Pipe Fitting - Finding Takeoffs for 90 & 45 Degree Fittings / Fitting Prefab Using A Laser
HTML-код
- Опубликовано: 10 июл 2024
- Have you thought about making a leap into the pipefitter trade or just got into this field but need some help with how to start pulling measurements? Well here is a video for you!
Авто/Мото
Dude, Bravo. I'm a pipe fitter and a pipe welder. I love how you explain everything 👏👏👏👏👏👏👏
Thank you for watching!
Just finished welding school and doing the pipefitting program, you’re an awesome teacher and the way you carry yourself and explain things and the confidence behind your knowledge I automatically knew you were a veteran, then you said 03XX from the Corps and it made sense, we can definitely sense and recognize a fellow Devil Dog lol. Don’t underestimate your grunts, they’re some of the smartest guys I know!
Thank you for watching!
Could you make more videos like these? I'm young but I learned a lot just from one video.. you're a good instructor.
You are one excellent teacher! Would love to gain the knowledge you have, keep videos coming. Thanks
Thank you for watching!!
I was searching for the connection with you and i found it at the end - military blood. Libe strong my brother.
I am doing this job from 2014 in Florida, I didn’t know nothing about this, but working hard, learning everything from each coworker I got it, nice video
Thank you for watching
Great video man!!! I’m a pipefitter out of Local 72 in Atlanta so keep up the good work brother.
Adam thank you for watching!!
Wow, can I just say you are a FANTASTIC instructor. Blown away, learned so much. Thank you kindly sir.
Thank you for those kinds words!!
Great video, Hand! You're a great instructor and I hope to see more of this content from you!
EXCELLENT VIDEO! Thank you very very much for the tutorial!
Dude, I fucking loved this video. Im an Electrician, and I like to check on pipe fitter videos so I can steal your trig formulas. It is applicable to bend electrical conduit. You explain this in a very understandable manner. Keep it up.
Dude awesome video, thanks for this man👍
Always looked at piping with amazement, very well explained
Enjoyed it
I'm glad you enjoyed it!
Amazingly thorough knowledge of your field and great delivery.
Thank you!
the best fitup video on youtube... Keep showing us how its done!
Awe man thanks you! 🤙
Hey Edgar, Great Video! Thank you for all the details.
Thank you for watching!!
Can we get more videos like this brother loved the video thank you!’
Great video, thanks.
Wish I could like it twice. Appriciate this informative video. Thank you.
Thank you for watching!!
Good video very helpful you explained it perfectly great job... We need more videos like this... Keep em coming that was awesome 👍👍
Thank you for watching!!
Good job buddy, I could see that you've already been around the block, these method's you just explained, is only learned and self Masterd in the field with trial and error....but once you've Masterd all the technical details, that's when life gets easier, at the end of the day, youve gained so many knowledge and 10 different methods depending on what tool is on hand, that you make your job look so easy to others.... EVERY thing you've just explained, is stuff you cannot learn of paper but only on job or in field work, like you've said there so many more ways to saddle in, but Myself personally use the best method on point were I find myself in the field, and which tools are on hand, weather I'm working on Hights or in Confined spaces,..... Keep up the good work buddy.... Lots of new comers would definitely learned a thing or two
Bro, Thank you so much!!!! Very helpful.
This is great for my students!! Thanks for all the info!!!
Thank you for watching!!
This was such a good video
Great video. Keep them coming
Thank you for watching
Awsome Video Sir, keep em coming 💯
Thank you for watching!
Cisneros muchas gracias por tu información, sigue subiendo más videos campeón, saludos de aquí de Houston.
This was really helpful for me , Thanks a lot !!!
Thank you for watching!
Very nice information
Best video ever!!! Subscribing immediately!!!!!💪🏿
Awesome thank you for watching!
Extraordinaria explocacion. Muchisimas gracias
Great info!!
Nice video buddy thank you for your service
Thank you for watching!!
First thank you for your military service second that was a great lesson on fitting pipe. I looked at the those chain vise grips and save them to my list
Great video..
Edgar many thanks, Ace video Dude 👍
Thank you for watching!
Great info man I'm a rig welder and have never gotten into pipe fittings but I know it's eventually gonna catch up to me. Your video was very informative and resourceful. Thank you.
Thanks for watching!
Man, I am a mobile welder and that pipe fitting has caught up to me. The pipes that I am working with are huge 24" to 53" You are right, it will catch up with you. I need to learn how to use this blue book.😢
We definitely need more videos like this!!!
Thank you for watching, i will start a mini series soon!!!
Do you have online course?
Loved the video i could have used info like this quite a few years ago jam up job bro
Thanks for watching Pablo!
Thought I recognized your voice from the innovative training videos, thanks for sharing all this info
Yeah buddy!!
Yeahhhhh bbbyy good stuff man!
Thank you for watching!
I’m late but wow great video your inspirational
Grate video 👍!
Love this book
Its definitely a life saver sometimes too!
HOLA EDGAR BUENOS DÍAS, GRACIAS A DIOS TE DESCUBRÍ ESTA MAÑANA Y YA RECIVI MIS PRIMERAS CLASES Y YA TIENES UN NUEVO SUSCRIPTOR GRACIAS Y ESTAREMOS ESPERANDO NUEVAS CLASES BENDICIONES , SALUDOS DE AQUÍ DE HOUSTON TX
GREAT VIDEO BROTHER !!!!! THANK YOU .
Thank you for watching!!!
Always Brother show how to fit ,or make pipe supports off a beam to pipe . Thanks 👍.
Excellent
Thank you!!
Good video.Thanks!
Thank you for watching!!!
Exelente video ,ojalá algún día te habientes uno en español !!! Saludos
Holy shit great video!
Thank you for watching!
amazing !!!
Thank you for watching!
Mas Claro que el agua!
Nice video
Thank you for watching!
Good information brother
Thank you Miguel!
I'm an experienced pipefitter and I knew all this, but boy I sure enjoyed every minute of your video, awesome job!!!
I'M HALF RULE & DIVISION METHOD ALL DAY‼️ 😅💪🏾👷🏾♂️
Hahah that's awesome, thank you for watching!
Jam up video 💪🏻
Thank you for watching!!
Convert the fraction into a decimal
5÷8= .625
4 x .625 = 2.5
Great video that’s exactly hot I would have done it 👍
Thank you for watching!!
Has más videos de pipefitter
Thanks man im very rusty
Im tryin to breakout as a fitter and came along this issue. Need to find out top part of the in degrees if the bottom cut is 22 degrees. Can u plz show me how to do this
Good video. There is a site i cannot find again you can input all data even for large pipe and print it out on your computer.
Thanks for watching!!
How çan I collect the Blue Book. And u r narration is excellent. Thanks
You can buy it on Amazon
I got the blue book, but I can't find that in mine at 2:09. I really like how in your book, it shows the fitting and then the various measurements for it. I ain't got any picture of fittings like that in mine. It definitely isn't on page 95.
The book that I'm using/ referencing is THE PIPEFITTERS BLUE BOOK by W.V. GRAVES
@@cisnerofam08 See I didn't know that there were two different books. One I got is also literraly a blue book, but is called pipe fabricators blue book. You ever use that book? Which one is the better of the two if you had to have one? Thanks
Snr donde consigo el libro de trazado de usted muy agradecido
Good video, however I noticed one thing. I would recommend NOT hammering the punch for finding the center, on an existing line. If it’s existing I always use a marker or soap stone.
great job guys! where we can buy blue book!
Amazon!! I have bought two of them so far and both were pretty good quality
Diameter + radio = take off
Where did you buy the pipe fitters blue book at ? I’m hesitant because I read that there are counterfeit copies sold of them blue book online.
Amazon!!! I have bought two of them so far from Amazon.
@@cisnerofam08 from what seller on Amazon? I was thinking of getting it from Austin Ross but he sell it from $37 plus shipping. $49 total.
@@kingkolt886 the seller is Anadorn LLC its $31 and a $4 delivery fee. They are out of Virginia. If you look they have the best reviews from people who bought from them. The book in the video was purchased from them.
@@cisnerofam08 so I’m trying to practice the branch and bell hole test. Is there any other books you recommend for these ? Or just the blue book?
Bennett sent me here.
Bennett from where? Thank you for watching!!!
@Edgar Cisneros he's the math wizard, the myth and the legend.
👏🏼👏🏼👏🏼👏🏼🇧🇷❤🇺🇸👊
How to gate this book
Buena colega , si hablas en castellano sería genial , usted es latino , hablé en castellano colega , muy buena explicación
What is the difference between the pipe fitter and pipe fabrication blue book?
There are several books out there in this field of work, so I can't really speak specifically on those. The one in here is The Pipe Fitters Blue Book by W.V. Graves.
I just did the 5/8 method for a 3 inch pipe and it worked out. What gives?
The ⁵/⁸ method is used to find the take off of a butt weld 45° fitting. This method starts to work from 4" and bigger. The take off for a 3" 45° BW elbow is 2". If you use this method 5/8 X 3 = 1 7/8" which is incorrect.
hey bro how to get the chain strap or you diy?
So the chain strap or aka chain grips and chain extension was bought off of Amazon.
THE NAME OF THE COMPANY THAT MAKES THAT "CHAIN GRIP"IS "VICE GRIP"AND THEY HAVE BEEN AROUND FOR A LOOOOOOOG TIME, THERE'S OTHER COMPANIES LIKE THEM BUT VICE GRIP IS THE MOTHER COMPANY.
I need training
We going to need some smaller simpler videos for beginners as well
That's in the works!
couldnt download the app
Do you have an android or IPhone?
@@cisnerofam08 iPhone
Please use the correct terminology. Level is a horizontal measurement and Plumb is a vertical measurement.
You are 100% right, thank you for pointing it out!
The take off for 3/4" LR 90° Ell is not 1 1/8 THE BLUE BOOK HAS BEEN WRONG since 1973!!! 1/2"-1" is all 1 1/2" T.O.
Excellent
Thank you! Cheers!