Great video - thanks! I've made similar tool boxes with my kids, and you've given me some great ideas for the next ones. One suggestion: I used thin plywood for the long sides - 5mm or 6mm (I forget which). I glued a 1" strip along the top of each side, on the outside, to double the thickness just at the top. It has proved to be plenty durable, and saves quite a bit of weight and heft.
What an amazing tool box build Eric! Every time I watch your videos I always get the urge to have to build something! Nice work as usual............. :)
Padrisimo!!!!!, muy útil, excelentemente explicado para su construcción, que opina usted de colocarle ruedas? se vale? mil gracias por compartir tan estupenda idea.
the dowel material you filled the holes in had a dark line through the center that looked like they were screws... it looks cool.. I had to look twice :)
It's nice looking and seems sturdy, but I have a couple of questions: 1. Why dowel-fill the screw holes? Couldn't you just leave the screws? 2. If exposed screw heads are the reason for #1, then why leave an exposed head on the handle? 3. If you're demoing a simple joint, and then build an accessory for the box using a $1000 domino joiner, is it still simple? :D Anyway, it's a great build, and really versatile... it's hard to beat a plywood/pine box for tool storage. I'd throw a quick coat of polyurethane or something on top of it to protect from water damage and such. Thanks!
@JFG Axeworks Thanks! The screws were only meant to be used as clamping during glue-up. I removed them and reinforced with dowels. It was a personal choice to use dowels. You can definitely just leave the screws or even use brass screws for a nicer look. The top handle uses a long bolt head screw, so that it is technically removable. As for the domino joints, I have the machine so i used it for the tool tray. You can use pocket screws or glue and brad nails will work fine. I will probably add a coat of poly at some point.
@Eric B. Davenport Thanks! Yes, the dimensions for this toolbox is 24 inches long, 10 inches wide, 9 inches tall on the sides and the ends are 12 inches tall (tapered 45° ). I used 1 inch dowel for the handle at the top. If you want a little more space for the tool tray, you can make your ends an inch or two taller - but may need to adjust the taper angle a bit. The tool tray is 8 1/2 inches wide X 21 3/8 inches long and 2 3/8 inches tall. The oak side tabs are 1 1/4 inches wide X 20 inches long X 3/8 inches thick. The corners/ legs are 10 inches tall, 1 1/4 inches wide and 3/4 inches thick. The side handles are the same material as the legs but tapered 22° on either end and are 10 inches wide.
my grandfather made me a similar toolbox when I was a kid, over 50 years ago. It's still in my shop :)
This is amazing content and helping build my confidence with woodworking. Thank you.
Great video - thanks!
I've made similar tool boxes with my kids, and you've given me some great ideas for the next ones.
One suggestion: I used thin plywood for the long sides - 5mm or 6mm (I forget which). I glued a 1" strip along the top of each side, on the outside, to double the thickness just at the top. It has proved to be plenty durable, and saves quite a bit of weight and heft.
Wowsa! Simple, effective and affordable. Please keep these coming.
What an amazing tool box build Eric! Every time I watch your videos I always get the urge to have to build something! Nice work as usual............. :)
Thanks Steve! Glad to inspire 🙂
Fantastic tutorial, just made my first version of your design. Thanks for the guidance.
@Ian Pearse Thanks! These are fun to make. I use mine all the time - more than any of my store bought boxes. Cheers🙂🍺
Nice work, looks cool.Thanks!
I liked it very much, thanks a lot for sharing.
Fabulous piece of work!!! Kudos!!!
nice toolbox - enjoyed the video
Thanks @John Bredemere! Cheers 🙂🍺
Eric that’s awesome.
As always, great video and easy to follow!! Thank you!!
@Christy Steinman Thanks! Cheers 🙂🍺
Padrisimo!!!!!, muy útil, excelentemente explicado para su construcción, que opina usted de colocarle ruedas? se vale?
mil gracias por compartir tan estupenda idea.
simple but pretty handy. :-)
That was a great tutorial. I like discovering new joinery, especially when it doesn't require mad skills with hand tools. Subbed.
Nice work,what is the different coloured line I can see on the dowels please?
Thanks Tony! That's just the natural grain pattern in the dowel. It wasn't intentional but I like the effect.
the dowel material you filled the holes in had a dark line through the center that looked like they were screws... it looks cool.. I had to look twice :)
Ahhh yes... Carpentry joinery for the win
Does anyone know where to get a flat tooth grind saw blade
The strongest joints are in Amsterdam. Cool tool box though.
It's nice looking and seems sturdy, but I have a couple of questions:
1. Why dowel-fill the screw holes? Couldn't you just leave the screws?
2. If exposed screw heads are the reason for #1, then why leave an exposed head on the handle?
3. If you're demoing a simple joint, and then build an accessory for the box using a $1000 domino joiner, is it still simple? :D
Anyway, it's a great build, and really versatile... it's hard to beat a plywood/pine box for tool storage. I'd throw a quick coat of polyurethane or something on top of it to protect from water damage and such. Thanks!
@JFG Axeworks Thanks! The screws were only meant to be used as clamping during glue-up. I removed them and reinforced with dowels. It was a personal choice to use dowels. You can definitely just leave the screws or even use brass screws for a nicer look. The top handle uses a long bolt head screw, so that it is technically removable. As for the domino joints, I have the machine so i used it for the tool tray. You can use pocket screws or glue and brad nails will work fine. I will probably add a coat of poly at some point.
Nice music
Would it be possible to get the measurements for this beautiful project?
@Eric B. Davenport Thanks! Yes, the dimensions for this toolbox is 24 inches long, 10 inches wide, 9 inches tall on the sides and the ends are 12 inches tall (tapered 45° ). I used 1 inch dowel for the handle at the top. If you want a little more space for the tool tray, you can make your ends an inch or two taller - but may need to adjust the taper angle a bit. The tool tray is 8 1/2 inches wide X 21 3/8 inches long and 2 3/8 inches tall. The oak side tabs are 1 1/4 inches wide X 20 inches long X 3/8 inches thick. The corners/ legs are 10 inches tall, 1 1/4 inches wide and 3/4 inches thick. The side handles are the same material as the legs but tapered 22° on either end and are 10 inches wide.