Setting up multiple Colorlight Cards in a single panel with FPP v6.3 and LED Vision 8.5 (2023)
HTML-код
- Опубликовано: 10 сен 2024
- In this video we setup multiple Colorlight 5A-75B controller cards , working together to run a large P5 panel.
We then demonstrate the setup of FPP on a Raspberry Pi Pi4 & finish with a quick demo of a sequencefrom xLights.
Be sure to check out the other videos in this mini series:
Panels - • LED Panels - An Introd...
Controllers - • LED Panels - An Introd...
FPP Setup with RPI-P10 Hat - • LED Panels - An Introd...
xLights Setup for a panel: • LED Panels - An Introd...
Software
---------------------------------------------------
xLights: geni.us/prs_xl...
Falcon Pi Player: geni.us/prs_fpp
LEDVision Software: geni.us/prs_le...
LED Panels & Accessories
---------------------------------------------------
geni.us/prs_home
Product Geo-Links
---------------------------------------------------
Raspberry Pi: geni.us/prs23001
Colorlight 5A-75B Receiver: geni.us/prs_5a75b
Meanwell 5v PSU: geni.us/prs_mw5v
Follow us on Social Media
---------------------------------------------------
Facebook: geni.us/prs_fb
RUclips: geni.us/prs_yo...
Hi. I have a system setup here with 3 receiving cards which are all powering 10 modules each. My question would be how do I configure them to work as one big screen with a portrait orientation? I'm having 3 same images corresponding to the 3 cards. I think im missing something. Thanks!
Can you have a different quantity of P5 panels on multiple Colorlight cards or are they required to have the same quantity of P5 panel?
I cannot get the FPP "LED Panels" to work with my P10 1/2 Scan 96x96. ( 3c x 6r of 32/16 P10 ). I am sending the FPP via HDMI to Colorlight Sender S2 and yhen Colorlight 5A-75B. But FPP does not seem to have the option of 32x16 1/2 scan. Is this critical? I have got FPP ( on a RpiZeroW ) working fine sending a Virtual Matrix (96x96) to TV screen via the HDMI output. Have I missed something.
It can be added fairly easily, I’m travelling right now but will respond tomorrow when I’m back in the office
Greg. I am still stumped. I can make a 96x96 Virtual Matrix display on a TV .. but when I move the HDMI cable to my S2 Sender .. nothing. I know the S2 Sender is working because I can see the FPP boot text. My IP etc.
My application is a Starting Signal panel for our boat club. Quite simple graphics. But different HDMI sources. One is an iPhone app to run the Starting Flags in Quadrants onto the 96x96. Second is HDMI from LEDVision on a PC for other Flag Symbols or Timers or Fun Text. Third is FPP in RPiZeroW using BigButtons on either iphone or Android. The big Buttons will be attached to XLight/FPP files stored in the RPiZW.
Please can help me configure S2 controller device
Ayuda, recibing card i5a and 5a 75b
The problem of the laptop not reading the LED vision