Painting Your Bumper With Spray Cans
HTML-код
- Опубликовано: 3 дек 2021
- Take a new bumper and paint it so that it matches the rest of the vehicle, and do this in your home garage using only rattle cans! The results you get from spray cans and the money you save are worth the time and effort of Doing It Yourself. all the tools used in this video are linked down here for your convenience. Thanks For Supporting this channel.
Social linktr.ee/HomieHektor
Work Stand amzn.to/3ImRV2E
Face Mask amzn.to/3xR1K44
Maroon Scuff Pad amzn.to/3dhq4CH
Adhesion Promoter amzn.to/3xRbgo5
Filler Primer amzn.to/3rzZv45
1K Clear Coat amzn.to/32YLOBE
2K Clear Coat amzn.to/3GgJzHY
Tack Cloth amzn.to/31ueamq
Heat Gun amzn.to/32SrMIN
SprayWay Glass Cleaner amzn.to/3GhOoRD
Sand Paper amzn.to/3ongi8I
Spray Can Gun Handle amzn.to/3oiBDQt
Dupli Color Paint amzn.to/333yb4h 
Авто/Мото
Bro i have to say this is one of the best videos out there on the internet. Clear, straight to the point, very very easy to follow and i did NOT get bored the entire video!!! Thanks man, respect from London, UK!!
Agreed! 👍🏽
What brand is the scruff pad
Thank you, I enjoyed this video. Will try on my jeep bumper!
I am impressed! Looks good. If anybody sees any imperfections. They we’re standing to close anyway ! Lol
Great video, thanks. Doing my bumper now.
Turned out great!!!!
Just a suggestion.. before you wet sand primer hit it with a light guide coat . Just dust it with any black paint.itll show up any imperfections 👍
Hektor, only YOU can make a paint job with a can look like it was done in a professional body shop. Man, wish i had your experience on stuff like this. I tried on my bumper to do a tear down and minimal body fill and never made it to paint as I just couldn't get it to look right...Now i know why so see so many cars in primer and filler...LOL keep up the awesome videos from the 2nd best East Coast MA.
Nice results! Thank you for this helpful vid!
Hey homie.... how about when you are painting... give us an approximately how many cans you use in your videos.
I am using your advice. Great videos
Awesome job.... Thanks for the brilliant tips!
Great commentating, good example, right to the point good video
I'm getting ready to do the top half of my Ford ranger bumper, I'm sanding down the wrinkled finish first. Thanks for this video, it's very instructional.
Always killin' it with every chingadera!!
Your the man Hektor!
this is exactly the vid I was looking for. I have some damage to my lower bumper cover and all i need to do is replace that. Its a small part compared to the rest of the bumper cover. Since I'm not doing much painting to it, I didn't want to buy all that other gear just for such a small part. This video is perfect for what I need to do.
Thanks for posting this great video. Just what I needed.
Great Job! Better than I Could've done. But I Learnt Something New too..... Also, It helps to warm the rattle can a little bit before spraying.
Thank you!!😘😘🙌
Thanks for the video. im looking to do this here soon.
Very clean and professional work specially coming out of a rattle can.
awesome vid!! really like your channel. One thing that might help is that you can rotate the little nozzle 90 deg on many spray cans to change the spray orientation from horizontal to vertical.
Great Job buddy!
I followed your steps and my bumper came out looking factory painted , thanks
I used to work in a body shop. Just got a used bumper for my Monte Carlo. Going to start on it next weekend. I was wondering about how rattle can would turn out. I was just looking up paint. Watched your video and very good job. I've got a little more work to fix some gouges and stuff but easily doable for me. Not bragging. I'm not going to pay when i can do it myself. Plus I really like body work and fixing shit myself. Great job again
💥I NEED TO DO THIS😁NICE WORK👌
If the seller says it's primed does that mean you can skip the first step? Or should you not trust them?
Looks good homie nice work
Nice one, bro.
Nice job
Thank you!!
Homie you should do a car detailing video.
Hektor, don't we need SEALER for to prevent cracks & etc , and make bumper more durable? Which brand & type of SEALER would you recommend?
good work, our daily cheap car could use that treatment when i replace the cracked bumper. It's not worth taking to a shop, but half a days work on a saturday? sure.
Not bad for a vato loco from the varrio 😎
Just as a heads up, the Duplicolor 1k Clear has a really tough time giving the *deep* shine many look for; Spray Max 2K Clear has been used over Duplicolor and gives a really nice shine especially for a spray can. I'm going to be trying this type of project here in just a couple of weeks.
Also has a waaaaaay better spray pattern that makes it easy to overlap and faster coverage.
How many cans of clear coat?
Can’t a buffer be used to shine it up like a mirror?
What was the total estimated time it took to paint the bumper?
how many cans of paint did you use for this whole job?
Awesome! So you only need 2 16oz paint spray cans?
thank you sir ✌️✌️✌️
I have a used plastic bumper that I want to paint a dark blue. The used bumper is a lighter blue. What do I have to do differently to paint it?
Did you not use flexible primer?
The amount of overspray that stuck to that car outside the garage....
Exellent job bro, looks oem
Hektor nunca falla
No, it’s not bad for a rattle can job. Yes! really narrow fan spray.
How many cans of base and clear coat for that bumper ?
Thanks
How many cans did you use?
How many cans of base coat do you need for a bumper for a Honda Civic?
How many cans of paint did you use?
How many cans of clear did your bumper take?
Homie!
Great video!
A problem I have with rattle cans is coverage. Starts getting expensive to do a bumper correctly when each can is $12 or so...
Think 500$ for 1 bumper vs 200$ spray can
@@philippesilva2275 i spent 130$ to fix and repaint my old bumper compared to $460 for a new painted one
so how do you know if its scuffed up enough to start putting primer
Do you have to put more primer even if the bumper comes pre primed?
Good question bad thing he didnt reply because i needed to know now
@@seleniarios2316same
All depends on how well pre-primed it is. Most of these are aftermarket bumper covers and the coating is of questionable quality. When you are doing so much work already, you certainly don’t want to see peeling and chipping a couple of months later. Best to scuff, re-prime and then paint.
Can this be done with plasi dip?
Nice job. How long did the whole process take you from start to finish?
To be honest that depends on you. I think prepping takes a whole day, then the next day you can start in the morning till evening. Then u gotta dry it up for 24 hours. So it takes 3 days total.
I saw this video about a year ago before painting an OEM Toyota bumper, and wanted to mention that the Duplicolor I used to match the Super White on my daughter's 2013 Corolla did NOT match very well. I also had terrible problems with splattering out of the can nozzles. The paint application looked OK, but clearly did not match the car. I used Eastwood 2K clear which went on well, but it started peeling about eight months later😢.
When painting stuff the color will never match the rest of the car perfectly unless it's a new car a cpl yrs old. A car sits outside in the sun all it's life, fading the paint that comes on it which is why new paint won't match perfectly. Was it a brand new bumper?... Did you clean the bumper? Watd you use? And what kind of adhesion promoter did you use? & what kind of primer. When using spray cans make sure you have a rag to clean off the nozzle so paint won't dry and cause spatters. Also put the cans in hot water for about 10 15 min before use. That makes the cans under more pressure and let's it spray way better cause there's more pressure to push the paint out!
So I am totally ignorant about painting such things. The bumeer I purchased is primed so do I need to skip all the priming steps?
Great video brother! 1-10 it's a 12...
Should he have used sealer primer?
Duplicolor paint is fine, but don't use the Duplicolor clear or the Rustoleum primer. The spray patterns are awful. The Rustoleum primer gives you stripes because of that small cone spray pattern. I made that mistake and will never use it again. Spend the money and use SEM primer and SprayMax 2K clear. The fan patterns on those are phenomenal. Just get a good paint respirator meant for organic vapors when spraying with 2K clear, and cover as much skin as possible and wear goggles. Keep the filter in a sealed ziploc bag and replace them after 8 hours of use.
Can you tell what type of SEM primer to use? There are this options :
1. SEM 39683 Self Etching Primer
2. SEM 39133 Flexible Primer Surfacer
3. SEM 42013 High Build Acrylic Primer
And so on, so what type i should use for plastic bumper? I'll use 040 Super White II color paint for toyota camry. Thanks in advance!
Can I just come to Pomona and pay you to do it? I just bought a new used car today and I would love a funky bumper.
U and bedistinct sound just alike
Hey hektor,,donde puedo conseguir la pintura que sea idéntica a mi carro
Puedes conseguir los botes por Amazon, o en un autopartes como Oreilly’s 🍀
Do you mind if I do a reaction on this video on my platform❓
Not at all, go for it 👍🏼
Do you live in Pomona hector
Yeah 👍🏼
The reviews for that clear coat are not good at all. For the price it costs, might as well get the 2k Spray Max brand gloss which gives a pro paint shop gloss, has a wider spray pattern and dries quicker.
Funny it’s not the same colour as the car 😂😂😂😂
Fuck duplicolor@ I bought two primer cans. One ran out of air when only about 10% of paint was sprayed. The other one leaked all over the place...
sadly the colour isnt spot on like Hector said. When you look it. Tho pretty good job with the rattle cans. Keep up the vids!
What I'm getting from this is that spray can painting SUCKS and you should just use a spray gun
Sure and the paint and you're going to need a pretty big air compressor to make enough PSI to use a professional spray gun. Have you priced a spray gun and compressor?? And hoses and solvent to clean it when your done? He just showed you can get very good results for under 100 bucks .
aboslute trash clear coat wouldnt use this