How to make a car decal (Silhouette Cameo 3)
HTML-код
- Опубликовано: 25 авг 2024
- In this video I show you how to make a car decal with your silhouette cameo 3 using oracle 651 paper. This is a perfect service to add to your business to make extra money and I show you step by step. Why because everyone needs a little help and if you have to drive to get out and do it and I can help you then i'm gonna lay it out for you so you can make it happen. Follow along and leave a comment. Let me know how yours turns out. Like, comment, share and most importantly subscribe for more stuff like this and more.
Items used in this video are listed below.
For the best deals on Heat Vinyl transfer and other t shirt making equipment visit Heat Transfer Warehouse and use my affiliate link below
www.heattransf...
Oracal 651white amzn.to/2TLhjWC
Roll Transfer Paper w/ Grid-for decals amzn.to/2P5vCBV
Silhouette Cameo 3 amzn.to/2BCisIU
Cutting pad amzn.to/2KCjzeI
Xacto knife amzn.to/2KAKB66
Silhouette Hook amzn.to/2DPylx9
Scraper Car Rubber Vinyl Sticker Installation Tool
amzn.to/2ShQxDP
For collaborations and business inquiries, please email me: adubbproductions@gmail.com
GoPro Hero 7 Black amzn.to/2zZAWSX
GoPro Hero 7 Silver amzn.to/2IMaVJw
GoPro Hero 7 White amzn.to/2ILkbOf
SONY-FDR X3000 amzn.to/2hNRZf3
JOBY GORILLA POD amzn.to/2Et83zq
FOTODIOX GREENSCREEN amzn.to/2roav7m
IKAN iLED6 amzn.to/2DiiZyp
Dji Mavic air amzn.to/2pKW8Gw
DJI PHANTOM 4 amzn.to/2gJ31Gc
DJI PHANTOM 4 PRO amzn.to/2hNLF74
DJI MAVIC PRO amzn.to/2hNPr0p
PANASONIC GH5 amzn.to/2QzE8u7
RODE VIDEO MIC PRO amzn.to/2hNMyfU
Delkin TRIPLE Fat Gecko Three-Arm Suction Mount amzn.to/2GyKbLh
Fat Gecko Camera and Camcorder Mount amzn.to/2GANvWm
----------------------------------------------------
DON'T FORGET TO SUBSCRIBE.
----------------------------------------------------
Also check out my other websites
If you want tips and tricks and suggestions on how to make your next production better click the link below.
adubbproduction...
Your one stop shop to look at what a gopro is really capable of capturing. Click the link below.
goproshoots.com
![[Special Clip] ATEEZ(에이티즈) 홍중 'Why Do You Love'](http://i.ytimg.com/vi/I6XYXQKN_pY/mqdefault.jpg)
What do u rec with and nice video 👍
Jackinslayer Thanks. I record with the Panasonic LUMIX gh4. The key is good lighting.
3
anytime I want to do a new project and dont know where to start I always come back to you because your videos are always soooo helpful so thank you!!
Another hint. If you know you have a project coming up. Pre prep your rolled vinyl- unroll it and lay it flat. 👀 so you’re not working against yourself lol set something on it and let it relax. I take all of my rolled vinyl out and lay it flat (if I have a project coming up that I need a roll for I get my measurements and then I precut and then lay it flat! Hope that helps!
Great video. Now I’m gonna make me a sign for the back of my truck
Bonnets 2 Getha great suggestion. That would work for a person that is organized and a good planner but I do almost all of these videos unplanned and spare of the moment. I literally get up and decide what I want to show people. I also try to show most of the steps from start to finish. Preparing vinyl a day before and flattening it is a great idea but I’d have to record that step too. A day in advance. That’s more work for making the video. Great advice though and makes one hundred percent sense.
@@adubbproductions what?
Cool idea I have a silhouette cameo.
I just found you. I will be checking out more videos. Thank you for this tutorial. You're a breath of fresh air.
Great detailed video! Even w/ the hassle of getting the vinyl on the mat shows that no one is perfect and it’s the kind of stuff that happens to me so it’s comforting knowing it happens to others too 😩😂 and you edited most of it out so good video and next time the ‘#’ LOL had to pause the video to comment that 😅
Destiny Garcia Thank you Destiny. I appreciate you. Thanks for the compliment. It is important for people to see not only the details but the minor complications they are going to encounter. If you don’t know it happens a lot if the times people feel defeated and quit. Thanks for watching. I appreciate you.
What’s your decal cut settings?
"Boom boom. come install it. Bam bing" 🤣😂
Lots of great information in thus video. Thank you for making everything clear and concise.
The Ezee Life your welcome. Thanks for watching.
Your information is great. Its like learning in real time. Thank you. 👍🏻
Cool I am thinking of doing that eventually but I am going to do t shirts.
AWESOME INSTRUCTIONAL VIDEO!!!
Thank you.
@@adubbproductions You’re most welcome. Of course, I realize you have stepped up your game in cutting and printing equipment, however I’m still learning to use my Cameo 4 cutter. I’m really happy with it so far because it’s much better than my CRICUT Explorer Air 2 in so many ways. It cuts up to 10 feet, I can save and KEEP my own projects, I can cut rhinestone flock templates, and I can DRAG AND DROP images with Silhouette Studio. I have the Business Edition. I wish I had known about the Silhouette and the Siser cutters when I begun my crafting journey. But it is what it is, and I’m seeing so many different options out there. When I’m able to get another cutter… and the prices go down, I do plan to get another quieter, more efficient cutter like the Romeo or the Cameo 5 Plus. I do want a wider format cutter and sublimation printer eventually, but right now, I have to wait until I can get them. So meanwhile, I’m trying to make the best of what I have.
I know… too much information… but I just wanted you to know where I am in my crafting journey. I’m still learning, and I’m doing my best with what I have.
Thank you for replying to my comment!
Thank you for you video.
Waaaaaay better explanation than other videos 🙏🏾
Aydo Wue 🙏🏾 Thank you. I appreciate that. Thank you for commenting. Don’t forget to subscribe and like. I appreciate you.
Good job.
you the man brotha, thanks for the simple and easy to follow instructional video!
No problem. Thank you for watching. Don’t forget to subscribe. I appreciate it.
Tell Grandmom "Thank you for raising a good, hardworking son."
I’m sure this is common sense, but I just wanted to point out to make sure your surface is clean before applying your decals. Awesome job though!
very helpful. Thanks for showing everything!
No problem. Glad i could help. Thank you for watching.
I take my hat off to you for this I thought I wanted to get into this to I don't think so I'll leave it up to the pros
Jean Walker lol. It’s not that difficult. Lol
That was real helpful bro. Thank you. I'm new to this. I just got my heat press and Cameo4. Looking at your videos really helps alot.✊🏾💯
penny saved penny earned like how you make the most of what you got
Well said.
Great video very helpful
Georgia Harris Thank you and thanks for watching.
Great video!
Thank you
Thankyou, this video is just what I needed :)
This is very good I thought I wanted to get into this but I don't think so I'll leave it up to the good people that can do this hope to work with you soon Jean
TY for the video! 💰
No problem. Thank you for watching.
that was very enjoyable and very helpful thank you mate! 👍👍 great attitude and the best of luck to you for the future 👍👍
Thank you. I'm glad I could help.
Tysm.
You deserve a lot more likes great job explaining !
Great Video 👏🏾👏🏾👏🏾
Thank you. I appreciate it. Thank you for watching.
Thank you :)
Your welcome. Thanks so much for watching.
Super video, thanks so much for the info
thank you showing you putting it on the car thats the part i was troubling with my letters was not sticking to car and was just coming back up
Now the fight with the big mat ? Been there, done that and now using a wall or closet door for line the vinyl up on the big mat, and yes, i all so start in side the lining up. So i tape the mat from up in the wall / door and never again have that fight when lining the vinyl. Try it for once.
Tip for u use small drop of washing up liquid to water in spray bottle and spray on once applied along line then wet finger with liquid spray then wipe off in on go
Really Good video... Very detailed 👌🏾
Hey. Thank you. I really appreciate it.
Can’t thank you enough, big help
No problem. Thanks for watching. 🙏🏾
Great video
marilyn jack Thank you. And thanks for watching. I appreciate it. Don’t forget to thumbs up and subscribe.
Salute, I've learned so much about customizing watching your videos.My Business is doing Extemely well.. keep up the good work !!
CEO Allen Pough of Allen Pough Productions ,Entertainment Music Group, LLC
Salute right back. I appreciate you watching. Congrats to you and your business. Keep up the great work.
if you were standing up and had a slightly bigger work area it would make a world of difference great video thanks for the info
Your welcome but would a bigger with area and me standing change the information or would you just like if I had a bigger work area and was standing? I’m just trying to understand your logic. I’m a little lost help me understand please.
In my observation it looks to me that you are rather tall and the space you work in is a smaller area and you have trouble maneuvering the vinyl roll to flatten it out when you had to cut away would it have been easier to lay the vinyl had you been standing up and not fighting the. Table and vinyl.
@@slimsautomotiverepair8714 hmm. That’s interesting. Observing things can vary so much from person to person. I don’t feel like I had any issues with space. That room was practically empty. I think you are mistaking my positions my body in a certain way so the camera can capture what I’m doing because I’m making a video with needing a bigger space. Arguably if I was in a bigger space in this video in particular you might not have been able to see what i was doing because the camera would be too far back. In any event I am still not making the connection to what the space size and me maneuvering has to do with delivering the information. You said yourself thanks for the video and that is was a great video. If you got the information you needed what does the size of the room matter? I could have gave the information out of the trunk of a car if the information was accurate and people got the point. The production could always be better but this is RUclips. People like me deliver information to people like you for free. Perhaps you should donate to help me get a bigger space so the information can make a world of difference and do a better job. I would really appreciate it. I love to have a bigger space so I can stand up and move around. Any help would be appreciated. You can send your donation to my cash app cash.app/$adubbproductions
Thanks so much in advance. I hope it’s enough to get a bigger space so I can stand in the next video. Thanks again. 🙏🏾
No connection between the info in video and space in the room the info was fantastic. I even subbed to get more info. If I could donate my man I would but has to close my own shop due to hard times and could really use the subs to get my channel and info out to the people for free as well.
Thank. You -
Nora Shuda your welcome. Don’t forget to subscribe.
you actually don't even need to use the cutting mat, just load the vinyl directly into the machine and select "No Mat". Then you only have to cut out what you actually used... and it's quicker
I’ve done it like that once. I’d have to explore that option more before i give anyone instruction on it. Are your cut settings the same when you cut without the mat?
You also need to use more vinyl don’t you? The machine needs the extra to hold onto!? Correct?
You can literally take the roll of vinyl and feed it directly into the machine and just let the rest of the roll kind of hang off the edge of the table. Under 'Page Setup" select "None" for cutting mat and the default settings for Matte Vinyl (speed 5, force 10, 1 pass) will cut it perfectly.... also, have you figured out how to cut something bigger than your mat yet? If you are doing car decals, you'll want to know how to do that! After your decal cut job is done, just unload the vinyl from the machine and scissor cut the part you need off your vinyl. If you are left with like a square or something, save that and use the mat for maybe cutting a small decal out. Just turn on the grid marks on your page setup so you can be sure your design will fall within the piece of vinyl on your cutting mat.
Awesome. Thank you for that. Great information. I appreciate it.
April Marie thank you for the info!! Very helpful!
LOVE VIDEO
awesome!
boom and thats how its done..
Lol.
Your videos are great. Any suggestions / tips if I want the decal on the inside of the glass?
Same exact process. I had text inside my backseats window when i used to drive Uber. If you want the people in the back seat to read it the do the same exact way but mount it to the inside. If you want people on the outside to read the mounted decal then mirror the image/text before you cut it
Can you make a video on how you made the design for the car decal ? I would like to learn how to do a design like that
When I am trying to apply rolled vinyl to a mat and I go with the shortest side of mat....you were fighting it pretty bad on the length side with the whole piece of vinyl rolled out...I roll it or re-roll it if you have to so that the right side is ready to place on mat...I hold the rolled section with my 4 fingers and use my right thumb to start on right corner short side of mat.....and then go to left side and use thumb to place the left vinyl corner down....middle will automatically level out...them just roll the rest of vinyl out onto the mat....without having to deal with the rest of vinyl getting stuck to mat
What's the cutting settings that you use?
What the difference between transfer tape and transfer paper?
Thanks for the video..have a customer needing 200 4x4 decals and I was needing to know about how much vinyl do I need in total
And where I can order from
@@cruseboomerangeffect Amazon lol
What’s your decal cut settings
That looks like a lot of hard work but it looks good. You always give good detailed information. Thanks
You're welcome Vicky. I appreciate you watching. I try to make it so people can really understand so they have no excuses not to get out there and make some money. Thank you as always.
I learned Alot from this video thank you. I was hoping you were going to show how the big design came out lol
Streetz 180 I’ll make a video showing how to install the big one. I didn’t put it on the back of my moms car because her rear window was really small. It wouldn’t have looked right in that tight space and also i was losing daylight and i wanted to complete the video for you guys. I’ll find someone else thy want something big out on and make another one for you guys. This is actually the second time i made this video. Lol this first time I went to edit and half the footage had no audio because i didn’t turn on my video mic pro. Smh. Not the first time i made that mistake either.
@@adubbproductions who the hell is streets 180. Don't know why they come up on my inbox.
That’s because he commented under your comment instead of in the main video comment. Honest mistake. Don’t worry. You won’t see his comments regularly just a little mistake that’s all.
very helpful. New sub here!
Thank you and thanks for watching. Welcome.
Una pregunta corte sin querer la parte de abajo sin el tapete ¿como se llama se puede cambiar? Es la tira blanca que toca la cuchilla ba pegada abajo en la Cameo 3 ayuda
I dunno if it still doing videos but I love how u go step by step. Bc I'm not very savvy on the art world. But when I print my design onto 651 the design itself does not stick I've wasted so much 651 to try and work it but nothing does. Any ideas
why didnt you use #1 instead of number 1
Good point. Didn’t think of it at the time. Thank you for pointing that out though. Maybe I’ll change it. Thank you for watching. I appreciate it.
I have the drawing skills but not the technical skills . Drives me nuts
Can you use the same paper to use on truck door
What kind of vinyl for a shirt??
Subscribed -
Is transfer sheet and transfer tape the same? If so, which one do you use? Same brand as vinyl oracal?
Good Question. Id have to say no they are different. With this Oracal 651 the transfer tape that Im using has the color of that traditional old school scotch tape that can rip easy kinda like paper. that dark tan color. Transfer sheet is more so dealing with a specialty vinyl that you dont press on the regular way. you have to transfer it using a Transfer sheep then press the transfer sheet with the image on it to the garment. Transfer sheet is normally I think maybe in all cases transparent. do not try to heat press transfer tape. Ive never done it but I don't think it would end well. transfer sheet, you Can heat press. Hope that helps.
I can’t get my Bluetooth to connect what’s the secret bro. Great video. 👍🏼
Hey Eloy, have you checked underneath the Silhouette, there is a compartment with a screw , this is we’re there the tiny USB Bluetooth sits. My Silhouette says compatible but I don’t have the Bluetooth connector. We can purchase one but it has to be a certain model code, this information is online . I hope this helps you.
Work with PC? Great instructional video
Currently with my car I wanna get a side shot silhouette of it in like a sticker but none exist for mine is it possible to make those if you know than make the sticker?
Boom!
will this work for fiberglass or aluminum boats
I’m positive it should work on both. Aluminum I’m a little scriptural but it should tack onto it and hold. I haven’t tried aluminum.
What app u used to make that
What is the best way to make a 4" x 30" 2 color vinyl decal? Thanks.
The best way is to use the equipment you have and make it. A cameo 4 can do that. What equipment do you have? If you have a cameo 4 you can create the decal in silhouette studio and cut it with the vinyl cutter
@@adubbproductions Thanks for getting back to me. I have a cameo 3, the way I make long 2 color windshield decal 4 x 30 or such) is cut both colors, using transfer tape on the top color align, lay on the bottom and pull of the tape, the problem I am having is bubbles form between the the 2 vinyl layers. Any thoughts on that?
Sup, thanks for the video very educational. I am about to buy a cameo myself for first time. I wanted to ask you. Do you recommend this sticker for tire lettering as well if not what do you recommend? Perhaps you've done a video of that already. If not tire lettering is pretty popular and expensive. Boost up your business. Please respond what vinyl material or style i can use. Thanks and keep up the great videos.
Thanks for watching i appreciate it. No vinyl is going to last on tires. Tire stickers and adhering to tires isn’t something that is available or as far as I know with any of these cutting machines and they don’t sell the material to be used. It would fall right off. If you got it in it would fall off on the first ride. Sorry.
@@adubbproductions thanks for the feedback. Appreciate it
You need a 4" x 25" quilt ruler.
How do you find your customers? Thanks
There are many different ways to find customers. Especially today with social media. I’m gonna make a video on it. But promotion is the main way. Post what you make and wear what you create is on way you can start getting customers. If people like it they will ask you about it. Start there. I’ll make a video on all the different ways I find customers though.
This is where I am now as well! I’m on IG, FB, Tik Tok, Pinterest, and Etsy. Next up are google and Yelp if I can figure those out. Started wearing shirts I’ve designed to be my own walking billboard. We have to keep creating, doing our best to promote and prayerful that the clients will come
PLEASE HELP Just purchased Cameo 4 having registration mark issues. everything is correct I even cut a piece and now it won't completely frustrated and in need of help from start to end. :)
You can reach out if you’d like at Adubbproductions@gmail.com
@@adubbproductions Sure willThankYou
Can the cameo connect to your cellphone
Stella White Yes in the App Store there is a Silhouette app. Hmm🤔 that would be a great video. Thank you for the idea. But, to answer your question yes it can.
A-Dubb Productions Allan Wade my question was rather than connecting to a laptop or desktop computer, can you connect through Bluetooth on the cellphone? I know you can with the Cricut I was wondering if you can connect through Bluetooth with Cameo.
Stella White I have to be honest. I haven’t checked yet but I am pretty positive that you can because in the Silhouette app on my cellphone there is an option to send to cutter and it says no device connected just like the computer would say when the Bluetooth isn’t connected. Also there is no way to connect a usb cable to a phone. I’ll make a video and show you what I’ve found.
A-Dubb Productions Allan Wade Thank you so much
Your welcome Stella.
Can this model cut up to 11x17 images
sworley1956 yes. the cameo 3 and 4 can cut up to 12x24 inch designs and images.
So if you want it inside on your window, you have to flip it?
Yes. Mirror it. I think. Lol. Never tried that. I still have mine on. Been threw the car wash a bunch of times. Never came off.
If I had a nickel for everytime he says BOOM
Just to help you out bro if you plan on doing this for awhile with the cameo instead of a plotter with a stand and rollers you should invest into a a roll feeder for the cameo it costs 23 dollars and it saves you from having to waste so much time and effort messing around with those useless cutting mats.
Awesome video! Can I use any type of vinyl other than Oracle? To be completely honest, I don't know one type from the other.
Not that I know of. I think you have to use oracle. It’s a different type of material than what we use for shirts.
@@adubbproductions Thank you for the quick reply. I appreciate the info. :)
No problem. Thanks for watching. I appreciate it.
I need help with my pricing structure, I'm open to anyone helping me.
How do u design it on the computer I can’t find the website
Jeffy It was design on silhouette Studio Designer edition. The regular silhouette Studio can do this design also. I believe the website is www.silhouetteamerica.com
A-Dubb Productions Allan Wade is it free
I think Silhouette studio basic is free.
Did you use like the heat transfer paper
Cressida Thomas Hey Cressida thanks for watching I appreciate it. Don’t forget to subscribe. To answer your question no, you do not use heat transfer vinyl to make these cat decals. You have to get Oracle 651 and transfer paper. I have the stuff you need listed in the description below the video i believe if not I’ll put it there. Please use my amazon link to purchase those items or anything else you wanna buy off of amazon. Also don’t hesitate ask me anything else about this process. I can make a video for you again with more detailed steps if necessary. Thanks again for watching and don’t forget to hit that subscribe button. Talk to you later and good luck.
No lie, I thought this was Adrian Peterson at first.
Every time I send something to cut it never cuts and always show the registration error and I did it exactly how you did 😫
where did you get your mat from
Question: Is this material god for jet skies?
I want to add a phone number to my business truck. Do I mirror the number like I would words?
When you are using the method I show in this video do not mirror anything.
👀
ok, I'm new to this... I thought Oracal 631 would be used not 651 🤦🏾♀️
You can use either. 631 has a matte finish 651 has a glossy finish but you can use either.
How do you price your car decals? Thanks
In most cases I charge based on the size of the decal and also charge a one time set up fee for reproducing the graphic.
Adrien Peterson?
Kyle A lol. I get that all the time.
that;s ok I found me one
Can I use photoshop for my designes?
Jumper OG illustrator. Photoshop doesn't make images in vector and that's what you need for a vinyl cutter as far as I'm aware, illustrator will create images in vector
is that the free software for cameo 3?
Hey. Thanks for watching. Don’t forget to subscribe. It’s an upgraded version of the free software.
Are CAr decals still a thing? Wondering if I should pursue this
It’s always better to have a skill than not. Things always come back.
@@adubbproductions Thinking about making BLack LIves Matter Decals. I am looking at the Epson printer you have. Which model is it and how many tees can you get out of one set of inks. Coldesi has DFX i550 that has sublimation toners at $1300 yielding 2500-3500 prints. Expensive!! Looking for a more economical QUALITY option.
Cool. It's crooked though.
Just sayin'
Lol 2:10 bam bing? Lol
Kevin Hart does signs now 🤣🤣🤣
Boom, here is my comment, boom.
P.S.
Boom
Boom. I love it. Boom.
I need help importing lettering to the cameo to begin my logo cuts. Can you do a video on that
Why do the other people's messages come up on my replies.?
Hey Vicky. No worries. I think he just commented in the wrong place. Not worries. Honest easy mistake to make.