Helix Permanent Jewelry Welder - bit.ly/Helix-Permanent-Jewelry-Welder Helix Permanent Jewelry Welder (Amazon) -amzn.to/3vAT8Sc Argon & Regulator Kit - bit.ly/Argon-And-Regulator-Kit Argon Tank Only - bit.ly/Pre-Filled-Small-Argon-Tank Regulator Kit Only - bit.ly/Argon-Gas-Regulator Helpful Jewelry Tools That I Make: Center Finder & Symmetry Checker - bit.ly/Center-Finder-And-Symmetry-Checker Drawing Design Templates - bit.ly/GomeowCreations-Design-Templates xTool F1 Portable Metal Laser Engraver - bit.ly/xTool-F1-Laser-Engraver xTool Portable Power Pack (Expansive) - bit.ly/xTool-Power-Pack Jackery Portable Power Pack (Same as the xTool one but cheaper) - amzn.to/47yiJbJ Portable Power Pack That I have (It is a bit cheaper but all holds less power) - amzn.to/48zvbt0 Materials To Make Permanent Jewelry: Permanent Jewelry Materials (From PepeTools) - bit.ly/Permanent-Jewelry-Materials Permanent Jewelry Materials (From Amazon) - amzn.to/4aO1gii Other Tools Used In The Video: 2 lbs brass hammer - amzn.to/3HfpnsO CircleDiscCutter - bit.ly/CircleDiscCutter Cutting Lubricant - bit.ly/BladeButter NANO Jeweler's Saw Blades - bit.ly/NANOSawBlades Haymaker SawFrame - bit.ly/HaymakerSawFrame Simple Jeweler's Saw Frame - amzn.to/41ZHInl ________________________________________________ If you are looking for more tools and materials that I use, well you're in luck! I made a page on my website just for that. GomeowCreations.com/tools-and-materials GomeowCreations.com/partners-discount-codes Note: Most of the links that I use that go to products are affiliate link. This means I make a small commission on anything that you happen buy using them. This is at no extra charge to you and this helps support the work I do on this channel. 😁👍 ________________________________________________ Other Ways To Help Support The Channel: My PATREON ➜ patreon.com/GomeowCreations One time support ➜ paypal.me/gomeowcreations ________________________________________________ Instagram ➜ instagram.com/gomeowcreations/ Facebook ➜ facebook.com/GomeowCreations/ ________________________________________________ Using Lightning to Make Jewelry 😁 #permanentjewelry #microwelder #jewellerymaking #jewelrymaking #diy #gomeowcreations
Awesome video!! Packed with info and very thorough, I don't feel intimidated by this tool anymore 😀 And I think it's a great piece of gear for anyone interested in starting a permanent jewellery business
Ha! We just bought a similar setup. Pulse arc welder & portable fiber laser (similar to the IR diode) Wish i saw this earlier, and i watch your channel all the time. Great stuff. Still - it confirms we made a great investment.
Yeah it really is a nice setup and it's going to come in very handy for sure. That being said it's not cheap so I can see having to save up a bit to get it. 😁
I am a trumpet maker and I use clamps to hold parts in place for soft soldering or brazing. I’d love to be able to sometimes tack things in place before soldering or brazing. How big can I go with the parts using this unit?
Hi can you please suggest a laser welder who does micro-laser-welding? Do you do repairs? I have a very small piece of, item that needs very tiny repair, when you google for laser welder almost everything it spits out is " laser welding machines". Anyway someone who specializes in tiny laser welds/repairs like yourself is probably what im looking for but no luck so far. Material involved is brass with nickle finish. Any heads up cheerfully accepted.
Haha yeah I talk a little fast and it is very funny to slow it down because it does make me sound very drunk. I see it as a win win, you get helpful info and a laugh 😁
That’s funny cuz I never listen to any YT vid at normal speed. It’s usually 1.25X. I slowed to normal based on your comment and he does sound a little slurry. 😅
@@GomeowCreations of course but not that much, if I understand right this is a spot welder with an argon feed, the bill of materials should not be over $50 and there's little to no electronic novelty in it (battery powered spot welders can be found for ~$30 online) this thing is pretty but unless I miss something big there's no justification for such a high cost
First thing I noticed at the start of this video. There a PRADA sponsor ad at the top of the video.. WOW. Big name for a channel who's first videos included making rings from copper wire with a pair of pliers and a torch...
@@GomeowCreations Is it though.... Ths guy PRADA, he makes his money by selling the stuff that he makes in his wee garage does he? Or does he make his money by selling other people's hard graft and design?
I just bought a Zapp Plus and I have the F1 (which I’ve had for almost a year and not used yet 🫣). I hadn’t thought of combining the laser custom engraver for permanent jewelry. I also do hand stamping and have lots of fonts. Oh the options!
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
Helix Permanent Jewelry Welder - bit.ly/Helix-Permanent-Jewelry-Welder
Helix Permanent Jewelry Welder (Amazon) -amzn.to/3vAT8Sc
Argon & Regulator Kit - bit.ly/Argon-And-Regulator-Kit
Argon Tank Only - bit.ly/Pre-Filled-Small-Argon-Tank
Regulator Kit Only - bit.ly/Argon-Gas-Regulator
Helpful Jewelry Tools That I Make:
Center Finder & Symmetry Checker - bit.ly/Center-Finder-And-Symmetry-Checker
Drawing Design Templates - bit.ly/GomeowCreations-Design-Templates
xTool F1 Portable Metal Laser Engraver - bit.ly/xTool-F1-Laser-Engraver
xTool Portable Power Pack (Expansive) - bit.ly/xTool-Power-Pack
Jackery Portable Power Pack (Same as the xTool one but cheaper) - amzn.to/47yiJbJ
Portable Power Pack That I have (It is a bit cheaper but all holds less power) - amzn.to/48zvbt0
Materials To Make Permanent Jewelry:
Permanent Jewelry Materials (From PepeTools) - bit.ly/Permanent-Jewelry-Materials
Permanent Jewelry Materials (From Amazon) - amzn.to/4aO1gii
Other Tools Used In The Video:
2 lbs brass hammer - amzn.to/3HfpnsO
CircleDiscCutter - bit.ly/CircleDiscCutter
Cutting Lubricant - bit.ly/BladeButter
NANO Jeweler's Saw Blades - bit.ly/NANOSawBlades
Haymaker SawFrame - bit.ly/HaymakerSawFrame
Simple Jeweler's Saw Frame - amzn.to/41ZHInl
________________________________________________
If you are looking for more tools and materials that I use, well you're in luck! I made a page on my website just for that.
GomeowCreations.com/tools-and-materials
GomeowCreations.com/partners-discount-codes
Note: Most of the links that I use that go to products are affiliate link. This means I make a small commission on anything that you happen buy using them. This is at no extra charge to you and this helps support the work I do on this channel. 😁👍
________________________________________________
Other Ways To Help Support The Channel:
My PATREON ➜ patreon.com/GomeowCreations
One time support ➜ paypal.me/gomeowcreations
________________________________________________
Instagram ➜ instagram.com/gomeowcreations/
Facebook ➜ facebook.com/GomeowCreations/
________________________________________________
Using Lightning to Make Jewelry 😁
#permanentjewelry #microwelder #jewellerymaking #jewelrymaking #diy #gomeowcreations
Awesome video!! Packed with info and very thorough, I don't feel intimidated by this tool anymore 😀 And I think it's a great piece of gear for anyone interested in starting a permanent jewellery business
Thanks and yeah it would be perfect for a permanent jewelry business
What is the thickest material it can reliably weld so that connection remains strong? How deep does it penetrate?
Nice product, great vid as usual! To the point, no time wasted.. just packed with clear instruction and illustration.. 👍👍👍
Thanks and I really do try to keep my videos to the point as much as I can. I really don't like to waste peoples time 😁
Great video. Cool welder. Content to the point. Thanks again Randy.❤
😊
Hello 👋 Friend What A Beautiful Video 📷 Watching 👀 Excellent Sharing Good Work 👏👏 Keep It Up Friend 👍 I Hope To See You Around 👋👋👋👋👋
😁
Ha! We just bought a similar setup. Pulse arc welder & portable fiber laser (similar to the IR diode)
Wish i saw this earlier, and i watch your channel all the time. Great stuff.
Still - it confirms we made a great investment.
Pretty cool little spot welder, I’m thinkin hit the ends of coworkers pliers to tac them together, cause a little confusion lmao
That would be funny
Awesome set up. Would love to have those. Have to save a bit first but so worth having.
Yeah it really is a nice setup and it's going to come in very handy for sure. That being said it's not cheap so I can see having to save up a bit to get it. 😁
Does it work with all metals (gold, silver, brass) and all gauges? Thanks for video
Thank you for the great introduction.
😁
Why we need Argon Gas? What the differences between with Argon Gas & without please?
Are these arc welders only good for tiny things like jump rings or can they be used instead of soldering for 2mm wide stacking rings for example?
You can weld thicker stuff together like that but you just have to do a few weld points
I am a trumpet maker and I use clamps to hold parts in place for soft soldering or brazing. I’d love to be able to sometimes tack things in place before soldering or brazing. How big can I go with the parts using this unit?
Ye welding machine se Alluminium pdc welding kar sakte hai kya
Best video on these welders! What gauge jump ring did you use in the beginning?
Thanks and I believe it was 22g
Where did you get that pair of grounded pliers that hold your work without having to hold it tight?
Their cross lock tweezers they should have them on the pepe tools website
Great review and tips. Thank you!
😁👍
Daring to dream! Thanks for this video!
😊
Have you used this for fusing fine silver?
I haven't but it should work without any problems
Can you resize rings with this welder?
Hi can you please suggest a laser welder who does micro-laser-welding? Do you do repairs? I have a very small piece of, item that needs very tiny repair, when you google for laser welder almost everything it spits out is " laser welding machines". Anyway someone who specializes in tiny laser welds/repairs like yourself is probably what im looking for but no luck so far. Material involved is brass with nickle finish. Any heads up cheerfully accepted.
Is that scratch brush the fiberglass brush we have for enameling?
It should be the same one
Talking speed was a little quick for me so I tried slowing it down and you sound so drunk, its hilarious!
Haha yeah I talk a little fast and it is very funny to slow it down because it does make me sound very drunk. I see it as a win win, you get helpful info and a laugh 😁
Well now I have to listen to it like that hahaha 😂
😂 I concur!
75% sounds like you just got some dental work!😂
That’s funny cuz I never listen to any YT vid at normal speed. It’s usually 1.25X. I slowed to normal based on your comment and he does sound a little slurry. 😅
This looks amazing! If only it was more affordable 😢
Yeah it definitely has a high barrier to entry when it comes to the price point 😅
Great video!!❤
Thanks 😊
Interesting approach to simple jewelry making. Soldered joints are, unfortunately, ugly. Wondering if filling/polishing would clean things up.
Very good video.
Thanks 😁👍
Nifty gadgets!
Very much so
Fantastic
$1300 for a capacitor hooked to a solenoid is a bit harsh tbh
You're really oversimplifying the whole thing lol
@@GomeowCreations of course but not that much, if I understand right this is a spot welder with an argon feed, the bill of materials should not be over $50 and there's little to no electronic novelty in it (battery powered spot welders can be found for ~$30 online) this thing is pretty but unless I miss something big there's no justification for such a high cost
About £200 on aliexpress
@@THusbands pretty sure I've seen a functional one for ~$25 in a @greatscott video
Nah man its just a tig welder but small and somehow it costs about 4 times as much as a tig welder@@GomeowCreations
First thing I noticed at the start of this video. There a PRADA sponsor ad at the top of the video.. WOW. Big name for a channel who's first videos included making rings from copper wire with a pair of pliers and a torch...
Really? They are advertising on my channel?
@@GomeowCreations Yup!!!
Well that's interesting to hear for sure 😁
@@GomeowCreations Is it though.... Ths guy PRADA, he makes his money by selling the stuff that he makes in his wee garage does he? Or does he make his money by selling other people's hard graft and design?
❤
😊
Not interested in ads
Same 😅
Did you breath in the whole video? 😉
Yes lots of times seeing that doing the voice over for this took a few days 😅
I just bought a Zapp Plus and I have the F1 (which I’ve had for almost a year and not used yet 🫣). I hadn’t thought of combining the laser custom engraver for permanent jewelry. I also do hand stamping and have lots of fonts. Oh the options!
Great video. Stop saying “and” so much!
Thanks and no
Agree! Love your reviews but you talk really fast.
Thanks and yeah I do but you can slow the video down a little and it should help and it also makes me sound a little drunk so you also get a laugh
$1399 LOL
Yeah not a cheap tool
Just wish Americans didn’t feel the need to talk so bloody quickly
LMFAO 1400 euors ????