How to Fix P0411 Engine Code in 3 Minutes [2 DIY Methods / Only $9.68]

Поделиться
HTML-код
  • Опубликовано: 24 июл 2024
  • =============================
    Claim your FREE engine code eraser
    👉 free.nonda.co 👈
    =============================
    Engine Code P0411 Saving Repair Parts:
    Air Injection Pump: amzn.to/3vIUGFv
    Multimeter: amzn.to/3tHIlQ2
    O2 Sensor: amzn.to/3scToQE
    This video shows you How to Fix Engine Code P0411 in the easiest, quickest, and cheapest way. 2 practical solutions to fix the P0411 error code. 2 simple DIY solutions to repair P0411.
    Engine Code P0411: Secondary Air Injection System Incorrect Flow Detected
    It indicates that the ECU has detected the flow from the secondary air injection system to be out-of-specification.
    How to replace the air injection pump. How to replace the Oxygen Sensor. O2 Sensor. How to inspect the air injection pump. How to use a multimeter to check for resistance ohm. Tips and tricks for testing and replacing the Air Injection Pump in your car and fixing code P0411. Tips and tricks for replacing The O2 Sensor in your car and fixing code P0411.
    Fix Engine Code P0411 Easy DIY Method A | The Air Injection Pump
    1. Remove the used Pump
    2. Inspect the Pump Condition
    3. Reinstall a new Pump
    Fix Engine Code P0411 Easy DIY Method B | The Oxygen Sensor
    1. Inspect the Oxygen Sensor
    2. Replace the Oxygen Sensor
    Related Codes and Their Repairing Methods:
    P0410: • How to Fix P0410 Engin...
    P0411: • How to Fix P0411 Engin...
    P0412: • How to Fix P0412 Engin...
    P0413: • How to Fix P0413 Engin...
    P0414: • How to Fix P0414 Engin...
    P0415: • How to Fix P0415 Engin...
    P0416: • How to Fix P0416 Engin...
    P0417: • How to Fix P0417 Engin...
    P0418: • How to Fix P0418 Engin...
    P0419: • How to Fix P0419 Engin...
    nonda Auto DIY Center is the biggest Auto DIY Video Center in the World. These videos are dedicated to helping people fix error codes by themselves with minimum expenses.
    ** Disclaimer for nonda **
    Please read carefully the terms and conditions of nonda below. IF YOU DON’T AGREE WITH THESE TERMS, PLEASE STOP WATCHING THE VIDEOS IMMEDIATELY. By continuing to watch the videos provided by nonda, you hereby consent to the terms and conditions (including disclaimer) below.
    All contents provided in the videos are based on publicly available information and resources, and nonda has not independently verified the effectiveness and safety of the contents. The videos are provided as a courtesy for your reference only, and nonda is not making any representation or warranty regarding the accuracy, effectiveness, or safety of the information or advice presented in the videos. nonda hereby expressly disclaim any responsibility or liability for any accident, loss, or damage caused by your decision to follow any advice given in the videos. The users are strongly encouraged to consult a licensed professional before taking any action on your vehicle.
    Auto mechanic problems can vary greatly among different makes and models, and nonda does not attempt to cover all makes and models. Any information provided regarding one particular make and/or model does not necessarily apply to any other make or model. The users should consult the owner’s manual or contact the manufacturer regarding the application of the information provided to their particular vehicle.
    nonda recommends safe practices when working on vehicles with tools and equipment seen, recommended, or suggested in the videos. The users should read the owner’s manual for these tools or equipment carefully before using such tools or equipment. nonda expressly disclaims any liability for any injury, damage, or loss that may result from improper use of these tools and equipment.
    The links contained in our channel may lead to external sites, which are provided for convenience only. Any information or statements that appear in these sites are not sponsored, endorsed, or otherwise approved by nonda, and nonda is not responsible for the availability of, or the content located on or through it.
    0:00 What is P0411
    0:38 Method A - The Air Injection Pump
    1:21 Method B -The Oxygen Sensor
    2:00 Claim a FREE Engine Code Eraser
  • Авто/МотоАвто/Мото

Комментарии • 38

  • @nondainc
    @nondainc  3 года назад +1

    Hi, I'm Steve, nonda's lead mechanic engineer.
    Feel free to leave your comments here if you have any mechanic questions, I will be glad to help you out!

    • @Legend-IAM
      @Legend-IAM 2 года назад

      Hello Steve, my daughter have a 2010 Pontiac G6 and codes are PO411
      P2432 she fails inspection because the check engine light is on

    • @moisesacevedo4382
      @moisesacevedo4382 6 месяцев назад +1

      HI Steve i own a 2015 Chevrolet Equinox my check engine light came on i checked the code it says P0411 I'm not familiar with the whole mechanic on vehicle on the dealer always trying to over charge or create something else with the vehicle can you help me out with this issue thanks..

    • @sodiumsoldier6366
      @sodiumsoldier6366 Месяц назад

      Are you serious? You say the air injection pump is wrapped around the serpentine belt? No it's not! You also say to inspect the pipe, while you're pointing to the wiring harness. Why would somebody trust this video if you don't even know what the components are for what we're talking about?

  • @mmike422
    @mmike422 9 месяцев назад +6

    For anyone having this problem I was having same problem after all the video's I tried hooking shop vac up to the hose that goes into breather box from secondary air motor suction hose and I reversed and blew air into it next day light is off been off all day

  • @user-bz9si5np5d
    @user-bz9si5np5d 9 месяцев назад

    I am having this code show up on my 2005 Ford Focus Zx3 2.0, i recently changed my spark plugs and changed the gasket myself after i did that my cbeck engine light came on

  • @saxgirlhornboy6458
    @saxgirlhornboy6458 Год назад

    I have been getting P0411 for about a month on my 2012 Chrysler T&C van. The CEL will stay off for a few days after reset, then comes on again while I'm driving (and the engine is warm).
    ??

    • @nondainc
      @nondainc  Год назад

      If this is the only code you're getting, please follow the tips/solutions provided in our video on how to fix P0411. Hope it helps!

  • @Robertscreations
    @Robertscreations 2 года назад +2

    Dealing with the same issue, pump is working on cold start I can hear it when I disconnect hose, changed the check valve 2x and inspected all hoses, still have p0411 on my 2.5 Malibu 2013

    • @nondainc
      @nondainc  2 года назад

      Hello, have you checked if there's an exhaust leak?

    • @Robertscreations
      @Robertscreations 2 года назад

      Yes I have checked, no leaks

    • @nondainc
      @nondainc  2 года назад

      Kindly make sure that the air pump harness has no open/short. Double-check the air pump circuit for poor electrical connection.

    • @Robertscreations
      @Robertscreations 2 года назад +1

      Yes I figured as much I already have new expansion plugs I'm going to clean ports out on Saturday when the weather warms up and hopefully solves the issue

  • @destinationdezz1588
    @destinationdezz1588 Год назад

    Thanks for the video! I had got the code P0411, P0013, & P0014. Once I replaced parts for 0013&0014 all I have left is the P0411 code. Do I need to let my car do a complete drive cycle before the code and my check engine light come off?

    • @nondainc
      @nondainc  Год назад

      Hello, as you are getting more than one error code, we suggest getting your vehicle visually checked by your local mechanic for further diagnosis.

    • @chuckychuck
      @chuckychuck 8 месяцев назад

      @@nondainc 👀👀👀👀

  • @4amhussle492
    @4amhussle492 2 года назад +3

    I have this code change the MAF sensor Secondary air injection pump , air pump converter air pump sensor. BROUGHT IT TO DEALER an they couldn't find a problem while they had it for two months. The only thing I have checked was the 02 sensor I really hope this is the problem because the vehicle has no serious issues except for this P0411 code that I've been dealing

    • @nondainc
      @nondainc  2 года назад

      Hello, please let us know your vehicle's year, make and model.

    • @anthonyjamear
      @anthonyjamear Год назад

      Same here did u ever find a solution???

    • @itsdizzleyall
      @itsdizzleyall Год назад

      Did you ever find the solution? I have a 2014 Impala 2.5L. I cleaned out the ports and replaced the plugs. Tool apart the secondary air check valve and tested that it still works. Air is coming from the pump on cold start up. You can see this by disconnect the hose going into the check valve and plenty of air is blowing. Maybe I need a new upstream 02 sensor?

  • @sodiumsoldier6366
    @sodiumsoldier6366 9 месяцев назад +2

    The air pump does not have a serpentine belt on it, they are electric, the pump pipe is not the pigtail, those two holes on the pump that you see in the video are where the pipe connects to and goes to the valve abd intake. I don't know to trust you if you don't even know what the pump is or how it works.

    • @chuckychuck
      @chuckychuck 8 месяцев назад

      👍👍I changed this air pump out 10 years ago it took a week for the engine light to turn off, these thieves today are making money off of these obd 2 scanners, they charging you 150 to 250.00 just to hook up their scanner, all these misleading videos are telling people to dismantle their throttle body just to clean it yup, another code thrower. you can clean that throttle body without tearing it apart. introduce Heet or sea foam to you car maintenance list.

  • @FooShiestyOG
    @FooShiestyOG Год назад

    Upstream or downstream o2 sensors?? This would be great information

    • @nondainc
      @nondainc  Год назад

      Hello, please provide us with your vehicle's year, make and model.

    • @Emmanuel-zr8cl
      @Emmanuel-zr8cl 9 месяцев назад

      Hello I have a PO411 code on 15 GMC terrain and can't pass the test only 43000 miles on it

    • @eagz2898
      @eagz2898 6 месяцев назад

      He shows the downstream but I don't think that can be a factor for air systems

  • @syfodias-jedimaster
    @syfodias-jedimaster Год назад

    What kinda damages on oxygen sensor?

    • @nondainc
      @nondainc  Год назад +1

      Since its location is in the exhaust stream, it can become contaminated. Also, if maintenance such as air filter and spark plug replacement isn't performed as intended , oxygen sensor can go bad quickly.

  • @joefhruska3386
    @joefhruska3386 2 месяца назад

    Replaced both, didn't work.

  • @RC_BASSBOY
    @RC_BASSBOY 3 года назад

    Wait so the 02 oxygen sensor can cause this code also ??

    • @nondainc
      @nondainc  3 года назад +1

      Yes. It is less common but in order to pinpoint the cause of the issue, possible parts affecting must be inspected.

    • @RC_BASSBOY
      @RC_BASSBOY 3 года назад +2

      @@nondainc I've replaced the Air Pump and the Valve Sensor cleaned out all the ports from carbon build up all air hoses are cleaned replaced with original GM products and I still get this P0411 code. Car is a 2011 Chevy Malibu LS 2.4l ecotec engine.

    • @RC_BASSBOY
      @RC_BASSBOY 3 года назад +8

      @@nondainc An Update : Well it wasn't anything but a lose air pump ground wire pump was still working but not as efficient because of the lose ground wire but at least everything is OEM new and ports cleaned don't have to worry about this check engine light anymore. You should mention about secondary air pump ground wire that will also trigger this code.

    • @nondainc
      @nondainc  3 года назад +3

      Thank you for sharing your experience, R/C.

    • @DownAndDirtyOffRoad
      @DownAndDirtyOffRoad 2 года назад +2

      @@RC_BASSBOY where was the loose ground located? Thanks. I replaced pump and valve because pump had water in it. But code came back.