project
HTML-код
- Опубликовано: 16 мар 2023
- All the lates news and plans on the give away bike and I also put in a call to the MSVA test centre...
SOMEBODY IS GOING TO WIN ASBO - That's right, somebody who supports the QuickBikes channel and the bikes I'm building is going to be the proud owner of a completely custom built Suzuki Bandit Cafe Racer once it's finished. I'm giving away ASBO to celebrate hitting the 10,000 subs mark to somebody who supports the channel.
To stand a chance of winning the bike once its finished, simply donate £10 to the channel using the PayPal link - www.paypal.com/paypalme/Quick...
Where it says "What's this payment for?", enter "Supporting the channel". That way I know what the payment is for and I can make sure your name goes in my hat.
You can donate as much as you like and each £10 donation to the channel will get you another chance to win the bike as you're supporting us that much more.
If the winner is not in the UK, I can crate it up etc, but the shipping will be their responsibility. If you're in the UK, we'll be able to arrange something.
Please, please, please like and share this video as it will be setting the budget to finish the bike and hopefully raise some additional funds so I can include some spanky bits in the build. The bigger the budget, the better the bike you might end up with.
THIS IS NOT A RAFFLE...
You won't get a ticket or a sticker in the post, but I'll publish a list of names regularly, so you know you you've been entered. Somebody who has chipped in will be randomly picked once the bike is finished and as a thank you for supporting us will be the proud new owner of ASBO.
The very BEST of luck to you if you chose to join in and help support the channel 😁👍
*******************************************************************************
Other ways to help support the channel -
SHARE, COMMENT & SUBSCRIBE
Become a Patreon - / quickbikes
Merchandise - teespring.com/stores/quick-bi...
FaceBook - / youtube.quick.bikes
Instagram - / _quick_bikes_
PayPal - paypal.me/QuickBikes
Music used on the channel
Bendound is a great resource for royalty free music that you can use on your videos and I'm now using them. Some are free to download whilst others you have to pay for, but they're well worth checking out as you're bound to find what you're looking for. Check out - www.bensound.com/
Funk Cool Groove by MusicToday80
• Video
Title: Funk Cool Groove
Type of music: Funk
Mood: Happy
Download: theartistunion.com/tracks/dc2197
Protofunk
• Protofunk - Kevin MacLeod
Author: Kevin MacLeod
Website - incompetech.com/
Royalty Free Link - incompetech.com/music/royalty...
Genre Link - incompetech.com/music/royalty...
Song - "Aces High" Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 3.0
creativecommons.org/licenses/...
Retro 80's Funky Extended Version
• Video
Aces High
• Royalty Free Music - A...
• Protofunk - Kevin MacLeod
Author: Kevin MacLeod
Website - incompetech.com/
Royalty Free Link - incompetech.com/music/royalty...
Genre Link - incompetech.com/music/royalty...
Song - "Aces High" Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 3.0
creativecommons.org/licenses/...
C Funk
• Royalty Free Music - C...
Author: Kevin MacLeod
Website - incompetech.com/
Royalty Free Link - incompetech.com/music/royalty...
Genre Link - incompetech.com/music/royalty...
Song - "C Funk" Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 3.0
creativecommons.org/licenses/...
Gas Pedal
• Gas_Pedal ~ Royalty Fr...
Fork and Spoon
• Royalty Free Music - F...
Author: Kevin MacLeod
Website - incompetech.com/
Royalty Free Link - incompetech.com/music/royalty...
Genre Link - incompetech.com/music/royalty...
Song - "Fork And Spoon" Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 3.0
creativecommons.org/licenses/...
Cool Energetic Stylish Funk Background Music For Videos
The Funky Music
Get this music: bit.ly/2MpoTCP
Funkorama by Kevin MacLoed
Music by Kevin MacLeod. Available under the Creative Commons Attribution 3.0 Unported license.
Download link - incompetech.com/music/royalty...
The Jam by Slynk & Mr Stabalina
/ @slynk 
Авто/Мото
To smooth the inside of the ABS velocity stacks, a bit of acetone on a lint-free cloth will do the trick, don't put too much on as it will melt.
Thank you matey 👍
ABS is badly affected by alcohols (more by methanol than ethanol) and petrol. It loses over 95% of its tensile strength so you might want to rethink the velocity stack material. The point of the stack is to contain the fuel that gets pushed back out of the carb when the valve shuts so they get showered in fuel mist. PLA is more resistant to ethanol but is not resistant to petrol. Polypropylene is resistant to both petrol and ethanol which is why air boxes from OEMs are made of it.
Ah right .. To be fair this will be on for one run only, so as long as it last that long it could be made out of marshmallow for all I care lol
I'll see what filament Matt has though as if Polyprop I'd available, we may as well use it. Thanks matey 😁👍
Loving this project, got my first bike (at 40 years old) last November, had it out for a few spins and in January I broke me feckin collarbone (not bike related, slipped on some ice) Can't wait to get back on it, these videos help keep me going. Loving the channel Quickie :-) (Doctor says another 3 weeks) 🙂
Edit: Bike is a 2003 FZS600 Fazer
Oooooo collarbone... I've done mine a few times now leaving them all lumpy and bumpy. I hope you heal up quickly matey and thank you very much for watching the channel 😁👍
It looked like del had marked it up for you with his sharpie😂 keep up the good work fella 👍
Hehehe... Luckily, I just burnt it off again 🤣😂😅
Have made loads of aluminium bicycle handlebars using the sharpy method, always works for me.
I never knew it was a thing..!!
Printed mine in TPU...soft so can be clamped, and made to fit the pods on the ends. Rode with ’em on for a summer, held up to heat and petrol beautifully
Good to know, thank you matey. It only has to last for one run at the end of the day 😁
If i were lucky enough to win that bike ,my neighbors will have the joy of waking up every day to the sound of freedom lol
Hehehe... 🤣😂
So happy to support you sir , my family all have COVID and its kicking our ass.stay strong all the best mate .
Much appreciated matey, thank you 😁👍
if you are using bar end indicators I dont think you need them at the back as well as they are visible from the front and the back
Somebody else has said that, in which case this just got a bit easier 😁👍
Best of luck mate; loving the series.
Thank you matey, and thanks for watching 😁👍
I'm sure I saw somewhere that using plan soap and heating it till it goes brown is a good way to tell when aluminium is heated to the right temp.
You can get heat crayons apparently... When they melt on the panel, it's up to temp and.tou get different temp crayons...
You can’t beat a bit of ‘flange’ 😂
Hehehe 😂🤣😅
Just a thought, if the stacks work in ABS you can actually get them 3d printed out of metal or titanium from companies online that commission prototyping jobs.
It's an idea, but I'd rather just turn them myself if we go that route. I'll give the cad drawing to the new owner if they want it so they can get them made 😁👍
Regarding your licence plate cone that wouldn't unfold, make a thin slit in the CAD model where you want the seam and it should then unfold
I did that in the end matey, thank you 😁👍
Hope your feeling better mate.:-)👍🏻
A bit better today... I just have NO energy at all 🤣😂
I know that feeling mate and I haven’t even got Covid.😂😂😂
👍
😁
I am a latecomer to your channel but I am dead jealous of your amazing setup. Much better than my 'tit in a shed' setup on my channel. I am looking forward to catching up with your work. It looks great.
Thanks for watching matey 😁👍
Suggest you clamp it on the pipe and test the noise level before welding it on.............
That's the plan matey 😁😊
angle it to the seat brace... the higher option.... no brainer. anyone that says different is wrong. :D. Where did the bit of exhaust come from, the stepped bit? if ebay and it isnt as described or requested, open a dispute and get it refunded. the more sellers get away with selling crud, the more theyll do it....
I'll end up using it at some point, so no Biggie really 😁👍
I would've kept YT out of the Sva conversation and communications, might invite an over zealous inspect.
There's nothing wrong with that in my book... At least you'd know it's bang up to scratch hey 😁👍
Just for the test couldn't you just get 3 more o.e. air box velocity stacks instead of getting 4 made fella?
These are only getting used on the Dyno matey. The bike will have the new exhaust system and pod filters fitted for the MSVA test
Waffle away
Hehehe 😂🤣