please turn H.265+ or H.264+ off as this will cause that , also under hik connect on network > advanced > platform access , turn it off to check the encryption is not causing the issue 😊
Thanks for this, was having problems with a different RTSP format and tried the one you provided without authentication in the URL, worked first time and is perfect!
Thank you so much! I couldn't figure out what the URL was exactly till I watched your video. Now everything works great. Have to wait for it to stream and can't get it to be high bitrate on wireless but that's a network issue, not a camera issue.
I am trying to embed the http snapshot image into a webpage but because the URL doesn't end with .jpg the image doesn't want to load. Are there any other ways to get this to work?
Hi Dave, so I have gotten streaming working on VLC and another third party platform I use. In order for me to do that, I had to deselect encryption stream. So..if I wanted to leave encryption stream enabled, what would the rtsp string look like. I have the stream encryption key but cannot find documentation on how it would be typed or where it would be typed into the string command. The download file does not address it either. Maybe it is not possible to third parties. Thanks in advance
Great Video @dvsltd - However, none of these options, either RTSP or HTTP work for me. When I go to the web interface I cant see the CGI option? Any ideas?
Hi, This is driving me mad. I have tried everything, I cannot get an RTSP stream from VLC to work. I have a Hikvision NVR DS-7698NI-I2/8P with NVR4.0 and I've tried using the URL: rtsp://admin:****@192.168.1.115:554/Streaming/Channels/101 VLC just doesn't show anything but also doesn't show any error as-if it should be working. Please, any advice, I've been trying for ages to get this to work.
under the NVR web browser , under security set the RTSP and web from basic to basic / digest , and turn off HIK-Connect stream encryption if enabled, also make sure H.265+ is not enabled, if so change to H.265 😊
I have a setup with a DS-7604 NVR, can this method be used within the Hikivison NVR to pickup a remote IP camera at a different location? So it shows as like another camera substream ?. Great video
It's incredible how hard they make this. We need a guy from a shop showing us a word file to explain this basic functionality... They should just put auto-generated links to the different streams in the settings.
I might have missed it somehow but did you ever explain where to get the exact URL for a hikvision IP camera? Specifically the "/Streaming/channels/" part? Is that just a standard convention that all IP cameras follow? You explained the number and I understand the rest of the URL, it's just that one very specific part that I don't know if it's the same thing for every camera, or if you have to find that information in your camera's web interface somewhere. Thanks!
Hi, hope you’re alright. Pls how can I get the RTSP for MIPC /IPCAM outdoor camera and Google Nest Camera? I want to integrate them to my Home Assistant dashboard.
I can’t access the ip cameras direct when they’re plugged into the nvr, the up cameras connect via the network and not direct work. No password need for some reason on mainstream?
Is it possible to access the RTSP streaming from a hikvision IP camera connected to HikCentral Professional, like a DVR? How? Does it need any special configuration in HikCentral Professional? I couldn't connect with you examples.
What cameras is this compatible with? We have been searching for an NVR camera system that works with OBS using RTSP to stream to Facebook live and so far we have bought two sets from Amazon and both have been rubbish and can’t get it to work at all. Totally stuck. 🤦🏻♀️
@@DVSLTD thanks for replying... this is really helpful. We have a very limited budget can you recommend the cheapest camera system that supports RTSP? Feel free to email. Portaltotheparanormal365@gmail.com
This is a good video. However, I have noticed a problem with HIKVision and their PVR's esp. in relation to the onboard PoE switch. It places those devices on a different network the LAN port which I have connected to my broadband and there appears to be no bridging between the two? I take it the only resolution is for all cameras and the NVR to be connected to the PoE switch such that IP addressing for the cameras and NVR can occur on the same subnet as the rest of my network such that I am then able to access those cameras via a stream on my network and beyond? any confirmation greatly appreciated. It's a shame in a sense that the onboard PoE will be defunct and in effect the PoE port capacity really serves as an indication of throughput i.e. the more native PoE the higher the throughput - however I digress!. Great videos by the way. You guys are good. - liked and subscribed :)
Thanks for the nice feedback , the virtual LAN for the on board POE is indeed separate and not connected to the LAN , do you want to take RTSP streams for each camera as you can still do this via the LAN connection of the NVR
Great info. Does the camera need to be connected to a hikvison NVR or can then just be connected to the network for this SRTP workflow to work? For instance I have a 2MP Cube camera I would like to embed into a webpage.
So far, so good, but you didn't show the resolution of that rtsp streaming (in vlc... Information... coding) Some dvr can only stream 720p. I am intersted to know if there are dvr with 1080p resolution for rtsp streaming.
A question: if i add this live stream to my real website and then disconnect my pc, will i still be able to visit the website and watch that live stream ? Or pc and vlc must be open all the time?
It depends on how this is done, if you do it VLC via the PC then yes that needs to be running but most will port forward the camera so its open on the router , and pull the RTSP direct from the camera to the web service
Thanks for this very helpful video - I now have my stream embedded in my website but only one person can veiw at a time - is there a way to enable multiple views?
Hii Dave, is the HIKVision model DS-2DE442IW-DE can stream to vlc too? cause till now I cannot stream the camera to VLC player. I have follow your instruction but is not working for me. Is any others suggestion for me? Thank you
I have a Hikvision camera connected to OBS. It is displaying the date and time stamp on the output. The address we have in OBS is the IP and port but we haven’t got “streaming” etc How can we remove the date and time stamp?
How can I get the max and min temperature values read with programming any language by the thermal camera. Is there any API (or something else) available for this
hi, do you know how to get the feed from particular given time interval using rtsp link, I am using the exact software to access the camera as you are using, thanks
Hey! I tried it with different options but it's not showing anything on vlc and when I tried with http on web browsers it shows that site cannot be connect. What the problem could be?
hi there! thanks for the video. ... Why in vlc a 1080p camera shows shrinked like 1080x1920 (1080 width). I shall rotate the cameras for optimal view?? 16:9'ish?
Hello ! Thanks really helpfull, I have an issue, it works just when I am connected on local connection, and when I try with other connection it doesn't works, any ideas ?
Thanks for the help! I got this setup with your help. I can view 3 cams, main or sub streams just fine but when i view channel 0, the resolution is rubbish. Any way to change that?
Hello, not sure if this was asked but Im trying to view the stream in home assistant, It works fine on Iphone but when I try to view it on browser with HA it doesnt work. I have to change encoding to 264 for it to work. Is there a way to make it work with 265 ?
Hi, thank you for this video. I have a question, do you know if the 'Integration Protocol' (where you enable Hikvision CGI) is available for all cameras?
Hi there. I have a following model DS-7216HUHI-K2. I have enabled 3 analog cameras and 3 IP cameras connect to the system. How can i differant the RTSP command for the 3 analog cameras and 3 IP cameras to view through RTSP?
I am use a hikvision DS-2CD4A26FWD-IZ/P with ip remote, because it's not in my same lan network. When I open the address from my browser explorer, I can see image without problems, but when connecting it to my application c #: NVRCsharpDemo, it does not allow me to connect. I need help with this, please, I am a rookie programmer.
@@DVSLTD Wow thanks Dave! Though I have to admit, I was configuring a new iDS DVR with the webUI just to find out that some functions are only on the local ui ahah (also the BNC output did not work until the wizard on the local ui was closed 🙄, drove me nuts troubleshooting). Would it be possible to have Hik include everything in the webui in the future? (thinking of others that will have the same issues). Good day!
Then you would type this into VLC for instance which worked for me - rtsp://admin:your PW@NVR IP address:554/Streaming/channels/101 assuming 554 in the RTSP port of the NVR
could you please help me, I can´t enable RTSP on this DVR Hikvision model 7204hqhi-k1 it just Don´t have the options like in the video also all times I have tried to Streaming it with VLC trows me that i can´t Open regards!
Hi, Is that protocol support for DVR DS-7332HGHI-SH? if yes, pls show me how. and i need to send the photo of line crossing to send out to Telegram through this protocol. thank for your help.
Hi, we support RTSP across most of the products , regards line crossing can you not use email as it will attach 3 images then , the RTSP protocol is the same as the video , there is a document I can send if you like?
Pode ser utilizado junto com o obs Studio para fazer transmissões ao vivo, há também serviços de gravação em nuvem que fazem uso deste recurso para se conectar às câmeras ou aos canais dos DVR
Hi! I have tried http streaming, is working but only 1 user can see the cam, next user will see error msg until first user close the browser. any solutions? Thank you!
Can the RTSP stream be used with DDNS address? Would the address be substituted for IP address in the same format? I want to stream from a remote location where I am unable to get a static IP from a mobile SIM router.
In theory yes , you would use same stream but substiture the IP address with DDNS , we have had it working before along time ago , so only presume its still ok
@DVSLTD I am also trying to stream directly from HikVision IP camera on website without using any NVR. I tried every thing but could not get success. Can you please help me here. I have camerais running on POE switch without any NVR. it is accessible through HikVision app but not accessible directly on webpages.
http Streaming channels not working . its say "Access Error: 404 -- Not Found" . how can give access to http channel. rtsp working fine i getting problem on httppreview
Thank you for this useful tutorial. I can get everything to work apart from the http-with-embedded-login URL. Mine is the same structure as yours but I still get asked to log in [by Safari on MacOs].
is the port for HTTP still set to 80? If changed you need to use the :81 for instance or whatever port is being used, also can you use HTTPS ?, if so login and check that http has not been disabled inside the configuration menu of the device and network 😊
Hi, Great video.When using VLC player, I can get the stream with no user name and password but can not get it to work when embedding those details. I know I have the log in details correct but it will just not work..... Any thoughts ?Cheers Dave
@@DVSLTD Thanks for coming back to me so quickly. We have a # in the password so maybe thats it...I will give that a go. My NVR is a DS-7308HUHI-K4, I don't seem to have the same Intergration Protocol settings as shown in you video and wondered if this was a problem as well. I only have the ONVIF enable and no Hikvision CGI settings.....
@@DiggerDave1968 That’s ok , yes try the password without the # and see if this improves it , you will also need to disable the verification code in HIK-Connect if enabled as that stops this working. Also on the web interface of the DVR under security set RTSP Authentication to digest/basic , and under network and advanced , network service , make sure RTSP is enabled , and use H.265 not H.265+ 😊
Username from Url is used but correct password is ignored Hi there. First of all many thanks for the great video!! But... I am using this URL: rtsp://Username:Password@IP-Adress:Port/ch1/main/av_stream in VLC. When hitting "Play", a "RTSP Legimit" window pops up. In the window the Username is already there, but password keeps blank. Entering the password in that upcoming window allows opening the stream. I double / tripple checked the users password in that URL is correct. So from the above URL username is taken over, but Password not. What is wrong (with me :-) ) I have tried it on Windows 10 and iPad Pro, both run most current VLS Player Can you please help
Hi peter, the stream to use username and password would look like this , please make sure the “encryption stream “ is off if using HIK-Connect also rtsp://Hikvision:guest@173.200.91.70:10554/Streaming/channels/1701 - get the main stream of the 17th channel (1st IP camera on the Hybrid Demo) rtsp://Hikvision:guest@173.200.91.70:10554/Streaming/channels/1902 - get the sub stream of the 19th channel (3rd IP camera on the Hybrid Demo
@@mjair2009 We can use this on some devices, please make sure on latest firmware the RTSP function is enabled on the web interface and channel zero is supported and setup rtsp://IP:port/ch00/main/av_stream
hey hello good day, i have a question i have DS-KIS602 hinkvision and i would like to see on the screen my other ip camers about rstp. is this possible and if so how I hope you can help me and mischie can make a video of it. thanks.
you can do this. are they HIK cameras ? not tested no hik models but under device you can add device and select DVR / NVR , and then IP of that device , then channel number
it be ubiquiti cameras, and i have an rstp link from each camera but i don't think i can fill in this link if possible, can you show me how this works?
Hi guys, wondering if you can help me. We actually just opened an account with you recently lol. Came across this tutorial but keep getting stuck when it comes to getting the video interfaces into my website without using a third party to restream it. I've the rtsp stream working and I've also a sub stream set to mjpeg. I'm having issues I think as I can not use without authentication. This I believe is only using one person to view due to the user details being entered and also this needs to be copied and pasted into my browser and not embedded into my webpage. Then again I'm running wordpress and there is and addon for embedding a web cam which in essence this is and it says ti enter my link. If gives an example without authentication. Suppose fist question is how to remove the need for authentication as this is stumping me or is there an easy way to integrate into my site and I'm missing it. Thanks in advance guys!
Hi Bro, This normally is when the web components fail , please try going to control panel and uninstall , then uninstall the web components, then open IE and go to settings and clear the browser cache , close and re-open , browse to the IP address of the DVR/NVR and reinstall the web components , close and re-open the IE and this should work , if still doesn’t work it could be port 554 ( or whatever has been used) is blocked / not forwarded , or if using old IE like IE 9 , then in IE options run it in compatibility mode, this should help
@@DVSLTD I have tried to my wits end to get the third stream rtsp using channel 103 on DS-2DE4A220IW-DE, but I still cant access it. Do you have any other suggestions? Thanks so much for your reply.
I am getting only one camera stream out of 4 cameras i am connecting from other network i have a public ip abd i put correct chanel nber and ip address
Hi, this depends on the model used, it’s mainly used for 3rd party integration , some models you have login to the camera and enable the 3rd Stream , is this enabled?
@@DVSLTD Yes, it is enabled in the camera. Third party integration is the reason I want to use it. I do have the cameras connected to a Hikvision NVR and I have virtual host turned on, but I can't find a way to get the RTSP feed from the third stream. Thanks in advance.
I am going to make a million dollars some day once I am able to interpret these directions for novices like myself for whom most of this is too fast, too obscure, too geeky.
Hi, I am triying to get video from my DVR Hikvision to vmix, by RTSP, I did it but the image of the camera shows a gray screen interference
please turn H.265+ or H.264+ off as this will cause that , also under hik connect on network > advanced > platform access , turn it off to check the encryption is not causing the issue 😊
@@DVSLTD Thanks very much my brother, God may bless you. I apreciate so much your help.
@@MinisteriosJesusTVhn No, thank you for watching!!!
green screen interference. H.264+ is turn off already DVR analog HD
@@DVSLTD No way to have Hikconnect platform access and RTSP with no grey screen interferences together at the same time?
Thanks for this, was having problems with a different RTSP format and tried the one you provided without authentication in the URL, worked first time and is perfect!
Thank you so much! I couldn't figure out what the URL was exactly till I watched your video. Now everything works great. Have to wait for it to stream and can't get it to be high bitrate on wireless but that's a network issue, not a camera issue.
my favorite guy to learn things from
Thank you 😊
Thanks for the video. Don't think I would have every figured this out without your help.
Detailed video from an experienced person !! Davis, I'm a great fan you Man !!
I am trying to embed the http snapshot image into a webpage but because the URL doesn't end with .jpg the image doesn't want to load. Are there any other ways to get this to work?
Hi Dave, so I have gotten streaming working on VLC and another third party platform I use. In order for me to do that, I had to deselect encryption stream.
So..if I wanted to leave encryption stream enabled, what would the rtsp string look like. I have the stream encryption key but cannot find documentation on how it would be typed or where it would be typed into the string command. The download file does not address it either. Maybe it is not possible to third parties. Thanks in advance
I don’t believe we can do it with verification code included
@@DVSLTD OK, thanks Dave for clarifying. I could not find it anywhere. Sure would be nice if we could.
Great Video @dvsltd - However, none of these options, either RTSP or HTTP work for me. When I go to the web interface I cant see the CGI option? Any ideas?
if you edge with internet explorer mode enabled , does that work???
Thanks for the document and this great informative video.
Thank you so much! Best regards from Brazil.
Thank you so much it was amazing your explanation...
Hi, This is driving me mad. I have tried everything, I cannot get an RTSP stream from VLC to work.
I have a Hikvision NVR DS-7698NI-I2/8P with NVR4.0 and I've tried using the URL:
rtsp://admin:****@192.168.1.115:554/Streaming/Channels/101
VLC just doesn't show anything but also doesn't show any error as-if it should be working.
Please, any advice, I've been trying for ages to get this to work.
under the NVR web browser , under security set the RTSP and web from basic to basic / digest , and turn off HIK-Connect stream encryption if enabled, also make sure H.265+ is not enabled, if so change to H.265 😊
I have a setup with a DS-7604 NVR, can this method be used within the Hikivison NVR to pickup a remote IP camera at a different location? So it shows as like another camera substream ?. Great video
It's incredible how hard they make this. We need a guy from a shop showing us a word file to explain this basic functionality... They should just put auto-generated links to the different streams in the settings.
Thanks for your input , we are not a shop either. Thanks 😊
@@DVSLTD oh ok, I assumed you were. Absolutely no critics to you, I've learned so much through your videos.
I might have missed it somehow but did you ever explain where to get the exact URL for a hikvision IP camera? Specifically the "/Streaming/channels/" part? Is that just a standard convention that all IP cameras follow? You explained the number and I understand the rest of the URL, it's just that one very specific part that I don't know if it's the same thing for every camera, or if you have to find that information in your camera's web interface somewhere. Thanks!
Hi, hope you’re alright. Pls how can I get the RTSP for MIPC /IPCAM outdoor camera and Google Nest Camera? I want to integrate them to my Home Assistant dashboard.
My life is now save ! kkkk thanks !
Excellent 😊
Many tnx for this tutorial! i will try things soon as i struggle for so long time to get things work.
In case anyone wondering Hikvision does not support this for encrypted stream, they need you to disable your security for it to work
Thanks a lot. Very useful information.
I can’t access the ip cameras direct when they’re plugged into the nvr, the up cameras connect via the network and not direct work. No password need for some reason on mainstream?
so you want to pull the RTSP stream of the camera via the NVR correct? Its possible using this video method
Is it possible to access the RTSP streaming from a hikvision IP camera connected to HikCentral Professional, like a DVR? How? Does it need any special configuration in HikCentral Professional? I couldn't connect with you examples.
What cameras is this compatible with? We have been searching for an NVR camera system that works with OBS using RTSP to stream to Facebook live and so far we have bought two sets from Amazon and both have been rubbish and can’t get it to work at all. Totally stuck. 🤦🏻♀️
We have hik cameras that have RTMP firmware , check out our channel for the latest video
@@DVSLTD thanks for replying... this is really helpful. We have a very limited budget can you recommend the cheapest camera system that supports RTSP? Feel free to email.
Portaltotheparanormal365@gmail.com
@@portaltotheparanormalpttp Hi and thanks, all our IP cameras support RTSP output , the cheapest models are the DS-2CD21 series to be honest 😊
@@DVSLTD thank you, your a star ⭐️
@@DVSLTD what’s the difference between HiLook and HiWatch? I’ve seen this type of Hikvision cameras a lot online.
This is a good video. However, I have noticed a problem with HIKVision and their PVR's esp. in relation to the onboard PoE switch. It places those devices on a different network the LAN port which I have connected to my broadband and there appears to be no bridging between the two? I take it the only resolution is for all cameras and the NVR to be connected to the PoE switch such that IP addressing for the cameras and NVR can occur on the same subnet as the rest of my network such that I am then able to access those cameras via a stream on my network and beyond? any confirmation greatly appreciated. It's a shame in a sense that the onboard PoE will be defunct and in effect the PoE port capacity really serves as an indication of throughput i.e. the more native PoE the higher the throughput - however I digress!. Great videos by the way. You guys are good. - liked and subscribed :)
Thanks for the nice feedback , the virtual LAN for the on board POE is indeed separate and not connected to the LAN , do you want to take RTSP streams for each camera as you can still do this via the LAN connection of the NVR
Great info. Does the camera need to be connected to a hikvison NVR or can then just be connected to the network for this SRTP workflow to work? For instance I have a 2MP Cube camera I would like to embed into a webpage.
Can be standalone and pull stream direct from camera that will be fine
@@DVSLTD yes I tried it and that works. Thank you for posting that info.
@@CR3DT That's good to hear :)
@@DVSLTD Hi I am also trying to stream camera directly on web page without use of NVR. How to do that? Thanks in advance for your help.
Hi! I need support to turn on RTSP on my Hikvision doorbell camera. How can I connect to you?
So far, so good, but you didn't show the resolution of that rtsp streaming (in vlc... Information... coding)
Some dvr can only stream 720p.
I am intersted to know if there are dvr with 1080p resolution for rtsp streaming.
Thanks of tone very use full tutorial
Thank you
Thanks, you saved my day
Still can’t get it to work, I’m sure there’s another setting on the nvr that is not shown in the video?
A question: if i add this live stream to my real website and then disconnect my pc, will i still be able to visit the website and watch that live stream ? Or pc and vlc must be open all the time?
It depends on how this is done, if you do it VLC via the PC then yes that needs to be running but most will port forward the camera so its open on the router , and pull the RTSP direct from the camera to the web service
Thanks for this very helpful video - I now have my stream embedded in my website but only one person can veiw at a time - is there a way to enable multiple views?
from the website can that not do it ??? I would have to look into it otherwise
Hii Dave, is the HIKVision model DS-2DE442IW-DE can stream to vlc too? cause till now I cannot stream the camera to VLC player. I have follow your instruction but is not working for me. Is any others suggestion for me?
Thank you
I have a Hikvision camera connected to OBS. It is displaying the date and time stamp on the output.
The address we have in OBS is the IP and port but we haven’t got “streaming” etc
How can we remove the date and time stamp?
Hello David, Maybe next time you could introduce how to use rtmp protocol send the video& audio stream to youtube or facebook with Hikvision camera
Hi and yes sure once we have that setup correctly I will advise 😊
How can I get the max and min temperature values read with programming any language by the thermal camera. Is there any API (or something else) available for this
there is but you will need to sign up online to get the info needed for integration - tpp.hikvision.com/
Hi Thankyou for the video, quick question, we have the 7600 Series NVR but I can not find integration protocol, it's just not showing? any ideas?
Hi Will, thanks, is it on the latest firmware?,
hi, do you know how to get the feed from particular given time interval using rtsp link, I am using the exact software to access the camera as you are using, thanks
not time based sorry , I will look at it , if I find this I will update
IT works fine...what about samsung SNO-5080R would you make a demo for that please i want to connect this camera via RTSP .
sorry we don’t sell or support Samsung products ☹
Very informative ... Thanks
Hey! I tried it with different options but it's not showing anything on vlc and when I tried with http on web browsers it shows that site cannot be connect. What the problem could be?
hi there! thanks for the video. ... Why in vlc a 1080p camera shows shrinked like 1080x1920 (1080 width). I shall rotate the cameras for optimal view?? 16:9'ish?
Hello ! Thanks really helpfull, I have an issue, it works just when I am connected on local connection, and when I try with other connection it doesn't works, any ideas ?
if the IP address used is internal it Can only be used internally , for external use the external IP needs to be used and port forward used
Thanks for the help! I got this setup with your help. I can view 3 cams, main or sub streams just fine but when i view channel 0, the resolution is rubbish. Any way to change that?
Hello, not sure if this was asked but Im trying to view the stream in home assistant, It works fine on Iphone but when I try to view it on browser with HA it doesnt work. I have to change encoding to 264 for it to work. Is there a way to make it work with 265 ?
I have never used that software myself so I can’t pass comment , I will download it and have a go and see what I can find
@@DVSLTD that would be great, thnx
did this way allow to can stream over youtube ?
Hi, thank you for this video. I have a question, do you know if the 'Integration Protocol' (where you enable Hikvision CGI) is available for all cameras?
Hi , its on latest hardware and firmware for sure , older units would not support this 😊
@@DVSLTD I have an older one and can't upgrade the firmware right now. Tell me please what should I do to connect by vlc player?
Can we see 4 cameras directly in vlc via streaming NVR ip through rtsp ?
If you use Ch0 and that enabled yes but low quality
That's great. Thank you
HI , is it possible to add ip camera to zoom ???
You can share the screen on zoom and make the IP camera web page full screen that is what I do
how if different network..cctv on ip public address..
will it still working? can you show the code..thx
Hi is this just for IP cameras and nvr or will this work with standard dvr with analogue cameras using onvif protocol
This is compatible with IP camera, NVR & DVR
So compatible with dvr and analogue
@@owlsy1971 Yes correct DVR , NVR , IPC
There are a script for HikVision VSPlayer to make a mosaic like in VLC? Many THKS
Not currently no sorry
on my tablet the connection drops after 20 sek, what can be the problem, its with a provision cam
Hi , sorry we only sell HIKvision , have you contacted provision ?
What is the security impact to turning off the encryption?
Hi there. I have a following model DS-7216HUHI-K2. I have enabled 3 analog cameras and 3 IP cameras connect to the system. How can i differant the RTSP command for the 3 analog cameras and 3 IP cameras to view through RTSP?
Hi , if you email webinar@dvs.co.uk I will send you the guide for the RTSP streams
@DVSLTD Thanks for the tutorial, I've got this working but only on the sub stream, am i doing something wrong? When using 101 i get no image.
is it only for IP camera? or both IP and analog camera?
Both IP , NVR & DVR 😊
I am use a hikvision DS-2CD4A26FWD-IZ/P with ip remote, because it's not in my same lan network. When I open the address from my browser explorer, I can see image without problems, but when connecting it to my application c #: NVRCsharpDemo, it does not allow me to connect. I need help with this, please, I am a rookie programmer.
Hi , sorry that’s not my expertise either, we use ISAPI for the commands, can you use that?
For me the stream loads, but it doesn't display the footage, does it have anything to do with the encryption key provided on HIK Connect?
Yes , turn off hik-connect to try it , if it works then it will be the encryption key ,
@@DVSLTD I want HIK connect too though :/
@@TrueRaps You can use HIK-Connect , just turn off stream encryption under network , platform and stream encryption on the local Menu
@@DVSLTD Wow thanks Dave! Though I have to admit, I was configuring a new iDS DVR with the webUI just to find out that some functions are only on the local ui ahah (also the BNC output did not work until the wizard on the local ui was closed 🙄, drove me nuts troubleshooting). Would it be possible to have Hik include everything in the webui in the future? (thinking of others that will have the same issues). Good day!
@@gianluca2075 Hey , yes I get you and there always adding to it , I will feed this back 😊
I see this working in your demo and it's great! What do you do differently if your Camera is connected to the NVR and pulling it's IP from the NVR?
Then you would type this into VLC for instance which worked for me - rtsp://admin:your PW@NVR IP address:554/Streaming/channels/101 assuming 554 in the RTSP port of the NVR
Just dont seem to be able to get this to work VLC player reports 'VLC is unable to open the MRL'
could you please help me, I can´t enable RTSP on this DVR Hikvision model 7204hqhi-k1 it just Don´t have the options like in the video also all times I have tried to Streaming it with VLC trows me that i can´t Open regards!
Are you using H.265+ if so use standard H.265 , can you send me the stream you are trying to use please ?
Hi, Is that protocol support for DVR DS-7332HGHI-SH? if yes, pls show me how. and i need to send the photo of line crossing to send out to Telegram through this protocol. thank for your help.
Hi, we support RTSP across most of the products , regards line crossing can you not use email as it will attach 3 images then , the RTSP protocol is the same as the video , there is a document I can send if you like?
hi can you tell me how to live streaming in http? Instead of snapshots i want the live streaming of my camera in my web browser.
How do we find the stream information? is the above the same for every device?
It’s the same stream for HIK Devices yes , I have the PDF if you need it
@@DVSLTD Yes please, can you email it to my sirus email please
@@r6stu Sirus email?
@@DVSLTD Yea s. Keith at sirus - telecom dot Co dot UK (without spaces)
Pode ser utilizado junto com o obs Studio para fazer transmissões ao vivo, há também serviços de gravação em nuvem que fazem uso deste recurso para se conectar às câmeras ou aos canais dos DVR
Hello thank you for the vidéo, i have a question how can embed this rtsp inside my website html pages ?
Hi! I have tried http streaming, is working but only 1 user can see the cam, next user will see error msg until first user close the browser. any solutions? Thank you!
what happens when you have a double digit number of streams? ie main stream of camera 10?
Hi , I am using Hikvision U1 Network Mini Cube Camera , How I can create and Using RTSM Stream Live. Thanks
Can the RTSP stream be used with DDNS address? Would the address be substituted for IP address in the same format? I want to stream from a remote location where I am unable to get a static IP from a mobile SIM router.
In theory yes , you would use same stream but substiture the IP address with DDNS , we have had it working before along time ago , so only presume its still ok
Just tried it again and it doesn’t work , I will keep checking
@@DVSLTD Thanks for trying and thanks for all the continuing great tips. Very informative channel.
@DVSLTD I am also trying to stream directly from HikVision IP camera on website without using any NVR. I tried every thing but could not get success. Can you please help me here.
I have camerais running on POE switch without any NVR. it is accessible through HikVision app but not accessible directly on webpages.
Hello, is it possible to get RTSP stream from Hikvision DS-KV8402-IM outdoor villa station camera? Thanks!
Use this , rtsp://192.168.3.217:554/ch01/main/av_stream but will add to HIK NVR ok
http Streaming channels not working . its say "Access Error: 404 -- Not Found" . how can give access to http channel. rtsp working fine i getting problem on httppreview
Did you try changing the stream compression to mjpeg?
How can I capture Both the Audio and Video Stream from my HIKVision Camera?
Hi Guys!
thanks for this video! Is it also possible to stream video + audio?
Greetings,
Boy
Hey , yes the audio if present should work via that stream ,
Hi, is there any other way to pass authentication? Because the method you mentioned is forbidden. Thank you for your help.
you cant put the username / password into the stream ??
@@DVSLTD yes, it gives an error: "Subresource requests whose URLs contain embedded credentials (e.g. `user:pass@host/`) are blocked."
I need stream from VGA or HDMI port to my pc
Thank you for this useful tutorial. I can get everything to work apart from the http-with-embedded-login URL. Mine is the same structure as yours but I still get asked to log in [by Safari on MacOs].
Fixed now - your illustration is correct, my fingers are fat.
Thank you. I purchased a decoder and Hik was no help in getting it configured.
i tried to open through http its not opening but im able to open through rtsp in vlc ? any idea??
is the port for HTTP still set to 80? If changed you need to use the :81 for instance or whatever port is being used, also can you use HTTPS ?, if so login and check that http has not been disabled inside the configuration menu of the device and network 😊
Hi, Great video.When using VLC player, I can get the stream with no user name and password but can not get it to work when embedding those details. I know I have the log in details correct but it will just not work..... Any thoughts ?Cheers Dave
Hi Dave and thanks , are you using special characters like ? ! , I have had some issues before with that , if not I will take another look
@@DVSLTD Thanks for coming back to me so quickly. We have a # in the password so maybe thats it...I will give that a go. My NVR is a DS-7308HUHI-K4, I don't seem to have the same Intergration Protocol settings as shown in you video and wondered if this was a problem as well. I only have the ONVIF enable and no Hikvision CGI settings.....
@@DiggerDave1968 That’s ok , yes try the password without the # and see if this improves it , you will also need to disable the verification code in HIK-Connect if enabled as that stops this working. Also on the web interface of the DVR under security set RTSP Authentication to digest/basic , and under network and advanced , network service , make sure RTSP is enabled , and use H.265 not H.265+ 😊
Username from Url is used but correct password is ignored
Hi there. First of all many thanks for the great video!!
But...
I am using this URL:
rtsp://Username:Password@IP-Adress:Port/ch1/main/av_stream
in VLC.
When hitting "Play", a "RTSP Legimit" window pops up. In the window the Username is already there, but password keeps blank. Entering the password in that upcoming window allows opening the stream.
I double / tripple checked the users password in that URL is correct.
So from the above URL username is taken over, but Password not. What is wrong (with me :-) )
I have tried it on Windows 10 and iPad Pro, both run most current VLS Player
Can you please help
Hi peter, the stream to use username and password would look like this , please make sure the “encryption stream “ is off if using HIK-Connect also
rtsp://Hikvision:guest@173.200.91.70:10554/Streaming/channels/1701 - get the main stream of the 17th channel
(1st IP camera on the Hybrid Demo)
rtsp://Hikvision:guest@173.200.91.70:10554/Streaming/channels/1902 - get the sub stream of the 19th channel
(3rd IP camera on the Hybrid Demo
Isn't it a colon : not a semi-colon ;
Thanks for guide. I need to stream all camera with a single url. I would like to see all camera (vidiwall) with vlc. Is it possible?
Not in one stream to show all cameras sorry
@@DVSLTD is there another possibility to view all cam with one stream?
@@mjair2009 I assume you want to see all cameras on a NVR using just 1 RTSP stream?
@@DVSLTD yes. I need this. Help me. ;-)
@@mjair2009 We can use this on some devices, please make sure on latest firmware the RTSP function is enabled on the web interface and channel zero is supported and setup
rtsp://IP:port/ch00/main/av_stream
hikvision default password contents @ symbol how to specify in such case
Do you want the RTSP document
how about channel zero?
Try this rtsp://IP:port/ch00/main/av_stream
@@DVSLTD i managed to use isapi in the link and worked like charm!
hey hello good day, i have a question i have DS-KIS602
hinkvision and i would like to see on the screen my other ip camers about rstp. is this possible and if so how I hope you can help me and mischie can make a video of it.
thanks.
you can do this. are they HIK cameras ? not tested no hik models but under device you can add device and select DVR / NVR , and then IP of that device , then channel number
it be ubiquiti cameras, and i have an rstp link from each camera but i don't think i can fill in this link if possible, can you show me how this works?
@@Kevin-Laser-Specialist I will try to do an update on that for you
Hi friend
it's possible stream the audio?
I would like to connect an audio mixer to my DVR and stream audio and video..
thanks
Hi, let me check
Hi , do you want the audio separate or just included with the video??
@@DVSLTD included..but it is indifferent
@@saidaoussar2216 Not sure I can separate the audio file specifically , I will check
@@DVSLTD
I managed to make an audio video stream with vlc and it works .. I'll try to stream on youtube / fb live with the OBS program
Hi guys, wondering if you can help me. We actually just opened an account with you recently lol. Came across this tutorial but keep getting stuck when it comes to getting the video interfaces into my website without using a third party to restream it. I've the rtsp stream working and I've also a sub stream set to mjpeg. I'm having issues I think as I can not use without authentication. This I believe is only using one person to view due to the user details being entered and also this needs to be copied and pasted into my browser and not embedded into my webpage. Then again I'm running wordpress and there is and addon for embedding a web cam which in essence this is and it says ti enter my link. If gives an example without authentication. Suppose fist question is how to remove the need for authentication as this is stumping me or is there an easy way to integrate into my site and I'm missing it. Thanks in advance guys!
hello how to using web rtsp with android studio ?
Hi bro I have question while viewing DVR or NVR from IE browser live view failed coming what is solution for that.... waiting for ur response
Hi Bro,
This normally is when the web components fail , please try going to control panel and uninstall , then uninstall the web components, then open IE and go to settings and clear the browser cache , close and re-open , browse to the IP address of the DVR/NVR and reinstall the web components , close and re-open the IE and this should work , if still doesn’t work it could be port 554 ( or whatever has been used) is blocked / not forwarded , or if using old IE like IE 9 , then in IE options run it in compatibility mode, this should help
Do you know how to get the third stream rtsp?
You can get it from the camera direct only using 103 as the channel number 😊
@@DVSLTD I have tried to my wits end to get the third stream rtsp using channel 103 on DS-2DE4A220IW-DE, but I still cant access it. Do you have any other suggestions? Thanks so much for your reply.
The VLC must it be on a PC in same LAN with the camera?
Yes, unless you use a static external IP or Dynamic DNS with port forwarding set up in the router
I want to stream live video of camera to the web page.. will you please help.
I need the answer too
I am getting only one camera stream out of 4 cameras i am connecting from other network i have a public ip abd i put correct chanel nber and ip address
if you use 101 it will get just camera 1 stream, 201 camera 2 etc , have you tried this ?
@@DVSLTD yes i have checked but later i got every thing ok by some changes in dvr ip and port forwarding in router
How do you access the third stream in Hikvision cameras?
Hi, this depends on the model used, it’s mainly used for 3rd party integration , some models you have login to the camera and enable the 3rd Stream , is this enabled?
@@DVSLTD Yes, it is enabled in the camera. Third party integration is the reason I want to use it. I do have the cameras connected to a Hikvision NVR and I have virtual host turned on, but I can't find a way to get the RTSP feed from the third stream. Thanks in advance.
Are you taking the stream via the IPC direct ? or you want to pull it via the NVR as its connected to the POE ports direct?
DVSLTD I’d like to know how to do both. Thank you for your help.
@@eddytrochez You can do it via the IPC direct , as far as I remember not via the NVR but I will test
I am going to make a million dollars some day once I am able to interpret these directions for novices like myself for whom most of this is too fast, too obscure, too geeky.
Keep with it , we will help you earn that million dollars