They look really strong rock sliders! Most on the market are just cosmetic things, I do find the powder coating on these bolt on bits very quickly peels off, once the water gets under the surface they are doomed to fail, but these look like they are a lot more durable, they are a real asset in supermarket car parks, where people parked next to you fling their doors open and dent your aluminium door panels, now they get the dents ! Well done, Chris B.
Really pleased to see this Video ever since the day you bought this Rover , I had been hoping to have looked to see what damage age do to these Cars ,Incase I sold my 110 ,but sadly due to health ,I went the Volvo route . -Check Volvo in the Mud ! .
Re that tread tape...it will be awful trying to keep it clean with mud getting all over it. Would a strip of self adhesive lightly ribbed rubber/vinyl be better? Just a thought as trying to wash that tape will be hard work. I think young Gary will have to find something else to put in the kit!😀😀😀
Would Love to see a video on how you guys jack the car up in differnt configs i.e. one side with 2 axel stands. the whole car up on 4 axel stands, as always nervous as hell when I do it...any chance?
there is a fabricated bracket just a bit aft of the front wheel, use a hydraulic jack there to raise the whole car/ ALWAYS put timber between jack and chassis, never steel on steel, it stops slipping
@@lujbav From time to time access to certain geographical area IP's are blocked if the firewall detects high levels of DOS attacks - these can change depending on the frequency of these attacks. Sorry if this has restricted your access to our products !
Always love watching you guys work. You show how it's done in the real world - exactly as someone would do it on their drive, no bullshit, warts 'n' all. Unlike the videos where everything goes perfectly, where any of the offering up etc has already been done and the job is done perfectly from start to finish without showing any pitfalls you'd come across in the real world. Keep it up guys ! Oh, and get some of these rock sliders made for the Freelander 2 !
We now these in stock on our website www.powerfuluk.com/vehicles/land-rover/discovery-3/exterior/land-rover-discovery-3-4-off-road-rock-slider-kit.html
They look like Britpart sliders. Mine last 6 months before all the powder coat came off. Do a raptor coat on them or better yet Line-X them before install.
Yet again another great video Lads👍 everyone needs a Garry for the heavy lifting.. Your Videos are not unlike What wheeler Dealers used to be like before they sold there soul to the devil.. keep up the great work Lads love it .
Hey! I have a question regarding the expedition roof rack on this LR .. is it possible to fit the same OEM rack on extended roof rails?! I know it's pretty late .. just trying to find some info before making a purchase! Thank you .. GREAT videos and content!
The underneath of that disco looks like tetanus shot. Might want to treat that rust instead of worrying about rock sliders. Hate to see that rig rust away!
I spent weeks last year watching all your videos on the new Defender ready for my P300 110 delivery. Unfortunatly, Land Rover have cancelled my order so I decided a D4 for a bit would be fun instead. Look where RUclips has brought me again..... Thank you!
Sorry to hear Land Rover have cancelled your order - these are mad times ! The D4 is a future classic - last chassis built Land Rover... we are making new products for our project D4 .. including some Defender inspired parts... so we have your back ...
Those times when you could film without a face mask! This is some proper 18kg Offroad stuff! Thanks for clarifying that "normal side steps" are pointless for Offroading. With this one, there is no loss in ground clearance.
@@L663 Hey when will the left side facelift evoque tailights be back in stock? Just bought the right one with letter and kit and front drl. Wish you had both so I didn't have to pay $60 twice to U.S.
@@L663 thanks, as you do so many products on so many vehicles, could you do a video per model updating them and rating degree of difficulty / special tools reqd? I know you have done something like this before, but worth updating?
The price increased and they are so heavy the couriers dont like them - we do have a pair to list in clearance that have some cosmetic damage ( they came on the box during transport ) so drop the office an email and they will sort you out with a good price !
They look really strong rock sliders! Most on the market are just cosmetic things, I do find the powder coating on these bolt on bits very quickly peels off, once the water gets under the surface they are doomed to fail, but these look like they are a lot more durable, they are a real asset in supermarket car parks, where people parked next to you fling their doors open and dent your aluminium door panels, now they get the dents ! Well done, Chris B.
Really pleased to see this Video ever since the day you bought this Rover , I had been hoping to have looked to see what damage age do to these Cars ,Incase I sold my 110 ,but sadly due to health ,I went the Volvo route . -Check Volvo in the Mud ! .
Super video. You should do more off roady stuff ;)
Re that tread tape...it will be awful trying to keep it clean with mud getting all over it. Would a strip of self adhesive lightly ribbed rubber/vinyl be better? Just a thought as trying to wash that tape will be hard work. I think young Gary will have to find something else to put in the kit!😀😀😀
Would Love to see a video on how you guys jack the car up in differnt configs i.e. one side with 2 axel stands. the whole car up on 4 axel stands, as always nervous as hell when I do it...any chance?
there is a fabricated bracket just a bit aft of the front wheel, use a hydraulic jack there to raise the whole car/ ALWAYS put timber between jack and chassis, never steel on steel, it stops slipping
Block reason:Access from your Country was disabled by the administrator.
İ cannot visit your website and get this above alert what is the case of blocking Turkiye?
@@lujbav From time to time access to certain geographical area IP's are blocked if the firewall detects high levels of DOS attacks - these can change depending on the frequency of these attacks. Sorry if this has restricted your access to our products !
@@L663 thanks for your promt reply and interest
Always love watching you guys work. You show how it's done in the real world - exactly as someone would do it on their drive, no bullshit, warts 'n' all. Unlike the videos where everything goes perfectly, where any of the offering up etc has already been done and the job is done perfectly from start to finish without showing any pitfalls you'd come across in the real world. Keep it up guys !
Oh, and get some of these rock sliders made for the Freelander 2 !
We now these in stock on our website
www.powerfuluk.com/vehicles/land-rover/discovery-3/exterior/land-rover-discovery-3-4-off-road-rock-slider-kit.html
Any point in upgrading to M10 bolts. Youd need to put riv nuts in tot the seal. Thoose bolts dont look much cop?
They look like Britpart sliders. Mine last 6 months before all the powder coat came off. Do a raptor coat on them or better yet Line-X them before install.
Hi there sorry for the late comment but can I ask what brand of rock sliders did you use in this video, many thanks
Do they also fit the Range Rover Sport L320?
Strewth , the amount the plastic covers pins the mud to the body .
Great videos that your company produces makes all the jobs so much more strait forward for home mechanics, long may you continue! cheers
Yet again another great video Lads👍 everyone needs a Garry for the heavy lifting.. Your Videos are not unlike What wheeler Dealers used to be like before they sold there soul to the devil.. keep up the great work Lads love it .
Hey! I have a question regarding the expedition roof rack on this LR .. is it possible to fit the same OEM rack on extended roof rails?! I know it's pretty late .. just trying to find some info before making a purchase!
Thank you .. GREAT videos and content!
The underneath of that disco looks like tetanus shot. Might want to treat that rust instead of worrying about rock sliders. Hate to see that rig rust away!
Do you have to do a primer paint and sand? Or is this because of the presence of mud and the SUVs previous use?
The amount of dirt in there that’s hilarious. Great video guys!
I spent weeks last year watching all your videos on the new Defender ready for my P300 110 delivery.
Unfortunatly, Land Rover have cancelled my order so I decided a D4 for a bit would be fun instead.
Look where RUclips has brought me again..... Thank you!
Sorry to hear Land Rover have cancelled your order - these are mad times !
The D4 is a future classic - last chassis built Land Rover... we are making new products for our project D4 .. including some Defender inspired parts... so we have your back ...
Hi 👋 this looks nice 👍 and strong 💪 better than the old one ☝️ good job 👏
Those times when you could film without a face mask! This is some proper 18kg Offroad stuff! Thanks for clarifying that "normal side steps" are pointless for Offroading. With this one, there is no loss in ground clearance.
When the mask wearing is over I will be happy too... i think i have eaten 1Kg of fluff !
How much is the set?
Can you tell me what are the tyres that you have on the Disco 3 ?
Can You send your contact’s
Great video, will these bars take the weight of a hi lift jack?
In theory yes they will - these are very very solid !
Just look on your website and you don’t supply these
Britpart rock sliders www.britpart.com/parts/exterior-protection/side-protection/rock-sliders/da7533
I love all your videos. especially you do not use any lift :-)
Did you see how close the disco is to the roof of the workshop !
Any chance of getting an Evoke as a project car?
Well miles we have one....will dig it out next week !
@@L663 Hey when will the left side facelift evoque tailights be back in stock? Just bought the right one with letter and kit and front drl. Wish you had both so I didn't have to pay $60 twice to U.S.
They look really good, high quality too
They are really really heavy !
Would these fit a 2005 RRS?
Someone else has also asked this question - i will take the sills off the red car and take a look... may be a week till i get around to it !
@@L663 thanks, as you do so many products on so many vehicles, could you do a video per model updating them and rating degree of difficulty / special tools reqd? I know you have done something like this before, but worth updating?
Do you still offer these bars?
The price increased and they are so heavy the couriers dont like them - we do have a pair to list in clearance that have some cosmetic damage ( they came on the box during transport ) so drop the office an email and they will sort you out with a good price !
Search LR3S328 on eBay
@@sharonsyrupycupcakesreed583 thanks I tried ebay couldn't find it. Maybe different numbers. I appreciate the help.
staggered at the rust , dunno how Garry works with you, you talk to him as though he's stupid
GARY'S THE MAN!