Thanks so much! We'd love to see some of your work! If you're not already, join our Facebook Group below - it's a great community where over 20,000 members of the TRW Crew share their creations, tips, and tricks. It's a lot of fun! 🥰️ - TRW Haley facebook.com/groups/592565454142124/
Just found you on TIK TOK and now RUclips. I don’t have any of these supplies but one day want to get one since I just started a small clothing business. I’m limited with iron one and tie dye but gotta start somewhere. So definitely following and subscribing for lessons for when one day I do get the different equipment for this stuff.
Thank yo for sharing this! I went to Walmart to purchase a spray adhesive sealant. Came home and ran across this video today and this is a game changer. I have put the vinyl sealer in my amazon cart to purchase.
The Vinyl Shield is awesome stuff! Be sure to offset it so it's larger than your decal and give it at least 24 hours before washing to achieve the best adhesion possible :-) Did you know we're live every Monday night 8pmEST on our youtube channel? Hope to see you there! We chat, answer questions, and have some pretty awesome give aways! -TRW Crystal
Hello again, so I did the tumblers but I messed up the first one I did. I eyed balled it and the vinyl shield stuck to the vinyl and when I tried to remove it it left a residue on the vinyl. How can I remove it? I will start watching your live videos. Also I bought a light board too so now I think I will be good to go
We invented it! :-) If you'd like to explore our channel, there's other materials that are unique as well! Be the first in your area to create things like this and really wow your customers! Check out by searching our channel: Bling Anything, HTV Anything, Bling Sheets for starters! -TRW Crystal
Thanks so much! Trying out new things and sharing our tips/tricks is important to us. Do you come to our free Live trainings each week? Mondays here on RUclips, 8pm EST. -TRW Pilar
I do have a question though. The vinyl shield material on the web page says it's 12"x12" but it shows a roll ? And what you used in this video is on a roll. Is it available in a roll for us?
Check out some of our videos on doing a full wrap with rhinestones. :-) It'll be the same tricks with the backing etc up until the stone portion. -TRW Crystal
You can sometimes get 1-2 uses out of your tape on one project, but the official answer is that you shouldn't reuse your application tape. 😊 - TRW Haley
Great video. Is the vinyl shield used with either permanent or removable vinyl? If used with removable vinyl, does it hold up as well and sort of make it more of a permanent application?
Hey there! It can be used to cover and protect a variety of surfaces and materials. It could definitely increase the lifespan of a removable vinyl. - TRW Haley
Wondering if this would be useful on plain everyday mugs... I always think you need sublimation mugs, but using the Vinyl Shield you should be able to use any kind of mug, right?
No epoxy needed. The Vinyl Shield when applied in an offset will get stronger the longer it sits. Be sure to wait 24-48 hours before washing so it can get a really good bond first. Make sure the surface is sterile, dry, and of no texture (such as powder coating, etc). -TRW Crystal
Hi there! We recommend 2 things: You can try using a rubbing alcohol mixture before applying your decal, which is 9/10 water and 1/10 rubbing alcohol. You can also try using a heat gun on the decal to get the bubbles out! -TRW Bri
Hi!What is the best vinyl and adhesive tape?I have problem,my vinyl doesnt want to stick to resin,what can I use to seal it?And vinyl lift after I pour resin top coat
Likely not if the regular adhesive vinyl won't stick. There could be multiple reasons why: Is it a powder coated cup? Is the surface not clean and sterile? Is the vinyl 631 vs a 651 or our ColorSpark? The Vinyl Shield likes to apply to smooth clean surfaces, same with regular sign vinyl. We use Vinyl Shield as an extra protective layer, like, well... a shield. It keeps opals from scratching, and very delicate designs from lifting, etc. -TRW Crystal
Shipping is determined by the carrier. We don’t make anything on shipping, and some countries add a duty. You can select other shipping options at checkout, too. Let us know if you have any questions! -TRW Pilar
Hi Matt, just discovered your channel here in The Netherlands. Question: how thick (in micron) is most of the vinyl you use for your projects? Looks like it is much thinner than the ones here (70-100 micron). Do you also ship to The Netherlands? Great to watch all these video's, learned a lot in just a short while. Keep up the good work!
So happy to have you here! Siser EasyWeed HTV is 110 microns, this is the HTV we mainly use for projects on our channel! We do ship to the Netherlands just not chemicals or cutters! -TRW Maegan
I used the ColorSpark vinyl shield on the Manna color changing cups (which is linked as an Amazon favorite on the TRW website). Followed all the steps, let the cups sit for 24+ hours and the vinyl & shield peeled after going through the dishwasher. Do I need to let it cure longer? The material seems similar to the Starbucks cups.
Hi there! There could be a few different factors that could be causing problems in application. Please call us at 941755-1696 so we can try to rule out what it could be! -TRW Bri
We don't use clear vinyl. ColorSpark Vinyl Shield can protect your smooth adhesive vinyl creations from lifting, water and even the sun with the UV protectant we had built in. :) -TRW Pilar
No need to seal permanent vinyl as just a decal on a cup :-) But if you have a delicate design, or something scratch prone like opal, then yes, that's when we use vinyl shield. -TRW Crystal
How well would the Vinyl shield adhere to shimmer/glitter vinyl? I often struggle sealing shimmer/glitter vinyl. Will definitely invest in this product nonetheless 👌. Thank you for sharing, stay safe.
We have textured glitter as well as a smoother surfaced glitter on site. We prefer to apply over smooth surfaces, it just decreases the amount of air pocket space you see and helps with the grip of the shield. We have quite a lot of vinyl shield videos, if you'd like to search the keywords on our channel it'll take you down a fun rabbit hole lol! Side note, be sure to offset the shield larger than the thing you're out to protect. You want a smooth non textured tumbler as well. The longer this material sits, the better it sticks. Give it at least 24 hours before washing. We're here if you have questions along the way. -TRW Crystal **We're live every Monday night, 8pmEST on our youtube channel showing how to work with various materials, and giveaways. To join in on the fun and ask us questions live: Hit subscribe, and during the live this will open a live chat button where you'll see the rolling chat feed. Just comment, ask us questions, and make some new craft friends! Winners are chosen from comments randomly. Hope to see you there!
Certainly! Just be sure (as with any vinyl) that your size is suited for your shape. Example, a wine glass. If you're needing any kind of larger size you'll have to contour shape your decal first, such as in silhouette, there's a conical warp option. Just something to be aware of so you don't get that dreaded edge curling :-) -TRW Crystal
Hi Matt just stumbled onto your vids , Can you advise me of where I can get Vinyl Shield in Australia ? Unfortunately buying it from the US is a bit expensive and the postage is way out of my budget thanks Julie
Hi there! Sorry about that :-( Unfortunately our products are based from our warehouse in Florida, we don't have any branches overseas at this time. :-( -TRW Crystal
It will. However, condensation happens on the outside of the bottle, not in between the vinyl and bottle. It's developed when cool meets warm in the atmosphere. If your regular vinyl is peeling from the sweat, then there may be a bad bond (as in powder coated or other forms of texture) which allows little cavities for water to invade and weaken your bond on the cut edge of your decal. Be sure to clean the surface and have it sterile first as well before applying and do not touch (finger oils are the enemy.) If you use our Vinyl Shield, then cut it in an offset larger than the decal you're protecting. You want it to fully encase what it's covering to form a "shield". The same rules apply for texture, Vinyl Shield likes a smooth clean surface. Leave it to sit a day or two, as the longer it sits the better it sticks, before washing and handling. If applied correctly, and to the correct surface, it will be top rack dishwasher safe. -TRW Crystal
I did the light card stock settings for my cricut explorer and it cut through the backing. This made it so hard to remove from the mat. Is there a better setting to use when cutting the vinyl shield?
The guide chart on site recommended the light cardstock / 272. Might want to test cut with some other settings, not certain why yours cut all the way though :-( www.therhinestoneworld.com/colorspark-cut-settings -TRW Crystal
We have many fonts that will give the "offset" design you are looking for. I will attach the link! www.therhinestoneworld.com/TRW-Flutter-Shadow-Font_p_19769.html -TRW Abby
Try the Light Cardstock setting. We do always recommend you do test cuts on any new material, as the life of your blade and your own machine calibration can affect the cuts. Here are our Recommended Cut Specs: www.therhinestoneworld.com/ColorSpark-Vinyl-Recommended-Cut-Settings-_b_143.html -TRW Pilar
You mentioned making print cut stickers that can go through the dishwasher. I got the vinyl shield and it made it better but what brand of vinyl sticker paper do you use so they don't curl up on the ends or come off because the adhesive has softened?
We use our brand on site - ColorSpark. To use Vinyl Shield you'll need to offset it to fully encase the decal you're protecting. This will help with the edges as well. :-) -TRW Crystal
@@TheRhinestoneWorld OK, I got on your site and I'd like to get some but I want to make sure I'm getting the right thing. I see rolls of color spark vinyl But I'm not sure if this is printable. Do you have a link to a product I could print and cut?
Ah printable...ok, for layerable Adhesive Vinyl, we use our ColorSpark permanent adhesive vinyl. If you are doing print then cut, the only printable adhesive vinyl we carry is the Siser ColorPrint Easy, which we use with our Roland Versacamm. This printable vinyl is a professional vinyl which only works with ecosolvent printers. Hope this helps! -TRW Pilar
We prefer a cure time of at least 24 hours. The longer it sits, the better it sticks, just like regular decal permanent vinyls. This is just much thicker, so it needs a bit of time to come into it's full grip strength. It won't work as well on powder coated or any kind of textured surfaces. -TRW Crystal
Not certain what photo top is, sorry about that! Vinyl Shield, you cut as an offset, apply, give it a few days to really adhere, then it protects your opal vinyls from scratches, your printable vinyl (for tumblers) and is top rack dishwasher safe! -TRW Crystal
I have a coated tumbler that I'm put a decal on with the vinyl shield and I've had it on tumbler for a few days and now the vinyl shield isn't sticking. How can I fix it?
Good question! There's no need to add it to htv, but if you do, make sure the offset is a bit larger since it likely won't stick to the htv very well. Vinyl Shield likes a smooth surface, even powder coat makes it finicky. The longer it sits the better it sticks, so give it some time after applying to regular surfaces. As for permanent vinyl, yes, we often use it to protect delicate vinyl such as opals that scratch easily. -TRW Crystal
You can but it is more difficult to line up after the decal is on the tumbler. Matt had done a full cup with some of our adhesive vinyls and tested them out, washing the cup to see how they held up. A few months later, he added the Vinyl Shield over the top of the whole cup, since it was a full wrap around design. Parchment paper will be your friend trying to line things up. -TRW Pilar
Why not cut registration marks, with the bottom layer, then laminate over the letters, then cut the laminate using the registration marks? Wouldn't it be easier than trying to overlay the weeded transparent laminate onto the bottom layer? Just curious
It will. Vinyl Shield works best on smooth clean surfaces, glass will be great. The longer the shield sits, the better it sticks, and be sure to avoid wrinkling on the edges of your decals, warp your design before cutting to fit the curve of the glass. -TRW Crystal **We're live every Monday night, 8pmEST on our youtube channel showing how to work with various materials, and giveaways. To join in on the fun and ask us questions live: Hit subscribe, and during the live this will open a live chat button where you'll see the rolling chat feed. Just comment, ask us questions, and make some new craft friends! Winners are chosen from comments randomly. Hope to see you there!
Hi! I just purchased your vinyl shield and I was wondering if it worked on wine cups as well? I tried some last night on a stemless wine cup and this morning I checked it and it peeled right off. So I was wondering if maybe I did something wrong or maybe it just doesn’t stick?
I just got my first order of the vinyl shield and I LOVE IT! And it makes applying the vinyl so much easier too. I do wonder if you have any suggestions on what to do about the gaps in the letters, like the roundish spot in an R. When you push the shield down in that small spot, it doesn’t completely stay adhered. Still love it though. Will be buying more soon!
We don't recommend having any vinyl touch where food will touch. If you're decorating the outside of the tray or dish, this would be great to protect the vinyl. -TRW Pilar
We have many fonts that will give the "offset" design you are looking for. I will attach the link! www.therhinestoneworld.com/TRW-Flutter-Shadow-Font_p_19769.html -TRW Abby
Vinyl shield should be overcut (larger) for sure. You want it to fully encase the vinyl it's protecting, even the edges. I personally like to be roughly about a quarter inch larger than my design. -TRW Crystal ******Did you know? >We're LIVE -- EVERY Monday night at 8pmEST on our RUclips channel! >>We TEACH how to use our products, have some pretty awesome GIVEAWAYS (Even Cameos!), and if you hit subscribe (FREE!), it will open up the chat option during the live. >>>You can hang out, ask QUESTIONS and have FUN as we go! >>>>We also offer tiers of paid MONTHLY subscriptions that have a variety of PERKS, sneak PEEKS, extra TRAINING, free DESIGNS, first DIBBS on new products, extra COUPONS, and FONTS all depending on the tier level selected!
Does anyone know if you have to mirror the name/image (with htv vinyl and htv anything) when cutting if you're going to put final product on a tumbler?
@@TheRhinestoneWorld perfect! Thank you! Also, I haven’t heard you mention that in any videos so it would be helpful to others, I think! Thanks again. Love your tutorials!
This was an interesting video and I like the idea of the vinyl shield but it also appears that the overlaid edges are not sticking to the tumbler almost like things could catch on it. Am I just seeing this wrong? I think I would cut them the size of the lettering when I try it.
We're glad you asked, we love questions! The vinyl shield is a material that gets stronger the longer it sits applied. You do need to give it at least 24-48 hours after applying before tossing it in to wash. You want the vinyl shield cut in a decent offset so it can perform correctly. It's the "shield" that is protecting what's under it, so by offsetting you don't get any vulnerable points with cutting it flush. Think of a layered cake. Where the vinyl is at the bottom and the shield is at the top. If you slice them then you have the exposed edges of both materials where water, etc can easily reach and separate them. Now if you put a cover over the cake with a dome cover or a lid, it's perfectly sealed and protected by that "shield". That's why you want the offset. :-) We're here if you have any other questions! - We go live every Monday 8pmEST on our RUclips channel! This week we'll be making rhinestone shirts! To enter for giveaways during the live, be present at the live training and hit subscribe (the free option), and that will open a chat button. From there you can join in the rolling feed of other viewers. Comment, ask questions, and the winners are chosen from the random comments. Hope to see you there! -TRW Crystal
Thank you for the reply. I watched the video again and this time took a snapshot of the finished tumbler so I could enlarge the picture to see that the edges of the ‘shield’ are sealed down to the tumbler. I’m looking forward to trying it out. Thanks again for sharing. I did subscribe too. :-)
We linked it on our home page at TheRhinestoneWorld.com. Click the template that says Amazon Products We Love then go into Production. There's a treasure trove of goodies in there that we use. -TRW Crystal ******Did you know? We're live EVERY Monday night at 8pmEST on our RUclips channel! We teach how to use our products, have some pretty awesome GIVEAWAYS (Even Cameos!), and if you hit subscribe (FREE!), it will open up the chat option during the live. You can hang out, ask questions and have fun as we go! We also offer tiers of paid MONTHLY subscriptions that have a variety of perks, sneak peeks, extra training, free designs and fonts depending on the tier level selected!
You might consider using HTV Anything instead of Vinyl Shield for a project like that! You do have to use HTV + heat rather than adhesive vinyl, but I think you would get better results that way! - TRW Haley
It sure would. Be sure to offset the sticker so the Vinyl Shield fully encases it with some overlap. You want a really good seal over the edges to what it's protecting. -TRW Crystal ******Did you know? We're live EVERY Monday night at 8pmEST on our RUclips channel! We teach how to use our products, have some pretty awesome GIVEAWAYS (Even Cameos!), and if you hit subscribe (FREE!), it will open up the chat option during the live. You can hang out, ask questions and have fun as we go! We also offer tiers of paid MONTHLY subscriptions that have a variety of perks, sneak peeks, extra training, free designs and fonts depending on the tier level selected!
@@TheRhinestoneWorld hi one more question..This can be cut in cricut right? If yes what settings? Sorry for so many questions but i wanted to know before buying as i use cricut for my projects
Sorry for the delay in reply! Here's our cutting chart split out for silhouette and cricut -- if you can't find this comment again, it's located on TheRhinestoneWorld.com at the very BOTTOM of the screen, the small words under Learn, FAQ, Cut spec settings which is the 4th down the list, then you want Colorspark Vinyl and the chart is there. :-) therhinestoneworld.com/colorspark-cut-settings -TRW Crystal
This is our ColorSpark Vinyl Shield and is exclusive to TRW. You can get it on our website, TheRhinestoneWorld.com. Great timing, since our Black Friday sale is currently going on and it's discounted! Let us know if you have any questions. -TRW Pilar
What happens to the vinyl sheet if I heat press it? I’m thinking about my process and would love to heat press the whole decal in one step to the material and the initial material needs to be heat pressed.
This is for adhesive vinyl, not htv. We have other material to turn htv into a decal: ColorSpark HTV Anything. With HTV Anything, you can press htv to it and break some of the typical pressing rules--you can layer glitter htv on glitter and even layer hotfix rhinestones on top of the htv! The HTV Anything is the bottom layer, it's clear and has a strong adhesive backing. This is what we use to make our full glitter and rhinestone tumblers. :) -TRW Pilar
We have many fonts that will give the "offset" design you are looking for. I will attach the link! www.therhinestoneworld.com/TRW-Flutter-Shadow-Font_p_19769.html -TRW Abby
do you have a video showing how to apply vinyl shield onto a wrapped tumbler? Is there special way to apply the mask? Do you cut it and apply it to the wrap prior to application to the tumbler?
I'm sorry, I just saw this comment! Sometimes they get buried fast. Yes, assuming the surface is clean, do not touch the shield (use transfer tape), and be sure to account for the curve of the glass. You may need to warp your design so there's no edges that crinkle on the taper. -TRW Crystal
Think of Vinyl Shield like an actual shield. You want it cut in an offset to fully encase what it's protecting. If the edges are flush then you've only layered vinyl :-) -TRW Crystal
Do you mean does the Vinyl Shield have uv protection? Very minimal, but adhesive vinyl will generally take a long time to fade anyway. Vinyl Shield is to protect delicate designs, and opals from scratching. -TRW Crystal
Can i use this over a sticker? I make snowglobe tumblers and those are on thick plastic tumblers so i cannot epoxy them and everything else i have tried still makes the image bleed eventually...or fade or smudge. Its a round customized image will cutting out a to size circleml over it protect it feom the smudging and wearing the color off? Peeling also eventually the sides started to peel up after a few hand washes 🥲
We use Vinyl Shield on many types of items, just like the helmet he demonstrated in the video. The ink on the decal looks as brand new as the day he applied it. With Vinyl Shield, you want to overcut to fully encase the decal you're protecting. The edges, everything, do not cut it flush, water etc will creep into the exposed edges. Next, the longer the shield sits after applied and the air bubbles are worked out, the stronger it sticks. It needs a touch of time, and heating gently with a hair dryer works as well to get that initial bond. Do not make decals larger than they can accommodate on a tapered, curved surface without warping to size as this encourages weak edges and bubbling on just about any vinyl. So size properly is needed. Lastly, as with any decal, wipe down your cup with rubbing alcohol or wash with blue dawn soap and dry really well. Then do not touch it, finger oils are the enemy. Oil will remove or weaken adhesive on any decal or sticker. So, yes, it will protect your ink if all used properly. Give it 2 days or so and let the adhesive strengthen before attempting to hand wash :-) We're here if you have more questions! -TRW Crystal
Hi there! We'd be excited to meet you! Storefront is limited on materials. If you'd like to pick up an order locally, please place the order online 3 hours ahead of time to allow our Warehouse Crew time to pull your order and get it delivered to the storefront. We look forward to serving you! ---- We go live every Monday 8pmEST using our various award winning materials! Hope to see you at the next one, if we get enough viewers during the live, we're GIVING AWAY ANOTHER Silhouette Cameo! To enter: Subscribe to the channel and click the chat button to talk with us, that's all! -TRW Crystal
We ship world wide! We cannot ship chemicals (like our Magic Vinyl Remover), or equipment. -TRW Crystal ******Did you know? ~We're live EVERY Monday night at 8pmEST on our RUclips channel! ~~We teach how to use our products, have some pretty awesome GIVEAWAYS (Even Cameos!), and if you hit subscribe (FREE!), it will open up the chat option during the live. ~~~You can hang out, ask questions and have fun as we go!
Awesome!! We're here to help if you have questions along the way. Be sure to check out the homepage at TheRhinestoneWorld.com, there's a thumbnail there that contains free svg's (and a font)! -TRW Crystal
That's so odd! We checked and on our end, it shows English for everything, but when we click "watch on RUclips", it shows us captions are auto generated in Japanese, too....? Maybe RUclips is doing some kind of update--when Facebook does their random updates, it causes temporary issues for us on FB and Instagram. If you have any questions about ColorSpark Vinyl Shield, we're available to help you! :) And you can always email info@therhinestoneworld.com for assistance, too. Thanks! -TRW Pilar
New to designing cups. I love cups and tumblers. I'm so happy I found you!!! Love your videos!!!!
Thanks so much! We'd love to see some of your work! If you're not already, join our Facebook Group below - it's a great community where over 20,000 members of the TRW Crew share their creations, tips, and tricks. It's a lot of fun! 🥰️
- TRW Haley
facebook.com/groups/592565454142124/
Great job Matt. Love love love watching your videos. Thanks for sharing all of your thoughts, ideas and your talent
Thanks so much!
-TRW Abby
Matt you guys are awesome! Thank you for the “Melissa” tumbler...LOVE IT!!
So happy you like it! 🥰️
- TRW Haley
I need that vinyl shield in my life.😍 Thank you for sharing.😊
It's awesome!
- TRW Haley
Can’t wait to try it! Definitely a game changer for me.
Hope you enjoy it! Thanks for watching.
-TRW Bri
Just found you on TIK TOK and now RUclips. I don’t have any of these supplies but one day want to get one since I just started a small clothing business. I’m limited with iron one and tie dye but gotta start somewhere. So definitely following and subscribing for lessons for when one day I do get the different equipment for this stuff.
Welcome! You can do it!
-TRW Abby
Thank yo for sharing this! I went to Walmart to purchase a spray adhesive sealant. Came home and ran across this video today and this is a game changer. I have put the vinyl sealer in my amazon cart to purchase.
The Vinyl Shield is awesome stuff! Be sure to offset it so it's larger than your decal and give it at least 24 hours before washing to achieve the best adhesion possible :-) Did you know we're live every Monday night 8pmEST on our youtube channel? Hope to see you there! We chat, answer questions, and have some pretty awesome give aways!
-TRW Crystal
Hello again, so I did the tumblers but I messed up the first one I did. I eyed balled it and the vinyl shield stuck to the vinyl and when I tried to remove it it left a residue on the vinyl. How can I remove it?
I will start watching your live videos. Also I bought a light board too so now I think I will be good to go
Love the way your organize
Thank you so much for your support!
-TRW Maegan
Thank you! Love your products!
We thank you for the support! We're here if you have questions!
-TRW Crystal
Wow. Great content. Didn’t know this product existed before this. Thanks!!
We invented it! :-) If you'd like to explore our channel, there's other materials that are unique as well! Be the first in your area to create things like this and really wow your customers! Check out by searching our channel: Bling Anything, HTV Anything, Bling Sheets for starters!
-TRW Crystal
I’m ordering right now!!!!!!!!! Thanks Matt 😀
Awesome! Thank you! 😊
- TRW Haley
You’re amazing thank you so much for all your tricks 😉
Thanks so much! Trying out new things and sharing our tips/tricks is important to us. Do you come to our free Live trainings each week? Mondays here on RUclips, 8pm EST. -TRW Pilar
This looks great, I think I’d want to cut them at the same time to save a step! I definitely need to order this, well done!
Awesome, thank you so much! 😊
- TRW Haley
I thot the same way but the vinyl is slightly smaller then the shield
This is great Matt ! Thank you !
I do have a question though. The vinyl shield material on the web page says it's 12"x12" but it shows a roll ? And what you used in this video is on a roll. Is it available in a roll for us?
So that same 12x12 that you see there, you would just order more quantities of it and it comes in a continuous roll.
-TRW Mireya
Good video Matt thanks
Glad you enjoyed it! 😊
- TRW Haley
Perfect thank you
You're welcome! Happy to help. Thanks for watching. -TRW Tanyu
Ha funny lol I just found y'all on TikTok but already subscribed here~ Thought I recognized y'all~ Happy over here~ lol
Haha, that's awesome! Thanks!
-TRW Abby
@@TheRhinestoneWorld HUGE THANKS to y'all! I've actually learned quite a bit from your videos~ Y'all are AWESOME! ♥♥♥
Would like to see how you due a full wrap on a tumbler. I need to do full wraps on sublimation mess up trumblers.
Check out some of our videos on doing a full wrap with rhinestones. :-) It'll be the same tricks with the backing etc up until the stone portion. -TRW Crystal
Great video!
Do you reuse your adhesive transfer tape, or cut new every design?
You can sometimes get 1-2 uses out of your tape on one project, but the official answer is that you shouldn't reuse your application tape. 😊
- TRW Haley
Great video. Is the vinyl shield used with either permanent or removable vinyl? If used with removable vinyl, does it hold up as well and sort of make it more of a permanent application?
Hey there! It can be used to cover and protect a variety of surfaces and materials. It could definitely increase the lifespan of a removable vinyl.
- TRW Haley
Thank you for this video, May I ask is it possible to achieve this with rhinestone without handpicking. Thank you
Sure can! Here's one of the videos: ruclips.net/video/mhvJJLlbV84/видео.html
-TRW Crystal
Wondering if this would be useful on plain everyday mugs... I always think you need sublimation mugs, but using the Vinyl Shield you should be able to use any kind of mug, right?
Absolutely! You can either hand wash or put the mug in the dishwasher!
-TRW Abby
Hi! Great video 🙂 Do these cups not need a sealant on them?
No epoxy needed. The Vinyl Shield when applied in an offset will get stronger the longer it sits. Be sure to wait 24-48 hours before washing so it can get a really good bond first. Make sure the surface is sterile, dry, and of no texture (such as powder coating, etc).
-TRW Crystal
Any tips on not getting air bubbles when doing a full wrap with the vinyl shield on a cold cup tumbler?
Hi there! We recommend 2 things:
You can try using a rubbing alcohol mixture before applying your decal, which is 9/10 water and 1/10 rubbing alcohol. You can also try using a heat gun on the decal to get the bubbles out!
-TRW Bri
Hi!What is the best vinyl and adhesive tape?I have problem,my vinyl doesnt want to stick to resin,what can I use to seal it?And vinyl lift after I pour resin top coat
Try out our ColorSpark line of vinyl. Be sure to only apply to a clean sterile surface as well. Finger oils and such are the enemy.
-TRW Crystal
Would the vinyl shield help to attach it to surfaces better?
I've been having problems with the vinyl not sticking to cups.
Likely not if the regular adhesive vinyl won't stick. There could be multiple reasons why:
Is it a powder coated cup?
Is the surface not clean and sterile?
Is the vinyl 631 vs a 651 or our ColorSpark?
The Vinyl Shield likes to apply to smooth clean surfaces, same with regular sign vinyl. We use Vinyl Shield as an extra protective layer, like, well... a shield. It keeps opals from scratching, and very delicate designs from lifting, etc.
-TRW Crystal
If you do a print and cut can you use it like a laminate and cut everything out at once? This would be a better option for me!
Let us know how it goes, we're always up for experiments!
-TRW Crystal
😱😳I need this in my life. I did an octopus bottle and everything is coming off. Your vinyl is my favorite vinyl ever.
Vinyl Shield is tops. Esp if you want to protect your opal from scratches! :-) -TRW Crystal
@@TheRhinestoneWorld Ya but $50 shipping to Canada is crazy. Do you not ship by normal mail?
Shipping is determined by the carrier. We don’t make anything on shipping, and some countries add a duty. You can select other shipping options at checkout, too. Let us know if you have any questions!
-TRW Pilar
@@TheRhinestoneWorld Just says Fed X n UPS.
Hi Matt, just discovered your channel here in The Netherlands.
Question: how thick (in micron) is most of the vinyl you use for your projects?
Looks like it is much thinner than the ones here (70-100 micron).
Do you also ship to The Netherlands?
Great to watch all these video's, learned a lot in just a short while. Keep up the good work!
So happy to have you here! Siser EasyWeed HTV is 110 microns, this is the HTV we mainly use for projects on our channel! We do ship to the Netherlands just not chemicals or cutters!
-TRW Maegan
I used the ColorSpark vinyl shield on the Manna color changing cups (which is linked as an Amazon favorite on the TRW website). Followed all the steps, let the cups sit for 24+ hours and the vinyl & shield peeled after going through the dishwasher. Do I need to let it cure longer? The material seems similar to the Starbucks cups.
Hi there! There could be a few different factors that could be causing problems in application. Please call us at 941755-1696 so we can try to rule out what it could be!
-TRW Bri
Thank you. Just one questio, what´s the diference betweeen vinyl shield and regular clear vinyl?
We don't use clear vinyl. ColorSpark Vinyl Shield can protect your smooth adhesive vinyl creations from lifting, water and even the sun with the UV protectant we had built in. :) -TRW Pilar
Hi so this replaces the typical mod podge or polycrylic used to seal it onto a tumbler?
No need to seal permanent vinyl as just a decal on a cup :-) But if you have a delicate design, or something scratch prone like opal, then yes, that's when we use vinyl shield. -TRW Crystal
Hi hi would this work on any permanent vinyl just for protection? Also what about color changing vinyl could it be used for that? Thanks
Yes, it will work for both!
-TRW Bri
Do you have to wait any length of time before putting the vinyl shield in the dishwasher?
Yes! We recommend letting it cure for 24-48 hours before washing.
- TRW Haley
How well would the Vinyl shield adhere to shimmer/glitter vinyl? I often struggle sealing shimmer/glitter vinyl. Will definitely invest in this product nonetheless 👌. Thank you for sharing, stay safe.
We have textured glitter as well as a smoother surfaced glitter on site. We prefer to apply over smooth surfaces, it just decreases the amount of air pocket space you see and helps with the grip of the shield.
We have quite a lot of vinyl shield videos, if you'd like to search the keywords on our channel it'll take you down a fun rabbit hole lol!
Side note, be sure to offset the shield larger than the thing you're out to protect. You want a smooth non textured tumbler as well. The longer this material sits, the better it sticks. Give it at least 24 hours before washing.
We're here if you have questions along the way.
-TRW Crystal
**We're live every Monday night, 8pmEST on our youtube channel showing how to work with various materials, and giveaways.
To join in on the fun and ask us questions live: Hit subscribe, and during the live this will open a live chat button where you'll see the rolling chat feed. Just comment, ask us questions, and make some new craft friends! Winners are chosen from comments randomly.
Hope to see you there!
@TheRhinestoneWorld I tend to use more glass products. That should be fine as well right?
Certainly! Just be sure (as with any vinyl) that your size is suited for your shape. Example, a wine glass. If you're needing any kind of larger size you'll have to contour shape your decal first, such as in silhouette, there's a conical warp option. Just something to be aware of so you don't get that dreaded edge curling :-)
-TRW Crystal
Hi Matt just stumbled onto your vids , Can you advise me of where I can get Vinyl Shield in Australia ? Unfortunately buying it from the US is a bit expensive and the postage is way out of my budget thanks Julie
Hi there! Sorry about that :-( Unfortunately our products are based from our warehouse in Florida, we don't have any branches overseas at this time. :-(
-TRW Crystal
Does the Vinyl Shield also help keep the vinyl from peeling up from condensation on the bottle?
It will.
However, condensation happens on the outside of the bottle, not in between the vinyl and bottle. It's developed when cool meets warm in the atmosphere. If your regular vinyl is peeling from the sweat, then there may be a bad bond (as in powder coated or other forms of texture) which allows little cavities for water to invade and weaken your bond on the cut edge of your decal. Be sure to clean the surface and have it sterile first as well before applying and do not touch (finger oils are the enemy.)
If you use our Vinyl Shield, then cut it in an offset larger than the decal you're protecting. You want it to fully encase what it's covering to form a "shield". The same rules apply for texture, Vinyl Shield likes a smooth clean surface. Leave it to sit a day or two, as the longer it sits the better it sticks, before washing and handling.
If applied correctly, and to the correct surface, it will be top rack dishwasher safe.
-TRW Crystal
How do you put the vinyl shield all around? What is the cut size or template should I use??
You just offset it while in the designing stage :-)
-TRW Crystal
.
>>> DID YOU KNOW
I just received my first roll of vinyl shield, which side is to be cut? Is it the shiny side or the dull side?
You want to cut to the shiny side! 😊
- TRW Haley
I did the light card stock settings for my cricut explorer and it cut through the backing. This made it so hard to remove from the mat. Is there a better setting to use when cutting the vinyl
shield?
The guide chart on site recommended the light cardstock / 272. Might want to test cut with some other settings, not certain why yours cut all the way though :-(
www.therhinestoneworld.com/colorspark-cut-settings
-TRW Crystal
Is there a way to create an offset in Design Space?
We have many fonts that will give the "offset" design you are looking for. I will attach the link!
www.therhinestoneworld.com/TRW-Flutter-Shadow-Font_p_19769.html
-TRW Abby
What would be the settings for the vinyl shield on the Cricut?
Try the Light Cardstock setting. We do always recommend you do test cuts on any new material, as the life of your blade and your own machine calibration can affect the cuts. Here are our Recommended Cut Specs: www.therhinestoneworld.com/ColorSpark-Vinyl-Recommended-Cut-Settings-_b_143.html -TRW Pilar
You mentioned making print cut stickers that can go through the dishwasher. I got the vinyl shield and it made it better but what brand of vinyl sticker paper do you use so they don't curl up on the ends or come off because the adhesive has softened?
We use our brand on site - ColorSpark.
To use Vinyl Shield you'll need to offset it to fully encase the decal you're protecting. This will help with the edges as well. :-)
-TRW Crystal
@@TheRhinestoneWorld OK, I got on your site and I'd like to get some but I want to make sure I'm getting the right thing. I see rolls of color spark vinyl But I'm not sure if this is printable. Do you have a link to a product I could print and cut?
Ah printable...ok, for layerable Adhesive Vinyl, we use our ColorSpark permanent adhesive vinyl. If you are doing print then cut, the only printable adhesive vinyl we carry is the Siser ColorPrint Easy, which we use with our Roland Versacamm. This printable vinyl is a professional vinyl which only works with ecosolvent printers. Hope this helps! -TRW Pilar
Is there a cure time with it? Or can you put it straight to the dishwasher as soon as you’re done?
We prefer a cure time of at least 24 hours. The longer it sits, the better it sticks, just like regular decal permanent vinyls. This is just much thicker, so it needs a bit of time to come into it's full grip strength.
It won't work as well on powder coated or any kind of textured surfaces.
-TRW Crystal
How it different from photo top? thank you
Not certain what photo top is, sorry about that!
Vinyl Shield, you cut as an offset, apply, give it a few days to really adhere, then it protects your opal vinyls from scratches, your printable vinyl (for tumblers) and is top rack dishwasher safe!
-TRW Crystal
I have a coated tumbler that I'm put a decal on with the vinyl shield and I've had it on tumbler for a few days and now the vinyl shield isn't sticking. How can I fix it?
The issue is likely the coated tumbler. Powder coating specifically dislikes adhesives.
-TRW Crystal
Can you use vinyl shield on permanent vinly and HTV?
Good question!
There's no need to add it to htv, but if you do, make sure the offset is a bit larger since it likely won't stick to the htv very well. Vinyl Shield likes a smooth surface, even powder coat makes it finicky. The longer it sits the better it sticks, so give it some time after applying to regular surfaces.
As for permanent vinyl, yes, we often use it to protect delicate vinyl such as opals that scratch easily.
-TRW Crystal
Can you add the vinyl shield over decals that are already on the tumbler?
You can but it is more difficult to line up after the decal is on the tumbler. Matt had done a full cup with some of our adhesive vinyls and tested them out, washing the cup to see how they held up. A few months later, he added the Vinyl Shield over the top of the whole cup, since it was a full wrap around design. Parchment paper will be your friend trying to line things up. -TRW Pilar
Is vynal shield and everything vynil the same , or anything not sure of the name
Great question!
We have a video for that!
ruclips.net/video/sdWaEmQDJtY/видео.html
-TRW Crystal
Why not cut registration marks, with the bottom layer, then laminate over the letters, then cut the laminate using the registration marks? Wouldn't it be easier than trying to overlay the weeded transparent laminate onto the bottom layer? Just curious
Yes for sure! That's a way to do it as well, we just find this method to be easier but both work great!
-TRW Mireya
Will this work well on glass tumblers
It will. Vinyl Shield works best on smooth clean surfaces, glass will be great.
The longer the shield sits, the better it sticks, and be sure to avoid wrinkling on the edges of your decals, warp your design before cutting to fit the curve of the glass.
-TRW Crystal
**We're live every Monday night, 8pmEST on our youtube channel showing how to work with various materials, and giveaways.
To join in on the fun and ask us questions live: Hit subscribe, and during the live this will open a live chat button where you'll see the rolling chat feed. Just comment, ask us questions, and make some new craft friends! Winners are chosen from comments randomly.
Hope to see you there!
So this makes the vinyl on cups dishwasher safe? Just want to make sure I purchase the correct stuff.
Yess it does.🥰️
-TRW Mireya
Could you use this on plastic tumblers aswell?
You sure can! We keep ordering from Saveacup. -TRW Pilar
Hi! I just purchased your vinyl shield and I was wondering if it worked on wine cups as well? I tried some last night on a stemless wine cup and this morning I checked it and it peeled right off. So I was wondering if maybe I did something wrong or maybe it just doesn’t stick?
What kind of vinyl are you using? We only recommend using Vinyl shield over smooth, flat surfaces.
-TRW Maegan
@@TheRhinestoneWorld so the only vinyl I use is StarCraft HD and oracle vinyl.
I just got my first order of the vinyl shield and I LOVE IT! And it makes applying the vinyl so much easier too. I do wonder if you have any suggestions on what to do about the gaps in the letters, like the roundish spot in an R. When you push the shield down in that small spot, it doesn’t completely stay adhered. Still love it though. Will be buying more soon!
Maybe making the outline a little bit smaller could help with that! Thanks for your support🥰️
-TRW Mireya
Can this be used for something like a crawfish tray?
We don't recommend having any vinyl touch where food will touch. If you're decorating the outside of the tray or dish, this would be great to protect the vinyl. -TRW Pilar
@trw We have a Cricut air 2 where is offset on design space at?
We have many fonts that will give the "offset" design you are looking for. I will attach the link!
www.therhinestoneworld.com/TRW-Flutter-Shadow-Font_p_19769.html
-TRW Abby
Do you also sell a matte finish?
No sorry, the Vinyl Shield is only in this shiny finish. -TRW Pilar
Is the design and clear vinyl shield suppose to be the same size? Or how much bigger should do you recommend the shield to be ?
Vinyl shield should be overcut (larger) for sure. You want it to fully encase the vinyl it's protecting, even the edges. I personally like to be roughly about a quarter inch larger than my design.
-TRW Crystal
******Did you know?
>We're LIVE -- EVERY Monday night at 8pmEST on our RUclips channel!
>>We TEACH how to use our products, have some pretty awesome GIVEAWAYS (Even Cameos!), and if you hit subscribe (FREE!), it will open up the chat option during the live.
>>>You can hang out, ask QUESTIONS and have FUN as we go!
>>>>We also offer tiers of paid MONTHLY subscriptions that have a variety of PERKS, sneak PEEKS, extra TRAINING, free DESIGNS, first DIBBS on new products, extra COUPONS, and FONTS all depending on the tier level selected!
@@TheRhinestoneWorld awesome thank you so much
-TRW Crystal
LINK TO TONIGHT'S LIVE TRAINING (Mon 5-23-22 8pmEST) ----> ruclips.net/video/H4WEkEEcEpY/видео.html
Hi Matt, do you sell the light board?
No, but we have the link on site to them. They're under products we love / production. -TRW Crystal
Will this work for vinyl on wood?
Vinyl Shield likes a clean very smooth surface. If the wood is sealed really well and has a gloss type finish, then it should work.
-TRW Crystal
Does this work on tumblers/cups with layered vinyl?
Yes, we shield multiple layers often :-)
-TRW Crystal
Does anyone know if you have to mirror the name/image (with htv vinyl and htv anything) when cutting if you're going to put final product on a tumbler?
You have to mirror HTV materials but you do not mirror HTV Anything.
-TRW Mireya
@@TheRhinestoneWorld perfect! Thank you! Also, I haven’t heard you mention that in any videos so it would be helpful to others, I think! Thanks again. Love your tutorials!
This was an interesting video and I like the idea of the vinyl shield but it also appears that the overlaid edges are not sticking to the tumbler almost like things could catch on it. Am I just seeing this wrong? I think I would cut them the size of the lettering when I try it.
We're glad you asked, we love questions!
The vinyl shield is a material that gets stronger the longer it sits applied. You do need to give it at least 24-48 hours after applying before tossing it in to wash.
You want the vinyl shield cut in a decent offset so it can perform correctly. It's the "shield" that is protecting what's under it, so by offsetting you don't get any vulnerable points with cutting it flush. Think of a layered cake. Where the vinyl is at the bottom and the shield is at the top. If you slice them then you have the exposed edges of both materials where water, etc can easily reach and separate them. Now if you put a cover over the cake with a dome cover or a lid, it's perfectly sealed and protected by that "shield". That's why you want the offset. :-) We're here if you have any other questions!
-
We go live every Monday 8pmEST on our RUclips channel!
This week we'll be making rhinestone shirts!
To enter for giveaways during the live, be present at the live training and hit subscribe (the free option), and that will open a chat button. From there you can join in the rolling feed of other viewers. Comment, ask questions, and the winners are chosen from the random comments.
Hope to see you there!
-TRW Crystal
Thank you for the reply. I watched the video again and this time took a snapshot of the finished tumbler so I could enlarge the picture to see that the edges of the ‘shield’ are sealed down to the tumbler. I’m looking forward to trying it out. Thanks again for sharing. I did subscribe too. :-)
We're here if you need us! :-)
-TRW Crystal
Can this be used over Siser vinyl? That’s what I have right now. Thanks!
This works for all smooth, non-textured adhesive vinyl. :) Thanks! -TRW Pilar
@@TheRhinestoneWorld thanks for your reply! Just ordered some. Can’t wait to try this!
What lightboard are you using?
We linked it on our home page at TheRhinestoneWorld.com. Click the template that says Amazon Products We Love then go into Production. There's a treasure trove of goodies in there that we use.
-TRW Crystal
******Did you know?
We're live EVERY Monday night at 8pmEST on our RUclips channel!
We teach how to use our products, have some pretty awesome GIVEAWAYS (Even Cameos!), and if you hit subscribe (FREE!), it will open up the chat option during the live. You can hang out, ask questions and have fun as we go!
We also offer tiers of paid MONTHLY subscriptions that have a variety of perks, sneak peeks, extra training, free designs and fonts depending on the tier level selected!
How would you go about using this with a layered project?
You might consider using HTV Anything instead of Vinyl Shield for a project like that! You do have to use HTV + heat rather than adhesive vinyl, but I think you would get better results that way!
- TRW Haley
@@TheRhinestoneWorld thank you for your response.
Hi,this shield can be used on Printable vinyl also?Does it make printable stickers waterproof?
It sure would. Be sure to offset the sticker so the Vinyl Shield fully encases it with some overlap. You want a really good seal over the edges to what it's protecting.
-TRW Crystal
******Did you know?
We're live EVERY Monday night at 8pmEST on our RUclips channel!
We teach how to use our products, have some pretty awesome GIVEAWAYS (Even Cameos!), and if you hit subscribe (FREE!), it will open up the chat option during the live. You can hang out, ask questions and have fun as we go!
We also offer tiers of paid MONTHLY subscriptions that have a variety of perks, sneak peeks, extra training, free designs and fonts depending on the tier level selected!
@@TheRhinestoneWorld Thankyou so much so the reply.I will definitely try it out. 🤗
@@TheRhinestoneWorld hi one more question..This can be cut in cricut right? If yes what settings? Sorry for so many questions but i wanted to know before buying as i use cricut for my projects
Sorry for the delay in reply! Here's our cutting chart split out for silhouette and cricut -- if you can't find this comment again, it's located on TheRhinestoneWorld.com at the very BOTTOM of the screen, the small words under Learn, FAQ, Cut spec settings which is the 4th down the list, then you want Colorspark Vinyl and the chart is there. :-)
therhinestoneworld.com/colorspark-cut-settings
-TRW Crystal
Were do I get that stuff
This is our ColorSpark Vinyl Shield and is exclusive to TRW. You can get it on our website, TheRhinestoneWorld.com. Great timing, since our Black Friday sale is currently going on and it's discounted! Let us know if you have any questions. -TRW Pilar
Where can I purchase this vinyl
Shield? Please and thank you!
Here's a link to that product on our website.
www.therhinestoneworld.com/colorspark-vinyl-shield
- TRW Haley
What happens to the vinyl sheet if I heat press it? I’m thinking about my process and would love to heat press the whole decal in one step to the material and the initial material needs to be heat pressed.
This is for adhesive vinyl, not htv. We have other material to turn htv into a decal: ColorSpark HTV Anything.
With HTV Anything, you can press htv to it and break some of the typical pressing rules--you can layer glitter htv on glitter and even layer hotfix rhinestones on top of the htv! The HTV Anything is the bottom layer, it's clear and has a strong adhesive backing. This is what we use to make our full glitter and rhinestone tumblers. :) -TRW Pilar
@@TheRhinestoneWorld Thank you!
how would I do offset on Cricut???
We have many fonts that will give the "offset" design you are looking for. I will attach the link!
www.therhinestoneworld.com/TRW-Flutter-Shadow-Font_p_19769.html
-TRW Abby
do you have a video showing how to apply vinyl shield onto a wrapped tumbler? Is there special way to apply the mask? Do you cut it and apply it to the wrap prior to application to the tumbler?
Try this video out:
ruclips.net/video/qAkScNY9Id8/видео.html
-TRW Crystal
OMG! Perfect... thank you so much
Happy to help! We're here if you have questions, and have quite a lot of other wrap designs on site if you need those as well 😊
-TRW Crystal
@@TheRhinestoneWorld could the vinyl shield also be used to protect a waterslide on say a wine glass?
I'm sorry, I just saw this comment! Sometimes they get buried fast. Yes, assuming the surface is clean, do not touch the shield (use transfer tape), and be sure to account for the curve of the glass. You may need to warp your design so there's no edges that crinkle on the taper.
-TRW Crystal
why cant you put the shield on the vinyl first before the cut?
Think of Vinyl Shield like an actual shield. You want it cut in an offset to fully encase what it's protecting. If the edges are flush then you've only layered vinyl :-)
-TRW Crystal
Hi is it uv to ?
Do you mean does the Vinyl Shield have uv protection?
Very minimal, but adhesive vinyl will generally take a long time to fade anyway. Vinyl Shield is to protect delicate designs, and opals from scratching.
-TRW Crystal
Can i use this over a sticker? I make snowglobe tumblers and those are on thick plastic tumblers so i cannot epoxy them and everything else i have tried still makes the image bleed eventually...or fade or smudge. Its a round customized image will cutting out a to size circleml over it protect it feom the smudging and wearing the color off? Peeling also eventually the sides started to peel up after a few hand washes 🥲
We use Vinyl Shield on many types of items, just like the helmet he demonstrated in the video. The ink on the decal looks as brand new as the day he applied it.
With Vinyl Shield, you want to overcut to fully encase the decal you're protecting. The edges, everything, do not cut it flush, water etc will creep into the exposed edges.
Next, the longer the shield sits after applied and the air bubbles are worked out, the stronger it sticks. It needs a touch of time, and heating gently with a hair dryer works as well to get that initial bond.
Do not make decals larger than they can accommodate on a tapered, curved surface without warping to size as this encourages weak edges and bubbling on just about any vinyl. So size properly is needed.
Lastly, as with any decal, wipe down your cup with rubbing alcohol or wash with blue dawn soap and dry really well. Then do not touch it, finger oils are the enemy. Oil will remove or weaken adhesive on any decal or sticker.
So, yes, it will protect your ink if all used properly. Give it 2 days or so and let the adhesive strengthen before attempting to hand wash :-)
We're here if you have more questions!
-TRW Crystal
Should the vinyl shield be bigger than the actual design?
Yes it should, and this video will show you a close up example for how it should look: ruclips.net/video/XpgabjPsVZE/видео.html
-TRW Erika
Can I purchase this in a store local to me? I need to hunt some down today so I can make teacher mugs. School is out tomorrow. 😳
We're not sure where your area is, but we have a storefront in Bradenton, FL
🙂
-TRW Crystal
Can you buy the vinyl shield at your store front in Bradenton?
Hi there! We'd be excited to meet you! Storefront is limited on materials. If you'd like to pick up an order locally, please place the order online 3 hours ahead of time to allow our Warehouse Crew time to pull your order and get it delivered to the storefront. We look forward to serving you!
---- We go live every Monday 8pmEST using our various award winning materials! Hope to see you at the next one, if we get enough viewers during the live, we're GIVING AWAY ANOTHER Silhouette Cameo! To enter: Subscribe to the channel and click the chat button to talk with us, that's all! -TRW Crystal
@@TheRhinestoneWorld ok thank you! I was excited to discover you guys are soo close to me! I’ll definitely try to be at the live on Monday!
Hope you had a blast! (At both!) Lol
-TRW Crystal
Do you sell in South Africa
We ship world wide! We cannot ship chemicals (like our Magic Vinyl Remover), or equipment.
-TRW Crystal
******Did you know?
~We're live EVERY Monday night at 8pmEST on our RUclips channel!
~~We teach how to use our products, have some pretty awesome GIVEAWAYS (Even Cameos!), and if you hit subscribe (FREE!), it will open up the chat option during the live.
~~~You can hang out, ask questions and have fun as we go!
I am already subscribed wil go through your website and see what I can order, I have cameo but would really like to try your products
Awesome!! We're here to help if you have questions along the way. Be sure to check out the homepage at TheRhinestoneWorld.com, there's a thumbnail there that contains free svg's (and a font)!
-TRW Crystal
Can anyone recommend a seller for these tumblers from alibaba please. Thanks ❤
Wouldn’t know about Alibaba, but Matt recommends Save-a-Cup for the Maars Skinny Tumblers and Skinny Steel Tumblers.
I am not sure about Alibaba, but Save-a-Cup is a great place for tumblers!
-TRW Abby
Ill check thanks❤
I love this! But my million dollar question is.. do you ship to mexico? 🤭
We do ship material, just not equipment! We are still working on that😊
-TRW Mireya
Came here from tiktok to win!!
Yess that's the spirit! Good luck!🥰️
-TRW Mireya
Any idea why the captions are only available in Japanese? I need them in English. LOL
That's so odd! We checked and on our end, it shows English for everything, but when we click "watch on RUclips", it shows us captions are auto generated in Japanese, too....? Maybe RUclips is doing some kind of update--when Facebook does their random updates, it causes temporary issues for us on FB and Instagram.
If you have any questions about ColorSpark Vinyl Shield, we're available to help you! :) And you can always email info@therhinestoneworld.com for assistance, too. Thanks! -TRW Pilar
You have a typo in the title you = yours ;) You can delete this comment too! Thought you'd want to know.
Thanks, Heather!
- TRW Haley