You should put notches into those vertical 2x4 pieces that way the skinnier horizontal pieces can go further into the wall and also that would make the shelves adjustable!
What my shelving idea would be is that on every wood slab used as the framing to have notches created with a screw head then with the platform planks drill holes onto the ends then whenever you needed adjustments you can simply take it off and adjust to that new height.
Honestly I wouldn’t go Andy smaller than the two inch strips mainly due to weight over time. In fact I’d almost reinforce them with a brace or bracelet to add strength
This build has to be a series of jokes, to get comments. If he miraculously was sincere in his statements/build… if he has an actual handy friend, please help this dude out. 😵💫
Should’ve just paid a cabinet person to build adjustable shelves or purchased prebuilt adjustable shelves and mounted them to the wall. Cost more, but in the long run would’ve given you more flexibility
Im confused as to why you didnt add a small strip of wood on the actual wall to give you more support, as far as for the cartridges not being able to fall. Maybe I missed it, but I dont get why someone wouldnt take the time to add those?? But overall, great idea.
If I could add a suggestion. you should look into 3D printed tiered shelves especially for GBA/GB/GBC or even N64. Otherwise I think it's a great idea for your current plan.
it would be cool to use tiered shelves for the GBA or if you can handle the power tools, make an indent in the wood to hold the GBA cartages at different heights.
I've seen these types of shelves used for people with movie collections. Personally, I'm not a fan of them. For anything sitting on the shelf long term, like a collection, I don't think I would use this. For what it's being used for here, it's probably fine.
optimization is not always efficient, time equals money count your time against your cost, is moving a product for better visability more important then just categorizing in and out of a tub, depends on product mass and time dependency... Would you kick a ball to the right with no one guarding the goal no you would just go straight in... But if you add 2 more players you kinda have to pivot maybe even make plays you never thought off before.
Love the idea! Great work :D Would love to resell as well, tried with some high value Gamecube stuff and it quite worked. But we don't have many game-stores here except big chains. Finding used games for a good price is like searching for the holy grail here. On top PAL-games don't sell for as much. So instead of doing as Resell-business myself, I just watch your videos and feel satisfaction :D
It’s genuinely hilarious that he almost put a hole in his ceiling not once but TWICE lifting an 8 foot piece of wood straight up a 9 foot clearance 😭😭😭 Edit: THREE TIMES 💀💀💀
First love the concept of the shelfs for NES, and DVD sized cases looks like you have the space worked out well and are able to handle the product fairly well. Thoughts on improvement: 1) the back corner of the DVD/NES wall will be mostly inaccessible when the cartridge shelves are full. Maybe use it as storage for slow moving inventory or a WhatNot auction storage location. 2 )if these shelves are going to be used to hold the inventory while listed on Amazon. (not just a Spanky work pile of what needs to be cleaned/tested), A tiered shelving system for the N64/GB/GBA/SNES games would be helpful. It might appear to take up more space but you will not have to pick up and sift through the carts before finding the one you need. I enjoy all of the videos on Pesale and Resale and am interested to hear more about how these shelves are working for you
Came to see all the comments congratulating spanky but seeing everyone hate on the shelves is way better😂
9 deep...more than you'll ever need... LMAO 🤣🤣🤣
You should put notches into those vertical 2x4 pieces that way the skinnier horizontal pieces can go further into the wall and also that would make the shelves adjustable!
Came here to say this 😂
What my shelving idea would be is that on every wood slab used as the framing to have notches created with a screw head then with the platform planks drill holes onto the ends then whenever you needed adjustments you can simply take it off and adjust to that new height.
Mate, you have built a problem. If any game on those shelves on the left fall to its side, it’s falling to the ground 😂
Lol yeah
Worst shelves ever
He's dumb as hell!
Yeah, for the walls it would be fine buy damn. Use planks or thicker plywood or whatever as a base.
I would have just used those 1x4 and cut them to fit between the verticals. Same amount of wood, a little more work but hardware but a better shelf.
Heck yea partner!! Them there are some NIIIIICE shelves!
I really like your shelves. I want to do it in my game room as well.
Calling Blu-ray cases “slightly smaller dvd cases” is peak Renix Pesale
Finally a DIY show. You should make a folder for these building type videos.❤❤❤
Probably going to get stain and finish on the bottom of your game cases. Needs more time to dry. Raw wood is better.
🎉Congratz Spanky🎊
Also there's a solution to the shelf just add a bit of wood between the supports and behind that front bit...
I'll dm you on ig if you want to see my storage solution
Honestly I wouldn’t go Andy smaller than the two inch strips mainly due to weight over time. In fact I’d almost reinforce them with a brace or bracelet to add strength
Ikea it is!
That is cool idea 👌
Need a better shelf 😅 but great video
YOU NEED TO GET THOES ALPHABETICAL DISPLAY CARDS LIKE YOU SEE AT GAME OR MOVIE STORES TO HELP YOU FIND A GAME FASTER
Lol definitely
Or chronologically like a madlad
This build has to be a series of jokes, to get comments. If he miraculously was sincere in his statements/build… if he has an actual handy friend, please help this dude out. 😵💫
Big fan but never build anything again
Kramer was onto something... "Levels"
Looks so much better than those plastic shelving units
Should’ve just paid a cabinet person to build adjustable shelves or purchased prebuilt adjustable shelves and mounted them to the wall.
Cost more, but in the long run would’ve given you more flexibility
Im confused as to why you didnt add a small strip of wood on the actual wall to give you more support, as far as for the cartridges not being able to fall. Maybe I missed it, but I dont get why someone wouldnt take the time to add those??
But overall, great idea.
If I could add a suggestion. you should look into 3D printed tiered shelves especially for GBA/GB/GBC or even N64. Otherwise I think it's a great idea for your current plan.
it would be cool to use tiered shelves for the GBA or if you can handle the power tools, make an indent in the wood to hold the GBA cartages at different heights.
Am i missing something? Whats the benefit of having the gap beneath every shelf? Wont the games fall through if they turn just a little?
I don’t get it. Why not just build short shelves that go to the wall?
Very cool video, I wanna do this in my game room too!
Bruh...😂😂😂😂 those have a lot of issues
Caleb, you could use “corner round” / crown molding for your N64 games to face front
Bro, just go to IKEA.
Why did you stain the wood and not just paint it same colour as the wall????
This man even has a level!
found some old games recently.. what do you use to clean them?
I've seen these types of shelves used for people with movie collections. Personally, I'm not a fan of them. For anything sitting on the shelf long term, like a collection, I don't think I would use this. For what it's being used for here, it's probably fine.
9:09 “intelligent” 😅😂
What color stain did you use?
You can never be too efficient
Thanks for sharing like always
optimization is not always efficient, time equals money count your time against your cost, is moving a product for better visability more important then just categorizing in and out of a tub, depends on product mass and time dependency... Would you kick a ball to the right with no one guarding the goal no you would just go straight in... But if you add 2 more players you kinda have to pivot maybe even make plays you never thought off before.
Feel like you should’ve just used 1x4s horizontally and got your a pocket hole jig to attach them together inside your vertical pieces.
Would’ve been ideal but… not everyone thinks like that😂 that’s how I would’ve done it
@@daydrmr3391 a KREg jig is so cheap and easy to use. I’ve build all sorts of furniture with mine
Just normal shelves would have worked fine. IKEA do tons. That was made much harder than it needed to be 😅
This is several times cheaper than Ikea shelves.
3d print something to stagger the cartridges
Do you have a link to your Amazon storefront?
This is neat
I
K
E
A
😅
Are those house shoes? Or the shows you wear outside too?
How do i buy from you
congrats Spanky
The n64 shelves you build correct that’s how the other one should had started
Caleb is not smart when it comes to shelfs. it could be done way better. lol
Love the idea! Great work :D
Would love to resell as well, tried with some high value Gamecube stuff and it quite worked. But we don't have many game-stores here except big chains. Finding used games for a good price is like searching for the holy grail here. On top PAL-games don't sell for as much.
So instead of doing as Resell-business myself, I just watch your videos and feel satisfaction :D
It’s genuinely hilarious that he almost put a hole in his ceiling not once but TWICE lifting an 8 foot piece of wood straight up a 9 foot clearance 😭😭😭
Edit: THREE TIMES 💀💀💀
Hi Caleb!
First love the concept of the shelfs for NES, and DVD sized cases looks like you have the space worked out well and are able to handle the product fairly well.
Thoughts on improvement:
1) the back corner of the DVD/NES wall will be mostly inaccessible when the cartridge shelves are full. Maybe use it as storage for slow moving inventory or a WhatNot auction storage location.
2 )if these shelves are going to be used to hold the inventory while listed on Amazon. (not just a Spanky work pile of what needs to be cleaned/tested), A tiered shelving system for the N64/GB/GBA/SNES games would be helpful. It might appear to take up more space but you will not have to pick up and sift through the carts before finding the one you need.
I enjoy all of the videos on Pesale and Resale and am interested to hear more about how these shelves are working for you
Sloppy handful and nine deep were my two favorite things you said in the video. I don't think you realize how unintentionally funny you actually are.
Phoenix bro you did not build it correctly
1x1s wouldn’t hold the weight
Made my whole game collection shelves with 1x4’s. Wish I could show you Caleb lol
You should come to see my set up where I hold 200,000 dvds and cds and my custom shelf
New Channel Idea:
Phenix Rebuilds
Was actually talking about putting some shelves n my game room last night, maybe not this nice of ones but very good job
Renix the builder
You're overthinking your face out shelves. Grab some quarter round and attach them flat side up. That's what I use to display games.
You did the reverse that wood should of been inside then the rest
Shelf Time
I Love the design. Your room looks great. Shout-out to the ARKANSAS PICKER
strange
this is ass tbh lol love the vids tho XD
The first one here lol
hay
ello
Ngl these shelves look terrible.
Cool content - keep robbing people if it means this type of content. 💯