@TRBJBL - Brandon Cho Productions stripper clip is a little, well clip that holds rounds to be loaded into the gun and requires the shooter to manually operate the action to chamber the ammo but a magazine has a spring that feeds the ammo into the chamber
How to do this properly: Place darts on ground. (Or leave them there coz you just fired them.) Turn magazine upside down. Press magazine opening fown on first dart. Dart will slip into the mouth of the magazine. Repeat quickly with all darts or until mag is full. No dart damage, no 3d printing, no time wasting, no stupid stuff. Simple. Got the idea from a tennis ball collecter. (Large pvc pipe with a nail in the end to stop balls falling out again. Just press pipe fown on tennis ball. Same concept)
Nice to see other people using and improving these with 3D printed versions. They do damage the darts more than traditional loading methods however I tend to find that you can reuse darts more than a few times anyway, at least not in relatively competitive games, as they just don't fly or perform as well. A lot of people can't see the point, as you have to load the stripper clip before loading the mag anyway, but the fact that you can fill a few of these up pre-game (possibly even a few days/weeks/months before since the clips don't deform the darts or have springs to damaged in prolonged storage as mags do) and rapidly reload a mag mid-game/between games make them extremely useful in my eyes. For the original I just used an old ice-cream container. Video: ruclips.net/video/e2vHHz2QDug/видео.html&lc Full post: www.tapatalk.com/groups/britnerf/n-strike-stripper-clip-t905.html
The way I would use the speed loader is to put the first two darts of the speed loader in and then push the darts sliding them into the magazine without pushing out the whole speedloader in
This is a great idea! I think others are unable to grasp its usability. It is quicker to load one of these and then a magazine than to just load a magazine. Also with a few more improvements it could be even faster. Maybe add some serrations to the top to easily be able to pull it out by pinching the part the sticks out of the mag.
I get that this speed loader damages darts, but it allows you to reload magazines a lot faster; that's the tradeoff. I've destroyed more darts with LPA and flywheel blasters than using speed loaders. Even if the overall time of loading speed loaders and magazines is the same as just loading a magazine directly, it's still a lot faster to reload magazines during a war because you would have speed loaders ready to go. When you're picking up darts, put them in a speed loader.
Literally, just carry extra mags. They are super cheap, get a plate carrier or a vest, stuff like 4-6 mags (double stacked) and boom. You dont need to use this lol. Just a waste of time.
Sebastiaan Kant well yeah but if you have like 10 preloaded speed loader then speed load a mag you use in combat then you don't have to spend a lot of time doing that
@@LogLab do you think that tou would save any money,just trying to "speedload" it once will moderately damage your darts and the speedloader might break too,because it's 3d printed and it would cost much more money,on qmazon you can get 3-4 12 round mags for 12 bucks
Agreed, but darts are like 5¢ more or less and I've only broken maybe 2 darts in my pool of 20 darts (I only used the speed loaders with 20 of the same darts). I'm not sure how many times I've loaded a mag with a speed loader, but it's enough times for me to stop keeping track, so it's worth using it imo.
I don't like the bending of the darts, or the magazine retainer...maybe modify the magazine to have a hinged latchable top, or spring loaded top...might be worth looking into.
MiLeung - Prints i agree but at least flywheels serve a purpose, one hand blaster opperation and much quicker fire rate. This thing just squishes darts in a magazine ant take 2ble the time.
I loaded 4 1/2 35 round drums in the time it took u to finish the vid, but I’m gonna toss that one to experience, cuz I’ve been doin that for something around 6 years
At this point just make 3d nerf mags, it is a tool you dont need, the only advantage it not sliding in darts, only dropping, and even then it is nearly usless, with the same profile as a mag
why do you need a speedloader for nerf? Doesn't it take just the same if not more time to do this? Why not just put the darts in the magazine? Seems like a waste to even use this? You have to load that, one dart or 2 at a time, then stuff it in. I feel like its easier just to load the magazine?
Brodie Gardiner yes. By the time you have loaded the speed loader you could of had them in the actual mag and they might not even work in springers but #flywheelmasterrace.
Sure, if you take into account printing time. The only work I have to do is press a few buttons and let my 3D printer run while I'm busy doing something else.
That's what I had at the time. My friend has thousands of accufakes for nerf wars, so I didn't see the need to buy more darts cuz I can just steal them from him.
Another name for this video: How to Damage Your Darts
MTF Epsilon 11 don’t worry streamlines don’t matter
MTF Epsilon 11 shuck
MTF Epsilon 11 and your clip
MTF Epsilon 11 it's still a speedloader tho
MTF Epsilon 11 yes i think so too
Or just load a spare mag
MainFly Mai i know right so simple
MainFly Mai thank you for demonstrating your stupidity to everyone.
RooThaDude how is it stupid?
??
It is more heavy to carry these then darts
You could just print you own magazin, i mean the speedloader also take time to reload.
Bertil Billig i
Way to miss the point jackass.
Next thing you know he makes speed loaders for speed loaders 😂
@@sauryapatel4390 Lol don't copy bro.
Or you can just call this a stripper clip.......
Lumpen0 beat me to it
lol
Lumpen0 j
100 like 😛
@TRBJBL - Brandon Cho Productions stripper clip is a little, well clip that holds rounds to be loaded into the gun and requires the shooter to manually operate the action to chamber the ammo but a magazine has a spring that feeds the ammo into the chamber
How to do this properly: Place darts on ground. (Or leave them there coz you just fired them.) Turn magazine upside down. Press magazine opening fown on first dart. Dart will slip into the mouth of the magazine. Repeat quickly with all darts or until mag is full. No dart damage, no 3d printing, no time wasting, no stupid stuff. Simple. Got the idea from a tennis ball collecter. (Large pvc pipe with a nail in the end to stop balls falling out again. Just press pipe fown on tennis ball. Same concept)
No dart damage my left nut. And what about debris hmm?
dont do it on debris?? the dart in on the ground not in a swamp
War_Machiine are you sure it would work with darts? Definitely would work with rival rounds but idk bout darts
You could make it lighter and made of hard card so its disposable meaning you can carry a load of these and not care if they get destroyed :D
That would probably make it easier to get into the clip too cause it can flex more
Lol the demo takes like twice as long as it takes me to just load a 12
Lego Boss he is showcasing it holy shit how many kids can possibly miss the point
Can be a lot better considering the fact that will bend and crease your darts
How about dis.....a speedloader...........for your.......SPEEDLOADER!...IM A GENIUS!😁
But what loads the speed loader for your speed loader
So you load a speed loader with a speed loader and you load that one with another one and it goes on infinitely
that is how you break your darts
kokolegends i guess you dont use modded fly wheel blasters?
Yep I now use nerf guns that are modded to use bbs.
I dont use $40 blasters
kokolegends bad for you
I am not rich boy
Nice to see other people using and improving these with 3D printed versions. They do damage the darts more than traditional loading methods however I tend to find that you can reuse darts more than a few times anyway, at least not in relatively competitive games, as they just don't fly or perform as well. A lot of people can't see the point, as you have to load the stripper clip before loading the mag anyway, but the fact that you can fill a few of these up pre-game (possibly even a few days/weeks/months before since the clips don't deform the darts or have springs to damaged in prolonged storage as mags do) and rapidly reload a mag mid-game/between games make them extremely useful in my eyes.
For the original I just used an old ice-cream container.
Video: ruclips.net/video/e2vHHz2QDug/видео.html&lc
Full post: www.tapatalk.com/groups/britnerf/n-strike-stripper-clip-t905.html
Try 3D printing a custom magazine with a hinging blackplate that opens up and latches closed.
Endothermic Madness not a clip
Otis Darlington, whoops, was thinking about the 3D printed one.
He's probably taking 5 secs longer than louding one hundred rounds in a nemmisis
FLYWHEEL MASTER RACE
The way I would use the speed loader is to put the first two darts of the speed loader in and then push the darts sliding them into the magazine without pushing out the whole speedloader in
So it’s a nerf strip clip
Yep
This is a great idea! I think others are unable to grasp its usability. It is quicker to load one of these and then a magazine than to just load a magazine. Also with a few more improvements it could be even faster. Maybe add some serrations to the top to easily be able to pull it out by pinching the part the sticks out of the mag.
Remeber the speed loader STILL NEEDS TO BE RELOAD and then you put it into a magazine your just reloading 2 magazines wasting time...
Think, internal mag blasters
You also could cut out an area out of the top of another mag fed and quick reload it
Long story short:
Cool, but not worth. Just load into an empty mag while you're running.
I get that this speed loader damages darts, but it allows you to reload magazines a lot faster; that's the tradeoff. I've destroyed more darts with LPA and flywheel blasters than using speed loaders.
Even if the overall time of loading speed loaders and magazines is the same as just loading a magazine directly, it's still a lot faster to reload magazines during a war because you would have speed loaders ready to go. When you're picking up darts, put them in a speed loader.
Buy knock off darts sometimes they are stronger than the original and most of them have harder tips
Literally, just carry extra mags. They are super cheap, get a plate carrier or a vest, stuff like 4-6 mags (double stacked) and boom. You dont need to use this lol. Just a waste of time.
Definetly "faster" than throwing in a fresh mag.The concept is good,but practically,it's slower and damages your darts quote a lot.
@@lordtachanka85 they're not suotable for flywheels and they're more dangerous,because they have xheap plastic tips instead of soft rubber ones.
@@BrayMusic317 do you have a plate carrier?
I would make it a little bit more roomy, and add a removable hopper for easier dart loading
It’s basically a magazine for your magazine
how to destroy your darts and your mags plus you fist need to put all the darts in the loader and then put them in the magazine genius
Sebastiaan Kant These are cheaper to get than buying a bunch of magazines.
Sebastiaan Kant. Point: Missed.
Sebastiaan Kant that's my point lol
Sebastiaan Kant well yeah but if you have like 10 preloaded speed loader then speed load a mag you use in combat then you don't have to spend a lot of time doing that
@@LogLab do you think that tou would save any money,just trying to "speedload" it once will moderately damage your darts and the speedloader might break too,because it's 3d printed and it would cost much more money,on qmazon you can get 3-4 12 round mags for 12 bucks
Best way to slow your reloading
Can you please send me 1 of those to test?
This is litterally slower than just loading the damn mag
Have ya heard of mag pouches with pre loaded mags
Great idea, pushing darts through the magazine lips is a bit cringy though
Agreed, but darts are like 5¢ more or less and I've only broken maybe 2 darts in my pool of 20 darts (I only used the speed loaders with 20 of the same darts). I'm not sure how many times I've loaded a mag with a speed loader, but it's enough times for me to stop keeping track, so it's worth using it imo.
MiLeung - Prints i cringed to and in the netherlands darts are freaking expensive. U have to pay like 1 dollar per dart. But you have a point
I don't like the bending of the darts, or the magazine retainer...maybe modify the magazine to have a hinged latchable top, or spring loaded top...might be worth looking into.
4:57 we need a speed loader for the speed loader
One fault, the speed louder also takes time to reload. Nice idea though
Coldninja 45 it is much quicker though, hence the name "speed loader" and not "load a Nerf gun In 0.0 seconds"
It's going to be faster if you just load your magazine normally
Want to hear a funny joke
Nerf Deploy
That's not a speed loader, that's a clip.
Not a magazine, that white 3D printed part is actually a clip.
why do we need a speed loader if we can just bring more mags, they are the same size
You deserve more than 86 subs great job
But you have to load the speed loader as well which is self defeating
It looks like when you are holding the darts you’re kinda fucking them up
When I watch these vids and scroll down the comments all these good nerf peps are saying stuff I never knew and I was like woah
How to destroy your poor darts
True, but if intact darts were a priority for people, they wouldn't use flywheel blasters
MiLeung - Prints i agree but at least flywheels serve a purpose, one hand blaster opperation and much quicker fire rate. This thing just squishes darts in a magazine ant take 2ble the time.
I loaded 4 1/2 35 round drums in the time it took u to finish the vid, but I’m gonna toss that one to experience, cuz I’ve been doin that for something around 6 years
3:50 is the current version
It would take longer
That would just break the darts
Rodger Rodger, you sound like a droid off of star wars. please don't think I'm bullying you though.
Easier: stick speed loader on top of nerf gun with mag
And the push down
Tell me why it just looks like a hard piece of paper
At this point just make 3d nerf mags, it is a tool you dont need, the only advantage it not sliding in darts, only dropping, and even then it is nearly usless, with the same profile as a mag
The amount of people who dont understand the very simple concept of a speedloader in this comment section is both hilarious and embaressing.
Hey milking Im really into nerf and I was wondering if you sold this anywhere so I could get one for myself
Can you use a speedloader for a speed loader
That's a lot of damage!...
Haha
A magazine for your magazine
Is not a speed louder if it takes you for ever to load it.
why do you need a speedloader for nerf? Doesn't it take just the same if not more time to do this? Why not just put the darts in the magazine? Seems like a waste to even use this? You have to load that, one dart or 2 at a time, then stuff it in. I feel like its easier just to load the magazine?
Can you make a double stack magazine
Sure, why not
Soooo.... a clip to load a clip?
So your still loading it in manually
Very well made!
Can I speedload the speedloader?
what mag is that its so cool
I bought it on amazon in a 4 pack. I think lightake has cheaper ones tho.
thanks
Got them og nerd darts
Technically a stripper clip
Wait so instead of louing the mag you loud same uther mag to loud the first mag instead just careening extra mags
Brodie Gardiner yes. By the time you have loaded the speed loader you could of had them in the actual mag and they might not even work in springers but #flywheelmasterrace.
Brodie Gardiner yea I noticed that
@@aaronmccarus2925 well speed loaders are pre loaded before a nerf war so you just use it to load a mag in case of an emergency
Looks similar to this item: www.etsy.com/listing/560075283/nerf-magazine-fast-loader-v2
Chris McIntosh yes
Still needs refinement. Lotta people in the comments totally missing the point of this; smh.
How to destroyed carts
Why don't u just put the darts in the mag straight away ??????????
So a stripper clip for nerf magazines
I bet i can reload faster without that
What is the point for it
That is called load your mag twice to waiste time and lose the game
can you send me the file for the speed lodder I think it would be soo cool to youse
Link is in the description
UR JUST GONA BR3AK DA CL1P
Or you can by several mags...
this is bad. you have to pre-load the "speed loader" and then take all this time to put it in the mag it would be easier to just pre-load a mag.
The comment section in this video is a fucking cesspool.
sand it down a little and i think it will work better
The sound of taking it out makes me want to jump off a bridge
That's awesome!
The speed loader is useless. It takes the same amount if time to load the speed loader as it does with the regular magazine.
The point is that u have multiple pre loaded speed loaders to use in a nerf war and this is just a demonstration
This is awesome
Its faster to do it by hand
it took u like 3 minites to load
Yeah, takes practice. I can reload in 2 minutes now.
And after load this the darts are goig to be dead.
Why do all this in a nerf war its not so effective. You damage your darts and it takes much longer. But keep on experimenting!👍
...cant you just make this with card paper?
I mean I guess? Would suck if you have to make a lot though.
it would be a lot faster than 3d printing wouldnt it?
Sure, if you take into account printing time. The only work I have to do is press a few buttons and let my 3D printer run while I'm busy doing something else.
why r u still using streamlines?
That's what I had at the time. My friend has thousands of accufakes for nerf wars, so I didn't see the need to buy more darts cuz I can just steal them from him.
Can you update your darts your darts are 2009
Why are you still using streamlines? Get with the times
Cool!
Sry but the "clip" is called a MAGAZINE
wat
Does this seem faster to you?
It's about the same amount of time to load the speed loader then mag versus the magazine by itself.
You sound like solar sands
Lol breaking darts 101
you need more subs! dis is good content
I’m the 1000 like!!!
It's a stripper clip
Just use another mag
Yeah, but I mean some benefits of using speed loaders is that they're lighter, cheaper, and smaller than mags
Shadow_Lords I have like 40 mags so it is easy for me!!
Darts
Yeah its good for airsoft why nerf its bulky
when you can't buy a real gun so you play nerf hahaha
Not sure if you know this but when you shoot someone with a real gun, they're probably going to die. Not so much with nerf.
kinda of the point of having a gun
Yeah well I'm not really interested in killing anyone. Are you?
Dumbass
THIS VIDEO SUCKS - you need to load your speed loader...