Это видео недоступно.
Сожалеем об этом.
How to replace a headlight bulb 2006 Honda CRV
HTML-код
- Опубликовано: 7 авг 2024
- Here are some of the tools that jimthecarguy uses
www.amazon.com/shop/jimthecarguy
Replacing a headlight bulb is very easy once you see it done.In this video I will show you how to replace the headlight bulb.
Disclaimer:
Due to factors beyond the control of jimthecarguy, it cannot guarantee
against unauthorized modifications of this information,. jimthecarguy
assumes no liability for property damage or injury incurred as a result
of any of the information contained in this video. jimthecarguy
recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, chemicals, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of jimthecarguy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not jimthecarguy.
5 years later and you are still helping people. Many thanks you helped a lot.
My dude keeping wallets everywhere safe , thank you 🙏💯
You bet
THANK YOU!!!! My three year old daughter and I changed the headlights today. Your video was so helpful! Really glad I know how to do this now
FYI the bulb is an H1 available in 4 varieties of color/brightness
You’re the best for this
Well done! Thanks for taking the time to show how the spring retainer-clip functions. It has caused me much grief in the past, but now that I know how it works replacing bulb should be easy!
KaBoomer thanks for watching I'm happy to help
The most difficult part was getting the rubber gasket off - man, it had been on there a while...using a mirror really helped me see what I was working with (especially the clip) and the rest went smooth as butter. This here old lady changed the bulb herself with the help of your superb video. Many, many thanks! 🤗
I’ve used this video 3 times in the past 2 years and want to say thank you for the easy and very detailed instructions.
Thank you so so
much for your directions, they were very detailed, and you even took the time to use a mirror to show what is not easily seen. It made replacing my bulb so easy. It took me less than five minutes to do!
I wanted to say THANK YOU! After watching your video, I was able to perform this on my own in under 5minutes! Which was even better considering it is 15 degrees outside! Thank you so much! I’m thinking 5months ago when I had the same issue. My driver side headlight went out. A previous video I watched stated I had to detach the whole light just to re-install the headlight! So I went to a local auto shop and they charged me $40 just for installation and I didn’t think anything of it. Well I think they touched the bulb because my bulb didn’t even last a whole year! So after watching your video, I realized that with small stuff with the CRV I might just be lucky and manage to do it all on my own. The CRV alone was new for me since I came from a Mitsubishi Lancer. I would love to see how you do the cabin filter!? I noticed I had some whistling in a vent on passenger side. Help is needed! Thanks in advance!!! :)
Thank you. We actually had the challenge with this in a 05 CR-V EX. Your instruction are quite helpful. We will probably get one of the mirror thing, just because it seemed helpful to see what was going on inside.
Got my new headlight bulb installed with a minimum of fuss and bother.
Thanks very much Jim.
Just watched this and I changed my light in less than 5 minutes. So helpful. Thanks.
Thank you for watching . I'm happy to help.
Thank you!!!!! Worked perfectly thanks to your detailed explanation and video. Nice to not have to pay a mechanic to do this simple maintenance item. 😁
Thanks for the mirror enhanced shot of the retaining clip...the hardest part to get back in place.
Great instructions as always. The mirror was a perfect touch.
Great video and easy to follow i had the bulb changed in 5 minuets. ps.its great to listen to a video without the guy shouting his way through the instructions. Thanks from Jim in Glasgow Scotland take and stay safe.
Glad it helped. I know what channel you are talking about.Hahaha
I've had to replace my own bulbs twice now and this is the homie I go to. Thank you for being so informative! I'm not scared to do it myself anymore ☺️🖤
Ok😢🎉🎉 thanks 😢😂
🎉
❤😊
ok
ok
W
ok
Thank you for starting and staying on point. You are a good teacher.
Thanks so much. The recommendation to slightly pinch the connection was very helpful as was the mirror to show the latch catch. Much appreciated by daughter and me.
JIm, thank you so much! You saved me by enabling me to do this on my own. My old car is essential for me and my dear old Mom.
Glad to help
So useful. Mine seems to burn out a bulb every two months or so, making this super useful
I’ve used this at least 4 times in the last few years - very much appreciated each and every time!
Great to hear!
across all of youtube your video was the BEST . thank you sir for the very well informing information .
Nice job Jim. Next is headlight restoration, they’re looking a little cloudy.
Bug spray and a cloth.
Thank you so much! I tried changing the light and run into trouble. Watch your video and got it done!
The mirror showing how the clip hooks was the part I needed to see. Thank you so much!!!!
You are so welcome!
Thank you kindly for instructing me on how to replace my bulb I have replaced my bulb on my my Ford and my Chevy this is the first time I've had a Honda I have never seen a metal pin that holds in the bulb quite interesting thank you kindly for helping again
Thank you! I’m going to attempt this myself since my husband has been saying he’ll do it for a month and must have forgotten at this point. 😅
Thank you so much! I was able to change the bulb myself, which I purchased for only $6 at a local general retail store. The auto parts store wanted to sell me the same bulb, same make (Sylvania) for $20. Beware!
Thanks I appreciate your video. Ive always had older chevey/GM's. I thought this would be more work but it's actually quicker than I thought. Thanks Jim!
Glad it helped
Thank you for the video, it was very detailed. Just what anyone would need for a job well done!
Hope you are doing well Jim. Thanks so much for this50. I'll be doing this during a 40 degree warm day here in frigid Chicago. I'm trying LED's that are supposed to be plug & play and 50,000 hour life. My daughter's CRV eats the expensive halogen ones - last only a year or so.
Thank you for showing me something the guy at Autozone was getting wrong. Thank goodness he said he couldn’t do it for me. He was going to replace the wrong bulb. Had my high-beam unplugged before he gave up.
Jim, once again your great video and instructions helped once more!
Thank you,esp'ly for showing the clip in the mirror. Very helpful!
Excellent step by step process…thank you so much….so helpful
Extremely helpful!! Thank you for posting your video.
Thank you! The mirror part was very helpful.
Thank you! This was very helpful.
Thanks for the video. I wouldn't have known about the spring thing otherwise. Of course the rubber boot fell off into the depths of the compartment when I was changing the bulb. I'm going to drive around my parking lot and see if it falls out, else off to Amazon for replacement.
Thanks a lot. had no idea on my 06 crv. Subscribed
Very helpful video - thanks for sharing 🙌🙌🙌
The mirror for reinstallation is the best way to me. Thanks!
Thanks man. Very simple and helpful. I was in and out with both lights in about five minutes
Hi Jim, thank you for this informative video! You make it really simple and so that I can now do this myself instead of relying on my dad.
I do have a question - which part are the tabs I would need to tighten since my bulb cannot plug in since it is loose? I'm having trouble figuring out how to get the bulb to fit in the socket. Thanks in advance!
it took me several hours to be able to put the clip back into place..thanks for the mirror technique i had to reorient using the mirror on how the clip returns to its proper place!
Glad it helped!
Thank you Jim! Exactly what I needed
Thank you jimthecarguy! Very clear and concise!
Glad it was helpful!
Excellent video guide ! Explained EVERYTHING I needed to know. Thanks Bunches
Glad it was helpful!
Thanks Jim. Big help
thanks a bunch for the effort to show what needs to be done. Thank you !
Glad to help
Omg thank you so much for the clear tutorial!,
Great video!! :) Ty for making these
After watching this, I am going to change it myself. Thank you!
Glad I could help! Just remember not to touch the glass part of the bulb.
@@jimthecarguy , I was a success!!! But I did accidently change the bright light on accident, so I just changed both! Thank you so much for sharing this with us.
Super helpful. Thank you very much
Thank you very much. If you hadn't used the mirror, I'd still be fiddlin' with the clip!
This is so helpful, thanks for sharing!
Glad it was helpful!
Very helpful. Thank you!
Nice tip!: If you touch the glass, you'll leave your oil on it and it can burn out faster.
That's likely why this burnt out so soon.
Thanks Jim!!
Thanks man very helpful
I just changed my first lightbulb and I'm 46. If it wasn't for that mirror I might have been stuck 😭 but thank you so much for this video 😊
Glad I could help!
Perfect Explanation ... Need help i have Honda HR-V Year 2000.. When i remove the both side bulb i didn't notice the side that you mention bulb angle.. please help me to find out correct position to put back
Thanks Jim, wish I had of seen this yesterday before my car went into for yearly registration, I had mine in upside down, they worked but lit badly and didn't pass, I had to to back and got charged again. bad mistake!!!
Thank you for this, sir.
Well explained. Good job.
Thanks!
That clip proves to me that the engineer that invented that must must have been the last in his class, and the approval of the clip gets the du#$@ s#_@ss award.
You made an absolute pig of a job with that bloody clip much easier. Thanks!
Glad it helped
Good job buddy thanks l’ll be working on exact same thing bolb
Good video friend! You went out of your way to make sure we could see important details. Much appreciated.
I'm happy to help. Thanks for watching. Don't forget to hit the bell for notifications when a new video is posted
Thanks for the video! Very helpful
Glad it was helpful!
Thank you so much. I look at your RUclips, I changed light bulb by my self, I am 59 female. Thank you again.
Thany ou so much for your help ill' well God bless you
today I change bulbs！ thanks
you are the best
Thanks Jim, well explained! Have you considered Led bulbs?
So good, thank you!
Thankyou very much sr
thanks Jim!
Thanks man!
Thanks man
Thank you very helpful
Glad it helped
I go through a lot of bulbs I try not to touch the globe but its hard since the small japanese access profile makes it tough. I get the H1 bulbs at Wallmart the brighter more expensive bulbs don't necessairy last longer they are just brighter and more dear. Take some gloves from the emergency eye cleaning unit at wallmart and wear them when replacing the bulb. The little Stanley white sub connector will get loose and this may cause a poor connection so you have to bend the little u prongs in to make a tighter fit.Use a nail or a needle nose pliers. Also I found that the bulb may short out the circuit and this will require you to change the fuse on number 15 for the driver side and the number 17 for the passenger side. These headlights have their own dedicated fuse for each side. The fuse box is on the drive side just above the light assemble near the left fender.
Thank you 🙏
Perfect video. :D
Thanks for the helpful video! Is the low beam bulb the same as the high beam bulb?
Useful share thanks.
Hi, I just successfully changed the headlight bulb according to your instructions but I have one point to add. The connecter has 3 ways to plug in and after I changed the bulb it didn't work so I flipped the connecter over and it still didn't work. I thought there would only be 2 possible ways to plug it in. I then drove to my garage and my mechanic casually flipped the connecter again to the third possibility and the headlight came on. You may want to remind people of this. Keep the orientation of the plug in mind.
What are the powered on top corner lights called, currently trying to find a new socket for one and I don't know the name of it.
Very helpful, thanks....
Glad it was helpful!
Thank you
Very helpful thank you
You're welcome!
You made that look easy. That little clip a pure nightmare if you got large hands. Whatever engineer designed that system needs to go back to school. Jesus
Hi, I want to replace a Sidelight bulb passanger side on 04 Honda crv. should I have to take off all the frame and get the all lamp frame off? can you make a video of that please . Thank you
Worked like a charm. Thank you for the video!!!! :)
Thanks
Had to use this both times I did it
I think I touched the filament last time and it burned out fast
What kind of bulb is needed for this model car?
On my Ctd-i Diesel 2006, the dipped beam remains on with the high beam giving great lighting but the dipped beam bulbs only last 5 years or less as a result. The right hand dipped beam bulb (RHDrive vehicle) is a real pig to fit unless the nearby fluid reservoir is loosened first. Even so, scraped knuckles are inevitable. I now have all four bulbs and the two 5w side/position light bulbs replaced every 3rd annual service as the bulbs slowly get dimmer with use.
I replaced the side lights ("position lights") with 1w LED. A major upgrade for less than $3. You CANNOT legally or practically replace the headlight bulbs with LEDs.
Thx Jim.
Thank you!