How to Replace Fuel Injectors 2011-2021 Jeep Grand Cherokee 3.6L V6
HTML-код
- Опубликовано: 30 сен 2024
- Buy Now!
New Fuel Injector from 1AAuto.com 1aau.to/ie/1AFI...
This video shows you how to install new fuel injectors in your 2011-2021 Jeep Grand Cherokee 3.6L V6. Fuel injectors are computer controlled spray nozzles that deliver fuel to your engine in precisely controlled volumes. They are one of the keys to modern efficient and clean engines. If a fuel injector is dirty or failing, it can present symptoms such as rough idle, engine surges, rich or lean conditions, and check engine lights. Replacing a problematic fuel injector with an engineered to fit TRQ replacement part right away is essential to the health of your vehicle’s engine.
Estimated installation time for a professional technician is approximately: 2 hours 0 minutes
This repair was done on a 2012 Jeep Grand Cherokee Laredo 3.6L Sport Utility 4-Door AWD Automatic and the process should be similar on the following vehicles:
2011 Jeep Grand Cherokee
2012 Jeep Grand Cherokee
2013 Jeep Grand Cherokee
2014 Jeep Grand Cherokee
2015 Jeep Grand Cherokee
2016 Jeep Grand Cherokee
2017 Jeep Grand Cherokee
2018 Jeep Grand Cherokee
2019 Jeep Grand Cherokee
2020 Jeep Grand Cherokee
2021 Jeep Grand Cherokee
Tools you will need:
• Flat Blade Screwdriver 1aau.to/obHe/1A...
• Pocket Screwdriver
• 10mm Wrench 1aau.to/oadu/1A...
• 13mm Wrench 1aau.to/oadu/1A...
• 10mm Socket 1aau.to/obH5/1A...
• 13mm Socket 1aau.to/ob82/1A...
• Air Blow Gun
• Trim Tool Set 1aau.to/oayi/1A...
• Hose Pliers
• Pliers
• 5/16 Inch Socket
• 5/8 Inch Socket 1aau.to/ocax/1A...
• T30 Bit
• Ratchet 1aau.to/ocax/1A...
• Socket Extensions 1aau.to/ob82/1A...
• Swivel
• Torque Wrench 1aau.to/obco/1A...
• Gloves 1aau.to/oa8a/1A...
• Paper Towels 1aau.to/oPs/1AX...
• Safety Glasses
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
What is the solvent you used to spray the injectors?
And flat rate is 2 hours on this . Hahah what a joke .
Third time: what solvent?
I wonder how many people who’ve referenced this video have snapped their intake bolts by applying 89 lb-ft of torque? 😂it says right on top of the intake 7-9 Nm. That converts to like 5-6 ft-lbs.
Work clean 🧼
What spray solvent?
Excellent video... I save this for my archives. Thanks so much.
Thanks guy. Got a Promaster and this answered questions.
Amazing work thank you so much