Snapper SR-Series with 10HP Briggs and Stratton ~Stored 10 Years~How to Make an Amazon Carb Work
HTML-код
- Опубликовано: 27 июл 2024
- I bought a Aftermarket Replacement Carburetor from Amazon but it wont run the engine properly!
In this video I show what I do to make one of these carburetors work properly.
This technique works for ALL engines.
You will need some small machinist drill bits that you can find on Amazon.
Check out my other video on this Snapper Please
Part-1 Here
• Snapper SR-Series with...
Caldor Tractor Wiring Troubleshooting
• 1988 Caldor MTD Lawn T...
Explanation on Direct Fit & Original Equipment Carbs 0:00
Carb Functions & possible engine problems (reversion) / diagnoses 1:55
Carb Installation 5:20
Battery Cables / Installation 9:03
Pre-Startup maintenance & Test Fire Diagnostics 10:00
Carburetor Bench Tuning (Jet Drilling) 15:04
RE-Test Tune & Diagnostics 18:02
Carburetor Bench Tune (Drilling Jets) 22:21
Re-Test again 23:39
Explanations-what I did, what happened 28:01
Electrical (views of the electronics/wiring 30:35
Carburetor Linkages / Closeups 31:20
Outro - Explanations & Final thoughts 31:41 Хобби
Where can you purchase original equipment carburetors for a reasonable price ??? This is a real down to earth video you have done Sir. Well thought out and facts to boot.
Thank you, You can try STENS for most parts.
Things will get expensive fast, especially these days. In some cases its worth it.
Its a great question and I've been thinking about it again.
For smaller engines say 2 strokes, what is original equipment? Most companies are Chinese anyway.
Walbro and others I've seen but I am seeing names I don't know for original equipment.
Thanx fer watchin
I thought long time on how to, hot rod my snapper, i put a 19 hp g1 with direct 90 degree 6 speed trans it mows great for 3 yrs now.
Sweet! I've got a bunch a vids on these now!
Arch you really did your homework on this video and i honestly believe this is one of your best videos yet. Well explained, edited with good views and angles along with excellent audio. Keep up the good work the OLD MAN at EP over and out!
Thankyou!
I've been trying, so much to learn and ya gotta hand it to the people that really do a fine job at this!
Love these Snapper videos, always great tips to be learned. Thx Arch
Glad ya liked it, that's an older video! They are fun
Exactly what my Snapper is doing!!
Thanks for watching!
Good luck fixing it..
I'm looking forward to making some time to do axel and transmission work next!
Have a TB30r with Briggs & Stratton powerbuilt 10.5 hp......Original replacement carb was $103......Got one off Amazon for $18......Runs great..........
I luv these stories! Thanks for sharing!
Yup, briggs carbs are the best but often I find aftermarket works well! I use the HIPA carbs but I have had some issues.. They respond to my requests quickly.. I always open them up 1st and check before I use them!
Great vid as usual Archo loved it ...love the man cave
Thanks Garfy!!!!!!
Great job learned alot👍
Great!!
Thanks for watching!
I bought a snapper 281016be for $250, and it ran good until I ran over some leaves and it stalled. When I turn the key over sometimes it’ll make a buzzing noise or it won’t make any noise at all. I’m not a mechanic but hoping some RUclips tutorials will help me get it working, any idea where I should start looking at?
Sure,,, Start with charging the battery! Check it as well, it should be 12 volts at least so check it before and after you charge it.
Clean the battery terminals and connectors with a wire brush.
From there you will need to go deeper and ya gonna want to watch some videos on this.
I do have a video in the folder on electrical
@@TheNovaJohn Sure thing, I’ll give that a go! Thanks for the reply
just fir fun put the small red oem fuel filter on it >?
I have them, you see this machine in other videos too, runs great now.
this tank is high enough and a pretty good shot to the carb so its fine.
@TheNovaJohn worked on em 90"s
Customers would put big ones on them bring in change out vroom . 😳👏
Just got a 10 28 back from the shop with a new control brackett. It will only start with gas sprayed into the carb. It runs for a few seconds, smokes alot and then cuts off. There may be some reversion too. Does anyone know how I might fix this?
wow,, well its way to much to write here and I do have many videos on going over engines..
check your compression and valves and if all that is ok then rebuild the carb.
I just bought one of these and mine seems to have a choke stick that is pulled up to engage and the machine won’t run without it being pulled.
Sounds like its time to pull the carb and rebuild it or replace it!!
Thanks for watching!
What spark plug and gap is OEM?
It depends Tim,,
I've seen NGK and Champion Plugs, Even Briggs logo's on these.. Remember there were a few different motors used. Check you motor number.
That number is either on the pull starter/blower cover or the Rocker Cover and sometimes on a side cover..Again that depends on the engine type and size and date
Thank you. I'm helping step son in law get his snapper working.
That's my next step. All the stickers with M/S# didn't help. Keep up the great videos.
@@timtweet8149 Thanks Tim,,yea it can be annoying with these machines, I don't know why snapper got sloppy like this but back in the day, a snapper mechanic probably knew enough that he didn't care..
Not the end of the world though..Check out the other videos in this series, They are in a folder and more are coming soon!